Downgrade from 7.1.1 to MM? for Xposed. - ZTE Axon 7 Questions & Answers

Wondering if you can downgrade from Nougat to MM so i can have Xposed (found out no nougat xposed after upgrading)
A2017U
Stock 7.1.1
Kernal Version: 3.18.31
Build Number: B19
Bootloader unlocked and Rooted
Also, do you recommend a certain custom MM rom? which, why?

tehargonaut said:
Wondering if you can downgrade from Nougat to MM so i can have Xposed (found out no nougat xposed after upgrading)
A2017U
Stock 7.1.1
Kernal Version: 3.18.31
Build Number: B19
Bootloader unlocked and Rooted
Also, do you recommend a certain custom MM rom? which, why?
Click to expand...
Click to collapse
I think you can downgrade to MM by downloading the official MM update from somewhere and using the MiFavor updater. Otherwise I don't know since I own a G version, but it usually is as simple as flashing the full zip

tehargonaut said:
Wondering if you can downgrade from Nougat to MM so i can have Xposed (found out no nougat xposed after upgrading)
A2017U
Stock 7.1.1
Kernal Version: 3.18.31
Build Number: B19
Bootloader unlocked and Rooted
Also, do you recommend a certain custom MM rom? which, why?
Click to expand...
Click to collapse
Yes you can but curious about which modules are you missing?

You can downgrade using the B29 EDL file. It works very well. Maybe a third party rom will make up for the missing xposed modules?

Nik2424 said:
Yes you can but curious about which modules are you missing?
Click to expand...
Click to collapse
Mainly:
Gravity box
YouTube adaway
YouTube background playback
Boot manager
Performance profile
Minminguard
No safe volume warning

Choose an username... said:
I think you can downgrade to MM by downloading the official MM update from somewhere and using the MiFavor updater. Otherwise I don't know since I own a G version, but it usually is as simple as flashing the full zip
Click to expand...
Click to collapse
Factory reset and then flash from sd card?
gpz1100 said:
You can downgrade using the B29 EDL file. It works very well. Maybe a third party rom will make up for the missing xposed modules?
Click to expand...
Click to collapse
Link? And is that a TWRP flash? Sorry I just got my axon and I'm still pretty new to its mod stuff

tehargonaut said:
Mainly:
Gravity box
YouTube adaway
YouTube background playback
Boot manager
Performance profile
Minminguard
No safe volume warning
Click to expand...
Click to collapse
Gravity Box- Idk what features u r using in it but for that one you'll have to get a custom rom like resurrection remix.
For youtube adway + background: here is what I use on stock nougat:
https://forum.xda-developers.com/android/apps-games/app-iytbp-injected-youtube-background-t3560900
works perfectly.
Boot Manager - you can use servicely
Performance profile- you can use Ex Kernel Manager and set a custom perf profile then create a widget shortcut to it on ur home screen.
minminguard - you can use Adclear, which is free but I haven't tried it personally:
https://forum.xda-developers.com/android/apps-games/app-adclear-root-version-ad-blocker-t3309011
however I use Adguard, but you have to pay: $10 for 2 devices for 1 yr and it works perfectly.
safe volume -custom rom

Nik2424 said:
Gravity Box- Idk what features u r using in it but for that one you'll have to get a custom rom like resurrection remix.
For youtube adway + background: here is what I use on stock nougat:
https://forum.xda-developers.com/android/apps-games/app-iytbp-injected-youtube-background-t3560900
works perfectly.
Boot Manager - you can use servicely
Performance profile- you can use Ex Kernel Manager and set a custom perf profile then create a widget shortcut to it on ur home screen.
minminguard - you can use Adclear, which is free but I haven't tried it personally:
https://forum.xda-developers.com/android/apps-games/app-adclear-root-version-ad-blocker-t3309011
however I use Adguard, but you have to pay: $10 for 2 devices for 1 yr and it works perfectly.
safe volume -custom rom
Click to expand...
Click to collapse
The YouTube fix was great
Is their an alternative to servicely? One possiably simpler like boot manager? I'm just trying to stop apps from autostarting on boot

tehargonaut said:
The YouTube fix was great
Is their an alternative to servicely? One possiably simpler like boot manager? I'm just trying to stop apps from autostarting on boot
Click to expand...
Click to collapse
You can use the built in power manager to prevent autostart of apps. Its under settings

tehargonaut said:
Factory reset and then flash from sd card?
Click to expand...
Click to collapse
No. Simply put the zip on the SD and go to tge settings and Updates, and it should appear after the scan. MiFavor will determine whether it needs to reset the phone or not, which will probably be needed
Then you have EDL, a valid solution too. I think the other guy was talkimg about MiFlash. What you have to do is either turn the phone off, wait some seconds and hold the 2 volume buttons as you connect the USB on your phone, OR use
adb reboot edl
from the system. After that the phone looks like it's off. it isn't. The driver has to be Qualcomm HS-USB QDLoader 9008 under Ports (COM&LPT) in Device Manager.
If it appears as an unknown device called QUSB_BULK you just search the name that I told you before and add a "drivers" at the end to get the drivers.
If you have that, get MiFlash and the B29 folder, and select the folder on MiFlash. Then click refresh, it should appear. Then flash. after it's done you should get stock recovery and MM

Choose an username... said:
No. Simply put the zip on the SD and go to tge settings and Updates, and it should appear after the scan. MiFavor will determine whether it needs to reset the phone or not, which will probably be needed
Then you have EDL, a valid solution too. I think the other guy was talkimg about MiFlash. What you have to do is either turn the phone off, wait some seconds and hold the 2 volume buttons as you connect the USB on your phone, OR use
adb reboot edl
from the system. After that the phone looks like it's off. it isn't. The driver has to be Qualcomm HS-USB QDLoader 9008 under Ports (COM&LPT) in Device Manager.
If it appears as an unknown device called QUSB_BULK you just search the name that I told you before and add a "drivers" at the end to get the drivers.
If you have that, get MiFlash and the B29 folder, and select the folder on MiFlash. Then click refresh, it should appear. Then flash. after it's done you should get stock recovery and MM
Click to expand...
Click to collapse
i successfully went back to stock MM and kept unlock but i cant get twrp to flash, every time i do i get - fastboot device not connected, make sure the drivers are correct, etc.
and i need twrp to flash root

tehargonaut said:
i successfully went back to stock MM and kept unlock but i cant get twrp to flash, every time i do i get - fastboot device not connected, make sure the drivers are correct, etc.
and i need twrp to flash root
Click to expand...
Click to collapse
what? Fastboot?
Well I guess you can also do it with Fastboot, but I told you to do it with axon7tool which has nothing to do with Fastboot
---------- Post added at 03:53 PM ---------- Previous post was at 03:52 PM ----------
Sheet sorry no I didn't. Go to my Reinstall TWRP and root after update to Nougat guide and do the process
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
But don't do the WHOLE fastboot process! Just until you get TWRP. The other part is for Nougat

Related

[Q&A][FAQ][TW][N][7.0][SM-G935F/FD/K/L/S/W8] SuperMan/SuperStock-Rom

Hello guys, I open a Question and Answer Thread for all SuperMan Rom users, so even users under 10 posts can ask their questions here.
Below I added some basic Q&A stuff which can also be found at the main thread, if you have any question, read through them before posting, thanks!
In case you search for the changelog have a look: Changelog post
If you want to see my post with all useful links such as TWRP, magisk, xposed and more visit: useful post​
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G935F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread
volte support
please help volte is not there i need that to make calls and sms
beinggamer97 said:
please help volte is not there i need that to make calls and sms
Click to expand...
Click to collapse
Flash your providers csc
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Flash your providers csc
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Thanks man after flashing that csc my volte is working
TouchWiz page effect
I've flashed Superkernel and selected moddedUI mod in Aroma installer. No matter which TouchWiz page effect I select within the Superman Control v2.0 app, the page effect just sticks to default effect.
Am I the only one with this issue?
Grafdude said:
I've flashed Superkernel and selected moddedUI mod in Aroma installer. No matter which TouchWiz page effect I select within the Superman Control v2.0 app, the page effect just sticks to default effect.
Am I the only one with this issue?
Click to expand...
Click to collapse
You have to reboot everytime you change a settings. Plus modded services plus modded launcher are needed
Tkkg1994 said:
You have to reboot everytime you change a settings. Plus modded services plus modded launcher are needed
Click to expand...
Click to collapse
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
---------- Post added at 12:56 PM ---------- Previous post was at 12:33 PM ----------
Grafdude said:
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
Click to expand...
Click to collapse
Disregard what I said, its working now for some reason...lol.
I had another thing to point out regarding the appearance of the corners of rounded UI, I think there might be a problem with the actual image transparency? I've attached image to point out. Click link below
https://drive.google.com/open?id=0B6CqBfmqPw5ebVhDbzgyamtmUU0
Grafdude said:
Thank you Tkkg1994 for your quick reply, by the way your rom is awesome and I'd like to thank you for developing it! So yeah ive selected modded launcher plus services in Aroma, even after a reboot the page effect remains the same.
---------- Post added at 12:56 PM ---------- Previous post was at 12:33 PM ----------
Disregard what I said, its working now for some reason...lol.
I had another thing to point out regarding the appearance of the corners of rounded UI, I think there might be a problem with the actual image transparency? I've attached image to point out. Click link below
https://drive.google.com/open?id=0B6CqBfmqPw5ebVhDbzgyamtmUU0
Click to expand...
Click to collapse
Good it works for you now
I don't see any issue on this (about the rounded ones)
Ok here's a couple of closeup images, to make it clearer.
https://drive.google.com/open?id=0B6CqBfmqPw5eT1NsVl9zaS1qZlk
https://drive.google.com/open?id=0B6CqBfmqPw5eSXRJRC02ZGUzajg
---------- Post added at 01:19 PM ---------- Previous post was at 01:03 PM ----------
Also, Tkkg1994, is there a way to restore the stock Data icon in the status bar? (LTE instead of the 4G)
Grafdude said:
Ok here's a couple of closeup images, to make it clearer.
https://drive.google.com/open?id=0B6CqBfmqPw5eT1NsVl9zaS1qZlk
https://drive.google.com/open?id=0B6CqBfmqPw5eSXRJRC02ZGUzajg
---------- Post added at 01:19 PM ---------- Previous post was at 01:03 PM ----------
Also, Tkkg1994, is there a way to restore the stock Data icon in the status bar? (LTE instead of the 4G)
Click to expand...
Click to collapse
See what you mean now thanks. Can't make it more "slighter" then I already did sorry
About the 4G this is csc related
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
See what you mean now thanks. Can't make it more "slighter" then I already did sorry
About the 4G this is csc related
Click to expand...
Click to collapse
Allright much thanks for your help, really appreciate it!
How to apply themes?
Hi there, first off thanks for the time spent developing the ROM and helping us out!
When I try to go to the theme section of the stock settings the app fc (stays for forced close right? Sorry, not being an expert here).
I'm quite a dark theme fanatic and I'd really like to get one for my S7 Edge.
Is there maybe something that I don't know?
Thanks
---------- Post added at 02:23 PM ---------- Previous post was at 01:55 PM ----------
il.pella said:
Hi there, first off thanks for the time spent developing the ROM and helping us out!
When I try to go to the theme section of the stock settings the app fc (stays for forced close right? Sorry, not being an expert here).
I'm quite a dark theme fanatic and I'd really like to get one for my S7 Edge.
Is there maybe something that I don't know?
Thanks
Click to expand...
Click to collapse
OK I found the issue (thanks to Tkkg1994 for having it answered to another user), I just debloated theme store when installing the ROM!
Cannot install Stock Kernel
Whenever i try to install Stock Kernel on 1.14 i got bootloop i tried many ways , without modded services, even full stock everything and nothing is working, superstock kernel works fine but just wondering why stock kernel on G935F is not
arbreton said:
Whenever i try to install Stock Kernel on 1.14 i got bootloop i tried many ways , without modded services, even full stock everything and nothing is working, superstock kernel works fine but just wondering why stock kernel on G935F is not
Click to expand...
Click to collapse
You can install it BUT without: Magisk, xposed and phh. This things only work on superstock/superkernel!!
Tkkg1994 said:
You can install it BUT without: Magisk, xposed and phh. This things only work on superstock/superkernel!!
Click to expand...
Click to collapse
I keep getting a bootloop , did a full wipe of everything and tried without super su or magisk or xposed but the stock kernel still not working, other kernels work flawlessly
SM-G935F
deleted
arbreton said:
I keep getting a bootloop , did a full wipe of everything and tried without super su or magisk or xposed but the stock kernel still not working, other kernels work flawlessly
SM-G935F
Click to expand...
Click to collapse
I tested before with stock and all works as it should. You use any root method?
Sent from my SuperMan powered SM-G930F
Hi there, I was testing the user section of the ROM, and anytime I switch to a different user (guest or newly created), I got a persistent "unfortunately IMS service has stopped working" every couple of seconds or less. Couldn't get a solution browsing forums, it seems that must be an app conflicting with the system, but I'm not that tech savvy to know for sure...
Thanks in advance if you know what's going on!
I've flashed v1.14.5 and the "briefing" panel on the homescreen has been replaced by "6thgear TWSwipe"? Is there a setting to have the briefing panel instead?
il.pella said:
Hi there, I was testing the user section of the ROM, and anytime I switch to a different user (guest or newly created), I got a persistent "unfortunately IMS service has stopped working" every couple of seconds or less. Couldn't get a solution browsing forums, it seems that must be an app conflicting with the system, but I'm not that tech savvy to know for sure...
Thanks in advance if you know what's going on!
Click to expand...
Click to collapse
Hello
Can you please attach some logcats for your problem. Thank you
Grafdude said:
I've flashed v1.14.5 and the "briefing" panel on the homescreen has been replaced by "6thgear TWSwipe"? Is there a setting to have the briefing panel instead?
Click to expand...
Click to collapse
Yes by using stock launcher
Sent from my SuperMan powered SM-G930F

Anyone who installed TWRP and rooted on Marshmallow able to update to Nougat?

If so, how? Thanks!
magicmanfk said:
If so, how? Thanks!
Click to expand...
Click to collapse
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
worked for me perfectly
pjcarrmole said:
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Devalorize said:
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Click to expand...
Click to collapse
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Devalorize said:
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Click to expand...
Click to collapse
Magisk has a few modules for it but nothing like Xposed.
I'm going to do a full back up and then see how well ZenUI plays with Substratum as most of the ZenUI Themes are pretty poor and I want an all black theme. I'll let people know how it goes if anyone is interested in using substratum.
---------- Post added at 10:28 AM ---------- Previous post was at 09:32 AM ----------
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
Oh, if you're having trouble getting TWRP to stick don't reboot the system but reboot back into Recovery, by holding the Vol - & Power together and using the Volume buttons to select Recovery.
After this you can then reboot normally.

Welp, I searched, didn't find a relevant answer. XT1625 help wanted.

Bought my phone in Fry's, had stock nougat. Order of events that led to my current predicament:
1. Wanted to root.
2. Installed TWRP, tried pushing supersu without a new kernel, didnt do so systemless.
3. Tried again systemless.
4. ended up in bootloader loop.
5. realized i didnt back up, so i installed this: https://forum.xda-developers.com/general/rooting-roms/real-official-stock-rom-xt1625-xt1642-t3575895
6. Driver on pc no longer recognizes phone to the point of being able to see system storage, and also cannot open TWRP anymore.
7. The link above is MM. I wanted at least Nougat, since, i got used to some features.... like being able to freaking use hands free calling via bluetooth in my cars.
8. I just want to be able to see internal storage again, and access TWRP, so i can install Lineage and get past this horrible nightmare.
You guys are awesome, I am years behind most of you when it comes to these processes, I have to read line by line what to do in these tutorials, I dont even understand half of the acronyms, or understand half of the terms.
Thanks in advance.
P.S. Just to clarify, marshmellow is working.
Wolamute said:
P.S. Just to clarify, marshmellow is working.
Click to expand...
Click to collapse
Yours really doesn't ask you to upgrade to Nougat like 10 times a day? Mine just must be pushy.
First try: Settings > About phone > system updates
If that doesn't work post what build version of MM you are now on. (also on the about phone page)
Wolamute said:
Bought my phone in Fry's, had stock nougat. Order of events that led to my current predicament:
1. Wanted to root.
2. Installed TWRP, tried pushing supersu without a new kernel, didnt do so systemless.
3. Tried again systemless.
4. ended up in bootloader loop.
5. realized i didnt back up, so i installed this: https://forum.xda-developers.com/general/rooting-roms/real-official-stock-rom-xt1625-xt1642-t3575895
6. Driver on pc no longer recognizes phone to the point of being able to see system storage, and also cannot open TWRP anymore.
7. The link above is MM. I wanted at least Nougat, since, i got used to some features.... like being able to freaking use hands free calling via bluetooth in my cars.
8. I just want to be able to see internal storage again, and access TWRP, so i can install Lineage and get past this horrible nightmare.
You guys are awesome, I am years behind most of you when it comes to these processes, I have to read line by line what to do in these tutorials, I dont even understand half of the acronyms, or understand half of the terms.
Thanks in advance.
P.S. Just to clarify, marshmellow is working.
Click to expand...
Click to collapse
Off-topic, kind of, but I'm trying to flash ANY recent version of TWRP on my XT1625. I unlocked the bootloader, but try to flashing twrp in fastboot mode always returns an error: "(bootloader) Image not signed or corrupt"
What twrp version did you use and where can I get it, please.
What twrp version did you use and where can I get it, please.
Click to expand...
Click to collapse
twrp-3.2.1-0-athene.img
from https://twrp.me/motorola/motorolamotogplus2016.html
Did you unlock your bootloader?
fastboot flashing unlock
---------- Post added at 08:16 PM ---------- Previous post was at 07:57 PM ----------
Wolamute said:
P.S. Just to clarify, marshmellow is working.
Click to expand...
Click to collapse
So I went through and fastboot flashed all those files from your link to Motorola support.
It wouldn't let me relock the bootloader with fastboot oem lock
it did lock with fastboot flashing lock
I was able to reboot, now of course with a verification error boot msg
Connected to wifi and it auto-prompted the Nougat ota update.
Just completed the Nougat install currently on build NPJ25.93-14
Maybe you just need to reflash those files from the Motorola site, and connect to wifi for the 700+MB download?
there's another security update to NPJ25.93-14-4 available after you get back to nougat. Good luck
superceege said:
twrp-3.2.1-0-athene.img
from https://twrp.me/motorola/motorolamotogplus2016.html
Did you unlock your bootloader?
---------- Post added at 08:16 PM ---------- Previous post was at 07:57 PM ----------
Click to expand...
Click to collapse
My xt1625 was boot-unlocked, and I was try the same twrp version you mentioned. I continued researching, and found that, despite the error msg, twrp was flashed correctly. I just needed to go to recovery directly from the bootloader screen. Thanks for your help.
superceege said:
Yours really doesn't ask you to upgrade to Nougat like 10 times a day? Mine just must be pushy.
First try: Settings > About phone > system updates
If that doesn't work post what build version of MM you are now on. (also on the about phone page)
Click to expand...
Click to collapse
EDIT : Ok guys i figured out what to do, the phone wasnt being detected with MTP unless i switched it to charge only, then back to MTP, now i have TWRP back on, and will be trying out lineage. Thanks for the input, it helped!
It's like i said, the one in the link, its 6.0.1. , the kernel is 3.10.84-g061c37c
No, it never pushes notifications about updates with this stock rom posted on xdad, and no, i cannot use the menus to prompt a manual update.
Like i said, i can no longer even access TWRP, my recovery screen says no command, which i can bypass by holding power and clicking volume up, then releasing power, but its not TWRP, and i cannot access internal storage to put anything on it anymore.
Wolamute said:
EDIT : Ok guys i figured out what to do, the phone wasnt being detected with MTP unless i switched it to charge only, then back to MTP, now i have TWRP back on, and will be trying out lineage. Thanks for the input, it helped!
It's like i said, the one in the link, its 6.0.1. , the kernel is 3.10.84-g061c37c
No, it never pushes notifications about updates with this stock rom posted on xdad, and no, i cannot use the menus to prompt a manual update.
Like i said, i can no longer even access TWRP, my recovery screen says no command, which i can bypass by holding power and clicking volume up, then releasing power, but its not TWRP, and i cannot access internal storage to put anything on it anymore.
Click to expand...
Click to collapse
Hmm, what 6.0.1. build do you have (if you scroll down to the bottom of Settings>About Phone, there should be an entry for Build Number)? I recall that for US devices you need to be on MPJ24.139-48/49 or MPJ24.139-64 to be eligible for the OTA update to Nougat. Any other different firmware build may not give you an update as the build's not recognised by the update server for your region/software channel.
However, as you flashed the MM firmware onto your device when you previously had Nougat, I would advise against taking the OTA update route. Depending on what version of Nougat you had before you tried to root, you may hard brick your device if you try to flash the OTA, since flashing MM firmware may not downgrade your bootloader, as such you'd be flashing an old OTA onto a newer Nougat bootloader, which is a really bad idea. If you can remember what stock firmware you had (or at least what security patch it was), we can try to locate the correct firmware for you to flash and safely get you back onto the update path.
As for the recovery, that sounds like the stock recovery you have on your device, which if you re-flashed the stock ROM, will replace TWRP. You may have to re-flash TWRP.
On a related note, on Marshmallow, you do not need to flash a custom kernel - you could flash TWRP and your choice of root manager. On stock Nougat (on the G4/Plus devices), you must flash a custom kernel, else you will likely bootloop as you experienced. Here's a rooting guide for G4/Plus Nougat devices: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
---------- Post added at 04:28 AM ---------- Previous post was at 04:23 AM ----------
Baboon_Red said:
Off-topic, kind of, but I'm trying to flash ANY recent version of TWRP on my XT1625. I unlocked the bootloader, but try to flashing twrp in fastboot mode always returns an error: "(bootloader) Image not signed or corrupt"
What twrp version did you use and where can I get it, please.
Click to expand...
Click to collapse
That error is normal, as far as I know - the TWRP image is not cryptographically signed by Motorola, so that message seems to be mainly informational and alerting you that you are flashing unsigned images in fastboot (which you are), since fastboot is mainly used to flash signed images. Once you've flashed TWRP, reboot straight to recovery to ensure the TWRP is not overwritten by the stock recovery. Afterwards, you can boot as normal.
Be careful to flash the TWRP version/architecture for what you want to do - e.g. if you wish to flash 64 bit custom ROMs, you must use a 64 bit TWRP version. Attempting to flash 64 bit custom ROMs via 32 bit TWRP may give you an error 255 otherwise.

TWRP for P580 running Oreo?

Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Latest twrp dose not worked on my device but this solution work fine
I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse
If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.
Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.
We should ask a dev to update twrp for android 8.1
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode
Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.
On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?
I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen

LG V20 H910 Unlocked phone, rooted and updated to 8.0.0 but issues?

I have the h910 which is unlocked (i put a tmobile simcard in initially, which is actually prepaid).. i tried the ota check for updates to get it beyond android 7, it says no update available. I had wifi enabled and connected.
I figured the issue is that its a tmobile prepaid issue, since i guess technically the phone is att branded.
So i took my galaxy s8 att sim card and put it in, waited till connected.
Once connected after about 30 mins i tried again, still no updates available?
So i'm at a loss on the OTA portion.
Is there a way to get that working?
If not, which method should i use to force it on, so far i started following the steps on this page:
https://www.getdroidtips.com/lg-v20-android-8-0-oreo/
Which is really only android 8.0 not 8.1.
(I also tried check for updates from the lg bridge, but it throws an error even with mtp enabled on usb).
Thanks in advance
update, i tried the 20F firmware on that page which says us99620f, but i got an invalid kdz message when i tried LGUP to flash it.
LGup says H91010m for the version.
Question on the process for oreo
I have the recovery twrp-3.2.3-0-h910.img installed.
I folllowed the steps and installed:
H910_20h_Oreo_full_rooted.zip and added zips for H910_v1.0-mk2000.zip and what i thought i needed, SR5-SuperSU-v2.78-SR5-20161130091551.zip but now realize supersu is outdated, so at this point only mk2000 is on there.
The phone appears to be up to date and on oreo. Initially the free root checker seemed to say it wasnt rooted, but on second run it show it is.
I tried to run magisk manager but it says unfortunately magisk manager has stopped.(edit possibly related to the fact i didnt add any magisk 17.2 as a zip to flash, actually unsure where this file is located? can i do this now after the fact or does it matter)?
So at this point i think i missed something, maybe not fully rooted?
Questions are: does it matter if its not rooted? Will certain oreo features not work? Or, is this some isolated issue with just the manager not wanting to run?
The OS shows 8.0.0 (so i guess not 8.1), software version h91020h *i also tried to do volume up plus power did the factory wipe, but the twrp menu no longer appears, it just formats things back to stock 8.0 welcome
markm75 said:
Question on the process for oreo
H910_20h_Oreo_full_rooted.zip and added zips for H910_v1.0-mk2000.zip and what i thought i needed, SR5-SuperSU-v2.78-SR5-20161130091551.zip but now realize supersu is outdated, so at this point only mk2000 is on there.
Click to expand...
Click to collapse
The system is pre-rooted but as they said, you can still flash the Magisk image.
markm75 said:
I tried to run magisk manager but it says unfortunately magisk manager has stopped.(edit possibly related to the fact i didnt add any magisk 17.2 as a zip to flash, actually unsure where this file is located? can i do this now after the fact or does it matter)?
So at this point i think i missed something, maybe not fully rooted?
Click to expand...
Click to collapse
As for me, I installed Magisk from the image I downloaded here magiskmanager[.]com
The OS shows 8.0.0 (so i guess not 8.1), software version h91020h *i also tried to do volume up plus power did the factory wipe, but the twrp menu no longer appears, it just formats things back to stock 8.0 welcome
Click to expand...
Click to collapse
In order to get the TWRP back, you'll have to boot in fastboot mode through ADB (adb reboot bootloader) or volume down + plug to PC)
Then you can install the latest version of TWRP on fastboot mode: fastboot flash recovery twrp_image_file_name.img

Categories

Resources