I Flashed my sprint(G930P) with G930PVPU4APL6 (AP, CP, CSC) without the Bootloader (BL), everything went well, but when I Flashed the Nougat update (G930PVPU4BQAA) phone reboot and blinked twice the Recovery mode then the Galaxy S7 logo kept Blinking for Ever and stuck there, Note I Flashed Nougat Files(AP, CP, CSC) only without the Bootloader (BL), because I just wanna try it, so if I don't like it I can go Back To lovely Marshmallow, is it because I didn't Flash the Bootloader I have this issue(Bootloop), what is a safe way to Flash Nougat without sticking with it.
Related
HELP!
i downloaded the na6 firmware for n9005, processed to flash it in odin by putting the tar file in ap section and checking the upload boatleader box,
odin showed a pass, but now my phone is stuck at the note 3 logo, i can only boot to download mode at the moment, so what would be the best thing to do right now? also, i have an official 4.3 firmware, can i flash it back? please help
any help appreciated.
edit: i seems that i restarted the phone immediately after oding finished flashing
i reflashed the same file and now it booted
After flashing a German Note3 with stock 4.4.2 using Odin with the official Open firmware from Poland XEO N9005XXUENB3 the phone is really slow, the SIM card is not recognized and the device has boot loops. The flash process succeeded and factory reset and cache wipe were executed from recovery mode.
Only from recovery mode KOT49H.N9005XXUENB3 it successfully boot when it is again stuck with the boot logo.
In the recovery mode the yellow lines below indicate that the CSC-code DBT (Germany)
The official file was flashed using the AP field and the file: N9005XXUENB3_N9005OXXENB1_HOME.tar.md5
The reason for flashing was to be able to switch to Vietnamese which is available in the XEO firmware.
The phone should have been unlocked because a Lebara SIM card worked before which is no longer being recognized.
Is there a way to restore the functionality within this firmware or do I need to go back to a different firmware ?
I would not mind also trying a Lollipop stock rom but currently do not want to try tripping Knox.
EDIT: Baseband and IMEI is UNKNOWN
EDIT2: Flashing back the DBT firmware N9005XXUGNG1 resolves all these problems but I would still like to be able to switch to Vietnamese (Viet Tieng) language
My galaxy is soft bricked, I can't enter TMRP or flash anything on it using Odin. The only thing that successfully "flashes" on is OG1 firmware, however it still is bricked even beyond that. I accidently ticked Nand erase on my device when I was trying to flash a different rom onto it now it's soft bricked and I can't get past the virgin mobile screen. When I flash og1 firmware onto it, it resets and goes onto the base android recovery. It loads up until about halfway where it crashes and the device reboots again back to the brick state. I've put the custom recovery mode on it along with the firmware to see if that would do anything, I put another og1 firmware on the SD card which is useless because I can't get into the custom recovery mode.
Try flashing this recovery firmware - only just discovered them today, but apparently they contain more partitions than the stock ROMs do
Samsung G900P Galaxy S5 Sprint USA Repair Firmwares:
Download: - G900PVPU1ANE5 / SPT1ANE5 4.4.2:
http://www.4shared.com/rar/hMwqizW9ce/G900PVPU1ANE5_SPT1ANE5_442_Rep.html
Contains: (PDA, AP, Modem, Phone, CP, BL, Bootloader, CSC, PIT)
Source:
http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82
Hi guys
Ive flashed this device and everythings fine in odin, just that when it restarts in the boot menu on the Samsung logo, and i cant Wipe/Factoryreset since it comes up with the mdm error.
ANY ideas?
what did you flash to your device >.>
I flaashed A stock firmware from Odin, i Odin itself it goes as it should
OK. First some info about the phone:
GT-I9506
S/N: RF8F20W841T
PDA: PL2 / PHONE: OJ2 / CSC: OK1 (NEE)
I replaced the screen few days ago and got the phone working at last! It was with STOCK 4.4.2. So i used OTA to update it to latest STOCK 5.0.1. After this I have rooted it with CF-AUTO-ROOT and it was fine for two days.
After two days wile charging with S CHARGER COVER (OEM) it just restarted. Was working ok but after few minutes hanged and rebooted again. Then the bootloop appeared. First screen with GT-I9506 logo and then blue flash and again.
CAN'T BOOT IN TO THE SYSTEM (no matter what I can't make it to boot properly)
CAN'T ENTER RECOVERY (it's showing that's booting in to the recovery but instead of recovery it just restart)
CAN ENTER DOWNLOAD MODE (no problem with entering DM)
What I have done so far:
- Kies recovery with phone model number and serial number (still bootloop).
- Odin flashing STOCK rom from SamFirm download (still bootloop) (single and 4 files flash).
- Re-partitioning (flashing PIT file).
- Reflashing bootloder (still nothing).
- Tryed CWM, TWRP and other Recovery, non of them boot up.
Using those files to flash:
AP_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
BL_I9506XXSDPL2_CL6069869_QB11747892_REV03_user_low_ship.tar
CP_I9506XXUDOJ2_REV00_CL1318424.tar
CSC_NEE_I9506NEEDOK1_CL6069869_QB7017077_REV03_user_low_ship.tar
I would really appreciate help from someone more skilled then me.
Is it possible that I should flash 4.4.2 STOCK ROM instead of 5.0.1 to revive it? I came with 4.4.2 so maybe to make him work again I should start from flashing STOCK 4.4.2 NEE?
UPDATE:
STOCK FIRMWARE 4.3 and 4.4.2 does not help... I'm out of ideas...
After flashing bootloader it self I manage to get to the point when Green Droid appear and after 30% of progress it restarts and bootloop is back again...
Uninstall any old drivers and install new drivers.
Download the official file latest for your device from here
And try to reflash again, it should work or ultimately you will have to buy a new motherboard for your device....
You are likely to have encountered a hardware fault, assuming everything you tried were done correctly. The only fix is to buy a new phone, because of Samsung's stupid Knox policy D: