Related
Q&A for [ROM][PORT][STOCK] TouchWiz Resurrected V1 (Build #2 Added!)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Proximity sensor is working
joshclaudio said:
Hello there sir The proximity is not working while on phone calls. Even when you test it with *#0*#, there is no response when you place your palm over the sensor
Click to expand...
Click to collapse
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
rom
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Badboy Padilla said:
i notice that when i was in built in internet browser when i go to settings of browser and it start blinking, need to fix,
Click to expand...
Click to collapse
same thing happens with me when i open MX player, screen starts blinking with I/O scheduler "null".
sir how to put weather on lockscreen?
help!!!
please tell me where is the option for USB palomiarla, I'll flash another rom and can not find it, thanks.
goldykb said:
I was trying to fix this using adb,
when i put this command
cat /sys/devices/virtual/sensors/proximity_sensor/prox_cal
it replied "no such file or directory"
after then, I INSTALLED PROXIMITY SENSOR FINDER & RUN IT.
IT'S AMAZINGLY WORKING NOW !!!!!!!!!!!!!!!!!!!
https://play.google.com/store/apps/details?id=com.tigermonster.proxfinder
Click to expand...
Click to collapse
I installed the app you have stated, but it's not working for me. How did you made it work?
waiting....
Proximity Sensor not working
Hai NGuyen said:
Proximity Sensor not working
Click to expand...
Click to collapse
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Thank you...
marcussmith2626 said:
You can try flashing my zip below - its one I did for cm7 ages ago however I don't know if it works on stock roms
If not just replace the sensor files with the ones from stock rom
Flash this in cwm with system mounted
http://forum.xda-developers.com/attachment.php?attachmentid=2669398&d=1396684336
Also someone else posted another possible solution a few posts above yours - did you try it or have you even read it?
Click to expand...
Click to collapse
but it's also does not working
Hai NGuyen said:
but it's also does not working
Click to expand...
Click to collapse
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
@goldykb, how did you fix the proximity sensor? Please reply... Thanks
Multi-Window Tab
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Twillight_Sparkle said:
Hello people,
Is there a way to turn off the multi-window tab on the main screen ? Maybe there is a way that I haven't found, would be glad if i can turn it off....
Click to expand...
Click to collapse
Go to Settings > Display. There you can find the option to disable MultiWindow
marcussmith2626 said:
Like I said those were for cm7 - replace with stock sensor files & test
Please don't ask me to provide as I no longer have them
Click to expand...
Click to collapse
Not working too
Sent from my GT-S5360 using Tapatalk 2
help!!!
after flashing, my fm radio, didn't work. help!
mhegz said:
after flashing, my fm radio, didn't work. help!
Click to expand...
Click to collapse
Did you flashed the new build (#2)?
FM Radio is not working in #1 but it is already fixed and implemented in build #2.
Great!
This is a killer ROM
Can you add digital clock widget and s5 wheater clock? There is analog clock only
The S5 lockscreen effect is not same like as the original one hehehe....
And also add swipe to remove and kill task in multitasking
And please add soft key feature like nexus and cm for galaxy y
Emergency Calls Only
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
efisane said:
I flashed the ROM but when I turned on the phone, there was no connection. Also wi-fi does not work. So I restored the previous ROM (MIUI). What can the problem be? Would you help me please?
Click to expand...
Click to collapse
sounds like you are using the wrong kernel - use a stock based kernel and make sure you are using the correct ril file for your baseband kernel combination
Hi there fellow Friends, I am very excited to Inform everyone that UKM now support our Xperia Z1.
After insisting Mr @apb_axel now we have Support for our device.
I am very thankful to Mr @apb_axel that he added our device.
Kindly head over to http://forum.xda-developers.com/showthread.php?p=52319063 for any support or questions.
Please do not ask any Questions Here its not my work, i am just informing everyone, all cradits goes to Mr @apb_axel
Also I will provide instruction to how to get this working on our Z1 -
So what you need:
-Root (obviously)
-Working Busybox
-Your ROM has to support init.d scripts
-Synapse
Click to expand...
Click to collapse
Download Links:
BusyBox
Universal Kernel Manager v3.6.1
Synapse Google Play Link
UKM Uninstaller
To get it working on Our Xperia Z1:
-Install BusyBox
-Does your ROM support init.d scripts?, IF it doesn't or you don't know try this Thread has an App, install it and Check or enable init.d script.
-Reboot in recovery
-Flash the .zip (No cache/dalvik wipe necessary)
-Install Synapse
-You're done!
Click to expand...
Click to collapse
Thanks and Regards
Abhimanyu
Wow thanks for let us know. It's a great app :good
I just uninstalled faux's app but the settings do not stay after a reboot
[Fenix] said:
Wow thanks for let us know. It's a great app :good
I just uninstalled faux's app but the settings do not stay after a reboot
Click to expand...
Click to collapse
Np dude, about Faux i had that problem so i checked for permissions and also uninstalled Faux and Data and reinstalled again now everything working without problem
abbychauhan said:
Np dude, about Faux i had that problem so i checked for permissions and also uninstalled Faux and Data and reinstalled again now everything working without problem
Click to expand...
Click to collapse
Yup faux it's OK, but with synapse I have this Can't set config after reboot
[Fenix] said:
Yup faux it's OK, but with synapse I have this Can't set config after reboot
Click to expand...
Click to collapse
I have the same issue with Synapse.. try asking on Original Thread
abbychauhan said:
I have the same issue with Synapse.. try asking on Original Thread
Click to expand...
Click to collapse
Ya bro I would like just to share my experience here so who will try this are warned. I'm searching for about half-hour on original thread for an answer but nothing. I will post a question asap
[Fenix] said:
Ya bro I would like just to share my experience here so who will try this are warned. I'm searching for about half-hour on original thread for an answer but nothing. I will post a question asap
Click to expand...
Click to collapse
Hi there are you on DARKCM? init.d script setting giving error, seems this related. D u have the same?
Works fine here will try to re install asap
(Oh yes same ROM bro)
[Fenix] said:
Works fine here will try to re install asap
(Oh yes same ROM bro)
Click to expand...
Click to collapse
Hi man. Ru still using UKM? Can u tell that u have this GPU Freq Seekbar error?
abbychauhan said:
Hi man. Ru still using UKM? Can u tell that u have this GPU Freq Seekbar error?
Click to expand...
Click to collapse
Hi my frined,
Sorry but I haven't the phone with me.
It's at assistance because of vibration issue, since 24 november (yes, I'm lost without my lovely z1 :crying.
When it comes back, I will root/UB and all the things, and then I will test the new version of UKM :fingers-crossed:
I will let you know asap :good:
[Fenix] said:
Hi my frined,
Sorry but I haven't the phone with me.
It's at assistance because of vibration issue, since 24 november (yes, I'm lost without my lovely z1 :crying.
When it comes back, I will root/UB and all the things, and then I will test the new version of UKM :fingers-crossed:
I will let you know asap :good:
Click to expand...
Click to collapse
Ok thanks man. BTW newest update of UKM is running good.
abbychauhan said:
Ok thanks man. BTW newest update of UKM is running good.
Click to expand...
Click to collapse
Hey friend, yes I confirm same problem under GPU settings.
Wich Rom are you using?
[Fenix] said:
Hey friend, yes I confirm same problem under GPU settings.
Wich Rom are you using?
Click to expand...
Click to collapse
Im using Slimkat. Well apb_axel got the issue it was wrong path for the Seekbar it will be resolved soon and TAP 2 WAKE setting also
abbychauhan said:
Im using Slimkat. Well apb_axel got the issue it was wrong path for the Seekbar it will be resolved soon and TAP 2 WAKE setting also
Click to expand...
Click to collapse
Nice to see this! :good:
I see also some missed things under vibration, bootloader status...
I'm on slimkat too :highfive:
Do you mind if i ask you to share your setting of UKM? I see your post about battery life on slimkat thread, quite impressed
[Fenix] said:
Nice to see this! :good:
I see also some missed things under vibration, bootloader status...
I'm on slimkat too :highfive:
Do you mind if i ask you to share your setting of UKM? I see your post about battery life on slimkat thread, quite impressed
Click to expand...
Click to collapse
Well Bootloader Locking and Unlocking will not work we know as its not just possible via script. Also Vibration thing has to be done via Kernel Level as if Kernel support then only App can do as its Global App so few things we will miss. I ll post my settings soon.
Settings Screenshots - Not much but I know someone can do batter Settings
Settings Screenshots - Not much but I know someone can do batter Settings
Also I have done Edit to OP Also for how to get it working on Z1. [emoji6]
@abbychauhan
Hey friend
Have you ever tried this tool with stock based kernel?
I'm asking because every time I tried with trinity kernel 3.0 the phone it's extremely laggy (it's not a config problem because I used also the stock one)
[Fenix] said:
@abbychauhan
Hey friend
Have you ever tried this tool with stock based kernel?
I'm asking because every time I tried with trinity kernel 3.0 the phone it's extremely laggy (it's not a config problem because I used also the stock one)
Click to expand...
Click to collapse
Never tried with stock
Anyone else got a problem where the voltages would jump to 1150mV for every frequency If they use this app? Running Dstrikers 4.7 with trinitykernel 3.0. (Stock based Rom) Everything else works fine though
Tried wiping the apps data and deleting the folder which fixes it for a bit but then it must happens again.
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
The kernel worked on my G925F variant. Flashed via flashify. Thanks OP!
So I need to keep the stock kernel?
Sent from my SM-G925F
skivnit said:
So I need to keep the stock kernel?
Sent from my SM-G925F
Click to expand...
Click to collapse
the kernel has the fix in it..
I have downloaded a backup from my firmware to be safe..
BTW..not tripping Knox with this method..
on a side note..the newest Vodafone firmware that was posted here..does not contain this fix.. lol
OK thanks for the info, already tripped my Knox but I don't want a stock kernel
Sent from my SM-G925F
Alex-V said:
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
Click to expand...
Click to collapse
--- Please delete ---
skivnit said:
OK thanks for the info, already tripped my Knox but I don't want a stock kernel
Sent from my SM-G925F
Click to expand...
Click to collapse
..so it would be nice to know if Samsung pushed source for this kernel ?
Alex-V said:
..so it would be nice to know if Samsung pushed source for this kernel ?
Click to expand...
Click to collapse
Probably not that soon :crying: They never share the sources for their current kernel
mythos234 said:
Probably not that soon :crying: They never share the sources for their current kernel
Click to expand...
Click to collapse
mmmhh..the hope dies last ... :angel:
htc had around 90 days deadline
would be nice...as i think i want root again ..want make again a rom...for kernels i must flash ubuntu again...(had an update problem..since then its no more boot correct)..also want to try your kernel
Alex-V said:
mmmhh..the hope dies last ... :angel:
htc had around 90 days deadline
would be nice...as i think i want root again ..want make again a rom...for kernels i must flash ubuntu again...(had an update problem..since then its no more boot correct)..also want to try your kernel
Click to expand...
Click to collapse
Hahaha, thanks Ubuntu can be a giant pain too. Better wait for my new update :angel: And please make the rom, I'm excited already
Alex-V said:
Hello all,
...as i had the night clock Display Problem..i was searching to find a way to fix it...
...all you need is the firmware: G925FXXU1AOD4_G925FOJV1AOD4_KSA
i have repacked it to only flash system and boot from it...works on my no carreer G925F
..use odin to flash it:
https://www.androidfilehost.com/?fid=23991606952600627
md5.: 34105FB3070FB9BB78A057DDC424753E
..or simple the kernel (boot) from it...but it will give you a error in smart switch mobile ..if you want ignore the error than it works also)
http://sourceforge.net/projects/ale...y_S6_Edge/boot_fixed_night_clock.tar/download
...now have fun again
BTW..I'm not responsible for any problems
Click to expand...
Click to collapse
thanks
Do we really need a new thread? I can update the op of old o e to fixed if you want.
http://forum.xda-developers.com/showthread.php?t=3081048
brar.arsh said:
Do we really need a new thread? I can update the op of old o e to fixed if you want.
http://forum.xda-developers.com/showthread.php?t=3081048
Click to expand...
Click to collapse
sure you can do (with credits) ..I also posted the link of the thread in your thread..wasn't sure if you still on board with the problem..anyway now the thread is open ?
just want to confirm, file is 3.3gb?
beda_boy said:
just want to confirm, file is 3.3gb?
Click to expand...
Click to collapse
yeah..that's the one with system inside..you check if you correctly download with md5
this may be a long shot but will this fix work for verizon. im 99% sure it will not huh =/
dluxx06 said:
this may be a long shot but will this fix work for verizon. im 99% sure it will not huh =/
Click to expand...
Click to collapse
also don't think so..
I haven't used night clock overnight, how does it impact the battery? currently, with deep sleep, I lose 0% batt 7 hrs overnight
I really want to try flashing the kernel version but am a bit weary of the results. There might be some sensors especially pertaining to the camera and even overall performance that might get affected or may become erratic.
gyxter said:
I really want to try flashing the kernel version but am a bit weary of the results. There might be some sensors especially pertaining to the camera and even overall performance that might get affected or may become erratic.
Click to expand...
Click to collapse
that's why it's good if you download your actual firmware also (as backup) so you can go back if there are problems.. ?
Hi,
Infos : there is 2 Hidden Menu :
1- tap on dialer : *#*#4636#*#* --> Menu test
2-tap on dialer : *#*#46360000#*#* --> Settings plus
Just great the second hidden menu, that what i was looking for.:good:
Unfortunately I believe it's just for stock ROM, on CM13 isn't working.
Tdjee said:
Just great the second hidden menu, that what i was looking for.:good:
Click to expand...
Click to collapse
What are those for?
Amowagou said:
What are those for?
Click to expand...
Click to collapse
On the background the phone keeps regulate the apps. For me was the problem the push notification. With the bidden settings, i could disable the last function. Now i've No problem any more with push.
See my question in the Forum.
http://forum.xda-developers.com/le-max-2/help/problem-push-notifications-t3511147
Tdjee said:
Just great the second hidden menu, that what i was looking for.:good:
Click to expand...
Click to collapse
Tdjee said:
On the background the phone keeps regulate the apps. For me was the problem the push notification. With the bidden settings, i could disable the last function. Now i've No problem any more with push.
See my question in the Forum.
http://forum.xda-developers.com/le-max-2/help/problem-push-notifications-t3511147
Click to expand...
Click to collapse
Thanks. Would you please advise the effect on the battery life after disabling the background control?
Amowagou said:
Thanks. Would you please advise the effect on the battery life after disabling the background control?
Click to expand...
Click to collapse
I noticed no change, not better, but certainly not worse.
1 day with average use.
two more:
*#*#9439#*#* - enable CDMA
*#*#76937#*#* - several options.
Did someone have troubles with 4g connexion. Sometimes I lose signal and can't do nothing . No internet no call. I rooted my phone with cuoco rom
Dennis_Hawks said:
two more:
*#*#9439#*#* - enable CDMA
*#*#76937#*#* - several options.
Click to expand...
Click to collapse
What these options exactly mean?
One of them is "Enable AT Port" in case if QPST does not see the phone in DM.
The other ones are less important.
Regarding CDMA - you can google.
Hi,
I'm on umbrella CM13 2) doesn't work for me
But i want to know if there is a way to find on which band i'm connected (4G)
I know on Galaxy S4 *#0011# work but not on LeMax2*
thx
kadiatou94120 said:
Did someone have troubles with 4g connexion. Sometimes I lose signal and can't do nothing . No internet no call. I rooted my phone with cuoco rom
Click to expand...
Click to collapse
You must update radio files with last stock ROM, like 21s.
STEVE_MARS said:
You must update radio files with last stock ROM, like 21s.
Click to expand...
Click to collapse
But my phone is rooted with cuocuo ROM , can I update with the last stock ROM? I don't loose root?
kadiatou94120 said:
But my phone is rooted with cuocuo ROM , can I update with the last stock ROM? I don't loose root?
Click to expand...
Click to collapse
Make a TWRP backup of your ROM, install 21s stock rom and after first setup boot, enter TWRP and restore your ROM.
Radio files remain when you restore your backup.
STEVE_MARS said:
You must update radio files with last stock ROM, like 21s.
Click to expand...
Click to collapse
Hi @STEVE_MARS,
Can we flash radio img file(using TWRP) of your 21s ROM on Mokee60.1 ROM on this device?
Or is it not possible?
xuser_ said:
Hi @STEVE_MARS,
Can we flash radio img file(using TWRP) of your 21s ROM on Mokee60.1 ROM on this device?
Or is it not possible?
Click to expand...
Click to collapse
Im not sure, but I think that with Mokee isnt neccesary. My radio files I only use to stock ROMs.
Interesting, but none of them is useful
Hi, my sim 1 does not work anymore for calls, all the rest is fine, any idea how to fix please?
I have a weird looking (not working) charging animation when the phone is powered off and charging since I flashed a particular 7.1 rom. Because I couldn't find anything helpful I ask here on xda: Is it possible to change said animation?
Uhh I think thats related to the kernel, maybe not tho
Nobody?
Pushing one last time, since this is a common problem.
Dranoel18 said:
Pushing one last time, since this is a common problem.
Click to expand...
Click to collapse
You could try flashing stock firmware and see if it fixes it...
latestduo said:
You could try flashing stock firmware and see if it fixes it...
Click to expand...
Click to collapse
Already tried, didn't do the trick. It really is kernel related. I found a rom where it works now (Cosmic OS). It's a shame that there seems to be no option to customize it though. My question was, if you can change it manually.
Dranoel18 said:
Already tried, didn't do the trick. It really is kernel related. I found a rom where it works now (Cosmic OS). It's a shame that there seems to be no option to customize it though. My question was, if you can change it manually.
Click to expand...
Click to collapse
Well, never tried changing it and never actually wanted to.
Good luck with it then
latestduo said:
Well, never tried changing it and never actually wanted to.
Good luck with it then
Click to expand...
Click to collapse
Thanks for trying to help!