After fixed the problem with "ale-l21 not recognized by adb", now I got bigger problems. Flashed twrp again, flashed EMUI 4.1, everything good, after updating apps and stuff downloaded ESAL V.2.2 and I was ready to flash TWRP again and flash the kernel, when.... tried MASHING Power and Vol down, and NOTHING!!! No bootloader! No Rescue Mode!!!!!!!!! **** fuk fuk fuk fsjcfioscponDCNSCNSINCOSNCPINSINASKNSBbPIBASNCSNCNin
Someone can help me, again?
Thanks
Did you have your phone connected to pc?
If it doesn't work write on adb "Adb reboot bootloader"
Vika__ said:
Did you have your phone connected to pc?
If it doesn't work write on adb "Adb reboot bootloader"
Click to expand...
Click to collapse
From EMUI?
XTutorials said:
From EMUI?
Click to expand...
Click to collapse
Yes. And if you have linux then "Sudo adb reboot bootloader"
Vika__ said:
Yes. And if you have linux then "Sudo adb reboot bootloader"
Click to expand...
Click to collapse
Well, kinda works. Flashed twrp, but when trying to boot in it by holding vol+ and vol - it just goes into update restore or something.
XTutorials said:
Well, kinda works. Flashed twrp, but when trying to boot in it by holding vol+ and vol - it just goes into update restore or something.
Click to expand...
Click to collapse
Actually, never mind. BUT, now the device boots in recovery by just pressing "vol up"
Related
So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Xil0s said:
So, my phone is stuck at huawei's logo...
I can't enter fastboot mode with the buttons, and when i want to do with the cmd, "device not found" ... So, I can't flash the .img
I tried to put a dload file on a sdcard and press volume up and down with the power button but nothing happens.
I really don't know what to do, PLEASE HELP ME !!
THANKS
Click to expand...
Click to collapse
You need to wait 20 minutes after updating from sdcard.
Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
k i'll try again
Suleiman01 said:
You need to wait 20 minutes after updating from sdcard.
Click to expand...
Click to collapse
Don't work ;(
Xil0s said:
Don't work ;(
Click to expand...
Click to collapse
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Suleiman01 said:
Do you have twrp or the Huawei recovery? By the way did you try fastboot commands? Not adb. Both are different things.
Click to expand...
Click to collapse
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Xil0s said:
I tried fastboot commands too... So I haven't any access to my phone by my computer. Btw, what are TWRP and Huawei recovery ? Does it helps if i don't have access to my phone ?
Thanks.
Click to expand...
Click to collapse
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Suleiman01 said:
Did you flash any custom recovery on your phone? TWRP (team win recovery project). What happens when you get in fastboot boot and rescue mode? Black screen? Does your phone charges if you connect It to charger? If yes then it is good news.
Click to expand...
Click to collapse
I can't get into fastboot and rescue mode but when I plug it into the compute, it charges. I didn't flashed any custom recovery :/
I was flashing the MM zip file that was provided with TWRP but when the phone restarted it just got stuck on the logo (not the lg one). Can anyone help me?
RazorMKD said:
I was flashing the MM zip file that was provided with TWRP but when the phone restarted it just got stuck on the logo (not the lg one). Can anyone help me?
Click to expand...
Click to collapse
Did you wipe data before that ?
mayankjet said:
Did you wipe data before that ?
Click to expand...
Click to collapse
I made a mistake by flashing the SuperSU zip without booting into the system first. Can you tell me how to boot into recovery with the hardware buttons ?
Turn off your device then hold down power off + volume down button when you see lg logo release the power button for a second while keeping the volume down button pressed then press and hold down power button again with the volume down pressed. Your phone should boot up into factory reset menu click yes to factory reset. Don't worry click yes to factory reset. It will boot into twrp.
NOTE:- It will only work if you have latest twrp build installed, won't work, if you have first build installed.
mayankjet said:
Turn off your device then hold down power off + volume down button when you see lg logo release the power button for a second while keeping the volume down button pressed then press and hold down power button again with the volume down pressed. Your phone should boot up into factory reset menu click yes to factory reset. Don't worry click yes to factory reset. It will boot into twrp.
NOTE:- It will only work if you have latest twrp build installed, won't work, if you have first build installed.
Click to expand...
Click to collapse
If you still have the first build, you can still enter the recovery by adb with "adb reboot recovery" while the factory reset scrip of the twrp runs. It won't be immediate, you'll probably lose your data but it will work
---------- Post added at 07:18 PM ---------- Previous post was at 07:15 PM ----------
RazorMKD said:
I made a mistake by flashing the SuperSU zip without booting into the system first. Can you tell me how to boot into recovery with the hardware buttons ?
Click to expand...
Click to collapse
You need to use at least SuperSU 2.79, previous versions won't boot and will get stuck al LG logo.:good:
[Happened to me >.<' ]
The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.
RazorMKD said:
The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.
Click to expand...
Click to collapse
Similar thing happened to @MadjijaHacker
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71338313
but, then, he managed to get solved it:
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71339075
You can ask him how did it.
walterfuster said:
Similar thing happened to @MadjijaHacker
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71338313
but, then, he managed to get solved it:
https://forum.xda-developers.com/lg...e-poland-v20b-stock-rom-t3565676/post71339075
You can ask him how did it.
Click to expand...
Click to collapse
I just falshed wrong zip, i flashed rom template, not actual rom
Sent from my LG-H440 using Tapatalk
RazorMKD said:
The problem is I can't start my phone at all. Can't get adb because I can't boot up the system. When I go to recovery TWRP just does something and reboots to the system where it gets stuck again.
Click to expand...
Click to collapse
That "something" that twrp does is probably the factory reset scrip, so you have to keep the phone plug and adb running so while it's doing "that something" use "adb reboot recovery" command
69PerTTu69 said:
That "something" that twrp does is probably the factory reset scrip, so you have to keep the phone plug and adb running so while it's doing "that something" use "adb reboot recovery" command
Click to expand...
Click to collapse
Just tried that and still no success, adb doesn't even register the device while the script is running.
RazorMKD said:
Just tried that and still no success, adb doesn't even register the device while the script is running.
Click to expand...
Click to collapse
Only option left is Download Mode and flash .kdz again.
Take out batery, plug the phone and put the battery on while pressing vol+
By the way, which SuperSu version did you use?
69PerTTu69 said:
Only option left is Download Mode and flash .kdz again.
Take out batery, plug the phone and put the battery on while pressing vol+
By the way, which SuperSu version did you use?
Click to expand...
Click to collapse
I used SuperSU v2.79
[Edit] By the way which tool do I use to flash the old kdz ?
RazorMKD said:
I used SuperSU v2.79
Click to expand...
Click to collapse
I really don't know what happened then. I flashed SuperSU and MM altogether several times (Trying to fix another problem) and I never had a problem.
But well, as long as you have Download Mode you can always start from scratch
69PerTTu69 said:
I really don't know what happened then. I flashed SuperSU and MM altogether several times (Trying to fix another problem) and I never had a problem.
But well, as long as you have Download Mode you can always start from scratch
Click to expand...
Click to collapse
I did that trice trying to fix my problem, 3rd time i figured my mistake
Sent from my LG-H440 using Tapatalk
RazorMKD said:
I used SuperSU v2.79
[Edit] By the way which tool do I use to flash the old kdz ?
Click to expand...
Click to collapse
LG Flash Tool 2014
Remember, without battery plug it to the computer, press Vol+ and then put the battery. It'll show you a message telling you to keep de Vol+ until the "Download Mode" screen appears
Goodluck!:good:
Ok so I got everything back to normal thanks to you guys. But I have a question. I found that there are 2 aboot.bin files in the system. One is in dev/block/bootdevice and one is in dev/block/platform. So do I run the command twice for both or do I do just one ?
RazorMKD said:
Ok so I got everything back to normal thanks to you guys. But I have a question. I found that there are 2 aboot.bin files in the system. One is in dev/block/bootdevice and one is in dev/block/platform. So do I run the command twice for both or do I do just one ?
Click to expand...
Click to collapse
These are the same. Just do
Code:
dd if=/sdcard/aboot_v10f.bin of=/dev/block/mmcblk0p5
assuming aboot_v10f.bin (the patched aboot) is on the root of internal storage.
Thank you very much to everyone that helped. Everything worked perfectly. Had some problems with the official TWRP app so I used Flashify to flash the recovery. For now I am going to use the v10f rom until there is a custom one ( hope we get LineageOS soon ).
Add [SOLVED ]the post title too!
Glad we were useful!
Please Help me...
I have already tried everything possible.
P8 lite only starts in the fastboot mode.
Error
Func NO : 9 (dsp image)
Error NO : 1 (security verify failed ! )
sorry for my english
Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.
Botar230 said:
Flash stock UPDATE.APP by putting it in the dload folder on the sd card and then holding vol- vol+ and power button to force the update.
Click to expand...
Click to collapse
not working.....
i flash system,cust,recovery,userdata,boot in fastboot
fastboot say Ok..
i flash dsp image, fastboot says error
phone starts only in rescue mode with
func no : 9 dsp image
error no : 1 security verify failed
or Fastboot mode
HELP me Please
and sorry for my english
BigH187 said:
not working.....
Click to expand...
Click to collapse
Can you give more details of how it is not working? Like does it even start to prepare update?
keikari said:
Can you give more details of how it is not working? Like does it even start to prepare update?
Click to expand...
Click to collapse
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
BigH187 said:
I flash all images with fastboot (many roms) fastboot say OK
cant enter Recovery or eRecovery.
push the power button, phone start in rescue mode.
nothing works ,only rescue mode and fastboot mode.
Click to expand...
Click to collapse
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs
Botar230 said:
If your phone still boots in rescue mode, then I think the rom you've flashed is not compatible with your phone. As @up said, try to force an update.
Sent from my LG-K220 using XDA Labs
Click to expand...
Click to collapse
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help
BigH187 said:
The only keyboard shortcut that works is v - and power for fastboot mode.
Ok ... and what could be the right rom?
The last Rom that worked was the slimrom Marshmallow for Ale-L21.
I believe singel sim
Thanks for help
Click to expand...
Click to collapse
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!
(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: The phone is loaded in mode always, after 3 buttons it is launched in the rescue mode, in recovery - the same problem! I ask to help or assist as it to correct!
Click to expand...
Click to collapse
Try this:
Botar230 said:
I came up with the following solution:
1. Flash TWRP (fastboot flash recovery <path>.img)
2. Type fastboot reboot and then unplug the usb cable as fast as you can and hold vol+ to boot into twrp.
3. Wipe -> Swipe to Factory Reset
4. Wipe -> Format Data
5. Download B896_update.zip
6. Advanced -> ADB Sideload -> Swipe to Start Sideload
7. adb sideload <path_to_b896>.zip
8. Once the process is finished, reboot the phone.
Click to expand...
Click to collapse
(...The-PhoenixX...) said:
Hello, I have the same problem! I'll tell you in detail: the phone starts only in rescue mode ...
Nowhere to go just into the fast boot mode, please help me how to fix it!
Click to expand...
Click to collapse
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
Botar230 said:
Try this:
Click to expand...
Click to collapse
The problem is that in the recovery does not come
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
keikari said:
It should still be able to do force update or at least fail to do it. Make sure you have like >70% battery. Put UPDATE.APP in folder named dload in your sd-card and hold 'vol -, vol + and power.'
Click to expand...
Click to collapse
keikari said:
What were you trying to do when problem started. It probably won't do anything at your state, but have you tried to hold vol+ in fastboot mode, normally it should go to eRecovery.(not that you can do anything with it, but would be good to know)
Also try things with usb cable plugged and un-plugged this really makes difference in some cases.
Click to expand...
Click to collapse
I uninstalled the firmware before the problem happened!
the loader is unlocked
(...The-PhoenixX...) said:
The problem is that in the recovery does not come
Click to expand...
Click to collapse
The recovery does not come? What do you mean?
My solution works only on P8 lite 2015 (that's the op's phone model).
(...The-PhoenixX...) said:
I uninstalled the firmware before the problem happened!
the loader is unlocked
Click to expand...
Click to collapse
How exactly you did it? That should never be necessary or good idea to do.(Unless you are only wiping partitions in recovery.)
Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?
BigH187 said:
Hey ... I've tried everything here and in other forums. No matter what I tried I can only boot the fastboot mode.
What the hell is actually a dsp.img?
Click to expand...
Click to collapse
I also have this problem
I got this error trying to change my data to f2fs and install MorfuZ V3.4
spend all afternoon without finding solutions
dload in microsd don't work i try with 4 firmwares
any help please?:crying:
...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21
EgonsS said:
...i try to flash ROM_MORFUZ_3.4_EMUI8_HONOR8LITE_BY_CATUVA21.ZIP
...now Can't recovery, can't fastboot...
Huawei Multi Tool don't runs
Huawei P8 lite ALE L21
Click to expand...
Click to collapse
The rom you've flashed is not compatible with P8 lite 2015. Unfortunately, you've probably hardbricked your phone - there is no way to fix it.
So I flashed the stock pie rom from this forum, came from pixel experience 9. After I flashed the ROM I also flashed the twrp installer and when I rebooted it says the system has been destroyed and press the power button to shut down. I can boot the phone in fastboot but it doesn't recognise it even though the drivers are installed and it worked perfectly before. The miflash program also doesn't recognise anything after I press refresh.
Is there anything I can do?
Boot into TWRP (by booting not flashing) and get a flashable rom with twrp for ex. https://forum.xda-developers.com/mi-a1/development/twrp-stock-8-1-0-t3856328
emiljano539 said:
Boot into TWRP (by booting not flashing) and get a flashable rom with twrp for ex. https://forum.xda-developers.com/mi-a1/development/twrp-stock-8-1-0-t3856328
Click to expand...
Click to collapse
I can't boot into recovery, the error message pops up on the screen
lvnatic said:
I can't boot into recovery, the error message pops up on the screen
Click to expand...
Click to collapse
You have to boot to twrp from the bootloder screen.
Use this recovery to boot from pc and never Flash twrp on pie.
https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637
lvnatic said:
So I flashed the stock pie rom from this forum, came from pixel experience 9. After I flashed the ROM I also flashed the twrp installer and when I rebooted it says the system has been destroyed and press the power button to shut down. I can boot the phone in fastboot but it doesn't recognise it even though the drivers are installed and it worked perfectly before. The miflash program also doesn't recognise anything after I press refresh.
Is there anything I can do?
Click to expand...
Click to collapse
Again unlock boot loader.
lvnatic said:
I can't boot into recovery, the error message pops up on the screen
Click to expand...
Click to collapse
As others set go into fastboot then use this command "fastboot boot TheNameOfTWRP.img"
emiljano539 said:
As others set go into fastboot then use this command "fastboot boot TheNameOfTWRP.img"
Click to expand...
Click to collapse
I tried that and fastboot doesnt recognise my device at all. When I simply type fastboot the device should appear with a code, wll when I type it nothing happes.
lvnatic said:
I tried that and fastboot doesnt recognise my device at all. When I simply type fastboot the device should appear with a code, wll when I type it nothing happes.
Click to expand...
Click to collapse
Strange. Do you have installed drivers/do you have used before adb in ur pc with mi a1?
emiljano539 said:
Strange. Do you have installed drivers/do you have used before adb in ur pc with mi a1?
Click to expand...
Click to collapse
Yes, I also have a redmi note 5 Pro and a mipad 4 and both work well with ADB.
Try flashint stock on EDL mode.
Same error with me today. Tried to restart 5 times. Its unbelievable but the fix was very easy. Just run "fastboot continue" and wait for 2 minutes for a working reboot!
Thanks for the Solution
Inferi0r said:
Same error with me today. Tried to restart 5 times. Its unbelievable but the fix was very easy. Just run "fastboot continue" and wait for 2 minutes for a working reboot!
Click to expand...
Click to collapse
Thanks for the solution. Worked for me as well for similar problem. A simplified step by step if anyone still couldn't get it to work.
Power off your phone as asked by the Error Message
Press Volume Down + Power button simultaneously to boot into fastboot.
Load Command Prompt in the ADB/Fastboot folder in your PC (ADB and other drivers need to be installed)
Type "fastboot continue" and press enter
And you are done. If your phone is not recognized by the PC (after you put it to fastboot mode) make sure you have proper Drivers installed for your devices. You can use MiFlashTools to install required drivers automatically.
yagya said:
Thanks for the solution. Worked for me as well for similar problem. A simplified step by step if anyone still couldn't get it to work.
Power off your phone as asked by the Error Message
Press Volume Down + Power button simultaneously to boot into fastboot.
Load Command Prompt in the ADB/Fastboot folder in your PC (ADB and other drivers need to be installed)
Type "fastboot continue" and press enter
And you are done. If your phone is not recognized by the PC (after you put it to fastboot mode) make sure you have proper Drivers installed for your devices. You can use MiFlashTools to install required drivers automatically.
Click to expand...
Click to collapse
Thanks for this. This happened to me two weeks ago, had to completely flash stock rom and begin from zero. Hopefully others will see this and avoid starting fresh.
Actually I tried flashing the twrp image file. And it also shows success in the CMD prompt. But then my phone freezes on the Fastboot Mode screen and the TWRP doesn't show up. Then I have to press the Vol + and Vol - Keys along with the Power Button to boot it up again normally try helping me out.
i had the same problem
do you have android 10?
Install twrp through magisk
try this, root without twrp, it worked for me
TWRP dont support Android 10
Twrp works normally on Android 10.
Aaditya66 said:
Actually I tried flashing the twrp image file. And it also shows success in the CMD prompt. But then my phone freezes on the Fastboot Mode screen and the TWRP doesn't show up. Then I have to press the Vol + and Vol - Keys along with the Power Button to boot it up again normally try helping me out.
Click to expand...
Click to collapse
Same happened to me. It saved me
https://oneplus.gadgethacks.com/how-to/unbrick-your-oneplus-6t-when-all-else-fails-0191272/
vicary said:
i had the same problem
do you have android 10?
Click to expand...
Click to collapse
Yes updated it to 10.3.1
zubairshimon said:
Same happened to me. It saved me
https://oneplus.gadgethacks.com/how-to/unbrick-your-oneplus-6t-when-all-else-fails-0191272/
Click to expand...
Click to collapse
If I hold the combination of the keys the phone starts that's not an issue.
vicary said:
try this, root without twrp, it worked for me
TWRP dont support Android 10
Click to expand...
Click to collapse
Tried installing Root with the help of Magisk App but then the wifi breaks