Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Damn, what did you flash? Seems you're first user reporting hard brick, sorry about that...
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Lol mate. That will happen when you do something which isn't supposed to be done.
.
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Hel.
Click to expand...
Click to collapse
Press volume - and power button and at the same time attach the micro usb cable to your phone. Your phone should boot into bootloader.
Timing is must.
If this doesn't help, then you have to open your phone and disconnect the battery terminals and reconnect them after 1 minute.
Hope this helps.
pankajgavri said:
Press volume - and power button and at the same time attach the micro usb cable to your phone. Your phone should boot into bootloader.
Timing is must.
If this doesn't help, then you have to open your phone and disconnect the battery terminals and reconnect them after 1 minute.
Hope this helps.
Click to expand...
Click to collapse
Well, he said PC recognizes it like Qualcomm something... It reminds me the old hardbricks of moto g 2013 (falcon). I'm still wondering what have he flashed?
Enviado desde mi XT1681 mediante Tapatalk
Yes You Are Right
abeloman said:
Well, he said PC recognizes it like Qualcomm something... It reminds me the old hardbricks of moto g 2013 (falcon). I'm still wondering what have he flashed?
Enviado desde mi XT1681 mediante Tapatalk
Click to expand...
Click to collapse
Yes u are right it's the old Moto g hard bricked type
I flashed also Rom which is meant for Moto z play and this happened plz solve this by searching across internet I found method to flash it using qfil but I need rawprogrammer0.xml and patch0.xml and 3 more similar items for flashing it if any dev can build this it would be so helpful????
And power and volume down doesn't work as u said when I connect for charging or PC LED lights up for about 80-90 times it would be great if any one can help me??
Whoa! I Thought I Was The Only One
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Guys Im First Time Here And Even My Device Is Bricked Because Of Flashing Wroung TWRP And When I Connect My Device To Pc LED Starts Blinking Help Needed Urgently-------------------------------------?
:crying::crying::crying::crying:
Any hard bricked device owner online I maybe help him
Yes
Mandy $ingh said:
Any hard bricked device owner online I maybe help him[/QUOTE
Yes I am always online please help me
Click to expand...
Click to collapse
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
?
????
virajkin said:
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
Click to expand...
Click to collapse
I was looking blankflash for Moto G5 Cedric with no luck. Any ideas? Do they exist?
Enviado desde mi Moto G (5) mediante Tapatalk
Do you have stock rom?
virajkin said:
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
Click to expand...
Click to collapse
Where did you got this? How do you know it is for Moto G5 Plus potter????
Just sitting here with popcorn and a banner waiving hoping you bros all get the blissful (hello moto) greeting soon
Moto G5 Plus Hard Bricked
My Moto G5 Plus Dead [Hard Bricked] anyone please help! When I connect Charger/to Laptop only LED light is blinking.
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Did you try to run ADB DEVICES at a command prompt at your computer to see if ADB is detecting your device? Like the following image... If the device isn't being recognized, and as you said that the screen isn't turning on, it will be impossible to do anything to fix it...
virajkin said:
download blankflash for moto g5 plus (potter) by @vache from here
follow this steps
Click to expand...
Click to collapse
this worked for me !!! Thank you so much!
Installed LG G5 Rom onto my MOTO G5 !
Guys please help, I thought my mobile was LG G5 but its the Moto G5!
I flashed the LG stock on it and now nothings working!
I carn't access recovery etc.
When i plug the phone into the PC it shows up Under my Computer as
LG Airdrive!
How can i revert back to install the custom rom onto my Moto G5?
Any Help would be apprecited.
Thank You.
Related
Mod Please close this thread.
Thanks
Lucas
Reserved
Awesome info will help if we brick our phone
Falcon G said:
Unbrick Your Device
What is A Brick?
A Brick Usually Occurs when you Flash a Wrong Firmware on your device or you try to downgrade your bootloader. In both the cases if you see nothing but a blank screen and "qhsusb_bulk" when connecting to the computer (Check Devices and Printers on your PC) .
Prerequisites
Stock Moto E Firmware of your Choice
Motorola USB Drivers
MFastbootv2
Blanflash
RiffBox JTAG Drivers
INSTRUCTIONS
If you have A 64-Bit Processor you'll need to disable driver signature Enforcement. Press F8 while the computer is booting and then choose the option.
Go To Start and search for Device Manager
Plug in your Moto e
You'll See qhsusb_bulk
Now select update driver Software
Choose from the Riffbox Jtag Drivers.
Now you'll see Qualcomm HS-USB QLoader 9008
Unzip the motorola qboot utility and run blankflash.bat
Now Enter into fastboot from your Moto e
You can now flash the firmwares compatible with your bootloader version
Click to expand...
Click to collapse
Is this only for Moto E or all other Qualcom devices? BTW nice post.
Rohit99 said:
Is this only for Moto E or all other Qualcom devices? BTW nice post.
Click to expand...
Click to collapse
Thanks
No but this is only for moto e
Falcon G said:
Thanks
No but this is only for moto e
Click to expand...
Click to collapse
ok got it thanks for the reply
Falcon G said:
Unbrick Your Device
Click to expand...
Click to collapse
Has already someone bricked and unbricked moto e here on XDA? I ask this because someone could try and see if works. With so many official versions this could happen, eventually. My luck I hasn't need do this, but is great information to have around.
Thanks.
Indeed, very helpful thread for moto e
It appears that the blankflash files from the first post is for a Moto G.
Moto E uses a different SOC (Snapdragon 200 MSM8210) and so I doubt the Moto G Programmer and Boot partitions for Snapdragon 400 MSM8x26 would actually work on the Moto E.
skiddd said:
It appears that the blankflash files from the first post is for a Moto G.
Moto E uses a different SOC (Snapdragon 200 MSM8210) and so I doubt the Moto G Programmer and Boot partitions for Snapdragon 400 MSM8x26 would actually work on the Moto E.
Click to expand...
Click to collapse
I'd like to think that the OP tested this himself before posting but anymore on xda you never know..
I may be wrong but I do think the moto g and e both share a diff soc however I "think" they have the same partition layout.
If not people may end up needing to do a few more tricks depending exactly on what the blanflash script/app is actually doing.
Sent from my XT1019 using Tapatalk
Programmer.bin inside blankflash.rar will NEVER work on a Moto E because it was RSA signed using Moto G (first gen) Private Keys.
Inside blankflash has support for 3 types of SOC for Moto G first Gen:
MSM8226
MSM8626
MSM8926
Motorola used different RSA keys for each SOC, that is why you have 3 types of programmer.bin and singleimage.mbn inside...
Moto G (2nd Gen 2014) and Moto E have different private keys used and keys are burned into SOC efuse during pre-production.
I know this because I have actual phones on hand and I am very much familiar with qualcomm 9008 "emergency download" procedure.
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
skiddd said:
Programmer.bin inside blankflash.rar will NEVER work on a Moto E
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
Click to expand...
Click to collapse
Not working and singleimage.mbn fails !!! WHat to do ?
The firmware links are removed can anyone help me?
shashanksetty said:
The firmware links are removed can anyone help me?
Click to expand...
Click to collapse
Is it hard bricked or you can still use FASTBOOT ?
TheDj408 said:
Is it hard bricked or you can still use FASTBOOT ?
Click to expand...
Click to collapse
Hard bricked! I would have flashed something if I could access fastboot:crying:
This is for moto g....
someone provide bootloader for moto e
hard bricked phone after downgrading to kitkat .now it doesnt turns on
arunsai123 said:
hard bricked phone after downgrading to kitkat .now it doesnt turns on
Click to expand...
Click to collapse
Same here :crying::crying::crying:
---------- Post added at 10:36 AM ---------- Previous post was at 10:34 AM ----------
skiddd said:
Programmer.bin inside blankflash.rar will NEVER work on a Moto E because it was RSA signed using Moto G (first gen) Private Keys.
Inside blankflash has support for 3 types of SOC for Moto G first Gen:
MSM8226
MSM8626
MSM8926
Motorola used different RSA keys for each SOC, that is why you have 3 types of programmer.bin and singleimage.mbn inside...
Moto G (2nd Gen 2014) and Moto E have different private keys used and keys are burned into SOC efuse during pre-production.
I know this because I have actual phones on hand and I am very much familiar with qualcomm 9008 "emergency download" procedure.
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
Click to expand...
Click to collapse
Is there any way to recover my phone ?? I can generate dumps from a friend's phone if required :crying::crying: Plzzz help :crying::crying:
now i guess only lollipop firmware files (in .bin,XML,etc format)can unbrick our device
nik007rock said:
now i guess only lollipop firmware files (in .bin,XML,etc format)can unbrick our device
Click to expand...
Click to collapse
Are you sure ? In that matter I can wait !
hi,
i have a lenovo a1000 (phone) with Spreadtrum SC7731 chipset. last week i tried to download an update via wifi, after the phone tried to install it ended up with an error. the phone appeared to hang so i pushed the power button and nothing happened, still got the same error message. i ended up pulling out the battery. now when the phone is turned on, its just the lenovo and powered by android logo, nothing happens.
no defects on hardware just the software that's broken. a technician friend of mine said that it can be fixed with a firmware. anyone out here who can please point me to the proper link. i am searching for a day or so not but i cant find the correct page. the one i downloaded previously doesn't work.
thanks in advance
same problem here
Hi,
Is this the same device as the Lenovo A1010a20 A plus?
I answer myself, I don't think so, but I see the specs are pretty similar
Can anybody point to where can I find more info about the 1010a20?
Thanks in advance
same problem here
kifto said:
Hi,
Is this the same device as the Lenovo A1010a20 A plus?
I answer myself, I don't think so, but I see the specs are pretty similar
Can anybody point to where can I find more info about the 1010a20?
Thanks in advance
Click to expand...
Click to collapse
hi, your Aplus is not A1000 you have chipset mediatek not spreadtrum, 4,5inch screen, 1cm longer, and circle camera glass.
www gsmarena com/compare.php3?idPhone1=8320&idPhone2=7605
hi do you know if the lenovo 1010a20 model will send the caller a txt message if its unavailable?
xda.droid11 said:
hi,
i have a lenovo a1000 (phone) with Spreadtrum SC7731 chipset. last week i tried to download an update via wifi, after the phone tried to install it ended up with an error. the phone appeared to hang so i pushed the power button and nothing happened, still got the same error message. i ended up pulling out the battery. now when the phone is turned on, its just the lenovo and powered by android logo, nothing happens.
no defects on hardware just the software that's broken. a technician friend of mine said that it can be fixed with a firmware. anyone out here who can please point me to the proper link. i am searching for a day or so not but i cant find the correct page. the one i downloaded previously doesn't work.
thanks in advance
Click to expand...
Click to collapse
dustine0987 said:
same problem here
Click to expand...
Click to collapse
Here you have , first try with latest Version
https://firmwarefile.com/lenovo-a1000
---------- Post added at 03:31 PM ---------- Previous post was at 03:27 PM ----------
kifto said:
Hi,
Is this the same device as the Lenovo A1010a20 A plus?
I answer myself, I don't think so, but I see the specs are pretty similar
Can anybody point to where can I find more info about the 1010a20?
Thanks in advance
Click to expand...
Click to collapse
If you need firmware for your device here is :
http://www.mediafire.com/file/npa55df4n41bbb8/Lenovo_A1010a20_S256_MT6580_20170418.zip
Information for your device :
https://www.gsmarena.com/lenovo_a_plus-8320.php
Opened a Telegram Channel for this mobile phone Lenovo A1000: https://t.me/LenovoA1000phone
can anyone help in bootlooder of moto c plus
bharath parupalli said:
can anyone help in bootlooder of moto c plus
Click to expand...
Click to collapse
same here,...i'm also trying but giving error FAILED(remote:unknown command)
Any solution?
You cannot unlock the bootloader of this device, just like in the Moto C you have to force-flash through memory writing on SP Flash Tool
I have an inconvenience my phone is a xt1641 is dual sim .. when connecting the phone to the pc with twrp appears moto g4 plus ... but when flashing it by any means or with any room it becomes a normal g4 moto bone the footprint no appears or appears to administer and when entering the info of the device it appears that it is normal g4 moto no more ... and in the hardware section the ref xt1641 appears ... with some rooms it does not detect the dual sim and with other yes. .. but it still appears normal g4 moto in any of the cases ... I do not know if you can help me ???
elcfo said:
I have an inconvenience my phone is a xt1641 is dual sim .. when connecting the phone to the pc with twrp appears moto g4 plus ... but when flashing it by any means or with any room it becomes a normal g4 moto bone the footprint no appears or appears to administer and when entering the info of the device it appears that it is normal g4 moto no more ... and in the hardware section the ref xt1641 appears ... with some rooms it does not detect the dual sim and with other yes. .. but it still appears normal g4 moto in any of the cases ... I do not know if you can help me ???
Click to expand...
Click to collapse
Please read/ask here https://forum.xda-developers.com/moto-g4-plus/help/moto-g4-pluss-model-changed-to-g4-lost-t3496912
Thread closed - duplicated as above. Please read/search before posting - thanks.
my motorola g6 when I restart it in bootloader mode and it appears baseband <not found>
Hi together,
i have the same Problem, my Motorola Moto G6 Plus XT1626-3 doesent have any Baseband anymore.
Can someone tell me if the is to repair? Some Tips or hints for me?
Thanks a lot.
Greetings
cocolocko said:
Hi together,
i have the same Problem, my Motorola Moto G6 Plus XT1626-3 doesent have any Baseband anymore.
Can someone tell me if the is to repair? Some Tips or hints for me?
Thanks a lot.
Greetings
Click to expand...
Click to collapse
Your model is XT1926-3 . Did you flash a new ROM or an update? Usually your baseband string appears after a complete boot to system.