NXT china b587 update - Mate 8 General

In the firmware finder it shows now b587. It also says in the chinese forums that this is a fake release to fool with hackers similar to b586 that came out 3 months ago. Has anyone tried to install b577? I have via firmware folder and it fails anyways.:crying:

The security patch after I got it booted is from december 1st 2016. Fake !! Do not bother .

afaik, the most current non-fake chinese firmware is B584
Sent from my HUAWEI NXT-AL10 using Tapatalk

What hackers? Are we the hackers now?
Any theories what would be the point of that?

Whats the last version chaina version has stoped until now

B577 is the final launched
Print of my mate8

HUAWEI Mate 8 EMUI5.0 B584
HUAWEI Mate 8 EMUI5.0 B584 version has been released!
Date: 2017/3/30
Mate 8 full Netcom NXT-AL10
Mate 8 Telecom version of NXT-CL00
Mate 8 Mobile NXT-TL00
Mate 8 Unicom version of NXT-DL00
Second, the updated version
B577-B584
[optimization]
optimization Baidu input method performance, make text input more smoothly
optimization hide the navigation bar interface after sensitivity
fit into the Google security patches operation, improve system security
[repair]
Reparative unlock screen lock screen wallpaper display problems abnormal
repair custom wallpaper automatically restored under the default wallpaper problem
repair micro letter was clean off the recent task Manager problems
repair holster mode window brightness is very dark question
repair alarm bell does not ring or questions
Third, the upgrade remind
(1) Make sure the phone is not ROOT, can be smoothly upgraded to version B584 through online upgrade OTA way after you get the push.
(2) taken in batches push version, in order to meet enthusiastic pollen to quickly upgrade needs, you can use the 'Member Services -> Services -> Upgrade Application' to download version upgrade (see steps and frequently asked questions: http: / /club.huawei.com/thread-6794924-1-1.html). Member Services will be open on March 30 B577 - B584 of the upgrade link.
(3) The upgrade does not clear user data, but it would be best to back up all important data to the SD card, PC or the cloud before the upgrade, and make sure to back up a complete and effective. After the
(4) the update is complete the system will restart, please wait about five minutes.
Fourth, the problem requires feedback
When you find other problems in the experience, please feedback by:
1) If your club has a Beta version of the phone, you can use the Beta Club for feedback.
2) If your phone is no version Beta Club, please feedback in this thread posted questions, feedback following format:
[time] problem Problem Description]
[please describe under specific phenomena such as
[phenomenon] Screenshot feedback power consumption has the following screenshot: 1) set - Screenshot battery; 2) power management, - recording power hungry applications theme; if other problems, may be screenshot feedback.
Steps [steps] to reproduce the problem occurred and the results of [
] will now issue the probability of occurrence / test several times, several third-party version number]
[appear if you use a third-party application, please indicate the condition
[Recovery] such as: after a hard reset function returned to normal
[before contrast version] historical version is also the problem, please provide the version number
[mobile phone IMEI / MEID number] (query methods: dial interface input * 06)
[your contact information ] cell phone or QQ number
setting the quote is only visible to authors, so other people can not see your contact information, you can safely leave your contact information so that we can follow-up visit, thank cooperation!
Click to expand...
Click to collapse
There is also a KangVIP: [Firmware the REC] Huawei Mate8 B584 ROM game mode set multiple custom DPI adjustment function HRT_Kangvip N

A fast way to do update to b584 is to use hrt version and then e -recovery and it installs b584

I have China version is up to date to b577 .. Just to ask you version b577 last stock version or there is anther . i keep check the update no version I get it ...

Afaik, the latest official China version for mate 8 is B577.
B584 is an alpha or beta version which is with log for developers.

Yes thanks , I already opened this thread to inform everyone . good work updating us all.

Hope any one of devloper can assist him self to ask us what missing ?

Guys any download link plz?

The newest b587 is now a true version , and works use firmware finder and it will validate the update there is 4 versions so try till u get the proper one

c|nder said:
The newest b587 is now a true version , and works use firmware finder and it will validate the update there is 4 versions so try till u get the proper one
Click to expand...
Click to collapse
Hii c|nder plz can u provide a mega link for stock al10 v587 and kang 587v2 ? )

Hey dude , unfortunately i don't have that version I have a rebranded dl0017 , I didn't go with version 2 thou because I added my kalifornia kenny sound mod to it and v2 only difference is viper4android.

stock rom for NXT-DL00C17B587 MATE 8
https://www.youtube.com/edit?o=U&video_id=CG_rldEIxns

Related

Downgrade Package Honor 6 Plus lollipop to kitkat

Latest Update honor 6 plus downgrade package:
I succesfully managed to downgrade lollipop 5.1 to kitkat 4.4 using this downgrade package .
i can confirm that european b324 can be downgraded to b142 eu version
notes : after downgrade to b300, i update b142 using sdcard but at 30% installation it says installation failed...but the phone reboot again in kitkat 4.4... im missing double tap to wake up function ....and
so what i do is i insert b132 in my sdcard and just update it...it managed to update again until 100% and all the function are working again
im using honor 6 plus lollipop currently running on b324 version ...after all the handphone working fine ...but im always try to going back to kitkat since my sound button not working after lollipop update....
so after a while and try. recently i found this package for downgrade official lollipop to kitkat. you can download here
downgrade package EU lollipop to kitkat honor 6 plus
let us try this and give feedback if its working
i try this downgrade before and its not working for me..so lets hope this new one can help you and me
afikri6 said:
im using honor 6 plus lollipop currently running on b324 version ...after all the handphone working fine ...but im always try to going back to kitkat since my sound button not working after lollipop update....
so after a while and try. recently i found this package for downgrade official lollipop to kitkat. you can download here
downgrade package EU lollipop to kitkat honor 6 plus
let us try this and give feedback if its working
i try this downgrade before and its not working for me..so lets hope this new one can help you and me
Click to expand...
Click to collapse
It worked for me ..
I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file. Although it is mentioned in the 2nd step that the version should change to the transition package "PE-TL10C900B300" .. Well mine didn't !!
But then too i went ahead to the 3rd step nd it worked for me .. Im on Kitkat now ..
P.S : After updating to kitkat from the transition package during the first boot i got an error saying user partition unusable .. I had to factory reset it / Erase it .. I dont know what that meant please lemme know what that is (My SD Card was my default storage location).. But never the less kitkat is working fine .. I just now reinstalled kitkat via Recovery mode and m gonna root it now
PSS: I never backup since i only have movies n Tv shows in my SD Card ..
Cheers
How i reinstall kitkat from recovery.please provide steps
Thanks for your work
Downgrade Package Chinese Honor 6 Plus lollipop to kitkat
I am tryed Honor 6+ PE-TL10 Lollipop CN B351 EMUI3.1_ Android5.10.16. I happened more problems and issues:
- could not use talking clock aplications like Caynax Hourly Chime PRO, AutomateIt and AutoMagic (could not use speech rules with speaking clock in this apps);
- could not use apps that automatically activate phone speaker at the beginning of the incoming and outgoing call. I tryed AutomateIt and AutoMagic rules that activate speakerphone automatically, but it is run only to outgoing call;
- could not use applications like Missed Call Reminder (not call an SMS sound reminder and vibration).
Some applications that start after the phone starts up, certainly not start, even if I enabled these app settings on phone menu in settings - startup manager. Some applications with status bar notification and sound notification not run and not make notification, even I activated options with allow notifications on settings - notification center. I allowed all of apps to keep running after the screen is turned off, but in vain.
I could not downgrade to B260 KitKat until I found an special firmware B300 needed to downgrade Huawei Honor 6 Plus from Lollipop 5 to Kitkat 4 Android. I found this firmware very, very hard... I found only after I wrote Google search in Chinese language. Only a downgrade version from China was OK. A downgrade version from EU countries not run. I installed PE-TL10C900B324 EU 5.1.1 firmware version, then I tryed to install downgrade version from EU countries, but not run.
On an Europe and other countries Honor 6+ PE-TL10 firmware it is impossible to switch 3G/4G from SIM 1 to SIM 2. This setting is missing from the SIM card management phone menu.
You can download this downgrade firmware from here: http://www.4shared.com/zip/Uk1rNF9Hce/Honor_6_Plus_PE-TL10_downgrade.html
Lolipop to Kitkat - Rollback from 3.1 emui to 3.0 emui
Trespasser137 said:
It worked for me ..
I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file. Although it is mentioned in the 2nd step that the version should change to the transition package "PE-TL10C900B300" .. Well mine didn't !!
But then too i went ahead to the 3rd step nd it worked for me .. Im on Kitkat now ..
P.S : After updating to kitkat from the transition package during the first boot i got an error saying user partition unusable .. I had to factory reset it / Erase it .. I dont know what that meant please lemme know what that is (My SD Card was my default storage location).. But never the less kitkat is working fine .. I just now reinstalled kitkat via Recovery mode and m gonna root it now
It worked for me too, I was on the Indian variant for Honor 6+ Lollipop ..
All i did was follow the instructions in the rollback .doc file.
many thanks .. i was too upset with lolipop .. its u very headache for me..
Click to expand...
Click to collapse
Can i downgrade from android m to kitkat ?
why would you want to downgrade your phones?
ergo14 said:
why would you want to downgrade your phones?
Click to expand...
Click to collapse
I need root
there is no root at android m !
@LI™ said:
I need root
there is no root at android m !
Click to expand...
Click to collapse
there is. try multitool
shubham412302 said:
there is. try multitool
Click to expand...
Click to collapse
Cant get my code to unluck bootloader !
sb help me to get this pleaaaase !
Nice post, a dummy question though, would the this European EMUI 3.0 package, which has the PE_TL10 model number in the file name, work well on my WCDMA-focused PE-UL00 model? did a search around on the web without much luck... wanting to try regardless but fearful bricking my phone...
Thanks.

Found Marshmellow Update Link for Honor 7

Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Found Marshmellow Update Link for Honor 7
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Can you make a banana milkshake with strawberries? You can't. Same with installing the European build Android on Indian, Chinese etc.
Wysłane z mojego PLK-L01 przy użyciu Tapatalka
ashahriar said:
Hi,
I have purchased this phone but sadly its Model Number PLK-UL00 not PLK-L01. I have upgraded to the latest build EMUI4.0_PLK-UL00_6.3.1 which is Android Version 6.0.
My question is - can I upgrade to EU version of the firmware PLK-L01 B320 or less. All I want is to get rid of all the chinese apps and replace them with pure google + english ones. Please help
Click to expand...
Click to collapse
Unlock bootloader
Root
Install Titanium Backup
Install the desired apps
Freeze the unwanted apps
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Hi - Indian firmware version starts with PLK-UL00IN. My mobile firmware version is PLK-UL00. Shouldn't I be able to upgrade to the India firmware.
My apologies to the admin in advance as I have posted similar question in a different thread. But this thread is more suitable to the topic. I am a novice when it comes to firmware.
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
rspn69 said:
First of all, thanks for posting the link and secondly you can very well update you mobile as I have already done that with your link
Click to expand...
Click to collapse
Dude were you on B160 prior to updating to B330?
ahmedzj said:
I tried updating , it failed.. the software update guidelines.pdf which was part of the update states "software version control problems, you should firstly upgrade a transfer package provided by R&D." wher do i get that ?
Click to expand...
Click to collapse
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
shiva.kakkar11 said:
Hi I updated it with the link provided. Did the archive download properly? Since it's an internal document, I don't think the package is available in public domain. You can check for the rollback package which is given in one of the threads. It might work. Or use the honor multi tool.
Btw, this update is 2 steps forward and one step back. Some good features like visitor mode have been removed. Call recording has become problematic. Previously, I could record easily using boldbeast call recorder. Settings are much more difficult to find. On the positive side, battery backup has jumped tremendously. Plugged out at 9.40 am today. My phone is still at 75 percent at 6.30 pm with moderate use. There is no doze mode setting but I think they have incorporated some features as I can see that phone goes into sleep when screen is off much more frequently. Also, the awesome themes that lollipop had are no more there. Not even the live wallpapers. Mixed feelings about the update overall.
Click to expand...
Click to collapse
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
ahmedzj said:
Hi,
Could you please share the checksum of the UPDATE.APP file ? Not sure whether the download was corrupted
Also were you were on B160 before the update ?
I updated the using the Settings-> updater-> Local Update -->Select the update. Did you do the same ?
The Update failed and rebooted ,so i dint brick the phone for now
Click to expand...
Click to collapse
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
ahmedzj said:
Dude were you on B160 prior to updating to B330?
Click to expand...
Click to collapse
I have updated from B 160 to B 304
shiva.kakkar11 said:
MD5 checksum is F697BB78C8E8202DC78716C8647E8706.
Yeah I was on 160 and did a local update as you suggested. Better download it again. But frankly, I am finding the update more regressive than progressive.
Click to expand...
Click to collapse
Yup the download was corrupted, i redownloaded it and compared the checksum , Now its installed .. thank you
rspn69 said:
I think many of us may not be aware as how to perform local update in honor 7 which has marshmallow installed on it. I have gone through it and understand how it feels when you download an update and while trying to find local update option update app. Its frustrating and discouraging too. But I could find the way to do it on some other site. Its simple and easy. Just see below.
How to Update
Unpack the firmware package on your computer.
Transfer the extracted dload folder to your phone’s microSD card.
Take a backup of your important stuff using Huawei’s native app.
Safely unplug the USB cable and turn your phone off.
Reboot while holding Vol Up + Vol down + Power for a few seconds. Release Power upon vibration.
Once the upgrade starts let go of the volume keys and allow the installation to proceed.
And enjoy
Click to expand...
Click to collapse
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
I have currently PLK-UL00C675B160 on my phone from india , the link says its for
Honor 7 Firmware(PLK-UL00IN, Android 6.0, EMUI 4.0, C675B330CUSTC675D003, India, Flipkart)
Am a noob and i dont want to brick my phone ,Can i download it and install on on my Phone ?
Click to expand...
Click to collapse
Hi Ahmed, you can very well download and install the same. I have done that and have not found any bug till now since yesterday.
Works! Thanks!!
ahmedzj said:
Hi
I found the Marshmellow link for Honor 7
http://consumer.huawei.com/in/support/downloads/detail/index.htm?id=74584
Click to expand...
Click to collapse
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
seethahere said:
Thank you ahmedzj, for sharing the link. Much Appreciated.
It worked just fine. I upgraded from b304.
Click to expand...
Click to collapse
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Shevvy said:
Hi!
I was wondering if i could install the update from the download link that was shared... Im using a European device, could it work?
Click to expand...
Click to collapse
I think the European version file is over here - http://forum.xda-developers.com/honor-7/general/official-marshmallow-6-0-file-beta-b320-t3318570
Hi, mine is Malaysia set, now at latest firmware B130. Is it safe for me to update to B330 ?

Downgrade India PLK-UL00

Are you satisfied with your existing updated rom version? If yes then this thread is not for you.
But in any case if you are not satisfied with recent update and want to roll back then follow the official document in below link.
Link
Caution: Its only for Indian Version Honor 7
Pl do not forget to thank me if it helped and you can also donate me.
rspn69 said:
Are you satisfied with your existing updated rom version? If yes then this thread is not for you.
But in any case if you are not satisfied with recent update and want to roll back then follow the official document in below link.
Link
Caution: Its only for Indian Version Honor 7
Pl do not forget to thank me if it helped and you can also donate me.
Click to expand...
Click to collapse
Attached here is the roll back package for direct download
How could i ever thank you enough for this. God bless you. Thanks a ton
Remington78 said:
How could i ever thank you enough for this. God bless you. Thanks a ton
Click to expand...
Click to collapse
Its my pleasure buddy....after all sharing is caring....God bless you::good:
I have downgraded from b341 to b170 and then upgraded once again starting 304 till 341
It worked flawlessly
rspn69 said:
Attached here is the roll back package for direct download
Click to expand...
Click to collapse
press the thanks key in place of typing
rspn69 said:
Attached here is the roll back package for direct download
Click to expand...
Click to collapse
Hi buddy.
Which 5.0 build should I go for? I m using Honor 7 PLK-UL00 Indian version currently using the buggy MM 6.0 (PLK-UL00C675B341 build). I wanna roll back to 5.0 so I can make my external sd card as default storage, which isn't allowed in MM. Kindly suggest me which stable 5.0 version(mentioned below) would be best for me? Also if u can share the link containing step-by-step instructions on how to do that, that would be great. I got the ROMs from here - http://www.needrom.com/download/honor-7-plk-ul00/
Honor 7 PLK-UL00
Honor 7 PLK-UL00 - Update B121
Honor 7 PLK-UL00 - Update B132
Honor 7 PLK-UL00 - Update B150
Honor 7 PLK-UL00 - Update B162
Honor 7 PLK-UL00 - Update B173
Honor 7 PLK-UL00 - Update B188
Awaiting ur response. Thanks in advance
abhishekpandey said:
Hi buddy.
Which 5.0 build should I go for? I m using Honor 7 PLK-UL00 Indian version currently using the buggy MM 6.0 (PLK-UL00C675B341 build). I wanna roll back to 5.0 so I can make my external sd card as default storage, which isn't allowed in MM. Kindly suggest me which stable 5.0 version(mentioned below) would be best for me? Also if u can share the link containing step-by-step instructions on how to do that, that would be great. I got the ROMs from here - http://www.needrom.com/download/honor-7-plk-ul00/
Honor 7 PLK-UL00
Honor 7 PLK-UL00 - Update B121
Honor 7 PLK-UL00 - Update B132
Honor 7 PLK-UL00 - Update B150
Honor 7 PLK-UL00 - Update B162
Honor 7 PLK-UL00 - Update B173
Honor 7 PLK-UL00 - Update B188
Awaiting ur response. Thanks in advance
Click to expand...
Click to collapse
Before I answer your query regarding which version should you use, I would like to inform yo that I am using B341 and it has the option to use SD card as default storage. Pl check attached screen recording to enable the SD card. Secondly, I am afraid if all those version downloaded from needrom is applicable for Indian version. Pl check the pdf doc attached with the rom before flashing as it may brick your phone.
If you still need to roll back then follow the steps below:
1. Download the rollback package attached in post #2.
2. Copy it to dload folder in SD Card. (If dload does not exist then create one)
3. Switch off your mobile and wait for few seconds
4. Press volume up, volume down and power button and hold till phone vibrates
5. Leave all buttons and allow roll back package to be installed. Phone will restart automatically.
6. Download any version of Marshmallow of your choice but be careful that it should be for Indian variant only.
7. Delete the rollback package from dload folder and copy newly downloaded LL package and repeat the flashing procedure.
** Enjoy ..
rspn69 said:
Before I answer your query regarding which version should you use, I would like to inform yo that I am using B341 and it has the option to use SD card as default storage. Pl check attached screen recording to enable the SD card. Secondly, I am afraid if all those version downloaded from needrom is applicable for Indian version. Pl check the pdf doc attached with the rom before flashing as it may brick your phone.
If you still need to roll back then follow the steps below:
1. Download the rollback package attached in post #2.
2. Copy it to dload folder in SD Card. (If dload does not exist then create one)
3. Switch off your mobile and wait for few seconds
4. Press volume up, volume down and power button and hold till phone vibrates
5. Leave all buttons and allow roll back package to be installed. Phone will restart automatically.
6. Download any version of Marshmallow of your choice but be careful that it should be for Indian variant only.
7. Delete the rollback package from dload folder and copy newly downloaded LL package and repeat the flashing procedure.
** Enjoy ..
Click to expand...
Click to collapse
Did you check whether SD card is working as default storage?
Did your charging time get effected on 341?
My honor 7 got charged for like 45% in 122 minutes to be precise.
Where tf is fast charging gotta roll back asap.
I'll miss the screen recording and scrollshot in 5.0
Can you post the link for update.app for lollipop?
ankurjain94 said:
Can you post the link for update.app for lollipop?
Click to expand...
Click to collapse
Its already there in post #2 but I do not agree to your comment that fast charging, screen recording and screen shots are not available in B341. Can you let me know as how did you update and from which version to which version?
rspn69 said:
Its already there in post #2 but I do not agree to your comment that fast charging, screen recording and screen shots are not available in B341. Can you let me know as how did you update and from which version to which version?
Click to expand...
Click to collapse
It's in available in B341.
I am saying it won't be available in B170
And the doc file you shared, the second step for B170 is not working.
rspn69 said:
Did you check whether SD card is working as default storage?
Click to expand...
Click to collapse
Thank you first of all that you took out time to help me. I do understand that there is an option. I'm also using B341 but ever since I formatted my phone, that option isn't showing anymore. I've attached a screen for your reference. I was on lollipop when I got an OTA update of MM and I updated it. After that also that memory change option was there. Then a 182 MB OTA update came and I updated that too. Default memory option was still there. But then I factory restored my phone, still on B341 but that default memory option is gone, I don't know why
Surprisingly on twitter when I asked official honor support the same thing, they replied that in MM there's no such option by which I cud change default storage to external memory card. I was like....what the hell!! Bcoz I was using ext card as my default storage earlier on MM only.
Also there are lot of bugs like...
1. When I restart my phone I automatically get logged out of my apps like Twitter, One Drive etc.
2. My notification tones which I've set like custom notifications of Whats App and default tones of twitter etc gets set to default everytime I reboot my phone.
3. Also fast charging was blazing fast on this phone when it was on 5.0.X lollipop but ever since I updated to 6.0 MM, its not working that fast.
Waiting for your response. Also if you can tell me ur phone number so I cud reach u directly n sooner on Whats App or fb/twitter may be
Hullo, I am also looking to downgrade from MM (B341) to one of the earlier Lollipop versions ...
I was able to download the first file - the (transfer package) update.app
But... the link in the pdf file in post#2 (for PLK-UL00C675B170, THE FULL PACKAGE) doesnt have any Lollipop firmware to download - where / how do i get that?
needrom has a few options, but it agonizingly slow, and i would rather get the file from an official source....
What can i do?
Thanks.i am also thinking of downgrading to lollipop.Im not getting fast charging option after updating to marshmallow.u all getting fast charging option settings after marshmallow update?After update now it is taking more that 2 hours for full charge.Previously it was one hour only.Please help me to guide in this issue.Im confused whether i should downgrade or not.Im not at all satisfied after update.The default huwaei browser has gone.Now there is chrome only.For file trransfer usb mass storage mode of memory card is not available now
abhishekpandey said:
Thank you first of all that you took out time to help me. I do understand that there is an option. I'm also using B341 but ever since I formatted my phone, that option isn't showing anymore. I've attached a screen for your reference. I was on lollipop when I got an OTA update of MM and I updated it. After that also that memory change option was there. Then a 182 MB OTA update came and I updated that too. Default memory option was still there. But then I factory restored my phone, still on B341 but that default memory option is gone, I don't know why
Surprisingly on twitter when I asked official honor support the same thing, they replied that in MM there's no such option by which I cud change default storage to external memory card. I was like....what the hell!! Bcoz I was using ext card as my default storage earlier on MM only.
Also there are lot of bugs like...
1. When I restart my phone I automatically get logged out of my apps like Twitter, One Drive etc.
2. My notification tones which I've set like custom notifications of Whats App and default tones of twitter etc gets set to default everytime I reboot my phone.
3. Also fast charging was blazing fast on this phone when it was on 5.0.X lollipop but ever since I updated to 6.0 MM, its not working that fast.
Waiting for your response. Also if you can tell me ur phone number so I cud reach u directly n sooner on Whats App or fb/twitter may be
Click to expand...
Click to collapse
Hi Abhishek, I suggest you to downgrade to lollipop and again upgrade to marshmallow. But But this time you upgrade directly to B341 from B170. Factory restore after up gradation and see. Hope this will help you get the functionality.
rspn69 said:
Hi Abhishek, I suggest you to downgrade to lollipop and again upgrade to marshmallow. But But this time you upgrade directly to B341 from B170. Factory restore after up gradation and see. Hope this will help you get the functionality.
Click to expand...
Click to collapse
Hey buddy,
You want me to downgrade to Lollipop so kindly tell me how to downgrade my firmware to lollipop? I don't have 5.0 firmware for my phone. However I have that update.zip of yours.
abhishekpandey said:
Hey buddy,
You want me to downgrade to Lollipop so kindly tell me how to downgrade my firmware to lollipop? I don't have 5.0 firmware for my phone. However I have that update.zip of yours.
Click to expand...
Click to collapse
I have the firmware but uploading will take some time because of its size ie more than 1.5 gb

Huawei p8 GRA-L09 C109B190 Marshmallow update

Hello, just want to know how to update my phone to Marshmallow?
Model: Huawei GRA-L09
Build: GRA-L09 C109B190
Android version: 5.0.2
EMUI version: EMUI 3.1
Thank you so much in advance
You don't mention which country & network operator, so safest way for now is to try an OTA update from within your phone: Settings > Update > Check for updates.
Also try: HiCare app > Me tab > Check for updates and HiCare app > Service tab > OS Upgrade Early Adopters
If already done, & it doesn't work, & you are from France & purchased the phone from Orange, then follow bflatmajor's successful method (1st & last post) in this thread: Huawei P8 help request
Edit: Also, from B200, it should be possible to go to B370 next (so you can skip the B321a update).
If you are from a different country & operator, please let us know.
It is not clear from bflatmajor's thread exactly which pages/tutorials/downloads he used on the German site to do the updates. Also, it looks like he updated B190 to B200 first, then to B321a - so would be best to post in the above thread to confirm this, & also the pages/tutorials/downloads he used on the German site.
Precautions & Disclaimer:
1. Before attempting, make sure you have done a thorough, restorable backup
2. Have enough battery power remaining (or keep it plugged in during the update)
3. Do not interrupt the updating process in any way
4. After updating to Marshmallow using bflatmajor's method, your phone will most probably not receive any more OTA updates from Orange, & may also invalidate the phone's warranty.
5. If anything goes wrong, you could end up with a bricked/non-working/irreparable phone, which is your responsibility alone. So, if it is working fine now, best to leave alone.

Updating to nougat help

Hi I have a Australia mate 8 phone build number
NXT-L09C346B130 I have tried different updates for L09 but it gets to 30% during the update and fails each time. Any help or guidance would be greatfull.
Thanks
Capelord
Nougat Update - process Huawei Mate 8
capelord said:
Hi I have a Australia mate 8 phone build number
NXT-L09C346B130 I have tried different updates for L09 but it gets to 30% during the update and fails each time. Any help or guidance would be greatfull.
Thanks
Capelord
Click to expand...
Click to collapse
Hi,
I have NXT-AL10 and I updated to Android Nougat two days back. Here is how I did. First step is to get the Huawei ID.
1) I followed the instructions in this youtube video. Watch the video and you will know where to click on that fancy looking icon on webpage to get the code. once you get the code,put in your email, type the password, confirm the password and done.
I found an english website where you can register for Huawei ID Click Here
2) You now have the Huawei ID.
3) Go to settings and then log in using the Huawei ID in (screenshot attached below)
4) In the settings - > go to Huawei ID -> put in your login credentials and you should see "account center" on top. Below you should see member -> gold membership. Click on that. (screenshot attached below)
5) Now you will see Manuals, Service, Forum, Member. From this click on "service" and below select - > update (screenshot attached below)
6) Here you will see Nougat update. It will be 2.10 gb and you can update to Nougat very easily from here. It is matter of few minutes before it restarts and finishes the Nougat update process.
This process doesn't require any root and it takes a total of 20 minutes or so. Since my Mate 8 and didn't want to root so quickly, I followed this procedure. And it worked. Now Mate 8 is butter smooth. It is really worth. My mate 8 is different model than yours so I dont know if you can do the same process but you can try and see if it works out for you. Hope I explained properly and hope you succeed.
Cheers!
Sam
Samavb said:
Hi,
I have NXT-AL10 and I updated to Android Nougat two days back. Here is how I did. First step is to get the Huawei ID.
1) I followed the instructions in this youtube video. Watch the video and you will know where to click on that fancy looking icon on webpage to get the code. once you get the code,put in your email, type the password, confirm the password and done.
I found an english website where you can register for Huawei ID Click Here
2) You now have the Huawei ID.
3) Go to settings and then log in using the Huawei ID in (screenshot attached below)
4) In the settings - > go to Huawei ID -> put in your login credentials and you should see "account center" on top. Below you should see member -> gold membership. Click on that. (screenshot attached below)
5) Now you will see Manuals, Service, Forum, Member. From this click on "service" and below select - > update (screenshot attached below)
6) Here you will see Nougat update. It will be 2.10 gb and you can update to Nougat very easily from here. It is matter of few minutes before it restarts and finishes the Nougat update process.
This process doesn't require any root and it takes a total of 20 minutes or so. Since my Mate 8 and didn't want to root so quickly, I followed this procedure. And it worked. Now Mate 8 is butter smooth. It is really worth. My mate 8 is different model than yours so I dont know if you can do the same process but you can try and see if it works out for you. Hope I explained properly and hope you succeed.
Cheers!
Sam
Click to expand...
Click to collapse
THIS WORKS. Why Huawei has to make this process so complicated is beyond me, but after countless attempts at getting to nougat via fastboot, twrp, etc, I am finally downloading the legit OTA with this method.
Samavb said:
Hi,
I have NXT-AL10 and I updated to Android Nougat two days back. Here is how I did. First step is to get the Huawei ID.
1) I followed the instructions in this youtube video. Watch the video and you will know where to click on that fancy looking icon on webpage to get the code. once you get the code,put in your email, type the password, confirm the password and done.
I found an english website where you can register for Huawei ID Click Here
2) You now have the Huawei ID.
3) Go to settings and then log in using the Huawei ID in (screenshot attached below)
4) In the settings - > go to Huawei ID -> put in your login credentials and you should see "account center" on top. Below you should see member -> gold membership. Click on that. (screenshot attached below)
5) Now you will see Manuals, Service, Forum, Member. From this click on "service" and below select - > update (screenshot attached below)
6) Here you will see Nougat update. It will be 2.10 gb and you can update to Nougat very easily from here. It is matter of few minutes before it restarts and finishes the Nougat update process.
This process doesn't require any root and it takes a total of 20 minutes or so. Since my Mate 8 and didn't want to root so quickly, I followed this procedure. And it worked. Now Mate 8 is butter smooth. It is really worth. My mate 8 is different model than yours so I dont know if you can do the same process but you can try and see if it works out for you. Hope I explained properly and hope you succeed.
Cheers!
Sam
Click to expand...
Click to collapse
I have NXT L29. I tried your method, but in my phone there is no sign of gold member.
How to obtain the gold member?
I can't see the huawei services inside my huawei ID.
Thanks
Huawei Membership & Services
Ms7Android said:
I have NXT L29. I tried your method, but in my phone there is no sign of gold member.
How to obtain the gold member?
I can't see the huawei services inside my huawei ID.
Thanks
Click to expand...
Click to collapse
Hi,
I didn't do anything special to get gold membership. When I logged in with my Huawei ID it was automatically showing Gold Membership.
Your model is NXT-L29 , since it is an international model may be because of that reason you are not able to see I think.
But to show the Huawei services you can try the following steps.
1) Open the Huawei ID
2) Click on the membership details ( If you have the option, I hope it is showing some kind of membership )
3) Select - member -> settings ( screenshot attached )
4) Then under Settings - > Location ( screenshot attached )
5) Under Location - > Select "China" & region -> Asia Pacific (Screenshot attached ) [You can change this to your region any time later]
6) Now go to Service - > Update ( Here you should see the new OS version and size of the file if everything is ok)
This process worked for me because my phone model is NXT-AL10. I purchased just few days back. As soon I received it, I did it this way as I felt this was lot safer and easier. You can also try the above steps. If it works then you will be able to update to Android Nougat very easily. Nougat is really awesome on Huawei Mate 8. Give it a try. I hope it works for you.
Cheers!
Sam
Hi Sam, ok i have registered for Huawei ID (english link is SOOOO good).
then, i need to install new version of HiCare and it installs Huawei ID for me. after that i can login with my Huawei ID, and see the member/service/manual/me menus, but after go into "OS Update early adopter" there is nothing.
Maybe because im still at emui 4.0?? (NXT-L09C636B211).
but there is no more update for me (checked from the seettings -> updater
Upate - Location - China
erwinsie said:
Hi Sam, ok i have registered for Huawei ID (english link is SOOOO good).
then, i need to install new version of HiCare and it installs Huawei ID for me. after that i can login with my Huawei ID, and see the member/service/manual/me menus, but after go into "OS Update early adopter" there is nothing.
Maybe because im still at emui 4.0?? (NXT-L09C636B211).
but there is no more update for me (checked from the seettings -> updater
Click to expand...
Click to collapse
Hi,
You have done everything right.
Is yours single sim chinese model? NXT-L09
if yes, then it should work unless they explicitly allowed only NXT-AL10 to do it this way which I doubt that is the case here.
Did you set the location to china?
Do you have same menus or is it different? Please check the screenshots if you and I have same options in that App.
I am asking this because I didn't have "OS update early adopter". For me, I just see service and under that "update". Another thing is I used Huawei ID from settings directly even though Hicare was showing the same thing.
I received a new update B573 today. I hope you get it too.
My update process - > EMUI 4.0 -> EMUI 4.1 -> EMUI 5.0. When I received my phone I got update for EMUI 4.1 and then I updated to 5.0. That is how it happened for me.
Cheers!
Sam
Samavb said:
Hi,
You have done everything right.
Is yours single sim chinese model? NXT-L09
if yes, then it should work unless they explicitly allowed only NXT-AL10 to do it this way which I doubt that is the case here. Did you set the location to china? Do you have same menus or is it different? Please check the screenshots if you and I have same options in that App. I am asking this because I didn't have "OS update early adopter". For me, I just see service and under that "update". Another thing is I used Huawei ID from settings directly even though Hicare was showing the same thing. I received a new update B573 today. I hope you get it too.
My update process - > EMUI 4.0 -> EMUI 4.1 -> EMUI 5.0. When I received my phone I got update for EMUI 4.1 and then I updated to 5.0. That is how it happened for me.
Cheers!
Sam
Click to expand...
Click to collapse
Hi.
No, mine is single sim but L09C636xxx. I am from Australia and this is the official mate 8 that is sold in my country.
therefore when i select region i choose Australia not China.
No the menus are slightly different and i have less icons. also the icon i have is "OS update early adopter" not just "update".
i tried to go from huawei ID from settings directly but cannot find services (and not gold membership either). just account and then next screen is "phone" and "email". i really need to go from HiCare to see "service" menu.
also, my latest is B211 and this is still 4.0 i dont have emui 4.1 yet maybe thats why...
many people say this model L09 is not good because less support from huawei.
thanks anyway will wait for emui 5 maybe next year
It is still possible
erwinsie said:
Hi.
No, mine is single sim but L09C636xxx. I am from Australia and this is the official mate 8 that is sold in my country.
therefore when i select region i choose Australia not China.
No the menus are slightly different and i have less icons. also the icon i have is "OS update early adopter" not just "update".
i tried to go from huawei ID from settings directly but cannot find services (and not gold membership either). just account and then next screen is "phone" and "email". i really need to go from HiCare to see "service" menu.
also, my latest is B211 and this is still 4.0 i dont have emui 4.1 yet maybe thats why...
many people say this model L09 is not good because less support from huawei.
thanks anyway will wait for emui 5 maybe next year
Click to expand...
Click to collapse
Hi,
Yes menus are slightly different.
The version of my HiCare is 5.0.1.303.
But you can get those extra options by changing the location from Australia to China and region to Asia pacific (its just temporary). I am in US.
This process is reversible. I tried it on my phone. when I changed my location to US on the phone, I didn't see lot of options but the moment I changed it back to China I was able to see all the options.Since you are not doing anything risky, it is worth a try because Android Nougat is really amazing.
You can try one last time by changing the location and see if it works. If you succeed your phone will have Nougat and if you don't at the most what can happen is you won't see any update.
So it is not all over. You still have that opportunity to update to Nougat by doing this way.
This phone is a beast and it will feel like a completely different phone with Nougat.
I want you to enjoy that and feel the difference. I am sorry if I am being too pushy. I am just excited about this phone because I feel your phone is just one step closer to Android Nougat. And that is why I am encouraging you to give one last try. I hope you succeed. Good luck.
Cheers!
Sam
I tried to change my location, but when I choose China, after i save it, it turns back to my location (Poland). Any solutions?
klekot31 said:
I tried to change my location, but when I choose China, after i save it, it turns back to my location (Poland). Any solutions?
Click to expand...
Click to collapse
Hi,
Did you change the region to Asia Pacific? if not please do that also. You have to change the region to Asia Pacific along with location to China. Both of these steps are important and required. That option is just above the place where you change the location to China.
I hope it works for you.
Cheers!
Sam
I tried it few times and it keeps returning to Europe and Poland :/
klekot31 said:
I tried it few times and it keeps returning to Poland and Polish :/
Click to expand...
Click to collapse
Hi,
Sorry to hear that.
Sam
Samavb said:
Hi,
Yes menus are slightly different.
The version of my HiCare is 5.0.1.303.
But you can get those extra options by changing the location from Australia to China and region to Asia pacific (its just temporary). I am in US.
Sam
Click to expand...
Click to collapse
my hicare is 5.01.302 and there is no new update.
alright i tried to changed to china and asia pacific, and then i got pop up "please use your huawei id registered in china" but it seems to work, as under service now i got ALOT of icons like your screens, including trade in, self service, parts prices, repair progress, etc and "update"!
but under update, i got no updates available.
will try to register for huawei id from chinese website later tonight to see if that make differences.
cheers
Update - Hope
erwinsie said:
my hicare is 5.01.302 and there is no new update.
alright i tried to changed to china and asia pacific, and then i got pop up "please use your huawei id registered in china" but it seems to work, as under service now i got ALOT of icons like your screens, including trade in, self service, parts prices, repair progress, etc and "update"!
but under update, i got no updates available.
will try to register for huawei id from chinese website later tonight to see if that make differences.
cheers
Click to expand...
Click to collapse
Hi, 
 @erwinsie & @klekot31
You both still have hope. Different countries get update at different times.
So the update might take a little time to reach your country.
I am saying this because, I saw Google+ post in Huawei mate 8 community for italy where they received the B573 first but I didn't see the update until 2 days later. I was also little sad at first but suddenly I saw the update and boom I updated it Nougat latest version.
So my sincere request. Please put the country as China, region as asia pacific and then leave it for few days or say 10 days or may be a month. You might see the update suddenly popping up on your screen. It should work. You can always revert this back to your region and country once you finish installing Nougat. It is reversible process. So from my experience it is not all over for you guys. You still have hope. It is just a matter of time. Even though you don't see the update for the moment, it is not over you might see it in coming days or weeks.
Cheers!
Sam
Samavb said:
Hi,
@erwinsie & @klekot31
You both still have hope. Different countries get update at different times.
So my sincere request. Please put the country as China, region as asia pacific and then leave it for few days or say 10 days or may be a month. You might see the update suddenly popping up on your screen.
Sam
Click to expand...
Click to collapse
sure will do! and thank you
I have a NXT-L09 too in New Zealand (Asia Pacific) I followed all this so I can upgrade from Mashmellow to Nougat and it keeps saying I have the latest software and no software is made available from early adopters
Seems odd that its Oct 2018 and I have to stay on Mashmellow. When I tried a manual update by downloading the firmware and using the stock loader it fails at 5%

Categories

Resources