Database Users

P9 Lite bricked

Device: VNS-L21 Europe Hello, before brick I was on new emui 5.0 firmware and I installed nougat twrp recovery by user @BadWolfYe and then I flashed this rom: https://forum.xda-developers.com/huawei-p9lite/development/unofficial-huawei-p9-lite-t3540493 (I was following all instructions) After reboot It was stuck on Phone is booting... And I tried downgrade guide from this thread: https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932 I flashed oeminfo zip and dloaded update.app but unfornately zip where I get update.app was corrupted..... Now I have only Huawei eRecovery, dload and fastboot but It doesn't allow installing twrp!!! When I dload UPDATE.APP It says Software install failed. Failed to check the update package. Please download the package again. Please help me!!!!!!
EDIT: I found solution to enter in real recovery(TWRP for nougat)
What I did was:
1. Enter in fastboot
2. connect phone to computer
3. open cmd and type: fastboot -i 0x0fce oem unlock xxxxxxxx (replace xxx with your code)
4. accept fastboot unlock
5. And then it magicaly booted into twrp (my phone's fastboot was unlocked before)
Now I am going to flash back emui 5.0
And then downgrade to emui 4.1
And then I will try to install this: https://forum.xda-developers.com/huawei-p9lite/development/unofficial-huawei-p9-lite-t3540493
Later I will update this post and I will write does it suceed or fail.
Edit 2:
I flashed emui 5.0 with dload and UPDATE.APP

Try to recover your phone using hisuite ?

simo255 said:
Try to recover your phone using hisuite ?
Click to expand...
Click to collapse
I wrote an edit how I repaired my phone

hello, i'm using Huawei P9 Lite VNS-L21. i tried to flash the stock nougat Firmware Which i actually did and it worked flawless! but there was a little problem because there wasn't any Software update option in there, so after that i wanted to downgrade to stock MM. IDK what happened wrong while installing that, my phone got BRICKED. i don't have the Erecovery and twrp either. i cant flash firmware via DLOAD Method. the only thing i have is FASTBOOT mode..
i tried literally everything.. but nothing working..
I sent it to HUAWEI CUSTOMER CARE and they returned it back after a couple of days...
im really very worried because ive been using this phone for like 2 months ... and now im helplesss, If anybody is reading this please help/ assist me out of this..

VNS L31 Bricked HELP

I was on nougat C432B370 and it was buggy so I decided to rollback to MM.I flashed C432 oeminfo and put update.app into dload folder.It worked 3 times before and now the update finished with succsess but I didnt get optimizing system thingie,and when it tried to boot it couldnt.,it just got to erecovery with shutdown,restart and fix options(fix one doesnt work).Bootloader is still locked but i cant flash any recovery via adb,says command not allowed. HELP

Flashing oeminfo locks the bootloader. Did you unlock it again afterwards?

zgomot said:
Flashing oeminfo locks the bootloader. Did you unlock it again afterwards?
Click to expand...
Click to collapse
I didnt,and I resolved the issue,and youre not gonna believe what was the reason. I installed update via three button method and it succseeded but didnt work,then I did it again.Third time i put my sim card in my phone,updated and it worked.LOL

Flashed wrong oeminfo (L21 on L31) , FRP lock present , dload possible?

Like the title already says, I wrongly flashed the oeminfo of the L21 C432 on my L31 .
Now when I want to rewrite the oeminfo via fastboot I have no access because there is a FRP lock (Bootloader unlocked).
Currently I only see two options:
1. Try to flash a firmware via dload (tried some already, not working) and then flash the original oeminfo again. But is the firmware of a L21 even runnable on the L31?
2. Use DC-Unlock. The question is what should I use there? Is flashing a completely new firmware also overwriting the bad oeminfo? I don´t think so. Or should I remove the FRP lock, flash a new oeminfo and hope that dload is working then?
I hope someone can help me. Such a stupid mistake is just so frustrating, didn´t happen to me in all the years of flashing phones

you can try the dload method using a L21 firmware...

str8t said:
Like the title already says, I wrongly flashed the oeminfo of the L21 C432 on my L31 .
Now when I want to rewrite the oeminfo via fastboot I have no access because there is a FRP lock (Bootloader unlocked).
Currently I only see two options:
1. Try to flash a firmware via dload (tried some already, not working) and then flash the original oeminfo again. But is the firmware of a L21 even runnable on the L31?
2. Use DC-Unlock. The question is what should I use there? Is flashing a completely new firmware also overwriting the bad oeminfo? I don´t think so. Or should I remove the FRP lock, flash a new oeminfo and hope that dload is working then?
I hope someone can help me. Such a stupid mistake is just so frustrating, didn´t happen to me in all the years of flashing phones
Click to expand...
Click to collapse
did you ever manage to fix this? I'm stuck in the same loop except my frp is unlocked but my bootloader is locked (Shows in the fastboot white screen mode) I tried to flash via dload method everything from B150 till B380! I was running Nougat rooted and I wanted to downgrade back to MM via flashing oem from twrp but I messed things up!

i cant even dload firstly because i have twrp and 2nd my phone goes stright to erecovery and i cannot find a way to either flash my oem info from twrp back up on my pc or to get new firmware.

Serial Number

So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:

p9 lite bricked
Ngii_ said:
So my phone died and it was fixed somehow, bootloader is unlocked but OEM isn't so I'm failing to flash twrp and I can't root it, I can't do anything except flash the stock images from UPDATE.APP (extracted), the issue is that I can't get my bootloader unlock code from huawei because my serial number is now: 0123456789ABCDEF.
the original bootloader unlock code isn't working. can anybody help me? please. it's driving me nuts, oh and it's model number in hi6250
c900b161
Huawei p9 lite.:crying:
Click to expand...
Click to collapse
i have the same problem, i dont unlock my bootloader, i buy my divice in usa and i update in argentina, now the device dosen't start.
if i tried to turn on it do the huawei logo twice and then give it to me 3 options
-Download latest version and recovery
-reboot
-shuttdown
i try to download the upgrade using the first option and flash an update.app from the sd card, but it says "failed"
in fastboot and rescue mode "frp is lock" and "phone lock"
any suggestion or proces is welcome!
sorry, im from argentina and English isn't my first language

I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app

mutahharbashir said:
I am here to tell
I have managed to fix p9 lite phone. This phone had damaged oeminfo. And bootloader partition was damaged too.
1. Flashed factory firmware
2. Rooted with one click root without bootloader unlock
3. Installed flashify
4. Flashed twrp through flashify.
5. Flashed missing oem info
6. Flashed stock firmware.
7. Factory reset.
8. Done
Sent from my HUAWEI MT7-TL10 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ohhhhhhh good explanation friend.
Can explayn to all how flash TWRP with Bootloader UNLOCKED....but w/o OEM lost, so with Serial 123456xxxxxx????
I've flashed by Professional tool, BOARD + FULL Update.App + Custom fw (vendor/country), flash perfect but phone always in Bootloop becouse "Bootloader Unlocked" and Fake Serial.
Explain please, is easy when phone isn't Bricked and can enter in "Manufacture Mode"....but with phone only in Fastboot or Recovery how you do?

P9 lite brick and can not find right oeminfo. Please read and help me!

My original P9 lite is VNS-L22C635 , it japan version, unlocked bootloader, twrp, and changed oeminfo to L21C432.
Now, my device can update succesful firmware C432 by dload method, but when it done and restart, it stuck on Huawei device animation. I tried every way, even change Oem to C636 and dload, still stuck huawei logo. Not boot to system.
I think i flashed wrong firmware, even changed device to another oem. Can anybody share me C635 oeminfo, i can not find one on interner. . May be after change oeminfo to original, and dload firmware, it can live again. Maybe, i not sure !
Please help me. Thanks

Unlock bootloader and try flashing via fastboot. Fastboot flash boot boot.img
...system.img...recovery.img
(Must unpack UPDATE.APP)