Hi guys, please I need help, I tried to install LineageOS on my sister's Lg G2 D800 and got it bricked now and when it starts goes to download mode always, if I try to flash TOT fileI got an error at 6% of laf partition, I opened it and short the capacitors, I installed the Qualcomm driver and got 9006 but in disk management only recognize 1 partition, my computer is an old one with Windows XP SP3, I tried SRK Tool but it doesn't work. Please help me what can I do?
Thanks in advance.
Related
I really need help! My D802 cannot boot into recovery. I've tried to install the KDZ files but failed at 49% and 47% all the time. No fastboot either, but I can boot into Download Mode. I tried every single solution in here but no success. However, I need a DLL file for LG FlashTool for the 'G2' The DLL I've tried is callled LGD802_20130912_LGFLASHv160.dll and LGD802SVC_20130927_LGFLASHv160.dll but they don't work for my G2 which is a UK Open D802.
Someone PLEASE HELP ME!!!!!!!!!! It's been bricked for the past 3 weeks waiting for a damn answer here!:crying:
Anyone?:crying:
Ubuntu does not recognise my G2. However, Windows does only when the phone is in Download mode. ADB does not recognise phone either. I have latest drivers installed.
...
hello
today i bricked my phone and i don't know what to do
first i was in cloudy g3 and i wipe the internal storage
then i want to back to the stock firmware with lg flash tool but i stuck in fastboot with lg logo
then i try this thread : http://forum.xda-developers.com/showthread.php?t=2582142
and i use D802 files for my vs980 :crying::crying:
then the phone power off but when i plugged in my pc, the phone detected as qhsusb_bulk in device manager
but without logo, no download mode,... anything
and i don't know what to do please help me :crying::crying::crying:
any help would be appreciated
My LG G2 d802 is stuck in the download mode and has no recovery. It happened when i flashed Miui 6 by gtbluesky after full wipe of data and system. Previously it was on cloudy 3.2 . After flashing the miui it wont boot and is in a bootloop on mi bootscreen. I tried but cannot boot into recovery seems like it doesnt have a recovery.
However, I can boot into download mode but it is not recognised in ADB nor Lg flash tool. I tried flashing kdz with the lg flash tool but it wont detect the device. I tried installing various drivers to the pc and also tried two different pc with windows 7. However, adb wont detect the device.
Regarding the drivers, the windows installs all the drivers but fails to install the LGE Androidnet usb modem drivers. If i manually try to install it from the lg drivers, it would keep installing and returns an error of timeout period expired.
So, i am stuck in the download mode with a bricked device.
If Someone could help me with this problem, i'll be much obliged. Thanks
SOLVED
[SOLVED] I downloaded the .tot file for my phone and extracted .dll from one of the .kdz & flashed it using the lg flash tool . It flashed good and now my g2 is up and running. :good:
Hello,
Yesterday I have bricked my phone, he won't turn on and when I plug the usb cable I have a bluescreen. (D802)
So I tried to short the capacitor and it work ! But I have a problem, I'm stuck in HS-USB QDLoader 9008 mode, I tried this topic :
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830
But i can't find the tot file for my firmware, I think I do this 1 month ago :
Put lollipop v30b (FRANCE OPEN)--> flash kk_baseband --> flash cloudyG2 2.2 but what tot (or bin) file I need to take ?
Other thing I do but I don't remember : 20A kitkat 4.4.2 (SFR FRANCE) --> flash cloudy g2 2.2.
So i don't know what file I need to take... If you can help me, do it thanks !
After a big research I can have 9006 and 9008 mode.
With 9008, I've flashed all partitions. Nothing (no download mode and can't power ON the phone)
With 9006 window pop on Windows (7 64 bits) with "would you like to format......", but I have 500+ popup window.
So it's impossible to use SKR Tool, and when I go in disk utility Windows restart to popup window.
I tried the solution with Linux, but when I do the command ls /dev/sd* I don't have 36 partitions...
Hello Guys, I have LG G2 F320S (Korean Variant) and a few days ago it was stuck in fastboot mode while i was trying to upgrade to Lollipop firmware using LG Flash Tool 2014. And Fastboot commands were working fine but the problem was that some of the partitions had become write-protected so I was unable to erase or reflash those partitions. So, I short circuit the capacitor and I successfully entered Qualcomm 9006 mode with a number of partitions. I used SRKtool to restore partitions (I have this experience in the past so it was easy for me) but here I noticed 1 or 2 partitions were not restored (write-protected) but phone restarted to download mode. When I tried to flash stock firmware then it always stuck in the middle or something and later once again I was stuck in fastmode mode where I started.
I don't know how partitions became write-protected?
Once again I disassembled the cellphone and short-circuit the capacitor to enter Qualcomm 9006 mode and this time, I wanted to remove write-protection from these partitions so I opened "Diskpart" in "cmd" selected LG G2 and performed clean command and format it. Diskpart removed all the partitions gave me a 32GB single partition like a USB Flash. :laugh:
I thought may be after shorting the capacitor, I will get back partitions but this time I got QDLoader 9008 mode. Now whenever I connect phone to PC with or without battery then it is detected in Qualcomm QDloader 9008 mode.
I tried Boarddiag v3.99c but unfortunately this tool doesn't extract .kdz file of my LG G2 F320S korean variant. I tried to extract .tot file of LG G2 D802 (intl variant) and it completed successfully, so the problem is in .kdz file of my cellphone(probably not supported by this tool).
I can extract this .kdz using LGFirmware extract tool but unfortunately it doesn't create "partition.txt" file which is required in boarddiag to flash partitions. I used partition.txt file of LG G2 D802 but it gives error : No DLoad mode when trying to reflash programmer".
Any help would be appreciated.
#StayHomeStaySafe
Boarddiag full and working version helped
I have tried a lot of times to flash the partitions using boarddiag but it failed. It was the problem of the software because almost all versions had missing files. At last, I have found a working version of boarddiag which detects my phone and I am able to flash boot partitions to it. Although all 3 tests completed successfully (AP, EMMC, SDRAM) but still I am stucked, even after flashing all the boot images, I am still stuck in QDLoader 9008 mode and whenever I connect it to PC (with or without battery), it is detected in QDLoader 9008 mode.
Here is the link to the full working version of Boarddiag 3.99 for LG G2:
https://mega.nz/#!SwY2BQ6L!kPZ6s24hdaVj1x5grboFlAksHSwmItblXIcJCCSaeaw
(mega is blocked in many countries so you may have to use proxy/vpn to open this link)
Here is the result of all 3 tests. Please tell me whats the problem. SDRAM result is FAIL but why so?
https://ibb.co/6ntQwsv
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
salmanzafar said:
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
Click to expand...
Click to collapse
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
rootarded said:
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
Click to expand...
Click to collapse
Dear I have tried two methods. I tried LGUP and LG Flash Tools 2014. But both fails. Unfortunately, no TOT file is available for my LG G2 because its Korean variant (F320S) and it has only .kdz firmwares available.
QDLoader 9008 mode
Now, my phone is not entering download mode. It is displayed as QDLoader 9008 mode when connected to PC. Check the screenshot here : https://ibb.co/yk3VSbS
I have the working version of boarddiag but sometimes it passes all 3 tests and sometimes fails EMMC test ad sometimes SDRAM test is not completed successfully.