Lenovo Zuk Z1 Update | Restart Issue - Zuk Z1 Q&A, Help & Troubleshooting

Dear All,
I am using Lenovo Zuk Z1 from past 8 months. But somehow from past couple of months it re-starts a lot and also it says its launcher has failed. However i have fixed the launcher issue by installing Google Launcher. But the re-start issue is still occurring. It occurs when i am using app and then suddenly the app hangs and it re-starts. Are any updates being roled out or are they expected in near future?
Kindly help with this I have checked there are other ROMs available as the Cyanogen has stopped its development, but its being taken over by Lineage OS which were initially the part of Cyanogen OS team. would like to know the ROM's best for the lenovo Zuk Z1.
Thanks in Advance.:good:

ashish511 said:
Dear All,
I am using Lenovo Zuk Z1 from past 8 months. But somehow from past couple of months it re-starts a lot and also it says its launcher has failed. However i have fixed the launcher issue by installing Google Launcher. But the re-start issue is still occurring. It occurs when i am using app and then suddenly the app hangs and it re-starts. Are any updates being roled out or are they expected in near future?
Kindly help with this I have checked there are other ROMs available as the Cyanogen has stopped its development, but its being taken over by Lineage OS which were initially the part of Cyanogen OS team. would like to know the ROM's best for the lenovo Zuk Z1.
Thanks in Advance.:good:
Click to expand...
Click to collapse
There's a large discussion thread here in general section http://forum.xda-developers.com/zuk-z1/general/zuk-z1-rom-best-t3490053
For your issue you can try to clear cache in recovery or if that didn't helped a factory reset. Normally those behaviors are cause of cache issues after such a long usage time. I guess you're on stock Cyanogen OS 12.1 with locked bootloader,right?

strongst said:
There's a large discussion thread here in general section http://forum.xda-developers.com/zuk-z1/general/zuk-z1-rom-best-t3490053
For your issue you can try to clear cache in recovery or if that didn't helped a factory reset. Normally those behaviors are cause of cache issues after such a long usage time. I guess you're on stock Cyanogen OS 12.1 with locked bootloader,right?
Click to expand...
Click to collapse
Yeah i am using stock cyanogen OS 12.1.. I have tried factory reset as well. Thanks for the OS Thread.

ashish511 said:
Yeah i am using stock cyanogen OS 12.1.. I have tried factory reset as well. Thanks for the OS Thread.
Click to expand...
Click to collapse
Ok, then you did the best possible thing. The stock rom isn't good as you can read everywhere. Custom roms are better in nearly every case.

strongst said:
Ok, then you did the best possible thing. The stock rom isn't good as you can read everywhere. Custom roms are better in nearly every case.
Click to expand...
Click to collapse
Hi,
I did update it to CM13 as to install any ROM we needed it to be on CM13 at least. However i am unable to transfer files using USB. Thanks in Advance.

ashish511 said:
Hi,
I did update it to CM13 as to install any ROM we needed it to be on CM13 at least. However i am unable to transfer files using USB. Thanks in Advance.
Click to expand...
Click to collapse
Mount storage within TWRP

strongst said:
Mount storage within TWRP
Click to expand...
Click to collapse
Can you help me with the steps to do so...? And also with permissions issue... as i find this is related to it... Also the USb is getting disconnected again and again..

ashish511 said:
Can you help me with the steps to do so...? And also with permissions issue... as i find this is related to it... Also the USb is getting disconnected again and again..
Click to expand...
Click to collapse
TWRP >mount
Maybe you have A faulty usb port, cable, port at pc. Please check that first.
What permissions did you mean?

strongst said:
TWRP >mount
Maybe you have A faulty usb port, cable, port at pc. Please check that first.
What permissions did you mean?
Click to expand...
Click to collapse
permissions for read write...my USB cable is fine as i have connected in other device and its transferring uninterrupted. Also have checked alternative ports on my machine the issue is same.

Related

First official nightly version of CM14.1

CM14.1 nightly is available now for htc one m8 on CM official website
https://download.cyanogenmod.org/?device=m8
Does it mean that they are no longer working on CM13??
Which mean there is no snapshot version ??
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
i hope so ^^
Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
have you tried this cm14.1 nightly is it stable ?
Xhemal1325 said:
have you tried this cm14.1 nightly is it stable ?
Click to expand...
Click to collapse
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Saleen28 said:
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Click to expand...
Click to collapse
Is the same as unofficial, to be perfectly honest.
fizbanrapper said:
Is the same as unofficial, to be perfectly honest.
Click to expand...
Click to collapse
Nuh uh!!!
Its named OFFICIAL!
Previously it was written what doesn't work on the page.
Now nothing is enlisted.
So maybe it's stable.
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
skippydvd said:
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
Click to expand...
Click to collapse
Grab a log. It might help devs to fix this
Waza_Be said:
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Click to expand...
Click to collapse
Are you on GPE firmware? You can use terminal emulator and type:
Code:
su
df
This will tell you sizes of all partitions.
Ok, this was just an issue of CM recovery.
I installed TWRP and everything is fine
problems in cm14.1 htc m8
Hi guys I m having some problems
I have updated to cm 14.1 and it went to an bootloop. So i let battery drains completely then I after charging I wiped everything and then reboot. The phone rebooted and first thing I noticed is that there is no Google app. So i flashed gaps for 7.1 nano package which fixed this.
Now phone is working good though it's having some performance issues like slow keyboard (third party keyboards also), sometimes it heats and sometime it reboot by itself.
There is a major bug u have found
That I can't download messenger from play store it just keeps showing downloading but every other app is down loading fine. Then I went to browser to download some apks but I found that every downloading is failing due to unknown issues.
Then I installed Firefox chrome tried everything but no luck, but uc browser is showing that there is something wrong with SD card but there is no SD card, I have tried with SD card reboot reset everything still no luck. Then I connected it to my pc just to know that it's not even accepting anything from pc also.
It just keep showing copying moving but there is no progress. AND IT also not receiving anything from share it also. I can't even see my whatsapp contacts profiles pics they all are blank I can't download Nothing..
It's like my phone will download only through play Store and it will not accept anything from any other source like pc browser whatsapp hike messenger Facebook share it etc.
Theme store is also Missing.
But I am still able to use my phone as daily driver as it have no issues with sim card radio wifi Camera or anything else other than mentioned Above
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Xtenchen said:
.... comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Xtenchen said:
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
Here too! Omg you are the best ?
ckpv5 said:
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Click to expand...
Click to collapse
Can I ask you where did you go ? You was one of the best devs here. HTC 10 developing or ?
Moderator Information,
Thread has been closed as an official thread by an official maintainer has now been released.

Touchscreen Problems

Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
johannestheg said:
Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
Click to expand...
Click to collapse
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
strongst said:
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
Click to expand...
Click to collapse
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
johannestheg said:
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
Click to expand...
Click to collapse
I sent it back for warranty.
strongst said:
I sent it back for warranty.
Click to expand...
Click to collapse
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
johannestheg said:
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
Click to expand...
Click to collapse
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Narasimha12 said:
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Click to expand...
Click to collapse
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
johannestheg said:
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
Click to expand...
Click to collapse
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Narasimha12 said:
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Click to expand...
Click to collapse
No didn't ever have this problem before, so thanks for the good news, I'll update after testing
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
johannestheg said:
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
Click to expand...
Click to collapse
Bingo
Sent from my Zuk Z1 using XDA Labs
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
sethnet said:
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
Click to expand...
Click to collapse
Latest lineage OS doesn't have this problem. If you are still getting the touch screen issues, try NucleaRom
Sent from my Zuk Z1 using XDA Labs

Is it possible to install Cyanogenmod on a GT I9507?

Was just wondering if it was possible and if so, what version of Cyanogenmod would I need?
First off, there is no more CyanogenMod. The CyanogenMod people started a new project called Lineage.
Now to answer your question. Yes, it is possible.
The Optimized LineageOS ROM should work on your device.
Pwnycorn said:
First off, there is no more CyanogenMod. The CyanogenMod people started a new project called Lineage.
Now to answer your question. Yes, it is possible.
The Optimized LineageOS ROM should work on your device.
Click to expand...
Click to collapse
Ok, thanks.
Is it easy to install? (my first Android phone and my first time installing a custom rom)
razerphynx said:
Ok, thanks.
Is it easy to install? (my first Android phone and my first time installing a custom rom)
Click to expand...
Click to collapse
The install process is a subjective matter.
For me it's easy since I've been doing these things for over 4 years.
For you it might seem complicated at first.
There are various guides and video tutorials that will show you how to do it. The process is usually the same for every phone and for every ROM.
Pwnycorn said:
The install process is a subjective matter.
For me it's easy since I've been doing these things for over 4 years.
For you it might seem complicated at first.
There are various guides and video tutorials that will show you how to do it. The process is usually the same for every phone and for every ROM.
Click to expand...
Click to collapse
Fair enough, I guess I'll have to educate myself on the matter before attmepting to install anything.
I do have a couple more questions;
1. Does Lineage improve performance and battery life like Cyanogenmod claims to do?
2. I think Lineage is based on a newer OS (Android 7.x.x) then my phone natively supports (Android 5.0.1), would that be an issue?
razerphynx said:
1. Does Lineage improve performance and battery life like Cyanogenmod claims to do?
Click to expand...
Click to collapse
Yes and yes.
razerphynx said:
2. I think Lineage is based on a newer OS (Android 7.x.x) then my phone natively supports (Android 5.0.1), would that be an issue?
Click to expand...
Click to collapse
Yes, although the LineageOS guys, the XDA community and devs (who work on it for free, during their spare time) manage to port the last version of Android to this device, you can expect some bugs, a degraded camera quality (because of proprietary blobs Samsung do not publish), and to loose some functionalities (smart pause, smart scroll).
However, the stock Android experience is worth the switch and you will learn a lot of things here, which is invaluable.
Try the unofficial LineageOS by side (original development forum).
Ok, thanks for the answers
Last question, would you be able to send me a download link to it? I couldn't find the right one for my phone.
razerphynx said:
Ok, thanks for the answers
Last question, would you be able to send me a download link to it? I couldn't find the right one for my phone.
Click to expand...
Click to collapse
I already told you, you need the Optimized Lineage ROM. It has your device listed as "supported".
It's in the GT-I9505 Original Development section. Impossible to miss, it's always around the top of the list.
And it is universal, meaning that there is no special version for your device.
Do note that the developer himself has a GT-I9505, and so do most of his test team members. So there's no guarantee that it will be a flawless experience.
Sorry, I must've missed that. Will report back once I get it installed
Thanks for all the help
Edit: On the download page there's two different versions
"Optimized-LineageOS-14.1-20170120-jflte-AROMA.zip"
and
" Optimized-LineageOS-14.1-20170120-jflte.zip"
Which one do I download?
YAY, it's all set-up and working now. Thank you all very much
Whenever I lock my phone, the screen stops working. I then have to restart my phone to get the screen working again. Any solutions?
razerphynx said:
Whenever I lock my phone, the screen stops working. I then have to restart my phone to get the screen working again. Any solutions?
Click to expand...
Click to collapse
Use the stock kernel. On the download page there should be an "extras" folder.
If you can't find it then download the aroma version and flash it. This one gives you some options during the install process.
Thanks, that fixed the issue.
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
razerphynx said:
Thanks, that fixed the issue.
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
Click to expand...
Click to collapse
That I do not know.
Should work straight away normally.
Try enabling/disabling USB debugging while the phone is connected.
Tried that, still nothing
razerphynx said:
Got another question,
How do I make my phone show up on my PC? Like it shows up as "GT-I9507" but when I open it, it's just empty. Before on stock Android it had 2 main folders, something like "Internal" or "System" and "SDCard" and they both had multiple subfolders.
Click to expand...
Click to collapse
Select notification "USB charging this device" or anything similar, select MTP. It'll auto reconnect and it should work.
Sent from my Redmi 3 using XDA Labs
Oh, yeah. Try what he said.
I haven't connected my phone to a PC in years, so I wouldn't know what to do.

[Share] OFFICIAL Mokee 9.0 (android pie) nightly non treble for Zte Nubia Z11 nx531j

Until Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong(gladly)
Behold... official Mokee 10.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can experience it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is almost bug free and could be used as daily driver.
Clean install is suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps
7. Reboot and enjoy your Z11
Edit: Audio is fixed now, some users suggested that battery performance is slightyy better now.
Vi7eta said:
Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong.
Behold... official Mokee 9.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can feast upon it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is released Recently and its a nightly build still.. Other then Audio bug (fix will be found below) and broken IR (no fix yet) haven't found any issue in last 24 hours Rom is almost bug free and could be used as daily driver.
Clean install would be suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Audio Fix: https://androidfilehost.com/?fid=1395089523397917582
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps and lastly audio fix
7. Reboot and enjoy your Z11
Click to expand...
Click to collapse
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
fares70 said:
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
Click to expand...
Click to collapse
Go through this page, you will find everything you are looking for.
https://4pda.ru/forum/index.php?s=&showtopic=782022&view=findpost&p=60483845
Be cautious if you flash Mk90.1 2019318, an user got bootloop.
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
valorien said:
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
Click to expand...
Click to collapse
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Vi7eta said:
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Click to expand...
Click to collapse
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
valorien said:
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
Click to expand...
Click to collapse
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Vi7eta said:
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Click to expand...
Click to collapse
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
valorien said:
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
Click to expand...
Click to collapse
As i mentioned its in beta i too am using it as my secondary driver.
Though i havent faced random shut downs but i apreciate you tried the rom and reported the issues.
Please share exact steps you took while flashing mokee.
Thank you, I am using it now, very good rom
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
Good to hear that you having a great ride with mokee.
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Basically there is no restart now, it can be used daily, very good work.
SolidSnake140 said:
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Click to expand...
Click to collapse
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Vi7eta said:
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Click to expand...
Click to collapse
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
SolidSnake140 said:
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
Click to expand...
Click to collapse
twrp 3.0.2.0. dosent support pie.
battery performance?
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
how is the battery performance, compared to the official ROM?
Good rom no hanging but it's over heating in gaming and getting shut down when gaming under 40 battery
jdigra said:
how is the battery performance, compared to the official ROM?
Click to expand...
Click to collapse
Almost same. Although depends on usage.. You might want to try it for yourself to get exact results.

What's the most current and bug free Pixel C Rom?

Hi. What's the most current pixel C rom that doesn't have any bugs or other issues? Looking to move away from stock but last I checked some of the roms had some bugs still. Is that still the case?
Lineage 17.1 is pretty smooth, camera crashes after ~30mins of video but I mean that's a lot, reboot fixes that. Sometimes on boot you have to wait ~2mins before unlock pattern will work if you want to secure it. Other than that, butter
Sent from my Pixel 4 using Tapatalk
tabormeister said:
Lineage 17.1 is pretty smooth, camera crashes after ~30mins of video but I mean that's a lot, reboot fixes that. Sometimes on boot you have to wait ~2mins before unlock pattern will work if you want to secure it. Other than that, butter
Sent from my Pixel 4 using Tapatalk
Click to expand...
Click to collapse
Thanks. Looking into it. Not an easy thing to do for a semi-beginner. Will have to do more research on how to get it done. Want to be careful not to brick the device.
Sequoia1321 said:
Thanks. Looking into it. Not an easy thing to do for a semi-beginner. Will have to do more research on how to get it done. Want to be careful not to brick the device.
Click to expand...
Click to collapse
Eh, bricking a Google device is pretty hard. Easiest thing is unlock it (enable oem unlocking) then flash twrp from fastboot (need a Linux liveboot or mac system to do that) then flash the rom+gapps. twrp should let you mount usb storage but if not you can adb 'em over, there's install instructions for all of those things in the requisite threads
Sent from my Pixel 4 using Tapatalk
Sequoia1321 said:
Hi. What's the most current pixel C rom that doesn't have any bugs or other issues? Looking to move away from stock but last I checked some of the roms had some bugs still. Is that still the case?
Click to expand...
Click to collapse
LINEAGE 18.0 is here with Android 11! Check out @followmsi 's thread for Dragon.
Alxoom33 said:
LINEAGE 18.0 is here with Android 11! Check out @followmsi 's thread for Dragon.
Click to expand...
Click to collapse
Looks like it's not fully stable yet, if that's the right term. Says encryption not tested. I tried looking into installing Lineage 17.1 as tabormeister mentioned earlier in the thread, but couldn't find an easy how to guide. It's been a while since I've installed a custom rom. Do you know where I can get easier info about how to install it?
Sequoia1321 said:
Do you know where I can get easier info about how to install it?
Click to expand...
Click to collapse
Hey, what's rom currently installed on your device?

Categories

Resources