Hii guys, Can anyone recommend the best settings for Matr1x kernel(v9.5), I an on Cyanogen MOD. I am using Trickster MOD app.
I flashed the -cm GPU Overclock edition.
I would like to know the best settings for Sound, Display. I have a FAST binned chip, And i would be happy if any one recommend me the best UV voltages.
Thank You.....
Hey guys,
I want to make a slight underclock and undervolt my new S4 i9505..used to use Voltage Control for my S2 but I think that one's a bit outdated. Which apps do you guys use?
Thirsk said:
Hey guys,
I want to make a slight underclock and undervolt my new S4 i9505..used to use Voltage Control for my S2 but I think that one's a bit outdated. Which apps do you guys use?
Click to expand...
Click to collapse
If you flash perseus kernel you'll get stweaks with it and it's pretty deep level app to o/c u/v...You can do also color calibration and sound enhancements.
http://forum.xda-developers.com/showpost.php?p=41256270&postcount=1
SetCPU for root, is a popular one, but i haven't rooted my S4 yet so i am not sure if it works for it.
Jason2k13 said:
SetCPU for root, is a popular one, but i haven't rooted my S4 yet so i am not sure if it works for it.
Click to expand...
Click to collapse
Had a look at some of the apps, it seems like none currently offer complete support for multicore power saving, like for hotplugging all four cores in the S4. Also i thought Perseus kernel was only for the Octa Core variant I9500?
WARNING: THIS THREAD IS FOR THOSE WHO HAVE CUSTOM KERNELS INSTALLED ON THEIR DEVICES. I AM NOT RESPONSIBLE FOR ANY DAMAGE DEALT TO YOUR PHONE BECAUSE YOU DID NOT READ MY INSTRUCTIONS CORRECTLY.
NOTE: THIS IS NOT A KERNEL THREAD. IT IS A GUIDE FOR YOUR KERNEL SETTINGS FOR IMPROVED PERFORMANCE AND BATTERY LIFE!
Hi there, guys!!! This thread is for users who have custom kernels on their Redmi Note 3.
Here it is:-
CPU:-
CPU Governor - Darkness/Impulse
CPU Minimum Frequency - 96
CPU Hotplug:-
Intelliplug
Profile:Eco
Hysteresis Value:4
Threshold Value:350
Cpu Maximum screen Off Frequency: off
Minimum CPU Online:1
Maximum CPU Online:6
Max Cores Screen Off:1
Defer Sampling:268
Boost Lock Duration:2500ms
Down Lock Duration:2500ms
FShift:1
Thermal:-
Core Control: ON
Temperature Throttle: ON
GPU:-
GPU Governor: msm-adreno-tz(with adrenoboost)
I/O (for battery): FIOPS
I/O (for performance): FIOPS
I.O (for gaming): Deadline
I/O (as daily driver): ROW or ZEN
I/O (heavy multitasking): BFQ
READ AHEAD: 512
Virtual Memory:-
Dirty ratio:20
Dirty background ratio:5
Dirty expire centisecs:200
Min free kbytes:2919
Overcommit ratio:50
Swappiness:60
Vfs cache Pressure:120
Laptop mode:0
Extra free kbytes:6075
ZRAM:510
Hit Thanks if I Helped You!!
Regards,
PoseidonKing
PoseidonKing said:
WARNING: THIS THREAD IS FOR THOSE WHO HAVE CUSTOM KERNELS INSTALLED ON THEIR DEVICES. I AM NOT RESPONSIBLE FOR ANY DAMAGE DEALT TO YOUR PHONE BECAUSE YOU DID NOT READ MY INSTRUCTIONS CORRECTLY.
NOTE: THIS IS NOT A KERNEL THREAD. IT IS A GUIDE FOR YOUR KERNEL SETTINGS FOR IMPROVED PERFORMANCE AND BATTERY LIFE!
Hi there, guys!!! This thread is for users who have custom kernels on their Redmi Note 3.
Here it is:-
CPU:-
CPU Governor-Impulse (Lionheart, pegasus or interactive will also do, but I noticed impulse gives more battery juice than the other two)
CPU Minimum Frequency-96
CPU Hotplug:-
Intelliplug
Profile:Eco
Hysteresis Value:4
Threshold Value:350
Cpu Maximum screen Off Frequency: off
Minimum CPU Online:1
Maximum CPU Online:6
Max Cores Screen Off:1
Defer Sampling:268
Boost Lock Duration:2500ms
Down Lock Duration:2500ms
FShift:1
Thermal:-
Core Control: ON
Temperature Throttle: ON
GPU:-
GPU Governor:Simple_Ondemand
IO:-
Internal:ROW
External:ROW
READ AHEAD:1024
Virtual Memory:-
Dirty ratio:20
Dirty background ratio:5
Dirty expire centisecs:200
Min free kbytes:2919
Overcommit ratio:50
Swappiness:60
Vfs cache Pressure:120
Laptop mode:0
Extra free kbytes:6075
ZRAM:510
Hit Thanks if I Helped You!!
Regards,
PoseidonKing
Click to expand...
Click to collapse
Will try this one....
abhy27 said:
Will try this one....
Click to expand...
Click to collapse
Never quote the entire OP. Just post a reply, I will see it sooner or later.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Can i ask u what kernel do u use for this setting ?
Awesome.
I love reading and tweaking ****. Thanks op
khangcobra said:
Can i ask u what kernel do u use for this setting ?
Click to expand...
Click to collapse
Any custom kernel will do. I haven't unlocked my RN3, I tried these settings on my friend's RN3 with Radon kernel. Phone works like a charm!
Hit Thanks if I Helped You!!
Regards,
PoseidonKing
A Sad Napkin said:
Awesome.
I love reading and tweaking ****. Thanks op
Click to expand...
Click to collapse
Welcome! Do try and report any issues (if any)...
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
CPU Minimum Frequency-96 - i dont understand that
CPU Hotplug - where can i change it?
Thx
bozarjoska said:
CPU Minimum Frequency-96 - i dont understand that
CPU Hotplug - where can i change it?
Thx
Click to expand...
Click to collapse
I think -96 means underclocking. Im not too sure though.
@PoseidonKing
Thanks for the input.
But the question is with what program do you do all that ??
Tested Kernel auditor, Ex kernel auditor.
I would appreciate what program you use.
A greeting.
bozarjoska said:
CPU Minimum Frequency-96 - i dont understand that
CPU Hotplug - where can i change it?
Thx
Click to expand...
Click to collapse
I too have the same question
Sent from my Redmi Note 3 using Tapatalk
PoseidonKing said:
Any custom kernel will do. I haven't unlocked my RN3, I tried these settings on my friend's RN3 with Radon kernel. Phone works like a charm!
Hit Thanks if I Helped You!!
Regards,
PoseidonKing
Click to expand...
Click to collapse
I use radon kernel and android 7 ~ but i cant find cpu hotplug
khangcobra said:
I use radon kernel and android 7 ~ but i cant find cpu hotplug
Click to expand...
Click to collapse
because radon doesn't have any hotplug built in it
@PoseidonKing
Intelliplug is not optimized for big.LITTLE architecture based SOCs!
best governors for both performance and battery are interactive ( or interactive based governors , like : cafactive , Ironactive , Blu_active , ... )
there is no voltage control so we can't apply U.V through any app!
GPU Governor : msm-adreno-tz ( with adrenoboost) is the best option.
fiops is best i o scheduler for performance
http://forum.xda-developers.com/showpost.php?p=59289783&postcount=3
I think zen i/o is better than row ~
bozarjoska said:
CPU Minimum Frequency-96 - i dont understand that
CPU Hotplug - where can i change it?
Thx
Click to expand...
Click to collapse
i only can answer second wuestion , its a specific feature of custom kernel which means it may not available on every custom kernel, depends if the dev make it available or not :laugh:
in case u wanna try hotplugging on rn3, try guyver kernel , its available on our xda section :good:
my personal review guyver is the second best kernel for our rn3 , the first is darkness kernel :good:
Yokohart said:
i only can answer second wuestion , its a specific feature of custom kernel which means it may not available on every custom kernel, depends if the dev make it available or not :laugh:
in case u wanna try hotplugging on rn3, try guyver kernel , its available on our xda section :good:
my personal review guyver is the second best kernel for our rn3 , the first is darkness kernel :good:
Click to expand...
Click to collapse
I think guyver is the best. Much option. Hotplug,governor,i/o. But,its my opinion. Depends on people which one is best.
tansy said:
@PoseidonKing
Thanks for the input.
But the question is with what program do you do all that ??
Tested Kernel auditor, Ex kernel auditor.
I would appreciate what program you use.
A greeting.
Click to expand...
Click to collapse
I use trickstermod, but I would recommend Kernel Adiutor.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
khangcobra said:
I use radon kernel and android 7 ~ but i cant find cpu hotplug
Click to expand...
Click to collapse
Radon kernel doesn't have a hotplug..
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
MEGAX91 said:
@PoseidonKing
Intelliplug is not optimized for big.LITTLE architecture based SOCs!
best governors for both performance and battery are interactive ( or interactive based governors , like : cafactive , Ironactive , Blu_active , ... )
there is no voltage control so we can't apply U.V through any app!
GPU Governor : msm-adreno-tz ( with adrenoboost) is the best option.
fiops is best i o scheduler for performance
http://forum.xda-developers.com/showpost.php?p=59289783&postcount=3
Click to expand...
Click to collapse
Thanks for the info! Thread updated.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Hi there !
It seems i cannot easily find an application that might help me to control the Helio X20 of the S7.
I tried several like Kernel Adiutor but they are not able to control the three cpu clusters differently.
I would like to cool down the cpu by limitating the speed.
Do you know a tool for that please ?
Best regards,
Philippe.
I believe you must have a custom kernel if you want to control it.
Sent from my S7 using Tapatalk
Does anyone know if there is any kernel that allows GPU Control for the s8?
Or any developer that can enable gpu control?
Will pay $$$ to whoever can enable gpu control =)
royalbloodvi said:
Does anyone know if there is any kernel that allows GPU Control for the s8?
Or any developer that can enable gpu control?
Will pay $$$ to whoever can enable gpu control =)
Click to expand...
Click to collapse
Check out the MTweaks kernel control app. It's free and the best one for the Galaxy S8, offering full control of the hardware.
I recommend the Xceed kernel that offers OC and delivers very good performance. I scored a crazy 281k on AnTuTu 7 with my Galaxy S8 Plus.
I'm using the BatMan ROM with the Xceed kernel and tweaked the performance with Lspeed.