Related
hard to believe, but I think I did it......
- I flash back to stock JMK in order to install a clean Overcome 1.4.1, and everything goes fine
- root with SuperOneClickv1.7-ShortFuse
- reboot the phone and apply the patch
- the normal message to reboot pops up on screen
- the Tab doesn't start anymore, it doesn't react even connecting the charger
- (I mention that battery was 80% when I started this operation)
- I did: keep pressing the Power button + vol down + vol up for 15 seconds, keep pressing the Power and touch the screen for 30 seconds
any advice to bring it alive again? thanks in advance !
Send it back to samsung, thats what i did when i briked it and 2th time when i spilled many diffrent luiquids on it. They will fix it in range of 12-18 days.
ovigt71 said:
hard to believe, but I think I did it......
- I flash back to stock JMK in order to install a clean Overcome 1.4.1, and everything goes fine
- root with SuperOneClickv1.7-ShortFuse
- reboot the phone and apply the patch
- the normal message to reboot pops up on screen
- the Tab doesn't start anymore, it doesn't react even connecting the charger
- (I mention that battery was 80% when I started this operation)
- I did: keep pressing the Power button + vol down + vol up for 15 seconds, keep pressing the Power and touch the screen for 30 seconds
any advice to bring it alive again? thanks in advance !
Click to expand...
Click to collapse
Please clarify... did you press power + vol-up and power + vol-down or power+vol-up+vol-down?
Flokey said:
Please clarify... did you press power + vol-up and power + vol-down or power+vol-up+vol-down?
Click to expand...
Click to collapse
ok...sorry....maybe I was to stressed:
1. I pressed the Power button + touch the screen for more than 30 seconds (with charger plug and without) = nothing happened, not even battery indication level...
2. I pressed Power button + Vol down = nothing
3. I pressed Power button + Vol UP = same result, nothing
4. I pressed Power Button + Vol UP + Vol Down = same result
5. I press Power button + Home = nothing
what other combination to try more?
BTW - I also opened the TAB and removed and the reconnected back the battery. I measured the power of the battery and seems to be OK = 3,7vDC
that sounds really bad... you probably have to send it to Samsung...
If no one else has an idea what to try :-/
3.7v seems that the battery is below 20%, try charging the batt to an external power supply, then do the steps that you previously mentioned. Good luck!
Sent from my GT-P1000 using XDA App
You might want to report this to chainfire and rotohammer. Still they sternly warned that playing with bootloaders is only sure way to brick the tab.
unfortunately I can't send any PM to @rotohammer! he does disable this obtion!
lucian777 said:
3.7v seems that the battery is below 20%, try charging the batt to an external power supply, then do the steps that you previously mentioned. Good luck!
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
lucian - the voltage of the battery is stock 3.7 vDC. is also written on the label....the voltage and amperes are two different things! capacity of the battery is 4000mAh.
BTW - before this problem I had removed the charger, and the battery level was 80%..... and also after happening this problem my TAB is connected to the charger.....
you mean, do I have to remove the battery and to try to charge with another power supply?
ovigt71 said:
lucian - the voltage of the battery is stock 3.7 vDC. is also written on the label....the voltage and amperes are two different things! capacity of the battery is 4000mAh.
BTW - before this problem I had removed the charger, and the battery level was 80%..... and also after happening this problem my TAB is connected to the charger.....
you mean, do I have to remove the battery and to try to charge with another power supply?
Click to expand...
Click to collapse
Yes try to charge the battery till it gets 3.8v...externally i meant, Disconnect the battery from the Tab, then connect the pins from the battery to a 5v power supply. I dont know if this can solve your issue .. but worth a try.
lucian777 said:
Yes try to charge the battery till it gets 3.8v...externally i meant, Disconnect the battery from the Tab, then connect the pins from the battery to a 5v power supply. I dont know if this can solve your issue .. but worth a try.
Click to expand...
Click to collapse
@lucian777 - unfortunately, I already done that. I have a adjustable power supply and I charged separately the battery.....but useless.... I'll send it to service until I don't make more damages.... anyway, thanks for replay !
hm....back again! Last night I received my Tab from Samsung service.... everything comes back to normal! strange thing is there is not any service report.... totally unprofessional job: the cover of screw are scratched...the frame of screen scratched too...really disappointed, but, the main thing is the Tab is alive again.....
would report the state back to sammy about this. its not proveable but atleast you get your say and you never know...
might be interesting thread to start.
rgds
Sent from my GT-I9000 using XDA App
Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
can someone help?
cosaki said:
Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
Click to expand...
Click to collapse
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
@fpriot said:
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
Click to expand...
Click to collapse
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Re: Defy Battery dead?!
cosaki said:
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Click to expand...
Click to collapse
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
@fpriot said:
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
Click to expand...
Click to collapse
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
cosaki said:
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
Click to expand...
Click to collapse
OK
Did you try to unbrick your phone with this thread ?
@fpriot said:
OK
Did you try to unbrick your phone with this thread ?
Click to expand...
Click to collapse
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
cosaki said:
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
Click to expand...
Click to collapse
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
@fpriot said:
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
Click to expand...
Click to collapse
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
cosaki said:
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
Click to expand...
Click to collapse
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
@fpriot said:
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
Click to expand...
Click to collapse
Thank you for your attention. I hope someone can help me!
thks a lot
anyone who can help me?
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Plug your phone on charge but not in usb, and wait about 20mn
I am having this problem as well right now, how did you fix it?
I too have the same problem , it was off because drain , but then put in office is no longer lights . the light is always red . what can I do?
Leave it charging for a while from the mains. Red light means charging on low charge, the screen doesn't turn on until it has some charge.
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
rugabella said:
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
Click to expand...
Click to collapse
Have you tried holding down the power button now?
Johndawolf said:
Have you tried holding down the power button now?
Click to expand...
Click to collapse
yes , and unfortunately nothing happens . problems that can have ? He does not get the charge? because it comes on the same spy and it is always red ? the phone has just three months
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Im dealing with the same problem from morning. Im going to try your solution by 10 minutes.
ijaz1976 said:
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Click to expand...
Click to collapse
I am no expert, but I've had the same problem after fully running the phone battery down. While looking for an answer I managed resolve the issue by to hold the power down and down array while the phone in chagrining for around 2 minutes and the phone started up, almost by complete accident.
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
tiosus said:
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
Click to expand...
Click to collapse
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
tiosus said:
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
Click to expand...
Click to collapse
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Hello to all
I again have the same problem, the battery of my storm has fully discharged, but although is it charging for many hours the LED light is always red and the phone will not turn on. This time even while holding together power button and volume less nothing is happening.
Can anyone help me and tell me how I can fix ?
Level1imp how did you open the phone to disconnect the battery ?
level1imp said:
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Click to expand...
Click to collapse
How i did you open up the phone? I'm struggeling with it
Thank you soooo much!!!!
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
After I read your message here, I've tried and finally I solved this problem in my phone.
I was getting crazy because there isn't place to fix this phone in my country and the company Wileyfox wanted me to send my phone to someone in europe to them send to Wilefox to fix it. I've spoke with the company today to see what could they do for me and the solution they gave to me was this and to I try to open the back by myself. But this last solution it isn't a solution because would make me loose the garantee. Why the technician didn't told me about this solution? I'm so disappointed with them.
hi i have a wileyfox storm it is not going on when i press power button .now i connect with wall charger so it show a red circle on the bottom and phone show logo on and of .how can i put it on
This works!!
For anyone who needs it, this also works on wileyfox swift 2
Had this too, but solved
Just had this problem occur on my Wileyfox Swift 2 Plus. Completely drained, left on charge for 4h but it got 0% charged in that time.
For me, hooking it up to a slightly stronger power source (5V 2.1A) USB port of my power bank,
in combination with Power + Volume UP
Got me to a boot screen I'd never seen before.
Hit Fast Boot, it looked like it just turned off again but a few seconds later I saw the normal boot screen pop up
i'm stuck with black screen, blue led... and no buttons responding. inserting charging cable does nada.
Force reboot (Volume down+Power) does not working.
Can I save it?
Does color of led change when you're plugging the charger? I would recommend you different combinations volup + home + power/ voldown + home + power. If it won't help, wait till the phone runs out of battery and then plug the charger
Sent from my SM-G935F using Tapatalk
dollar7 said:
Does color of led change when you're plugging the charger? I would recommend you different combinations volup + home + power/ voldown + home + power. If it won't help, wait till the phone runs out of battery and then plug the charger
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Nope,the led color does not change when I'm plugging the charger. I try different combinations but nothing.
dollar7 said:
Does color of led change when you're plugging the charger? I would recommend you different combinations volup + home + power/ voldown + home + power. If it won't help, wait till the phone runs out of battery and then plug the charger
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I wait till the phone runs out of battery after I got into recovery and I reset the phone and now the phone works,ty !
Hi,
I have the same problem just updated to new software update (nouget 7) and the phone restarted couple of times and now the screen is dead and the blue light is blinking... when i plug it for charging nothing happens and the blue light is blinking. tried all the methods to power off/ safe mode/ recovery mod nothing is working.
any advise????
thanks
Ali
If your phone have under warranty please go to service center to get proper solution. If you trying to reset yourself it can be harm your mobile so don't take is lightly.
hi I have the same problem haiz...how long did i need to wait for the battery run out if the time my phone dead is about 90% of battery.s7edge...sorry to my bad language...haizz.........
same problem...
Its happening with me about 1month. i dont know what to do i have to wait 3-10 hours to battery go to 0% and back to use cellphone
NarcoticAMD said:
I wait till the phone runs out of battery after I got into recovery and I reset the phone and now the phone works,ty !
Click to expand...
Click to collapse
I've been waiting for like more than 24 hours till no sign of led , then I plug charger but nothing happen when I try combo keys.
Hopefully any solution since I bought this phone by online ( international version ) with no warranty.
my phone was working fine (Verizon) after the nougat update and tonight when i plugged it in to charge i also restarted the phone and it never booted into android, It's stuck on the verizon logo boot screen with the blue light on. I tried turning the phone off, wiping cache, safe mode, etc... nothing seems to be working.
Any thoughts? i don't want to lose my data...
Hey All,
I have bought a used leeco pro 3 off swappa. Unfortunately I didn't get the phone until much later after delivery (had to have someone bring it to me). In photos the phone works fine, but when I got it it won't turn on and there's no indicator that it's charging at all. When I do plug it in, the phone does get warm though.
Any thoughts what the problem could be?
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
sk8223 said:
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
Click to expand...
Click to collapse
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
phillytemptation said:
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
Click to expand...
Click to collapse
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
hearnfar said:
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
Click to expand...
Click to collapse
Tried both, still nothing.
phillytemptation said:
Tried both, still nothing.
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Moon75 said:
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
mchlbenner said:
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
When you plug it does it show it charging.
You must push power and volume button at the same time.
Never buy from them.
Sent from my LEX727 using xda premium
phillytemptation said:
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
Click to expand...
Click to collapse
Try use different cable connect phone to computer. For the phone show as Qualcoom HS loader on pc, I just can remember did not format it or anything like that and the phone was fine working again.
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
same problem,dead
i have the same problem i just press the power button with level down(-) audio more than 2 minutes and it boot up. try to press it more than two minutes
rudolph323 said:
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
Click to expand...
Click to collapse
Did you get this working?
mchlbenner said:
Did you get this working?
Click to expand...
Click to collapse
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
rudolph323 said:
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
Click to expand...
Click to collapse
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
rudolph323 said:
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
Click to expand...
Click to collapse
Try holding volume up see if you have fastboot.
Sent from my LEX727 using xda premium
Any help?
Hello, I have very similar problem. My Leeco le pro 3 don't charge I try diffrend cables and chargers but when plug-in only orange diode start to blink. Do you have any other ideas what to try?
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
nocturnoz said:
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
Click to expand...
Click to collapse
Mine is installed the same rom, and today It had the same problem.
mmcarvaxd said:
Mine is installed the same rom, and today It had the same problem.
Click to expand...
Click to collapse
Problem is "solved". I was able to boot inti TWRP and charged from zero to 10%. After that after few trys it was possible to boot into the ROM to charge the battery to 100%.