First official nightly version of CM14.1 - One (M8) General

CM14.1 nightly is available now for htc one m8 on CM official website
https://download.cyanogenmod.org/?device=m8
Does it mean that they are no longer working on CM13??
Which mean there is no snapshot version ??

Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.

Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
i hope so ^^

Saleen28 said:
Nightly changed to weekly afaik.
They probably are working on both with cm14.1 as a priority.
That's what I'm guessing.
Click to expand...
Click to collapse
have you tried this cm14.1 nightly is it stable ?

Xhemal1325 said:
have you tried this cm14.1 nightly is it stable ?
Click to expand...
Click to collapse
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.

Saleen28 said:
Nope, haven't tried it yet, I'll do it tomorrow.
Unofficial cm14.1 was more or less stable for people as they posted in it's thread, so I'm guessing official cm14.1 should be as good or better.
Click to expand...
Click to collapse
Is the same as unofficial, to be perfectly honest.

fizbanrapper said:
Is the same as unofficial, to be perfectly honest.
Click to expand...
Click to collapse
Nuh uh!!!
Its named OFFICIAL!

Previously it was written what doesn't work on the page.
Now nothing is enlisted.
So maybe it's stable.

I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...

Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!

skippydvd said:
Still the same like al the other 14.1 roms, Bluetooth carkit still disconnect after 2 seconds .
I can sent files to other people but when i connect to my carkit it connect and 2 seconds later disconnect. When i using 6.0.1 i have no trouble at all. Is there a fix?!
Click to expand...
Click to collapse
Grab a log. It might help devs to fix this

Waza_Be said:
I installed nightly from DEC 01, but I cannot even flash Gapps Pico as the system partition is too small.
I wiped everything I coulmd betweeen flash and nothing can be done right now...
Click to expand...
Click to collapse
Are you on GPE firmware? You can use terminal emulator and type:
Code:
su
df
This will tell you sizes of all partitions.

Ok, this was just an issue of CM recovery.
I installed TWRP and everything is fine

problems in cm14.1 htc m8
Hi guys I m having some problems
I have updated to cm 14.1 and it went to an bootloop. So i let battery drains completely then I after charging I wiped everything and then reboot. The phone rebooted and first thing I noticed is that there is no Google app. So i flashed gaps for 7.1 nano package which fixed this.
Now phone is working good though it's having some performance issues like slow keyboard (third party keyboards also), sometimes it heats and sometime it reboot by itself.
There is a major bug u have found
That I can't download messenger from play store it just keeps showing downloading but every other app is down loading fine. Then I went to browser to download some apks but I found that every downloading is failing due to unknown issues.
Then I installed Firefox chrome tried everything but no luck, but uc browser is showing that there is something wrong with SD card but there is no SD card, I have tried with SD card reboot reset everything still no luck. Then I connected it to my pc just to know that it's not even accepting anything from pc also.
It just keep showing copying moving but there is no progress. AND IT also not receiving anything from share it also. I can't even see my whatsapp contacts profiles pics they all are blank I can't download Nothing..
It's like my phone will download only through play Store and it will not accept anything from any other source like pc browser whatsapp hike messenger Facebook share it etc.
Theme store is also Missing.
But I am still able to use my phone as daily driver as it have no issues with sim card radio wifi Camera or anything else other than mentioned Above

i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it

Xtenchen said:
.... comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303

Xtenchen said:
i wouldnt say its here u cant even get out of the setup it just keeps crashing and resetting, i have no clue why its offical when the non offical ones did the same thing, crash 5 seconds it loads up, like comeon yall cud have atelast put a bit more work into it
Click to expand...
Click to collapse
Here too! Omg you are the best ?

ckpv5 said:
You are the one that should do more work on your device.
http://forum.xda-developers.com/showpost.php?p=69894809&postcount=303
Click to expand...
Click to collapse
Can I ask you where did you go ? You was one of the best devs here. HTC 10 developing or ?

Moderator Information,
Thread has been closed as an official thread by an official maintainer has now been released.

Related

CM13 for LG-G3, test builds out already

I was sleepily clicking around last night and came across cuzz1369's AFH dump, containing Cyanogenmod13 builds for our G3 variants. Im psyched things are actively being worked on.
Heres the link..
because everyone will want to ask; flashing this, I cant boot past the optimizing dalvik screen (tried on another phone), maybe its the gapps, Im not sure. Flashing back 12 any 5.1 rom (or nandroid backup) went without a hitch.
I am not really a hardcore developer, and I hope I am not breaking any rules by sharing this information. If This post doesnt belong here please let me know, or MOD take care of it then let me know. Im just a long time lurker, getting excited, I hope this is the right place for discussion
cuzz1369 thank-you
:highfive:
I't works decent, sound wifi, data worked. But i couldn't use facebook, so a whole lot of FC.
Here is a build from the official cyanogenmod maintainer for the LG G3 (d855). He says the most is working but the camera and the gaaps at this time does not work. So it is an experimental Version.
Trendlink (german):
http://www.android-hilfe.de/index.php?posts/9323705
Downloadlink:
http://d855.finnq.de/CyanogenMod/
There are already newer builds with working camera.
So far I think I tried most things in the last two hours, and all is working
Oh this is a great news. :good::good::good::good::good:
S.AMU said:
There are already newer builds with working camera.
So far I think I tried most things in the last two hours, and all is working
Click to expand...
Click to collapse
Can you get facebook to work?
I don't know. I don't use Facebook )
But for now I reverted back to android 5, because in cm13 there are still some fc of system ui and other graphical problems and I need an reliable phone for work.
But I think I will put it again in an month or so
Hi Guys,
How to active Doze feature?
Tks
dungquoc said:
Hi Guys,
How to active Doze feature?
Tks
Click to expand...
Click to collapse
Doze activate itself automatically. You don't and can't do anything about it.
Sent from my LG-D855 using Tapatalk
ceza1380 said:
Doze activate itself automatically. You don't and can't do anything about it.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Really?
And one question: Now on tab don't work on this unofficial CM ROM?
Tks
dungquoc said:
Really?
And one question: Now on tab don't work on this unofficial CM ROM?
Tks
Click to expand...
Click to collapse
Yes.
Most everything works on VS985 on the cuzz 11/9 build. Baseband is unknown, and you can't change the network type off of global, but data works fine. Messaging works but I didn't try to make a call to see if everything is good on that end. It's pretty good for a "test" build.
None of the varients are confirmed working for d851. Even his versions
Few devs commented on if on a thread I made

			
				
New batch of cm13 d851 boots!!!! no ls990 yet...
Did someone test this latest version already? I'm really curious...
Does the D851 even have a CM maintainer anymore? CM12 or 13?
Or do we just tag on to the D855?
Cuzz1369 said:
New batch of cm13 d851 boots!!!! no ls990 yet...
Click to expand...
Click to collapse
any changelogs with em sir? :angel:
There is a new LS990 build posted, downloading it now. Gonna give her a spin and see how it goes.
I got stuck at the Android is updating screen. It took about 5 minutes to get past the boot animation. I wiped Dalvic, cache, system and data. Then tried flashing the ROM only then 2 different sets of Gapps and still got stuck. Maybe I'll try again later when I have some more time.
Oh This CM13 build is work great with my D855.

Official Cm13 for HTC One M9[GSM] [himaul]

Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:
Super cool!!!!
Sent from my iPhone using Tapatalk
Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!
joekiddo said:
Installed it just now! First issue I've found is that the SD Card is not recognised. Also, remember to flash GApps for marshmallow!
Click to expand...
Click to collapse
yea the mounting method is different now ... it tries to recognize it as internal storage i think, but when it's not formatted for internal storage it will be just skipped...same Problem on many MM roms, not only for m9 and m8
Does SuperSU 2.56 work with cm13 on One m9?
vrxj81 said:
Does SuperSU 2.56 work with cm13 on One m9?
Click to expand...
Click to collapse
No need for this. Root is built in. You can enable it through the developer's menu
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I'm not with AT&T but I can make and receive calls, except that if I don't enter the area code when dialing, the phone app crashes. I can still call even if the app crashed. Other than that, so far so good.
Edit: There's a time bug also as blackroseMD1 said.
Seems like it has the time bug too, where the clock will fall behind by minutes or hours (or freeze completely) after the phone has been put down for a while. Unfortunately that's a killer bug since it messes with alarms.
dbarrett480 said:
is anyone able to receive calls while on AT&T LTE with this official version? It doesn't work on the unofficial cm13 or candy 6....
Click to expand...
Click to collapse
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.
Dheyl said:
I am on AT&T and I was having the same issue on another rom. I believe it is because the roms are based off of the international version of the phone. I've only seen VOLTE work on the AT&T stock rom. To fix this I just called customer care and had them de-provision my line for VOLTE.
Click to expand...
Click to collapse
Many of the custom Roms support VoLTE. Ice does for sure and I think LeeDroid and ViperOne do too.
Is just me, or the device rumble doesn't work?
WalterCool said:
Is just me, or the device rumble doesn't work?
Click to expand...
Click to collapse
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.
blackroseMD1 said:
Works fine for me here on the latest nightly. I dirty flashed over yesterday's nightly.
Click to expand...
Click to collapse
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic
Himalaya saxena said:
Good news for HTC One M9 (GSM) user it got first official Cyanogenmod 13 nightly rom based on android marshmallow 6.0 .
Who is ready to test it out. :fingers-crossed:
Source: http://www.gammerson.com/2015/12/download-official-cm13-for-htc-one-m9.html :good:
Click to expand...
Click to collapse
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Just wait for some stable built then it will be all fine.
excellent
installed it and its working very well except when i launch the camera and swipe to video mode it crashes. Also i have a magnetic car mount, when i mount the phone the display goes into Dot View and im not sure how to disable it
WalterCool said:
But, you had to do something extra? I can see now the vibration options with latest nightly, but still no vibration. Even more, each vibration is giving me a kernel panic
Click to expand...
Click to collapse
No, I didn't have to do anything extra. Vibration worked out of the box for me.
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Click to expand...
Click to collapse
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.
blackroseMD1 said:
No, I didn't have to do anything extra. Vibration worked out of the box for me.
Try going into Developer Options and then going to "Select USB Configuration". Usually changing that to Audio Device and then back to MTP makes the internal SD show up on my PC.
Click to expand...
Click to collapse
It works for me as well, thanks!
I have not tested CM13 yet... how does it look like? are there still a lot of missing things?

14.1 on afh

Has anyone else tried it?
I have no idea who built it.
For me no sound and no wifi.
I'm downloading it now.
Where did you download it from?
Sent from my ZTE A2017U using XDA-Developers mobile app
troy5890 said:
Where did you download it from?
Sent from my ZTE A2017U using XDA-Developers mobile app
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=529152257862691649
Thank you WesTD
Sent from my ZTE A2017U using XDA-Developers mobile app
No camera. Haven't tested much but it is stable after 12 hrs.
camera, WiFi and sound are not working.
Looks like this guy uploaded it.
It is definitely in alpha stage. I hope the dev keeps working on it.
Has anyone else tried BrokenOS from AFH?
I use it as my daily driver, only problem I have had is it will not switch back to network data from wifi without rebooting.
I am not linking to it because the devs dont like xda.
RUNNERX said:
It is definitely in alpha stage. I hope the dev keeps working on it.
Has anyone else tried BrokenOS from AFH?
I use it as my daily driver, only problem I have had is it will not switch back to network data from wifi without rebooting.
I am not linking to it because the devs dont like xda.
Click to expand...
Click to collapse
Hola
I knew that the Dysfunctional team had released a BrokenOS instance for the Axon 7, but I never used it because the builder / maintainer put the unsupported tag in the filename. Also given lack of updates I thought they weren't going to officially support the Axon 7. Have you any recent updates?
No update but it is very stable.
Are you guys able to rollback to zadmix or you 6.0.1 backup if you try this 14.1 ROM?
After wiping system and cache I reinstalled cm13 then restored my backup. Couldn't go straight from 14.1 to restore it would fail.
What Gapps are you guys using for this? Link?
RUNNERX said:
No update but it is very stable.
Click to expand...
Click to collapse
So thanks to your input, I jumped in and installed the BrokenOS ROM. WOW, I now regret not giving them a try much earlier. First AOSP based ROM that seems to work ok, the audio is not quite there yet but still very usable with V4A enabled.
I tried to reproduce the issue that occurs when Wifi is off by trying the Wifi off <-> Wifi on toggle numerous times and I am able to get cellular data back without issues. I did do a clean wipe of my existing stock ROM before attempting to install the BrokenOS ROM, immediately followed by Gapps install. Not sure if that sequence of installation helped. I also noticed that first boot takes a good 5 to 10 minutes to complete.
So for folks out there looking for a decent third party ROM with lots of customization, the "unsupported" instance of BrokenOS looks ok. I will still revert back to CM13.1 whenever Unjustified Dev and DrakenFx complete their work.
One item to note is that the existing release of BrokenOS only has up to the August 5 security patches.
QAM said:
So thanks to your input, I jumped in and installed the BrokenOS ROM. WOW, I now regret not giving them a try much earlier. First AOSP based ROM that seems to work ok, the audio is not quite there yet but still very usable with V4A enabled.
I tried to reproduce the issue that occurs when Wifi is off by trying the Wifi off <-> Wifi on toggle numerous times and I am able to get cellular data back without issues. I did do a clean wipe of my existing stock ROM before attempting to install the BrokenOS ROM, immediately followed by Gapps install. Not sure if that sequence of installation helped. I also noticed that first boot takes a good 5 to 10 minutes to complete.
So for folks out there looking for a decent third party ROM with lots of customization, the "unsupported" instance of BrokenOS looks ok. I will still revert back to CM13.1 whenever Unjustified Dev and DrakenFx complete their work.
One item to note is that the existing release of BrokenOS only has up to the August 5 security patches.
Click to expand...
Click to collapse
Sent u pm
QAM said:
So thanks to your input, I jumped in and installed the BrokenOS ROM. WOW, I now regret not giving them a try much earlier. First AOSP based ROM that seems to work ok, the audio is not quite there yet but still very usable with V4A enabled.
I tried to reproduce the issue that occurs when Wifi is off by trying the Wifi off <-> Wifi on toggle numerous times and I am able to get cellular data back without issues. I did do a clean wipe of my existing stock ROM before attempting to install the BrokenOS ROM, immediately followed by Gapps install. Not sure if that sequence of installation helped. I also noticed that first boot takes a good 5 to 10 minutes to complete.
So for folks out there looking for a decent third party ROM with lots of customization, the "unsupported" instance of BrokenOS looks ok. I will still revert back to CM13.1 whenever Unjustified Dev and DrakenFx complete their work.
One item to note is that the existing release of BrokenOS only has up to the August 5 security patches.
Click to expand...
Click to collapse
HI, do you know ifGPS is working on that ROM? On CM13 it doesn't seem to work or lock straight away so maps is quite laggy,
I need GPS so though I'd ask before flashing this custom ROM
borijess said:
What Gapps are you guys using for this? Link?
Click to expand...
Click to collapse
The origin of this version comes from Cyanogenmod forums. Look at this thread for more info on this alpha release, including GApps: https://forum.xda-developers.com/axon-7/how-to/available-zte-axon-7-lineage-14-1-t3530943
shia786 said:
HI, do you know ifGPS is working on that ROM? On CM13 it doesn't seem to work or lock straight away so maps is quite laggy,
I need GPS so though I'd ask before flashing this custom ROM
Click to expand...
Click to collapse
Are you asking about when it is on GPS only in settings?
I use high accuracy and don't have a problem.
QAM said:
So thanks to your input, I jumped in and installed the BrokenOS ROM. WOW, I now regret not giving them a try much earlier. First AOSP based ROM that seems to work ok, the audio is not quite there yet but still very usable with V4A enabled.
I tried to reproduce the issue that occurs when Wifi is off by trying the Wifi off <-> Wifi on toggle numerous times and I am able to get cellular data back without issues. I did do a clean wipe of my existing stock ROM before attempting to install the BrokenOS ROM, immediately followed by Gapps install. Not sure if that sequence of installation helped. I also noticed that first boot takes a good 5 to 10 minutes to complete.
So for folks out there looking for a decent third party ROM with lots of customization, the "unsupported" instance of BrokenOS looks ok. I will still revert back to CM13.1 whenever Unjustified Dev and DrakenFx complete their work.
One item to note is that the existing release of BrokenOS only has up to the August 5 security patches.
Click to expand...
Click to collapse
Where did you find the BrokenOS ROM for the Axon 7? Tried googling and going to their website but didn't find anything.

Our Device doesn't work with Android keystore?

I tried running the "bitwarden" app without success on omnirom, AICP and paranoid. I was able to get it to work once on AICP but then never able to recreate the scenario or know what was different. When I provided logcats to the developers they came back asking why our device doesn't work with the android keystore. Specifically:
01-23 23:01:06.816 11841 11841 E AndroidRuntime: android.runtime.JavaProxyThrowable: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.InvalidOperationException: The configuration is invalid. Creating the instance for type ISecureStorageService failed. Key not yet valid ---> SimpleInjector.ActivationException: Key not yet valid ---> Java.Security.InvalidKeyException: Key not yet valid
Namely
Java.Security.InvalidKeyException: Key not yet valid
This is the error. For some reason that device doesn't work with the Android Keystore. Any idea why?
I was going to say something about Chinese phones and not having good encryption due to the Chinese government's need to snoop on literally everything, but I don't think that's the case. Have you tried it on other ROMs, namely, stock/official LeEco ROMs? Or eUI? If bitwarden still doesn't work, you ought to contact a veteran dev like codeworkx.
sk8223 said:
I was going to say something about Chinese phones and not having good encryption due to the Chinese government's need to snoop on literally everything, but I don't think that's the case. Have you tried it on other ROMs, namely, stock/official LeEco ROMs? Or eUI? If bitwarden still doesn't work, you ought to contact a veteran dev like codeworkx.
Click to expand...
Click to collapse
In the bug report I opened at bitwarden a second user has reported the same issue with AICP 13.1. I personally tried AICP 12.1, Paranoid Android 7.3.1 and Omnirom 7.x. Oddly I did manage to get it working on AICP 12.1 one time but then was unable to identify what was different or recreate the situation. I did leave a PM for codeworkx identifying the issue since it appears to be a problem on both nougat and oreo. If it's an issue with any app that tries to use encryption in ANY form it could be a big problem. I don't see how that could be the case though since they have android pay working on some roms and it certainly uses encryption in it's processes (or at least I'd think it would).
Bitwarden bug report: https://github.com/bitwarden/mobile/issues/264
That app seems to be working for me, what exactly i should do to reproduce the crash?
voron00 said:
That app seems to be working for me, what exactly i should do to reproduce the crash?
Click to expand...
Click to collapse
Which ROM? Which version of Android? At least provide that information too...
sk8223 said:
Which ROM? Which version of Android? At least provide that information too...
Click to expand...
Click to collapse
Personal build of paranoid, 7.1.2. I don't think i've changed anything related to fscrypt/keystore.
voron00 said:
That app seems to be working for me, what exactly i should do to reproduce the crash?
Click to expand...
Click to collapse
I personally tested the app on Omnirom 7.x, AICP 7.x, and Paranoid Android 7.x.
A 2nd user in the bitwarden bug report stated it crashed for them as well under AICP 13.1 (Android 8.x).
https://github.com/bitwarden/mobile/issues/264
So if you have it working please state Rom, and kernel used .
*update*
Are you using the "stock" kernel in your personal build or one of the available ones like darkobas's or blackscreen?
famewolf said:
I personally tested the app on Omnirom 7.x, AICP 7.x, and Paranoid Android 7.x.
A 2nd user in the bitwarden bug report stated it crashed for them as well under AICP 13.1 (Android 8.x).
https://github.com/bitwarden/mobile/issues/264
So if you have it working please state Rom, and kernel used .
*update*
Are you using the "stock" kernel in your personal build or one of the available ones like darkobas's or blackscreen?
Click to expand...
Click to collapse
I have no idea if it works or not, i never used that app before, but i've created an account, adding passwords, cards, notes works fine, no crashes. Maybe you should clearify what exactly makes an app crash. Is it when you open the app? Or is it when you add something?
The rom is here, you can try and see if it works for you: https://forum.xda-developers.com/showpost.php?p=75333479&postcount=797
voron00 said:
I have no idea if it works or not, i never used that app before, but i've created an account, adding passwords, cards, notes works fine, no crashes. Maybe you should clearify what exactly makes an app crash. Is it when you open the app? Or is it when you add something?
The rom is here, you can try and see if it works for you: https://forum.xda-developers.com/showpost.php?p=75333479&postcount=797
Click to expand...
Click to collapse
I'll give it a try. For me and others the bitwarden app crashes immediately when you try to open it...you never get to actually use it for anything.
I'm currently on the "official" paranoid android 7.3.1 with it crashing like that so will try yours. Hopefully just a drop in replacement.
voron00 said:
I have no idea if it works or not, i never used that app before, but i've created an account, adding passwords, cards, notes works fine, no crashes. Maybe you should clearify what exactly makes an app crash. Is it when you open the app? Or is it when you add something?
The rom is here, you can try and see if it works for you: https://forum.xda-developers.com/showpost.php?p=75333479&postcount=797
Click to expand...
Click to collapse
I just flashed your rom, open gapps 20180123 mini and finally magisk 15.3...booted up and had it start restoring apps from backup...installed bitwarden as one of my first apps and tried to open it...it promptly closed....so tell me what you are doing different please.
famewolf said:
I just flashed your rom, open gapps 20180123 mini and finally magisk 15.3...booted up and had it start restoring apps from backup...installed bitwarden as one of my first apps and tried to open it...it promptly closed....so tell me what you are doing different please.
Click to expand...
Click to collapse
Magisk could be your problem or backups, maybe try without them first. I did nothing unusual really, just downloaded that app from play store and it works, but i don't have root.
voron00 said:
Magisk could be your problem or backups, maybe try without them first. I did nothing unusual really, just downloaded that app from play store and it works, but i don't have root.
Click to expand...
Click to collapse
Are you using open gapps as well? Are you using mini or another version? I'll try it without magisk and without any type of restore.
famewolf said:
Are you using open gapps as well? Are you using mini or another version? I'll try it without magisk and without any type of restore.
Click to expand...
Click to collapse
Im using opengapps stock but i dont think gapps is an issue, most likely root.
voron00 said:
Im using opengapps stock but i dont think gapps is an issue, most likely root.
Click to expand...
Click to collapse
I tried your rom and open gapps..no magisk...no data....did the bare minimum to get to the desktop and installed bitwarden via playstore. It crashed the same as always.
Will download opengapps stock and give it a try.
*deleted*
famewolf said:
I tried your rom and open gapps..no magisk...no data....did the bare minimum to get to the desktop and installed bitwarden via playstore. It crashed the same as always.
Will download opengapps stock and give it a try.
Click to expand...
Click to collapse
@voron00
Tried the unofficial version of paranoid + opengapps stock...nothing else.......connected to my google account...installed bitwarden via play store...it crashes.
Until I can find a 2nd person that says it works for them I have to consider you the lucky one
@voron00
After alot of testing it looks like a clean install of AICP 12.1 is the ONLY rom I personally could use that will let bitwarden work. Titanium Backup can be used to restore user apps and the data for those apps but that's it. Thanks for the information that it was possible to get it to work although I'm still unsure how you got it working on Paranoid Android unless perhaps you restored data from AICP 12.1 that had whatever bitwarden is looking for. Here's hoping android pay works on AICP 12.1. The low volume in calls on AICP is very bad or I'm going deaf..will work on that next.
I got works on AOKP 7.2.1 everything works on this great ROM.
Sent from my LEX727 using xda premium
mchlbenner said:
I got works on AOKP 7.2.1 everything works on this great ROM.
Click to expand...
Click to collapse
How is in call volume and speakerphone? So far the only ones that I found with good in call sound were pixel experience and omnirom.
famewolf said:
How is in call volume and speakerphone? So far the only ones that I found with good in call sound were pixel experience and omnirom.
Click to expand...
Click to collapse
In call is good.
Sent from my LEX727 using xda premium

[Share] OFFICIAL Mokee 9.0 (android pie) nightly non treble for Zte Nubia Z11 nx531j

Until Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong(gladly)
Behold... official Mokee 10.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can experience it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is almost bug free and could be used as daily driver.
Clean install is suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps
7. Reboot and enjoy your Z11
Edit: Audio is fixed now, some users suggested that battery performance is slightyy better now.
Vi7eta said:
Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong.
Behold... official Mokee 9.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can feast upon it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is released Recently and its a nightly build still.. Other then Audio bug (fix will be found below) and broken IR (no fix yet) haven't found any issue in last 24 hours Rom is almost bug free and could be used as daily driver.
Clean install would be suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Audio Fix: https://androidfilehost.com/?fid=1395089523397917582
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps and lastly audio fix
7. Reboot and enjoy your Z11
Click to expand...
Click to collapse
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
fares70 said:
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
Click to expand...
Click to collapse
Go through this page, you will find everything you are looking for.
https://4pda.ru/forum/index.php?s=&showtopic=782022&view=findpost&p=60483845
Be cautious if you flash Mk90.1 2019318, an user got bootloop.
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
valorien said:
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
Click to expand...
Click to collapse
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Vi7eta said:
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Click to expand...
Click to collapse
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
valorien said:
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
Click to expand...
Click to collapse
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Vi7eta said:
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Click to expand...
Click to collapse
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
valorien said:
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
Click to expand...
Click to collapse
As i mentioned its in beta i too am using it as my secondary driver.
Though i havent faced random shut downs but i apreciate you tried the rom and reported the issues.
Please share exact steps you took while flashing mokee.
Thank you, I am using it now, very good rom
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
Good to hear that you having a great ride with mokee.
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Basically there is no restart now, it can be used daily, very good work.
SolidSnake140 said:
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Click to expand...
Click to collapse
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Vi7eta said:
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Click to expand...
Click to collapse
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
SolidSnake140 said:
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
Click to expand...
Click to collapse
twrp 3.0.2.0. dosent support pie.
battery performance?
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
how is the battery performance, compared to the official ROM?
Good rom no hanging but it's over heating in gaming and getting shut down when gaming under 40 battery
jdigra said:
how is the battery performance, compared to the official ROM?
Click to expand...
Click to collapse
Almost same. Although depends on usage.. You might want to try it for yourself to get exact results.

Categories

Resources