Related
I just installed MIUI 7 ROM on my Lenovo A6k . First I wiped everything then I installed the patch and then the ROM . everything works fine but I couldn't install the gapps but when I open rom I see everything fine. And all gapps are there but I can't install anything from play store or my sdcard it says app not installed. Pls help
Exactly the same issue i am facing.
Tried wiping dalvik cache ,flashing rom and patch many times.
Can anyone help?
This rom is my first love.
ShakuniMama said:
I just installed MIUI 7 ROM on my Lenovo A6k . First I wiped everything then I installed the patch and then the ROM . everything works fine but I couldn't install the gapps but when I open rom I see everything fine. And all gapps are there but I can't install anything from play store or my sdcard it says app not installed. Pls help
Click to expand...
Click to collapse
1. Install xposed framework from recovery.
2. Enable all module in xposed installer app.
3. Reboot / soft reboot
If you want MIUI 7 so bad. Use MIUI 7 KK. It's same with LP version. But KK use dalvik runtime and LP use ART.
you can use MoStock kernel to MIUI 7 KK. No bug
Issue fixed, all things are working fine .Started loving this rom.
But there is one problem .4G is not working. But internet is working fine.
Any fix for that?
Ok i got it !! I was using third party gapps. SO first flash the gapps given in the thread and then the xposed in the thread and then done ! It now fine but a lil bit laggy
i installed miui 7 in a6000 .
it is working fine.
now iam unable to flash other Roms.
unable to remove miui logo i tried to remove bootanimation.zip but its not working.
any solution
Besant George said:
i installed miui 7 in a6000 .
it is working fine.
now iam unable to flash other Roms.
unable to remove miui logo i tried to remove bootanimation.zip but its not working.
any solution
Click to expand...
Click to collapse
Use es explorer for that. And go to options>>tools>>root manager>>switch it on and then click on it>>Mount R/W>>select "/system and /" or any other.
Then go to /system/media/ and replace bootanimation.zip
I just installed the new Phantoms kernel. I flashed it and wiped Dalvik and Cache but forgot to install WiFi bug zip. So I did that but now I can't play a video on YouTube. It shows unable to play video and no sound comes from my phone. Pls help.
Which ROM are u using
As many ROM s are not having required audio modules so a installing a new kernel will lead to no audio problem.
Solution is to dirty flash Ur ROM or go for a clean install I prefer clean install........
Hello everyone.
So like many I was using Magisk for root purposes on my device, more specifically v12.
It was working flawlessly until now, only thing was that Google updated their safety and safetynet would fail for a couple of weeks but I didn't mind much.
I got a notification last night that v13.1 is out and I tapped on it and tapped download and install now.
I did just that, rebooted the device and to my surprise Magisk had stopped working.
Once I entered the manager app the app would force close, i tried multiple times opening it and the result was the same.
I tried flashing the uninstaller and the un-su zip and flashed v13.1 again but the same thing happened.
I tried clearing cache and dalvik cache but it didn't help.
I even tried going back to v12 but to my surprise again v12 was force closing too!
I ended up flashing the trusted old SuperSU but I really need magisk for some modules I use.
I searched the magisk subforum but couldn't find anything that fixed it for me.
Had anyone had the same experience?
Is magisk v13.1 working for you?
How did you update? (if you were running v12)
EDIT:
Thanks to @seko85, anyone who had this issue disable all substratum themes and also do this:
1. Wipe dalvik cache, cache and system
2. Install the ROM I was using (RR)
3. Install Magisk 13.1
4. Install Gapps
5. Install kernel
6. Reboot to system
7. Install all modules I was using (deep buffer remover and viper for android by ahrion)
Clear Data from Settings - Apps - Magisk Manager.
mobidor said:
Clear Data from Settings - Apps - Magisk Manager.
Click to expand...
Click to collapse
I did that, enabled any permissions required as well.
Are you using v13.1?
If you're on B25, MagiskSU force closes when allowing a "new" app root, so that could be behind the crashes
Make sure that you have the latest version of magisk manager installed. Since the app got removed from the playstore you have to update manually.
Cyb3rzombi3 said:
Make sure that you have the latest version of magisk manager installed. Since the app got removed from the playstore you have to update manually.
Click to expand...
Click to collapse
I did yeah, the latest version is 5.0.4?
Yeah got 5.0.4 as well and latest magisk is running fine.
If that is not the problem then I don't know what else it could be
Which rom do you have installed?
nfsmw_gr said:
I did that, enabled any permissions required as well.
Are you using v13.1?
Click to expand...
Click to collapse
Yes, and no problem. Installed with TWRP.
nfsmw_gr said:
Hello everyone.
So like many I was using Magisk for root purposes on my device, more specifically v12.
It was working flawlessly until now, only thing was that Google updated their safety and safetynet would fail for a couple of weeks but I didn't mind much.
I got a notification last night that v13.1 is out and I tapped on it and tapped download and install now.
I did just that, rebooted the device and to my surprise Magisk had stopped working.
Once I entered the manager app the app would force close, i tried multiple times opening it and the result was the same.
I tried flashing the uninstaller and the un-su zip and flashed v13.1 again but the same thing happened.
I tried clearing cache and dalvik cache but it didn't help.
I even tried going back to v12 but to my surprise again v12 was force closing too!
I ended up flashing the trusted old SuperSU but I really need magisk for some modules I use.
I searched the magisk subforum but couldn't find anything that fixed it for me.
Had anyone had the same experience?
Is magisk v13.1 working for you?
How did you update? (if you were running v12)
Click to expand...
Click to collapse
I had the same situation. The solution was:
1. Wipe dalvik cache, cache and system
2. Install the ROM I was using (RR)
3. Install Magisk 13.1
4. Install Gapps
5. Install kernel
6. Reboot to system
7. Install all modules I was using (deep buffer remover and viper for android by ahrion)
Root is working and passed safety net. Unfortunately I couldn't manage to run Dolby Lee Pro 3 by ahrion and I suppose that also war mod is not working (post data script is not working, using Magisk v12 I saw in Magisk log that war mod was executed now with Magisk v13.1 I don't see such message).
seko85 said:
I had the same situation. The solution was:
1. Wipe dalvik cache, cache and system
2. Install the ROM I was using (RR)
3. Install Magisk 13.1
4. Install Gapps
5. Install kernel
6. Reboot to system
7. Install all modules I was using (deep buffer remover and viper for android by ahrion)
Root is working and passed safety net. Unfortunately I couldn't manage to run Dolby Lee Pro 3 by ahrion and I suppose that also war mod is not working (post data script is not working, using Magisk v12 I saw in Magisk log that war mod was executed now with Magisk v13.1 I don't see such message).
Click to expand...
Click to collapse
Alright that advice step by step was great!
Gonna try this once I get home and post back, thanks man!
Update, thanks to @seko85 and disabling any substratum theme (dunno which made it work, could be both together as well) I managed to fix the issue.
Magisk v13.1 is up and running.
Also thanks to everyone who replied.
Peace, out.
Hi you there,
I start this thread because I´m having some issues installing 8.0 and 8.1 Oreo Roms, every of them have the same problems when I try to install them in my device (REDMI 3X). Actually, I have install and running Resurrection Remix Nougat + Gapps Micro, and it works fine.
When I try to install some Oreo Rom, I have these 2 possible options:
1 - I install rom + gapps (no matter which one, cause I tried each one): phone restarts and stucks at logo and after maybe 30 minutes I must restart it manually and reinstall a nougat rom. It never starts, and it is f...ng annoying.
2 - I install rom, afterwards, I restart and it works fine, but I have no gapps. The I boot into recovery and after gapps are installed I restart the phone, then gapps never work.
Please, I just get 2 times an oreo rom working, but now they never work, I don´t know whta to do. I also tried different recoveries, flashing them from PC, installing them from .img with TWRP, nothing seems to work. As I said: F...NG ANNOYING. I need heeeeeeeeeeeeeeeeelp
I think I am not the only one with this problem, if anyone can help I will appreciate that.
Thansk in advance.
First of all, this should be in the Q&A section. Secondly, I can help you. I'm sure that you downloaded the gapps from the cloudkenzo something, right? Yeah those gapps do not have any issues, instead they make an issue. After flashing your rom and then these gapps file, the system partition normally unmounts. But usually when you boot into the ROM, the partition should re-mount. These unofficial gapps causes some issues with that. A simple solution- Just mount system in twrp, now reboot to system and you should be fine. I faced the same issue and this is my solution.
alopez_666 said:
Hi you there,
I start this thread because I´m having some issues installing 8.0 and 8.1 Oreo Roms, every of them have the same problems when I try to install them in my device (REDMI 3X). Actually, I have install and running Resurrection Remix Nougat + Gapps Micro, and it works fine.
When I try to install some Oreo Rom, I have these 2 possible options:
1 - I install rom + gapps (no matter which one, cause I tried each one): phone restarts and stucks at logo and after maybe 30 minutes I must restart it manually and reinstall a nougat rom. It never starts, and it is f...ng annoying.
2 - I install rom, afterwards, I restart and it works fine, but I have no gapps. The I boot into recovery and after gapps are installed I restart the phone, then gapps never work.
Please, I just get 2 times an oreo rom working, but now they never work, I don´t know whta to do. I also tried different recoveries, flashing them from PC, installing them from .img with TWRP, nothing seems to work. As I said: F...NG ANNOYING. I need heeeeeeeeeeeeeeeeelp
I think I am not the only one with this problem, if anyone can help I will appreciate that.
Thansk in advance.
Click to expand...
Click to collapse
Make sure using the latest twrp.
If u already have the latest twrp then the problem is in gapps, use gapps for oreo 8.1, maybe there is posted in ur rom thread
F4nno said:
Make sure using the latest twrp.
If u already have the latest twrp then the problem is in gapps, use gapps for oreo 8.1, maybe there is posted in ur rom thread
Click to expand...
Click to collapse
I already tried, it did not work, I have installed last gapps 8.1, last twrp, last everything and it never works, it keeps stucking again and again.
same ****ty problem with my 3s 2gb .. doesnt matter which oreo 8.1 rom i flash.. tried almost 4 oreo 8.1 roms.. all couldnt boot.. and if by chance it boots then cant add google account..
yet to try that 'Mount' thing solution suggested by Williams
You ask in wrong place stupid!
Ask in Q&A section stupid!
This section jus for downloading rom and kernel stupid!
I face the same issue with a Redmi 3 S (global version) with 3 GB RAM. Nougat ROM's are fine but all Oreo ROM's which I tried (most recent builds of PixelExperience, crDroid, Atomic-OS) show these boot loops. This is all with the latest TWRP installed (also tried custom builds), cleaned properly my device and was using the linked Oreo GAPPS. I usually flash in one instance 1) ROM, 2) GAPPS and 3) Magisk.
The only time I had a working Oreo ROM was after several tries with PixelExperience where on my last try I booted into safe mode and it somehow worked after that.
AidANiem said:
You ask in wrong place stupid!
Ask in Q&A section stupid!
This section jus for downloading rom and kernel stupid!
Click to expand...
Click to collapse
go **** your mother, she likes it
william.johhn7! said:
First of all, this should be in the Q&A section. Secondly, I can help you. I'm sure that you downloaded the gapps from the cloudkenzo something, right? Yeah those gapps do not have any issues, instead they make an issue. After flashing your rom and then these gapps file, the system partition normally unmounts. But usually when you boot into the ROM, the partition should re-mount. These unofficial gapps causes some issues with that. A simple solution- Just mount system in twrp, now reboot to system and you should be fine. I faced the same issue and this is my solution.
Click to expand...
Click to collapse
Thanks, it worked for me:
1 - full wipe and format
2 - install rom
3 - install gapps
4 - mount system
5 - reboot system
Everytime no matter what I do after flashing a ROM it eventually stops my calling ability. It calls out but no one. Can hear me and I can't hear them.
What OOS are you using? How are you exactly installing roms, step by step..? What rom installing?? Must have more details to help...
After i see that info ill know more. Possible its a hardware issue but i lean more towards software.. Let me know those things and i can help more.
How I install on OnePlus 6t global (or converted)
Boot twrp v3.5.0
Flash OOS 10.3.7 from repo or updater app
Flash rom (with gapps)
Flash twrp installer zip
Flash finalize
Format data (wipes it ALL)
Reboot recovery
Flash magisk
Reboot system
*Select magisk icon in app drawer and allow update, itll usually auto reboot in 5 secs after it updates..
Without gapps rom install:
Boot twrp
Flash OOS 10.3.7
Flash rom (without gapps included)
Flash twrp installer
Flash finalize
Format data (wipes everything)
Reboot recovery
Flash gapps package
Flash magisk
Reboot system
*Select magisk icon in app drawer and allow update, itll usually auto reboot in 5 secs after it updates..
Use NanoDroid Micro G and Fdroid instead of Gapps on a rom that has sig spoofing and NO Gapps included:
1st part of micro G install:
Boot twrp
Flash OOS 10.3.7
Flash rom
Flash twrp installer zip
Flash finalize
Format data
Reboot recovery
Flash magisk 21.4
Reboot system
Select magisk icon in app drawer and allow update, itll usually auto reboot in 5 secs after it updates..
2nd part of Micro G rom install:
Boot twrp
Install micro g (stable) zip from Nanolx xda thread
Install Fdroid from Nanolx xda
Reboot system
Can also use twrp mauronofrio's 3.4.0-9-11. Those are newest twrp. I've flashed everything made for 6t and never an issue like this. Link to micro g and fdroid installer and more in my signiture.
(Edit)
Hey thanks for the responce, so here we go....
How I flash my roms
Flash OOS 10.3.7/twrp
Reboot recovery
Flash other side of a/b with OOS/twrp
Reboot recovery
Flash rom/twrp installer
Reboot recovery
Flash additional as in my migrate/magisk
Format data
Boot
The Roms I've tried are resurrection remix latest build & msm extended & one other I can't remember which tho. & with stock kernel. I've tried flashing other kernels it doesn't do anything or I'm trying the wrong ones.
Im not new to flashing been doing this for a while now, there's always bugs but there's also ways to fix the bugs. Something interesting is just one time calling it worked fine then the next call... back to no audio feedback. There are 2 other Roms that did the same thing. It happens completely random, like I'll be done modding my phone to my likings go a month or a week & all the sudden no audio. I doubt it's hardware cuz if I format data calls work again but yay all my customizing is gone. I've tried all the suggestions from other forums asking similar question like editing build.prop & a few other things I can't remember nothing's worked. I love this phone to death but it's not easy to keep it stable unless I wanted to go with linegen ROM but ever since they left cyanogen their customizations are lame. Anyways I hope this is enough details I imagine not just let me know thanks I appreciate your help.
I'm no noob but definitely not a master, i use micro g. It's something in the data partition so technically it should be fixable im just sick of re flashing every time it decides it's not a phone anymore just a mini computer that can't compute phone call audio
jessejamesd2i said:
I'm no noob but definitely not a master, i use micro g. It's something in the data partition so technically it should be fixable im just sick of re flashing every time it decides it's not a phone anymore just a mini computer that can't compute phone call audio
Click to expand...
Click to collapse
The only time i experienced similar on my 6t is when i used a sound mod, the zen 5 sound mod from asus phone ported.. It caused me to have this no sound issue but when i disable it via magisk it was fine and i had sound again.
Have you tried going back to OOS 10.3.7 only and see if sound is an issue?
If this is present on OOS i would think its a hardware issue.