Hi. My device is ****ed very bad. When I plug in into pc it makes sound that something has been plugged in, and it says device "Android", downloaded stock rom, installed qpst, usb drivers, everything (I hope) and made some progress "kinda". Something abot qualcomm device com 9 device is recognized in qrfil, but when I click download it gives me some error( I will let some photos)
I have to mention that I cannot boot in anything, not even recovery, at least it "connects" to computer
PLEASE HELP ME! I will be very thankful for any try to help
Thanks!
P.S. I let some photos, look at them, maybe they help
Related
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Steps Parku said:
Hi Guys,
Please I am in some serious mess and I need help. i messed up with my bootloader and now my phone seems dead. now here's what happens, the phone is completely dead and does not power on. any time i connect it to pc, it shows under device manager as USB Input device. under the tap 'HUMAN INTERFACE DEVICE (HID) the red light stays on for some time then it goes off. Actually i have all the necessary flash firmwares to kick it back to life, but the issue i am having is, my phone is not being detected by my pc. i installed Gionee drivers from the official webpage but still it won't detect my phone. it always sees my phone as 'USB INPUT DEVICE' i was told it needs to be detected under com port before my flashing sotware can recognize it.
please Help
Click to expand...
Click to collapse
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Still Not Helpful.
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Steps Parku said:
Thanks for the support, but actually i have already visited the link. right now, the issue is, my device detects as a USB HID DEVICE, instead of the qualcom. i have downloaded all the necessary drivers but still. And the above link said he has no idea how to deal with that.
Click to expand...
Click to collapse
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Still Not Helpful.
andresplata94 said:
Try repair ur dirvers, next plug ur device with GNQ , bp browser open the file ( firmware ) an chose bp_imagen next try ap+bp emergency is anyway is not working change this option for general dowload ap+bp
try it
Click to expand...
Click to collapse
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Same Problem...
Steve, did you solve the problem? If yes, how did you solve it?
I have the same problem with my Blu Life Pure XL, which is a similar phone.
Regards,
Ricardo
Steps Parku said:
Hi, Thanks for the help but i did that several times, i even formatted my pc re-installed windows, re-installed the gionee drivers and over and over again, i even tried doing this from windows xp, 32bit, 64 bit, windows vista, windows 7, windows 8. and in all of this above mentioned os, anytime i connect my phone, it displays under Human Interface Devices as USB INPUT DEVICE, with the red light flashing. in this mode, GNQ downloader never gets to recognize my phone. Please any help?
:crying:
Click to expand...
Click to collapse
freak_on said:
Follow this.. U shud b alrite..
http://forum.xda-developers.com/showthread.php?t=2735079
Click to expand...
Click to collapse
hey.
I have this problem with my e7 ,
could you fix it , please ?
I have the same problem with zte nubia z7max, so its qualcomm issue that has rarely been talked about and I couldn't find any solution to it at all too.
if find one,let me know plzzzz.
thnx
Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:
Steps Parku said:
Hi Everyone, In an attempt to fix my bricked device with all necessary flash files and drivers installed perfectly, my device is being detected under 'HUMAN INTERFACE DEVICE' as a 'USB INPUT DEVICE' in device manager, according to what i read, my device is suppose to display or be detected as "qulacom HS-USB qloader 9008" under com port. but that isn't happening, i repaired the drivers, re-installed them, formatted my pc and tried it on fresh windows installation. but still the problem is there. i even tried it on several computers but it still detects as USB INPUT DEVICE under Human Interface Devices in device manager. Now i am stuck here with my device dead for the past two weeks. please any one with an idea how to fix this issue?
i will be deeply grateful. Thanks!!
:crying:
Click to expand...
Click to collapse
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck
Still Not Helpful.
andresplata94 said:
follow this
1. join in recovery mode (cwm)
2. go mounts and stroge and format system
3 reboot ur device ( Now the loop is eliminated, just a static imagen )
3. dowload drives, firmware , and QNCG
4. install drivers or repair it
5 when the step 4 is done, plug ur device on elife logo and wait for driver installation(like 10 min)
6 use winrar for descompress the firmware
7open GNQC select bp browser, and search in folder firmware a file called BP_imagen
8 try with genereal mode or emergency mode, and click dowload
i did it, its working
u must have patience dont worry
try it, its working
good luck
Click to expand...
Click to collapse
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks
did u fix it??
U can fix ? I have the same problem since three weeks and nothing... this a a sh*t... only recognized by HID... In other ocassion before of this, i can flash my Gionee but now i cant:crying:
Another one here who saw how the phone bricked after being flashed with GnQc, now when I plug the Usb on the Pc or with wall charger, the red light keep lit and it seems like it will like this forever. I am thinking of trying to get out the screen and disconnect the battery, seems like the phone is stuck on some strange mode.
Thanks.
This feel that not have solution....
Can any one fix it ?
i also got stuck . have given to gionee care they are unable to figure what was the actuall problem
Steps Parku said:
Actually my device doesn't even come on for me to do all that you said, i tried repairing drivers and all that but it still detects as USB INPUT DEVICE under HUMAN INTERFACE DEVICES. i need my device to detect as qualcomm device before GNQC downloader can detect it. my issue is very different here. because GNQC can't see my device since my device is not being detected the rightful way after all. i will deeply appreciate the solution. Thanks
Click to expand...
Click to collapse
the problem for me is that it have recovery stock english(e3) and i can't do anything...
anyone fixed the problem? i have my gionee bricked....
Hello,
i was trying to update my phone (G2 D800) to the last snapshot from cyanogenmod, I wiped it, then i connect my otg to install the .zip but it didn't recognize it, weird, then I try to connect it directly to my pc to transfer the files, my pc says "Unknown USB Device (Device Descriptor Request Failed)"
i can access all my files in the phone, nothing from outside, not even adb.
Then i tried with Download Mode, same thing.
tried the unbricking guide where i had to short two capacitors, same again.
Now I'm downloading Ubuntu and then try the other one.
I wanted to ask if anyone knows something about this or is just that my phone died?
Thanks In advance
r2v2tanachian said:
Hello,
i was trying to update my phone (G2 D800) to the last snapshot from cyanogenmod, I wiped it, then i connect my otg to install the .zip but it didn't recognize it, weird, then I try to connect it directly to my pc to transfer the files, my pc says "Unknown USB Device (Device Descriptor Request Failed)"
i can access all my files in the phone, nothing from outside, not even adb.
Then i tried with Download Mode, same thing.
tried the unbricking guide where i had to short two capacitors, same again.
Now I'm downloading Ubuntu and then try the other one.
I wanted to ask if anyone knows something about this or is just that my phone died?
Thanks In advance
Click to expand...
Click to collapse
If you can access download then use this guide.
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
looks like its the charging port or board where it is attached, last night I managed to connect to to the pc but didn't make it to actually copy the files
r2v2tanachian said:
looks like its the charging port or board where it is attached, last night I managed to connect to to the pc but didn't make it to actually copy the files
Click to expand...
Click to collapse
you got a faulty micro usb charging port on phone.. maybe
Hello
Please forgive me my English, it;s not my everyday language. I hope I will write everything clear, if not please tell me.
I had already read many tutorials, topics in some similiar situation but I cannot find any working for me information.
I have bought Nexus with crashed system. I could only get into recovery or bootloader, but system cannot start (it stops on google logo). It has got TWRP bootloader. I tried to mount/install there some another kind of bootloader (newer) by the flashtool and then try to start the system but it wont work. After that I just thought about connect an USB-OTG adapter and try to install system from it. Turned off the tablet and just go to shop for OTG-adapter. When I came back with new cable my tablet won;t start anymore.
What I have already tried:
- charging for more then 20 hours (charger 2.1A, 5V)
- unplug baterry for about 10 minutes
Both of this solutions wont work for me. Everytime I try to turn it on I'm pushing buttons "Power" and "vol+" or "vol-". Both or not both, or only "power"- Nothing.
When I connect it to PC I'm getting an notification "Unknown USB device", and it is not visible by abd or fastboot. Is it normal? It has some kind of... live in itself.
Please tell me some suggestions what can I do more, or something.
Thank You in advance.
Answer
Well,if it reconize by the PC and you can see the file in it, you can use it as a USB (That's a good option because mobile device always has faster transfer speed)
And sorry w/my vocabulary mistake .I am from Viet Nam
I've just reinstalled Windows 10 and have a problem getting my phone to be recognized.
I tried downloading the files from this thread which didn't help and resulted in my pc displaying a Test mode at the bottom right (I believe this is for un-signed drivers, prob the qualcomm one)?
Anyone able to help, wanted to unlock and flash a rom this eve but thats not going to happen now
Got this sorted, please close thread