HELP!
i downloaded the na6 firmware for n9005, processed to flash it in odin by putting the tar file in ap section and checking the upload boatleader box,
odin showed a pass, but now my phone is stuck at the note 3 logo, i can only boot to download mode at the moment, so what would be the best thing to do right now? also, i have an official 4.3 firmware, can i flash it back? please help
any help appreciated.
edit: i seems that i restarted the phone immediately after oding finished flashing
i reflashed the same file and now it booted
Related
I have a Galaxy S4 SPH-L720T was trying to install an update to a rom i was testing out and my battery was at 25% and i was about to plug it in and the screen was black but it turned back on and the firmware was all messed up and it said my baseband version was unkown and i tried to go into recovery (TWRP) and it wouldn't load up so i booted into download mode and then i tried flashing a stock firmware and it failed so i cant boot into recovery/system but i can get into download mode but i have been trying to flash the stock firmware but it says i have no PIT partition. Please help me asap my phone is the Sprint SPH-L720T 16GB. Thanks
My S3 Neo I9300I ran stock 4.4.4 KitKat with TWRP 2.7.1 and I tried to install a custom Lollipop rom which did not work so I had to reflash the stock firmware.
After reflashing the firmware with Odin, everything was fine except that the Wifi option was greyed out and unresponsive so I coudn't connect to Wifi. I tried many of the options specified on threads related to this particular issue but to no avail.
Second time I tried to reflash the firmware with Odin, Odin showed "PASS" after which I unplugged the phone and found out that it didn't boot at all, even into Download Mode. No key combos etc worked.
After some Googling, I found out that writing a debrick file to an SD card and inserting it into the phone could get the phone into a bootloop while booting normally and into Download Mode while holding VOL DOWN+POWER+HOME. Without the SD card though, the phone was completely unusable as above.
I then tried flashing the firmware and TWRP again with Odin but still the phone won't boot at all, and inserting the debrick SD card could only get it into Download mode.
Would flashing a firmware from a different region help? Or have I ruined the bootloader? Any help would be greatly appreciated...
malinmva96 said:
My S3 Neo I9300I ran stock 4.4.4 KitKat with TWRP 2.7.1 and I tried to install a custom Lollipop rom which did not work so I had to reflash the stock firmware.
After reflashing the firmware with Odin, everything was fine except that the Wifi option was greyed out and unresponsive so I coudn't connect to Wifi. I tried many of the options specified on threads related to this particular issue but to no avail.
Second time I tried to reflash the firmware with Odin, Odin showed "PASS" after which I unplugged the phone and found out that it didn't boot at all, even into Download Mode. No key combos etc worked.
After some Googling, I found out that writing a debrick file to an SD card and inserting it into the phone could get the phone into a bootloop while booting normally and into Download Mode while holding VOL DOWN+POWER+HOME. Without the SD card though, the phone was completely unusable as above.
I then tried flashing the firmware and TWRP again with Odin but still the phone won't boot at all, and inserting the debrick SD card could only get it into Download mode.
Would flashing a firmware from a different region help? Or have I ruined the bootloader? Any help would be greatly appreciated...
Click to expand...
Click to collapse
did you use the india firmware? Yes try different regions.
YES!! The firmware I tried to flash earlier was the Sri Lankan firmware but I flashed another version from Trinidad and Tobago and now everything's back to normal Thanks a lot!!
Today i was trying to install the Android Marshmallow 6.0.1 on my Galaxy S5 Snapdragon via Odin, i downloaded the firmware from Sammobile, i verified that the phone model was exactly the same as named on the firmware, i place the .md5 file in the AP slot and everything was ready to go! (The phone was already plugged and in Bootloader mode, and drivers were up to date) then when finishing the flash Odin FAILS to complete the flash and the phone is left with nothing than the Download mode, i panic and try to access recovery mode but realize that there´s no recovery....I proceed to install the recovery.tar into my phone and it works, i start the phone and Samsung logo comes up, finally it loads and does al the process after you flash a Samsung phone.
Everything works just fine!...except for one thing, THERE´S NO RECOVERY!!!. The phone works perfectly but when i try to enter recovery mode, it sends me to Odin mode as it displays a message saying that failed to boot into recovery.
Please help me i don´t know what to do.
Thanks!
Just flash a custom recovery like twrp or cwm
Already did...same problem, recovery won't boot
adavicco said:
Already did...same problem, recovery won't boot
Click to expand...
Click to collapse
You need to flash a pit file to complete the install correctly.
Hi guys
Ive flashed this device and everythings fine in odin, just that when it restarts in the boot menu on the Samsung logo, and i cant Wipe/Factoryreset since it comes up with the mdm error.
ANY ideas?
what did you flash to your device >.>
I flaashed A stock firmware from Odin, i Odin itself it goes as it should
I tried to root my phone today but after reboot, it got stuck in the boot screen which says "Samsung Galaxy 8+". I can only go to the download mode. I tried downloading the stock firmware and tried to flash it using Odin but the flash always fails to give a Fail! (DeviceInfo) error.
I don't know what to do. I am afraid the phone is not charging as well, it the battery dries out my phone will be dead. What should I do?
Did you try and root the new AQG5 base? Flashing TWRP or CF Auto root will fail if you do so. If this is the case then follow the guide @Nameless provided https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857 and throw him a thanks.
If you didn't do that and Odin still continues to fail when flashing stock you should give Smart Switch a try and go for an emergency recovery. You will need your device model number and S/N code ready. http://www.samsung.com/dk/smart-switch/
i have the equal problem my s8 stay in boot screen and in odin fail stock firmware! plz help me TT i can go the download mode but cant flash stock rom with odin