Mod Please close this thread.
Thanks
Lucas
Reserved
Awesome info will help if we brick our phone
Falcon G said:
Unbrick Your Device
What is A Brick?
A Brick Usually Occurs when you Flash a Wrong Firmware on your device or you try to downgrade your bootloader. In both the cases if you see nothing but a blank screen and "qhsusb_bulk" when connecting to the computer (Check Devices and Printers on your PC) .
Prerequisites
Stock Moto E Firmware of your Choice
Motorola USB Drivers
MFastbootv2
Blanflash
RiffBox JTAG Drivers
INSTRUCTIONS
If you have A 64-Bit Processor you'll need to disable driver signature Enforcement. Press F8 while the computer is booting and then choose the option.
Go To Start and search for Device Manager
Plug in your Moto e
You'll See qhsusb_bulk
Now select update driver Software
Choose from the Riffbox Jtag Drivers.
Now you'll see Qualcomm HS-USB QLoader 9008
Unzip the motorola qboot utility and run blankflash.bat
Now Enter into fastboot from your Moto e
You can now flash the firmwares compatible with your bootloader version
Click to expand...
Click to collapse
Is this only for Moto E or all other Qualcom devices? BTW nice post.
Rohit99 said:
Is this only for Moto E or all other Qualcom devices? BTW nice post.
Click to expand...
Click to collapse
Thanks
No but this is only for moto e
Falcon G said:
Thanks
No but this is only for moto e
Click to expand...
Click to collapse
ok got it thanks for the reply
Falcon G said:
Unbrick Your Device
Click to expand...
Click to collapse
Has already someone bricked and unbricked moto e here on XDA? I ask this because someone could try and see if works. With so many official versions this could happen, eventually. My luck I hasn't need do this, but is great information to have around.
Thanks.
Indeed, very helpful thread for moto e
It appears that the blankflash files from the first post is for a Moto G.
Moto E uses a different SOC (Snapdragon 200 MSM8210) and so I doubt the Moto G Programmer and Boot partitions for Snapdragon 400 MSM8x26 would actually work on the Moto E.
skiddd said:
It appears that the blankflash files from the first post is for a Moto G.
Moto E uses a different SOC (Snapdragon 200 MSM8210) and so I doubt the Moto G Programmer and Boot partitions for Snapdragon 400 MSM8x26 would actually work on the Moto E.
Click to expand...
Click to collapse
I'd like to think that the OP tested this himself before posting but anymore on xda you never know..
I may be wrong but I do think the moto g and e both share a diff soc however I "think" they have the same partition layout.
If not people may end up needing to do a few more tricks depending exactly on what the blanflash script/app is actually doing.
Sent from my XT1019 using Tapatalk
Programmer.bin inside blankflash.rar will NEVER work on a Moto E because it was RSA signed using Moto G (first gen) Private Keys.
Inside blankflash has support for 3 types of SOC for Moto G first Gen:
MSM8226
MSM8626
MSM8926
Motorola used different RSA keys for each SOC, that is why you have 3 types of programmer.bin and singleimage.mbn inside...
Moto G (2nd Gen 2014) and Moto E have different private keys used and keys are burned into SOC efuse during pre-production.
I know this because I have actual phones on hand and I am very much familiar with qualcomm 9008 "emergency download" procedure.
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
skiddd said:
Programmer.bin inside blankflash.rar will NEVER work on a Moto E
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
Click to expand...
Click to collapse
Not working and singleimage.mbn fails !!! WHat to do ?
The firmware links are removed can anyone help me?
shashanksetty said:
The firmware links are removed can anyone help me?
Click to expand...
Click to collapse
Is it hard bricked or you can still use FASTBOOT ?
TheDj408 said:
Is it hard bricked or you can still use FASTBOOT ?
Click to expand...
Click to collapse
Hard bricked! I would have flashed something if I could access fastboot:crying:
This is for moto g....
someone provide bootloader for moto e
hard bricked phone after downgrading to kitkat .now it doesnt turns on
arunsai123 said:
hard bricked phone after downgrading to kitkat .now it doesnt turns on
Click to expand...
Click to collapse
Same here :crying::crying::crying:
---------- Post added at 10:36 AM ---------- Previous post was at 10:34 AM ----------
skiddd said:
Programmer.bin inside blankflash.rar will NEVER work on a Moto E because it was RSA signed using Moto G (first gen) Private Keys.
Inside blankflash has support for 3 types of SOC for Moto G first Gen:
MSM8226
MSM8626
MSM8926
Motorola used different RSA keys for each SOC, that is why you have 3 types of programmer.bin and singleimage.mbn inside...
Moto G (2nd Gen 2014) and Moto E have different private keys used and keys are burned into SOC efuse during pre-production.
I know this because I have actual phones on hand and I am very much familiar with qualcomm 9008 "emergency download" procedure.
This will only work once Moto E signed progrmmer.bin will be leaked. For singleimage.mbn, it can be generated easily using a 128mb dump from a working phone via Rooted ADB "dd" commands.
Click to expand...
Click to collapse
Is there any way to recover my phone ?? I can generate dumps from a friend's phone if required :crying::crying: Plzzz help :crying::crying:
now i guess only lollipop firmware files (in .bin,XML,etc format)can unbrick our device
nik007rock said:
now i guess only lollipop firmware files (in .bin,XML,etc format)can unbrick our device
Click to expand...
Click to collapse
Are you sure ? In that matter I can wait !
Related
I buy on Amazon new Motorola G 4G
You think that all customizations, root, recovery etc.. are the same ??
Thank
Hispanico
P.S. For administrator, pheraps is better clarify where modding etc.. can be posted
huh
Wrong forum
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Damn, what did you flash? Seems you're first user reporting hard brick, sorry about that...
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Lol mate. That will happen when you do something which isn't supposed to be done.
.
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Hel.
Click to expand...
Click to collapse
Press volume - and power button and at the same time attach the micro usb cable to your phone. Your phone should boot into bootloader.
Timing is must.
If this doesn't help, then you have to open your phone and disconnect the battery terminals and reconnect them after 1 minute.
Hope this helps.
pankajgavri said:
Press volume - and power button and at the same time attach the micro usb cable to your phone. Your phone should boot into bootloader.
Timing is must.
If this doesn't help, then you have to open your phone and disconnect the battery terminals and reconnect them after 1 minute.
Hope this helps.
Click to expand...
Click to collapse
Well, he said PC recognizes it like Qualcomm something... It reminds me the old hardbricks of moto g 2013 (falcon). I'm still wondering what have he flashed?
Enviado desde mi XT1681 mediante Tapatalk
Yes You Are Right
abeloman said:
Well, he said PC recognizes it like Qualcomm something... It reminds me the old hardbricks of moto g 2013 (falcon). I'm still wondering what have he flashed?
Enviado desde mi XT1681 mediante Tapatalk
Click to expand...
Click to collapse
Yes u are right it's the old Moto g hard bricked type
I flashed also Rom which is meant for Moto z play and this happened plz solve this by searching across internet I found method to flash it using qfil but I need rawprogrammer0.xml and patch0.xml and 3 more similar items for flashing it if any dev can build this it would be so helpful????
And power and volume down doesn't work as u said when I connect for charging or PC LED lights up for about 80-90 times it would be great if any one can help me??
Whoa! I Thought I Was The Only One
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Guys Im First Time Here And Even My Device Is Bricked Because Of Flashing Wroung TWRP And When I Connect My Device To Pc LED Starts Blinking Help Needed Urgently-------------------------------------?
:crying::crying::crying::crying:
Any hard bricked device owner online I maybe help him
Yes
Mandy $ingh said:
Any hard bricked device owner online I maybe help him[/QUOTE
Yes I am always online please help me
Click to expand...
Click to collapse
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
?
????
virajkin said:
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
Click to expand...
Click to collapse
I was looking blankflash for Moto G5 Cedric with no luck. Any ideas? Do they exist?
Enviado desde mi Moto G (5) mediante Tapatalk
Do you have stock rom?
virajkin said:
Download Blankflash for Moto g5 plus (Potter) by @vache from Here
Follow This Steps
Click to expand...
Click to collapse
Where did you got this? How do you know it is for Moto G5 Plus potter????
Just sitting here with popcorn and a banner waiving hoping you bros all get the blissful (hello moto) greeting soon
Moto G5 Plus Hard Bricked
My Moto G5 Plus Dead [Hard Bricked] anyone please help! When I connect Charger/to Laptop only LED light is blinking.
Shamith08 said:
Guys Yesterday I Flashed Wrong Custom Rom On My Moto G5 Plus And Now It Is Hard Bricked Can Anyone Please Help Me
It Does Not Respond When I Try To Press Any Of The Button Cannot Boot Into Bootloader Mode But When I Connect It To My PC
In Device Manager It Is Detecting My Device As Qualcomm Can Anyone Plz Help Me : This Is My First Time Brick I You Guys Have Solution Please Help Me
Click to expand...
Click to collapse
Did you try to run ADB DEVICES at a command prompt at your computer to see if ADB is detecting your device? Like the following image... If the device isn't being recognized, and as you said that the screen isn't turning on, it will be impossible to do anything to fix it...
virajkin said:
download blankflash for moto g5 plus (potter) by @vache from here
follow this steps
Click to expand...
Click to collapse
this worked for me !!! Thank you so much!
Installed LG G5 Rom onto my MOTO G5 !
Guys please help, I thought my mobile was LG G5 but its the Moto G5!
I flashed the LG stock on it and now nothings working!
I carn't access recovery etc.
When i plug the phone into the PC it shows up Under my Computer as
LG Airdrive!
How can i revert back to install the custom rom onto my Moto G5?
Any Help would be apprecited.
Thank You.
can anyone help in bootlooder of moto c plus
bharath parupalli said:
can anyone help in bootlooder of moto c plus
Click to expand...
Click to collapse
same here,...i'm also trying but giving error FAILED(remote:unknown command)
Any solution?
You cannot unlock the bootloader of this device, just like in the Moto C you have to force-flash through memory writing on SP Flash Tool
Hi ,
As we all know that there are a lot fo motorola devices which have got their gpt partition and bootloader corrupted due to some ota update , flashing , wrong flash etc, which reduced their device to a paper weight . Most of them(including me) were unable to reverse the corruption due to the lack of required files . It may take motorola simply 2-3 hours to release these files for almost all devices but they have chosen to stay silent and do nothing . It feels really bad to throw away your phone costing hundreds of dollars due to a minor corrpution which can be fixed easily by Motorola. Its time for us to speak , its time for us to ask for what we deserve . Motorola should listen to us !!
Sign this petition on Change.ORG with as many signs as possible so that we can get our devices back ! Please co-operate .
Maybe this havent happened to you yet but may be it will one day , we all need to come together and ask for what we deserve from Motorola. Sign the petition so that Motorola will hear our voices.:crying::crying:
kawaii.beans said:
Hi
Click to expand...
Click to collapse
-blank-
ayush4261 said:
What is a blank flash file
Click to expand...
Click to collapse
By blank flash files I meant the files required for resurrecting partition and/or bootloader corrupted devices to flash the OS again . As in the process , we only flash the gpt and bootloader via qualcomm emergency download mode (9008 mode) it is callled a blank flash.
I remembered the time when petition for getting android n was signed by more than 2 lakh people but was of no use. Hope this time it works. Good work anyway.:good:
ayush4261 said:
I remembered the time when petition for getting android n was signed by more than 2 lakh people but was of no use. Hope this time it works. Good work anyway.:good:
Click to expand...
Click to collapse
Yes . I remember that too . It was really heartbreaking for us to not to get the android n update thought we were capable of getting it (the g3 and g3te users). How as we know recently , motorola changed their mind and decided to update g4 plus to android O . So therefore if we can put pressure on them , we may be able to get the blank flash files from them . We just need to be together , no matter what if everybody , every motorola user comes forward maybe motorola will have to provide the files that may save thousands of devices.
kawaii.beans said:
Yes . I remember that too . It was really heartbreaking for us to not to get the android n update thought we were capable of getting it (the g3 and g3te users). How as we know recently , motorola changed their mind and decided to update g4 plus to android O . So therefore if we can put pressure on them , we may be able to get the blank flash files from them . We just need to be together , no matter what if everybody , every motorola user comes forward maybe motorola will have to provide the files that may save thousands of devices.
Click to expand...
Click to collapse
BTW don't you think its more of a private stuff that may give its competitors info about its unique product?
ayush4261 said:
BTW don't you think its more of a private stuff that may give its competitors info about its unique product?
Click to expand...
Click to collapse
Maybe , but may be not , we still can hope . Let's just hope.
Add
Found something useful related to this thread: https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
https://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
same for moto x play no blankflash files. . .my life is ruined
Signed ...
it is unthinkable that devices such as the x2 or the g2 that came out in 2014 do not have the blank flash...
kawaii.beans said:
It may take motorola simply 2-3 hours to release these files for almost all devices but they have chosen to stay silent and do nothing.
Click to expand...
Click to collapse
They didn't remain silent: https://forums.lenovo.com/t5/Moto-X-Play/Need-Blankflash-zip-file-for-Moto-X-Play/td-p/3827230
Unfortunatly, to sum up their answer, it's: "You are screwed, lol, buy another phone..."
This answer from a company is only for kicks.
Some models releases the blankflash files but not for moto x 2014 and thiwps is ok.
DONT BUY PRODUCTS FROM COMPANY LIKE MOTOROLA if answer like that..
This is only the right anwer from as to them.
Signed
Just to remember
I prefer to do the following, whenever I see an advertisement for cellphones or any other product of the brand, I say what I have passed warning people never to buy.
i also need blank flash file for moto g6.
Here blankflash flash for osprey!!
Thanks to @vache
https://androidfilehost.com/?fid=4349826312261654609
papsr6 said:
This answer from a company is only for kicks.
Some models releases the blankflash files but not for moto x 2014 and thiwps is ok.
DONT BUY PRODUCTS FROM COMPANY LIKE MOTOROLA if answer like that..
This is only the right anwer from as to them.
Click to expand...
Click to collapse
This is an older thread and older post indeed, but for any interested members, I've amassed blankflash files for several older and newer Moto devices. For clarification, Motorola has never released a blankflash file in the history of their production of smart devices. Motorola states officially that releasing such files would compromise the security of their firmware, and would violate contractual agreements between Motorola and the branded carriers who market Motorola devices. Any blankflash files for Moto devices floating around on the internet were either leaked or were coded by skilled programmers.
For any members needing blankflash files, leave a comment wiry your model number and branded carrier (if any). I'll reply back as soon as possible and, if available, will post a link for the blankflash file.
Viva La Android said:
This is an older thread and older post indeed, but for any interested members, I've amassed blankflash files for several older and newer Moto devices. For clarification, Motorola has never released a blankflash file in the history of their production of smart devices. Motorola states officially that releasing such files would compromise the security of their firmware, and would violate contractual agreements between Motorola and the branded carriers who market Motorola devices. Any blankflash files for Moto devices floating around on the internet were either leaked or were coded by skilled programmers.
For any members needing blankflash files, leave a comment wiry your model number and branded carrier (if any). I'll reply back as soon as possible and, if available, will post a link for the blankflash file.
Click to expand...
Click to collapse
My device is XT 1097
I was buy it from ebay full unlocked (not bootloader) and if remember was from latin america.if you want more information i will be here.
Thank you.
papsr6 said:
My device is XT 1097
I was buy it from ebay full unlocked (not bootloader) and if remember was from latin america.if you want more information i will be here.
Thank you.
Click to expand...
Click to collapse
Okay. I'll look this evening and see if I have that one. It's the Moto X (2nd Gen) Victara, correct?
I have an inconvenience my phone is a xt1641 is dual sim .. when connecting the phone to the pc with twrp appears moto g4 plus ... but when flashing it by any means or with any room it becomes a normal g4 moto bone the footprint no appears or appears to administer and when entering the info of the device it appears that it is normal g4 moto no more ... and in the hardware section the ref xt1641 appears ... with some rooms it does not detect the dual sim and with other yes. .. but it still appears normal g4 moto in any of the cases ... I do not know if you can help me ???
elcfo said:
I have an inconvenience my phone is a xt1641 is dual sim .. when connecting the phone to the pc with twrp appears moto g4 plus ... but when flashing it by any means or with any room it becomes a normal g4 moto bone the footprint no appears or appears to administer and when entering the info of the device it appears that it is normal g4 moto no more ... and in the hardware section the ref xt1641 appears ... with some rooms it does not detect the dual sim and with other yes. .. but it still appears normal g4 moto in any of the cases ... I do not know if you can help me ???
Click to expand...
Click to collapse
Please read/ask here https://forum.xda-developers.com/moto-g4-plus/help/moto-g4-pluss-model-changed-to-g4-lost-t3496912
Thread closed - duplicated as above. Please read/search before posting - thanks.