Oreo 8.0 8.1 installing issues - Xiaomi Redmi 3s Questions & Answers

Hi you there,
I start this thread because I´m having some issues installing 8.0 and 8.1 Oreo Roms, every of them have the same problems when I try to install them in my device (REDMI 3X). Actually, I have install and running Resurrection Remix Nougat + Gapps Micro, and it works fine.
When I try to install some Oreo Rom, I have these 2 possible options:
1 - I install rom + gapps (no matter which one, cause I tried each one): phone restarts and stucks at logo and after maybe 30 minutes I must restart it manually and reinstall a nougat rom. It never starts, and it is f...ng annoying.
2 - I install rom, afterwards, I restart and it works fine, but I have no gapps. The I boot into recovery and after gapps are installed I restart the phone, then gapps never work.
Please, I just get 2 times an oreo rom working, but now they never work, I don´t know whta to do. I also tried different recoveries, flashing them from PC, installing them from .img with TWRP, nothing seems to work. As I said: F...NG ANNOYING. I need heeeeeeeeeeeeeeeeelp
I think I am not the only one with this problem, if anyone can help I will appreciate that.
Thansk in advance.

First of all, this should be in the Q&A section. Secondly, I can help you. I'm sure that you downloaded the gapps from the cloudkenzo something, right? Yeah those gapps do not have any issues, instead they make an issue. After flashing your rom and then these gapps file, the system partition normally unmounts. But usually when you boot into the ROM, the partition should re-mount. These unofficial gapps causes some issues with that. A simple solution- Just mount system in twrp, now reboot to system and you should be fine. I faced the same issue and this is my solution.

alopez_666 said:
Hi you there,
I start this thread because I´m having some issues installing 8.0 and 8.1 Oreo Roms, every of them have the same problems when I try to install them in my device (REDMI 3X). Actually, I have install and running Resurrection Remix Nougat + Gapps Micro, and it works fine.
When I try to install some Oreo Rom, I have these 2 possible options:
1 - I install rom + gapps (no matter which one, cause I tried each one): phone restarts and stucks at logo and after maybe 30 minutes I must restart it manually and reinstall a nougat rom. It never starts, and it is f...ng annoying.
2 - I install rom, afterwards, I restart and it works fine, but I have no gapps. The I boot into recovery and after gapps are installed I restart the phone, then gapps never work.
Please, I just get 2 times an oreo rom working, but now they never work, I don´t know whta to do. I also tried different recoveries, flashing them from PC, installing them from .img with TWRP, nothing seems to work. As I said: F...NG ANNOYING. I need heeeeeeeeeeeeeeeeelp
I think I am not the only one with this problem, if anyone can help I will appreciate that.
Thansk in advance.
Click to expand...
Click to collapse
Make sure using the latest twrp.
If u already have the latest twrp then the problem is in gapps, use gapps for oreo 8.1, maybe there is posted in ur rom thread

F4nno said:
Make sure using the latest twrp.
If u already have the latest twrp then the problem is in gapps, use gapps for oreo 8.1, maybe there is posted in ur rom thread
Click to expand...
Click to collapse
I already tried, it did not work, I have installed last gapps 8.1, last twrp, last everything and it never works, it keeps stucking again and again.

same ****ty problem with my 3s 2gb .. doesnt matter which oreo 8.1 rom i flash.. tried almost 4 oreo 8.1 roms.. all couldnt boot.. and if by chance it boots then cant add google account..
yet to try that 'Mount' thing solution suggested by Williams

You ask in wrong place stupid!
Ask in Q&A section stupid!
This section jus for downloading rom and kernel stupid!

I face the same issue with a Redmi 3 S (global version) with 3 GB RAM. Nougat ROM's are fine but all Oreo ROM's which I tried (most recent builds of PixelExperience, crDroid, Atomic-OS) show these boot loops. This is all with the latest TWRP installed (also tried custom builds), cleaned properly my device and was using the linked Oreo GAPPS. I usually flash in one instance 1) ROM, 2) GAPPS and 3) Magisk.
The only time I had a working Oreo ROM was after several tries with PixelExperience where on my last try I booted into safe mode and it somehow worked after that.

AidANiem said:
You ask in wrong place stupid!
Ask in Q&A section stupid!
This section jus for downloading rom and kernel stupid!
Click to expand...
Click to collapse
go **** your mother, she likes it

william.johhn7! said:
First of all, this should be in the Q&A section. Secondly, I can help you. I'm sure that you downloaded the gapps from the cloudkenzo something, right? Yeah those gapps do not have any issues, instead they make an issue. After flashing your rom and then these gapps file, the system partition normally unmounts. But usually when you boot into the ROM, the partition should re-mount. These unofficial gapps causes some issues with that. A simple solution- Just mount system in twrp, now reboot to system and you should be fine. I faced the same issue and this is my solution.
Click to expand...
Click to collapse
Thanks, it worked for me:
1 - full wipe and format
2 - install rom
3 - install gapps
4 - mount system
5 - reboot system

Related

Can't get ANY Nougat rom working.

i'm on a g900f and every Nougat rom i've installed(RR, CM/LOS, CRDroid) , it just freezes and puts my into a bootloop. BUT, this only happens when i flash gApps (2/02/17 7.1.1 nano)
I'm now back on CM13 and i just hope Android 8 will work properly.
anyone know how to fix?
nialloshea said:
i'm on a g900f and every Nougat rom i've installed(RR, CM/LOS, CRDroid) , it just freezes and puts my into a bootloop. BUT, this only happens when i flash gApps (2/02/17 7.1.1 nano)
I'm now back on CM13 and i just hope Android 8 will work properly.
anyone know how to fix?
I had same issue took 2 days to discover gapps was doing it. Boot into recovery, wipe Data,System,Cache, Delvik Cache. Install whatever Version Nougat 7.1.1 rom. Install Mini_Dynamic_GApps-7.1.x-20170121.zip. (Find download link on xda or Google it.) Do factory reset and reboot. I never had any problems after that. Once i put all my apps back anf settings, it was like it never happened. Good luck.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
-Flash rom
-Flash latest opengapps
-Flash su if u need it
-Flash this fix ( https://www.androidfilehost.com/?w=files&flid=150763 )
-Done enjoy....
for the next lineage build all freezes in setup has been fixed
So if you cant wait for the next build just flash the fix file..
Flash img?
Hi
I am using custom roms since a while and I also got into this freezing problem. Now I see this .img here. Just that I don't do anything wrong. How to flash and .img? Need Odin or is it possible in recovery mode? Sorry for the numb question here but could not find an answer hot to do on my Galaxy S5

Why can't i use any rome except OmniROM? The Phone does not boot at all.

Hi there folks!
Sorry if i open a thread, probably you've discussed somewhere before about this problem that i'm experiencing.
My OnePlus 5 basically works only with omniROM, it doesn't boot at all when i try to install another one.
I tried with this:
https://forum.xda-developers.com/oneplus-6/development/rom-aospextended-rom-v5-7-t3825642
and this one:
https://forum.xda-developers.com/oneplus-5/development/rom-crdroid-android-5-0-t3836886
I followed every step (About CRAndroid), radio firmware 5.1.5 + TWRP 3.2.3 + Gapps + Magisk 17.1 and No Verity v3 (First try without noverity, second using it)
and i followed also every step neeeded in AOSPExtended rom.
When i try to boot the phone, after the OnePlus logo, nothing happens. The phone reboots in recovery mode, that's it.
If i repeat the same steps with OmniROM it works all fine, except Magisk. If i flash Magisk on the Omni it doesn't boot, if i flash SU it works.
Could it be something related to the encryption/Decription of the device?
When i go into TWRP it doesn't ask me for a pattern or a code. It should be decrypted, right? (i'm a bit confused about that).
I purchased the phone on Gearbest, could it be a particular version of the phone that doesn't allow me to work properly with roms?
Help
did you tried old stock ROMs, 4.* versions ? then 5.0.0 and then the others
Sometimes the partitions need to be wiped. Try a fastboot format userdata; fastboot format system.
azretier said:
did you tried old stock ROMs, 4.* versions ? then 5.0.0 and then the others
Click to expand...
Click to collapse
Actually when the phone arrived i've just unlocked the bootloader and installed a custom rom....what's the purpose of this?
moffa~ said:
Sometimes the partitions need to be wiped. Try a fastboot format userdata; fastboot format system.
Click to expand...
Click to collapse
You....you're a good guy.
I did the command you said, then i booted into TWRP, flashed AospExtended, Gapps Pico and Magisk 17.1 - after reboot it has been stuck @ 1+ logo, then it rebooted again (as always when it doesn't work) and i said "ok here we go again in the TWRP-loop" and INSTEAD it booted rom! Yes!

Problems updating from 5.1.7 to 9

Hi,
I have a rooted OP5, running 5.1.7 and TWRP. I used Oxygen Updater to download the new android 9 ROM. I tried to install via TWRP, but got an error about zip compatability & a treble problem. I found a thread stating that I needed a newer TWRP to fix the treble problem, so I installed TWRP_3.2.3-Pie_siankatabg_OP5 , which said it had Pie support, from here:
https://androidfilehost.com/?fid=1322778262903996029
That worked fine, but when I tried to flash the 9 ROM, I got still got the same error. Another post said to remove compatibility.zip from the ROM zip. I did that, and it now installed, but it wouldn't boot. Re-flashing 5.1.7 booted fine. I tried another TWRP - twrp-3.2.3-0-20181227-codeworkx-nocompatcheck-cheeseburger from here:
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
That installs, and boots to system, but won't boot to recovery, so I can't install the 9 ROM.
Any ideas where I go from here to upgrade to 9?
Thanks!
richstant said:
Hi,
I have a rooted OP5, running 5.1.7 and TWRP. I used Oxygen Updater to download the new android 9 ROM. I tried to install via TWRP, but got an error about zip compatability & a treble problem. I found a thread stating that I needed a newer TWRP to fix the treble problem, so I installed TWRP_3.2.3-Pie_siankatabg_OP5 , which said it had Pie support, from here:
https://androidfilehost.com/?fid=1322778262903996029
That worked fine, but when I tried to flash the 9 ROM, I got still got the same error. Another post said to remove compatibility.zip from the ROM zip. I did that, and it now installed, but it wouldn't boot. Re-flashing 5.1.7 booted fine. I tried another TWRP - twrp-3.2.3-0-20181227-codeworkx-nocompatcheck-cheeseburger from here:
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
That installs, and boots to system, but won't boot to recovery, so I can't install the 9 ROM.
Any ideas where I go from here to upgrade to 9?
Thanks!
Click to expand...
Click to collapse
Hi, I got Pie to install with TWRP_3.2.3-Pie_siankatabg_OP5 on my device.
Go to this link:
https://forum.xda-developers.com/showpost.php?p=78523940&postcount=13
And follow my post on the part where it says:
" Notes for the Pie update: "
Let us know if those steps work for you. The firmware is linked to on there, pre-modified. Try flashing that pre-modified zip and see if your device boots.
richstant said:
Hi,
I have a rooted OP5, running 5.1.7 and TWRP. I used Oxygen Updater to download the new android 9 ROM. I tried to install via TWRP, but got an error about zip compatability & a treble problem. I found a thread stating that I needed a newer TWRP to fix the treble problem, so I installed TWRP_3.2.3-Pie_siankatabg_OP5 , which said it had Pie support, from here:
https://androidfilehost.com/?fid=1322778262903996029
That worked fine, but when I tried to flash the 9 ROM, I got still got the same error. Another post said to remove compatibility.zip from the ROM zip. I did that, and it now installed, but it wouldn't boot. Re-flashing 5.1.7 booted fine. I tried another TWRP - twrp-3.2.3-0-20181227-codeworkx-nocompatcheck-cheeseburger from here:
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
That installs, and boots to system, but won't boot to recovery, so I can't install the 9 ROM.
Any ideas where I go from here to upgrade to 9?
Thanks!
Click to expand...
Click to collapse
It sounds like you did not follow the detailed flashing instructions in the first post here: https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003
Is your device storage encrypted or decrypted? Have you flashed magisk? Have you used an older magisk(your end link leads to my post where I mention that)? Have you downloaded the rom file without compatibility.zip or did you removed it on your own?
strongst said:
It sounds like you did not follow the detailed flashing instructions in the first post here: https://forum.xda-developers.com/oneplus-5/how-to/official-oxygenos-4-5-2-7-1-1-ota-t3627003
Is your device storage encrypted or decrypted? Have you flashed magisk? Have you used an older magisk(your end link leads to my post where I mention that)? Have you downloaded the rom file without compatibility.zip or did you removed it on your own?
Click to expand...
Click to collapse
Thanks for the links both, but still no go. I was on Magisck 17.1, uninstalled Magisk with the latest uninstaller, flashed the ROM with compatability.zip already removed. Same result as before - I get the oneplus logo, then it just reboots instead of starting the system. I've only wiped cache & dalvik, I don't really want to wipe more than that if I can help it - it is worth trying a system/vendor/data wipe? I recovered by flashing back to 5.1.7 (also updated to Magisk 18 while I was at it).
Any more ideas? One thing I find a little weird is that I'm on the @siankatabg TWRP, when I tried either the bluespark & codeworx TWPR, I couldn't get into recovery with either, I just got a blank screen with a LED staying on light blue. Only the siankatabg recovery works. Surely any of them should work? Does this point to a problem?
I'm not sure what you mean by encrypted or not - I get messages about unencrypting when going into recovery, which I assume means I am encrypted?
THanks!
richstant said:
Thanks for the links both, but still no go. I was on Magisck 17.1, uninstalled Magisk with the latest uninstaller, flashed the ROM with compatability.zip already removed. Same result as before - I get the oneplus logo, then it just reboots instead of starting the system. I've only wiped cache & dalvik, I don't really want to wipe more than that if I can help it - it is worth trying a system/vendor/data wipe? I recovered by flashing back to 5.1.7 (also updated to Magisk 18 while I was at it).
Any more ideas? One thing I find a little weird is that I'm on the @siankatabg TWRP, when I tried either the bluespark & codeworx TWPR, I couldn't get into recovery with either, I just got a blank screen with a LED staying on light blue. Only the siankatabg recovery works. Surely any of them should work? Does this point to a problem?
I'm not sure what you mean by encrypted or not - I get messages about unencrypting when going into recovery, which I assume means I am encrypted?
THanks!
Click to expand...
Click to collapse
Maybe try backing your device up, and then locking the bootloader. Try updating with stock recovery on a locked bootloader. If that works, you can then unlock the bootloader and copy your data back
richstant said:
Thanks for the links both, but still no go. I was on Magisck 17.1, uninstalled Magisk with the latest uninstaller, flashed the ROM with compatability.zip already removed. Same result as before - I get the oneplus logo, then it just reboots instead of starting the system. I've only wiped cache & dalvik, I don't really want to wipe more than that if I can help it - it is worth trying a system/vendor/data wipe? I recovered by flashing back to 5.1.7 (also updated to Magisk 18 while I was at it).
Any more ideas? One thing I find a little weird is that I'm on the @siankatabg TWRP, when I tried either the bluespark & codeworx TWPR, I couldn't get into recovery with either, I just got a blank screen with a LED staying on light blue. Only the siankatabg recovery works. Surely any of them should work? Does this point to a problem?
I'm not sure what you mean by encrypted or not - I get messages about unencrypting when going into recovery, which I assume means I am encrypted?
THanks!
Click to expand...
Click to collapse
Please use an older recovery like twrp-3.2.3-0-20181031-codeworkx-cheeseburger.img the actual pie recoveries require pie firmware(mentioned in last post of blue spark thread for example).
strongst said:
Please use an older recovery like twrp-3.2.3-0-20181031-codeworkx-cheeseburger.img the actual pie recoveries require pie firmware(mentioned in last post of blue spark thread for example).
Click to expand...
Click to collapse
OK, I understand now - if I use an older TWRP, or the siankatabg version, it works fine. I can then flash the Pie ROM, however it still won't boot - I get the oneplus logo, then it just reboots. However having done the Pie flash, I can then flash the more recent TWRPs (codeworx or Bluespark), and can now get into recovery fine. However Pie still won't boot - I've even tried re-flashing the Pie ROM from within the newer TWRPs, but the result is the same - it gets to the oneplus logo, then reboots. At this stage I guess wiping system/vendor/data is the only way forwards?
*Edit* - OK, so wiping everything fixed the issue, I'm now on Pie. Flashing Magisk didn't work when flashing the ROM, but I'll try again once it's finished downloading all my apps etc.

What's the REAL method to successfully install a working TWRP, root and custom ROM?

Hi All, I have been reading various threads here and searching on Google for finding a method that truly works for successfully installing a custom ROM, getting TWRP installed and rooting with Magisk. So far, all I have found are numerous and usually contradictory methods and about 7 or 8 different versions of TWRP (so which one is completely stable and working properly?). I have tried several methods over the past two weeks and none of them are working completely.
Sometimes, I'll get a version of TWRP installed, but then trying to reboot to recovery results in a "system has been destroyed" image. Or I'll succeed in getting a custom ROM installed, but Gapps will fail with error 20 or error 70 or there's not enough space on the system partition (and I'm just trying to install the Pico version). Even I double check that the Gapps version matches the ROM version I've used, but still get an error 20 displayed.
From what I had read on numerous threads, it seemed like CosmicDans TWRP would be the one I should go with. I downloaded both of his files (the fastboot image and the zipped installer) and fastboot his "boot-recovery.img" that was specifically for fastboot only and from that recovery, I installed his "TWRP-Installer-3.2.1-with-Tissot-Manager-2.5.zip". Everything appeared as if successfully installed as per the logs, but immediately upon attempting to reboot to recovery, I get the "system has been destroyed" image.
What I want to do is:
Get a working custom ROM (preferably Pie) installed
Install Gapps
Install a working TWRP (that will not display "system has been destroyed" whenever trying to boot to recovery)
Finally, install Magisk and root my phone
Can anyone suggest a site or link or a post somewhere that would explain everything correctly and is actually working? This has been a very frustrating experience. I'm almost sorry that I even bought the Mi A1. Never had any problems installing custom ROMs or rooting the OnePlus devices. All I'm left with currently is an expensive paperweight.
Thanks so much!
Cheers
From your description, I'm certain that you do this on a Pie stock rom right? the installer never work on Pie stock and will cause system destroy. Just hotboot TWRP. And for the Gapps, I think it's due to the time you install it. From my experience, install Gapps after rom and before Magisk usually work. Install after magisk or custom kernel will somehow cause the same issue that you described.
Oh, in case you want to install LineageOS, you have to come to the LOS16 thread and download the TWRP from there, it's the only TWRP that can install LOS16.
Never_Sm1le said:
From your description, I'm certain that you do this on a Pie stock rom right? the installer never work on Pie stock and will cause system destroy. Just hotboot TWRP. And for the Gapps, I think it's due to the time you install it. From my experience, install Gapps after rom and before Magisk usually work. Install after magisk or custom kernel will somehow cause the same issue that you described.
Oh, in case you want to install LineageOS, you have to come to the LOS16 thread and download the TWRP from there, it's the only TWRP that can install LOS16.
Click to expand...
Click to collapse
Thank you for your reply. When I first started the process to change to a custom ROM, I was on stock Pie. But one of the times I was wiping the device after one more problem, I accidentally also wiped Internal Storage as well. I didn't have much there since I had already backed some things up in advance. Now it's virtually empty. The steps I take are:
1. Hotboot TWRP
2. Install Custom ROM
3. Hotboot TWRP again
4. Install Gapps
This is where I usually have some problem. It's the process of installing Gapps that creates some error.
I also did attempt to install LineageOS 16 using the TWRP recovery that was linked in the post. Follow the instructions precisely I believe and now when it's time to install Gapps, I get error 64. I can't understand why. I am attempting to install "open_gapps-arm64-9.0-nano". This should be compatible with the Mi A1 with LineageOS 16 from what I am able to tell.
No matter what TWRP version I use, no matter what custom ROM I try, no matter what steps I take, there is always some issue that prevents me from completing any installation. But the abundance of so many conflicting posts don't help either. One post will state to use a specific TWRP and certain steps; another post will suggest completely different steps using another TWRP; and yet another post will provide different steps still. In some instances, there will be steps listed in the script on the phone regarding the next steps after the ROM installation that are completely different then the steps provided in the post for that ROM in the forum.
It would just be tremendously helpful to get some instructions that actually do work. As of now, I'm about ready to dump this phone in the trash bin. It's horrible. I can't even tell if it might be decent eventually since I never can get anything installed.
Thanks again for your reply Never_Sm1le.
Cheers.
There is no permanent TWRP install for android 9 on MiA1 as far as i know.
Hotboot works just perfect.
Brianne8 said:
Thank you for your reply. When I first started the process to change to a custom ROM, I was on stock Pie. But one of the times I was wiping the device after one more problem, I accidentally also wiped Internal Storage as well. I didn't have much there since I had already backed some things up in advance. Now it's virtually empty. The steps I take are:
1. Hotboot TWRP
2. Install Custom ROM
3. Hotboot TWRP again
4. Install Gapps
This is where I usually have some problem. It's the process of installing Gapps that creates some error.
I also did attempt to install LineageOS 16 using the TWRP recovery that was linked in the post. Follow the instructions precisely I believe and now when it's time to install Gapps, I get error 64. I can't understand why. I am attempting to install "open_gapps-arm64-9.0-nano". This should be compatible with the Mi A1 with LineageOS 16 from what I am able to tell.
No matter what TWRP version I use, no matter what custom ROM I try, no matter what steps I take, there is always some issue that prevents me from completing any installation. But the abundance of so many conflicting posts don't help either. One post will state to use a specific TWRP and certain steps; another post will suggest completely different steps using another TWRP; and yet another post will provide different steps still. In some instances, there will be steps listed in the script on the phone regarding the next steps after the ROM installation that are completely different then the steps provided in the post for that ROM in the forum.
It would just be tremendously helpful to get some instructions that actually do work. As of now, I'm about ready to dump this phone in the trash bin. It's horrible. I can't even tell if it might be decent eventually since I never can get anything installed.
Thanks again for your reply Never_Sm1le.
Cheers.
Click to expand...
Click to collapse
Your reply makes me want to stay on LOS 15.1 even more. So many weird problems happen in LOS 16
I followed all the instructions of Resurrection Remix and TWRP is installed and magisk works perfect.
Hello friend, I am currently on Lineage OS 16.0 with Magisk, Opengapps and TWRP installed. I can boot to recovery with no problems at all; in fact, I used the flashed TWRP to install Magisk.
Here are the steps I took:
Download the TWRP boot img and TWRP installer by CosmicDan (Link below)
Copy the custom rom ZIP, TWRP installer, Magisk installer and Gapps into your SD card
Reboot your device to bootloader
Boot into TWRP using
Code:
fastboot boot boot-recovery.img
do NOT flash via fastboot
Go to Wipe>Advanced Wipe and wipe System, Dalvik, Data, Internal Storage
Press the home button and proceed to flashing the custom rom ZIP
After flashing, reboot to BOOTLOADER then do step 4 again
Flash Gapps, TWRP Installer, then Magisk Installer. You should flash TWRP first before Magisk
Reboot to system and you're good to go
Note that if you are installing Lineage OS and wish to receive nightly OTA updates, having an installed TWRP as your recovery might result in a bootloop after updating. Also, if you want to manually flash the nightly update, you need to boot to the TWRP variant of @flex1911 as flashing lineage using other TWRP will result in an error. I suggest not installing TWRP when using Lineage OS.
(Source: [ROM][OFFICIAL] LineageOS 16.0 for Xiaomi Mi A1)
Regarding your problem with flashing, try to check which slot you are currently in by going to TWRP>Reboot. Keep in mind that when you install a rom, it will always be installed to the inactive slot. For example if you are in slot A, your rom will be installed in slot B. After rebooting, your current active slot will be where the rom is installed. When installing Gapps or any addons, check the slot first. However, when flashing TWRP installer, it will patch both boot_a and boot_b and this is the reason why you need to install twrp first before magisk as TWRP also modifies the boot image.
Download:
Bootable TWRP
TWRP Installer
(Both files by @CosmicDan)
Cheers mate!
rexendz said:
Here are the steps I took:
Download the TWRP boot img and TWRP installer by CosmicDan (Link below)
Copy the custom rom ZIP, TWRP installer, Magisk installer and Gapps into your SD card
Reboot your device to bootloader
Boot into TWRP using
Code:
fastboot boot boot-recovery.img
do NOT flash via fastboot
Go to Wipe>Advanced Wipe and wipe System, Dalvik, Data, Internal Storage
Press the home button and proceed to flashing the custom rom ZIP
After flashing, reboot to BOOTLOADER then do step 4 again
Flash Gapps, TWRP Installer, then Magisk Installer. You should flash TWRP first before Magisk
Reboot to system and you're good to go
Click to expand...
Click to collapse
Thanks for the lengthy reply. However, those steps do not work as you have described. Since, if I wipe Internal Storage (as per your step 5), I just deleted all the files I copied previously in Step 2. What I did, was wipe everything, *then* copied all the files and tried to install. As soon as it try to install Gapps, I get Error 64 again. I am absolutely using "open_gapps-arm64-9.0-nano" and it always fails. I have attempted 11 or 12 times already, using different slots, using different dates of "open_gapps-arm64-9.0-nano" and ALWAYS Error 64. I don't know any other version of Gapps I should be trying. The arm64 versions never will work for me.
I give up. I'll just have to stick with stock ROM. No custom ROMs will work for me no matter which one I use or which version of TWRP I use. I already wasted too much of my life with this garbage phone.
ccalixtro said:
I followed all the instructions of Resurrection Remix and TWRP is installed and magisk works perfect.
Click to expand...
Click to collapse
Hi,
Which version of TWRP did you use? There's too many. I don't know which one is considered to be the right one.
Brianne8 said:
Thanks for the lengthy reply. However, those steps do not work as you have described. Since, if I wipe Internal Storage (as per your step 5), I just deleted all the files I copied previously in Step 2. What I did, was wipe everything, *then* copied all the files and tried to install. As soon as it try to install Gapps, I get Error 64 again. I am absolutely using "open_gapps-arm64-9.0-nano" and it always fails. I have attempted 11 or 12 times already, using different slots, using different dates of "open_gapps-arm64-9.0-nano" and ALWAYS Error 64. I don't know any other version of Gapps I should be trying. The arm64 versions never will work for me.
I give up. I'll just have to stick with stock ROM. No custom ROMs will work for me no matter which one I use or which version of TWRP I use. I already wasted too much of my life with this garbage phone.
Click to expand...
Click to collapse
Copy the files to your external SD card not internal storage. But if you don't have an ext SD card, don't wipe internal storage.
Also try to check if system is properly mounted when installing gapps.
May I ask what custom rom you are trying to install?
I suggest you try Pixel Experience as it already has a builtin Gapps so you dont have to flash opengapps.

[T560] All Android 7 ROMs not working, stuck on bootloop

Hi all,
so I can't install any Nougat ROMs as they all make my device go to bootloop on the first reboot after flashing, and just keeps the device on the boot animation for hours
This includes LOS14.1, DotOS and ViperOS all versions.
When I flash the CM13 ROM (what I'm using now), everything works normally on the first try.
I can't be the only one experiencing this bootloop, anyone else having these issues?
Did anyone else get bootlooped? Did you manage to circumvent the issue?
Any help is appreciated
phayme said:
Hi all,
so I can't install any Nougat ROMs as they all make my device go to bootloop on the first reboot after flashing, and just keeps the device on the boot animation for hours
This includes LOS14.1, DotOS and ViperOS all versions.
When I flash the CM13 ROM (what I'm using now), everything works normally on the first try.
I can't be the only one experiencing this bootloop, anyone else having these issues?
Did anyone else get bootlooped? Did you manage to circumvent the issue?
Any help is appreciated
Click to expand...
Click to collapse
Did you flash magisk or supersu before fist boot?
I tried with and without rooting, of course before flashing the ROMs (and GApps) I would wipe everything except sd card.
Really don't know what's the issue as the majority of people that reported bootlooping on these ROMs managed to get it fixed later, but none of that works for me.
I tried restoring back to 4.4 then trying again, I tried leaving the boot animation until the tablet runs out of battery then trying again, still no luck.
When I flash the CM13 rom from xda, everything works fine on the first try and first boot takes only a new minutes. I also managed to install the CM12.1 and the latest LightROM for the t560. Weird
Anyway I can only hope this gets resolved, willing to try anything as I don't use this tablet for anything relevant. It's the UK version, if that matters.
phayme said:
I tried with and without rooting, of course before flashing the ROMs (and GApps) I would wipe everything except sd card.
Really don't know what's the issue as the majority of people that reported bootlooping on these ROMs managed to get it fixed later, but none of that works for me.
I tried restoring back to 4.4 then trying again, I tried leaving the boot animation until the tablet runs out of battery then trying again, still no luck.
When I flash the CM13 rom from xda, everything works fine on the first try and first boot takes only a new minutes. I also managed to install the CM12.1 and the latest LightROM for the t560. Weird
Anyway I can only hope this gets resolved, willing to try anything as I don't use this tablet for anything relevant. It's the UK version, if that matters.
Click to expand...
Click to collapse
Try to flash rom without gaaps or magisk only base rom
gitanillo87 said:
Try to flash rom without gaaps or magisk only base rom
Click to expand...
Click to collapse
Make sure the ROM is for your Device. T560NU has a different chip set that the LTE model and you can't interchange roms.
@gitanillo87
Try to flash rom without gaaps or magisk only base rom [\QUOTE]
I did, still not working unfortunately
@magicmckinney Make sure the ROM is for your Device. T560NU has a different chip set that the LTE model and you can't interchange roms. [\QUOTE]
yeah all these roms are for my device (T560)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Flash my stock rom,with TPRW and later flash any nougat rom
First of all flash clean stock rom using Odin
-Install TWRP
-Factory reset
-Install CM13 and gapps (root optional)
-Wait to boot and pass all the steps in the initial setup
-When tablet completely booted reboot to TWRP
-Install any Android 7 rom ang gapps without factory reset
-Reboot
-Cross fingers and eventually it will boot!!!

Categories

Resources