Related
My phone is korea's M110s. When I finished one click lag fix V2.2+, I found no vibration on my phone. I use the lastest version 2.30.
Please and thank you.
yxb39 said:
My phone is korea's M110s. When I finished one click lag fix V2.2+, I found no vibration on my phone. I use the lastest version 2.30.
Please and thank you.
Click to expand...
Click to collapse
like wise here but i have G-TAB looking for a fix now
~L()$T~ said:
like wise here but i have G-TAB looking for a fix now
Click to expand...
Click to collapse
Never use OCLF, it's dangerous.
Just flash a kernel containing it, it will give you lots of other advantages too.
mathijs727 said:
Never use OCLF, it's dangerous.
Just flash a kernel containing it, it will give you lots of other advantages too.
Click to expand...
Click to collapse
the thing is i have wifi version P1010 i dont think i can flash it so idk....
Same experience here. I'm thinking whether could this have to do with the firmware?
I remember I used to have KC2, and the vibration feedback was still there (or so I think). Now I have KB5, feedback was gone.
I'm speculating here. Wish I had a copy of my previous firmware to verify.
Sent from my GT-P1010, Android Froyo 2.2.1
same tab same problem
manggagalugad said:
Same experience here. I'm thinking whether could this have to do with the firmware?
I remember I used to have KC2, and the vibration feedback was still there (or so I think). Now I have KB5, feedback was gone.
I'm speculating here. Wish I had a copy of my previous firmware to verify.
Sent from my GT-P1010, Android Froyo 2.2.1
Click to expand...
Click to collapse
dumb question but i am pretty new to these fourms i come from SBHacker.net but i moved to a diffrent set of skills because of my toys HD7, G-tab-p1010,
yes and its not just the tabs phones and so forth have issue to. i think someone needs to get ahold of the developer of OCLF and mention this BUG....
but what is or does the KC2 or the KB5 mean?????
THANKS
Hey, what did you expect.
Has the extended powermenu and crt animation.
Completely stock...
Honestly, I haven't tested it yet so let me know if there's a problem.
Must be on a deodexed ROM before you flash, you can get one here -> http://forum.xda-developers.com/showthread.php?t=1358180
Just copy to your SDCard, have a kernel with CWM installed and flash away. You can get a kernel here -> http://forum.xda-developers.com/showpost.php?p=19246131&postcount=29
As always, I am not responsible if it messes up your phone.
http://www.mediafire.com/download.php?qu3erz2zfk6we6m
http://www.megaupload.com/?d=73VM2D60
thank you
always all over new leaks as usual
Is pretty much everything from KK2 compatible with KK4?
I am thinking many of the mods already done can just be transferred just like they could from KJ3 to KK2.
mattern1974 said:
Is pretty much everything from KK2 compatible with KK4?
I am thinking many of the mods already done can just be transferred just like they could from KJ3 to KK2.
Click to expand...
Click to collapse
There are slight differences, most of it is the same except for a few minor changes and bug fixes here and there.
Oh.Em.Gees, you guys don't waste time. Thanks for this. Time to get to work.
crt60 said:
Hey, what did you expect.
Completely stock...
Honestly, I haven't tested it yet so let me know if there's a problem.
Click to expand...
Click to collapse
lol same goes for my kk4 stock
very busy pretending to work and dev at same time!
Tested, no problem.
Thanks!
Very nice mod. Thanks. Does anyone know why the disable data option has disappeared?
[email protected] said:
Very nice mod. Thanks. Does anyone know why the disable data option has disappeared?
Click to expand...
Click to collapse
They took it out on gingerbread, but it has been added in the the master 9 toggle mod.
Is there a master 9 toggle mod for kk4? I cant seem to find one past kk2.
[email protected] said:
Is there a master 9 toggle mod for kk4? I cant seem to find one past kk2.
Click to expand...
Click to collapse
Fusion and Illuminance, are kk4 with the toggles in them
Any chance of moving this to something other than megaupload?
chasesavestheday said:
Any chance of moving this to something other than megaupload?
Click to expand...
Click to collapse
Updated in OP
hi bors i some days ago i bricked my n4 device now Im having prob. with its display! the buffling point is the problem is only in ui mod and when the android is lunching !
whats prob?! there is some clear white lines among pixels ! it makes my blood boil ! i tried all roms and kernals i could i tried all modems all bootloaders so plz dont give funny answeres
is there any way i can fix it?! if is how?!
saying again the prob is only when os is running
plz answer if possible if there is any possible way to fix it
thakns bros
T-luvR said:
hi bors i some days ago i bricked my n4 device now Im having prob. with its display! the buffling point is the problem is only in ui mod and when the android is lunching !
whats prob?! there is some clear white lines among pixels ! it makes my blood boil ! i tried all roms and kernals i could i tried all modems all bootloaders so plz dont give funny answeres
is there any way i can fix it?! if is how?!
saying again the prob is only when os is running
plz answer if possible if there is any possible way to fix it
thakns bros
Click to expand...
Click to collapse
lines are odd one pixel shows color one shows white or is off
T-luvR said:
lines are odd one pixel shows color one shows white or is off
Click to expand...
Click to collapse
It could be a hardware issue, a faulty device.Have you tried a full factory reset, return to stock and see if the issue still persists:
http://forum.xda-developers.com/showthread.php?t=2010312
22sl22 said:
It could be a hardware issue, a faulty device.Have you tried a full factory reset, return to stock and see if the issue still persists:
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
yeap as i said Ive done all possible software solutions on the net but this occurs onl in ui (os running)
no issue in bootloader or start up
T-luvR said:
yeap as i said Ive done all possible software solutions on the net but this occurs onl in ui (os running)
no issue in bootloader or start up
Click to expand...
Click to collapse
weird it never happened to me , prob hardware issue hope not tho
im4eversmart said:
weird it never happened to me , prob hardware issue hope not tho
Click to expand...
Click to collapse
im stunned too I took it to garenty they told screen has not any prob! there is no burn pixel or etc! till tomarrow if i my self wont be able to fix it ill change screen by my self if it doesnt work ill change all parts till it works :|
what rom are you running?
simms22 said:
what rom are you running?
Click to expand...
Click to collapse
when this occured i was running PA 3.65 now when i posted this thread i was using cm 10.2 09 nightly now im using stock because wanna hard break phone and return to garranty a question how can i hard brick my phone?!
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
TjabbyD said:
Hello xda.
I installed Cyanogenmod on my Samsung Galaxy Note 3 today with no problems at all, however I've found something that seems a bit weird. (I know there is supposed to be bugs in nightlies, of course, but I thought i'd ask anyway.)
In the performance settings of the tab, it keeps the minimum CPU frequency to 1190mhz. If I put it to 300mhz, it will work, but as soon as I exit out of the performance tab, it goes back to 1190mhz. I figured that my phone was quite hot when I didn't use it, and that's how I found out.
Have anyone seen this on the latest CM11 nightly for the Note 3? I hope somebody out there know how I can fix it.
Many thanks.
Click to expand...
Click to collapse
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
jaythenut said:
try set cpu app or use temask kernel found here http://forum.xda-developers.com/showthread.php?t=2687074&page=3
Click to expand...
Click to collapse
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
TjabbyD said:
Thanks a lot for your reply.
I've heard a little about kernels. The thing is, that this is the first time I've ever put a custom rom on an android device, so I'm not really 100% familiar with all this yet, however if the custom kernel won't be able to brick my phone, I sure would give that a try.
Should I go with the "stable" version or the beta version of the kernel?
Click to expand...
Click to collapse
go with beta its very stable just flash with cmw or twrp and dont touch anything
jaythenut said:
go with beta its very stable just flash with cmw or twrp and dont touch anything
Click to expand...
Click to collapse
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
TjabbyD said:
Thank you a lot
I'm taking the beta version then!
- So... I just tried to flash it with Odin, but as it is a .zip file and not .tar, I can't do that.
I do have TWRP on my device, so I can use that, I am not very sure on how to do that though?
I'm sorry for the noobish questions. First time I installed a custom rom
Click to expand...
Click to collapse
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
jaythenut said:
go to twrp then install zip find the kernel press it it will install then reboot should be good to go do a backup just in case
Click to expand...
Click to collapse
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
TjabbyD said:
That sounds amazing!
Thanks for your help man I appreciate it!
So, just to be 100% sure, I am going to download and install the "NEW BETA KERNEL v3.02 b1" Right?
Click to expand...
Click to collapse
yes mate
you should try his rom its one of the best cm roms out there
jaythenut said:
yes mate
you should try his rom its one of the best cm roms out there
Click to expand...
Click to collapse
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
TjabbyD said:
Yeah I've heard a lot about his ROM too, I should have installed that instead of the official nightly, oh well. Perhaps I will soon
I really appreciate your help. On to install the kernel now! Hopefully I will get as amazing battery life as the show
Click to expand...
Click to collapse
you can just flash over the top with out loosing any data
jaythenut said:
you can just flash over the top with out loosing any data
Click to expand...
Click to collapse
Oh really? How?
Just the regular way of installing a rom or?
TjabbyD said:
Oh really? How?
Just the regular way of installing a rom or?
Click to expand...
Click to collapse
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
sembuild articles
jaythenut said:
download rom on your phone flash it with twrp then flash the same gapps with twrp (must be the same gapps or it will factory reset)
thats it done
Click to expand...
Click to collapse
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
TjabbyD said:
That's amazing! I'll see if I will do that soon.
I installed the kernel and everything looks fine, however the performance tab is still acting weird. I think I will install a CPU app.
So this is it? There is no new settings I need to check or anything?
Click to expand...
Click to collapse
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
jaythenut said:
nope dont use performance tab at all use this app if you want to play with this settings
Trickser settings
Eco mode - off
MP-Decision - off
Intelli-plugin - on
Dynamic Fsync - on
Governor - Intelli-demand
Scheduler - row
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en_GB
Click to expand...
Click to collapse
Got everything set up and running now!
Thanks a lot for your help mate! I really appreciate your time!
Now I "hopefully" will have amazing battery life just like the other people in the thread!
[SOLVED] "Unable to connect to camera" or crash after CM installer from 4.4.2 stock
Hello!
After installing CM on my uncle's S4 international LTE through CM installer, all camera apps crashes, saying sometime "Unable to connect to camera". How can I fix this? Actually the phone is with her, and I cannot see it for a while. I tried to restart and or clear cache data, but it didn't worked. Any other known fix? Getting back to stock would just be a shame!
SUMMARY: I've tried CM Installer, CM11M3 and CM11M9, and in none of them Google Camera works, even with the this app that elzangi adviced me. BUT i've tried this app and it does not works :|
SOLUTION: Reflash stock, reflash all the things. F**k you Samsung
Do a wipe data/factory reset from the recovery.
Lennyz1988 said:
Do a wipe data/factory reset from the recovery.
Click to expand...
Click to collapse
done just now, nothing changed
Up!
Get a look at this, try it!
https://play.google.com/store/apps/details?id=com.billgbennett.camerafix
elzangi said:
Get a look at this, try it!
https://play.google.com/store/apps/details?id=com.billgbennett.camerafix
Click to expand...
Click to collapse
Tried with latest CM stable from Installer, but nothing It does not even open. Now i've flashed the M3, but still the camera isn't working. Now i will try the app you linked me on this M3... Let's see
EDIT: does not work even on M3... HALP PLS!
EDIT: now i'm going for the M9, i don't think it will change something, but at least i'll have the latest CM
EDIT: It seems that only google and AOSP cameras crashes... the 3rd party apps works... that's really odd
Lamba92 said:
Tried with latest CM stable from Installer, but nothing It does not even open. Now i've flashed the M3, but still the camera isn't working. Now i will try the app you linked me on this M3... Let's see
EDIT: does not work even on M3... HALP PLS!
EDIT: now i'm going for the M9, i don't think it will change something, but at least i'll have the latest CM
Click to expand...
Click to collapse
Yes flash the M9 and tell us.
Tkkg1994 said:
Yes flash the M9 and tell us.
Click to expand...
Click to collapse
Still not working But as said in the summary, other apps do. I don't know if it is due to M9, but the 3rd party apps i could do photos!
Lamba92 said:
Still not working But as said in the summary, other apps do. I don't know if it is due to M9, but the 3rd party apps i could do photos!
Click to expand...
Click to collapse
But in stock it worked all the time?
Tkkg1994 said:
But in stock it worked all the time?
Click to expand...
Click to collapse
Yes of course! I exclude an HW issue, infact other camera apps works...
Lamba92 said:
Yes of course! I exclude an HW issue, infact other camera apps works...
Click to expand...
Click to collapse
Go back to stock software is an option or not?
Tkkg1994 said:
Go back to stock software is an option or not?
Click to expand...
Click to collapse
Of course it is possible, but i don't want to get back to the laggy TW.
Lamba92 said:
Of course it is possible, but i don't want to get back to the laggy TW.
Click to expand...
Click to collapse
Shall I tell you what makes your phone really lagg free? Install the latest firmware from samsung, root it, flash the http://forum.xda-developers.com/showthread.php?t=2741181 kernel. and than install SD Maid. Go to applications and begin to remove samsung stuff. Like widgets who are running in background but you never use it, or chaton, all Knox things, WatchOn, Daemon weather and so on! my phone is fast as it never was without root
Tkkg1994 said:
Shall I tell you what makes your phone really lagg free? Install the latest firmware from samsung, root it, flash the http://forum.xda-developers.com/showthread.php?t=2741181 kernel. and than install SD Maid. Go to applications and begin to remove samsung stuff. Like widgets who are running in background but you never use it, or chaton, all Knox things, WatchOn, Daemon weather and so on! my phone is fast as it never was without root
Click to expand...
Click to collapse
That's true, but at this point why don't just change rom (cyanogenmod installer was 1 click!)? By the way, it's a good point, i'll just try to find a fix to this problem, if i won't find one, i'll do what you suggested!
Lamba92 said:
That's true, but at this point why don't just change rom (cyanogenmod installer was 1 click!)? By the way, it's a good point, i'll just try to find a fix to this problem, if i won't find one, i'll do what you suggested!
Click to expand...
Click to collapse
1. It's because I like some Samsung things like multi window etc.
2. I like the surface of Touchwiz
3. The camera is way better in Touchwiz than in CM.
If you don't find a fix, I think this would be the best you can do, if you don't hate touchwiz to hard
Please click thanks if I help you:fingers-crossed:
Tkkg1994 said:
1. It's because I like some Samsung things like multi window etc.
2. I like the surface of Touchwiz
3. The camera is way better in Touchwiz than in CM.
If you don't find a fix, I think this would be the best you can do, if you don't hate touchwiz to hard
Please click thanks if I help you:fingers-crossed:
Click to expand...
Click to collapse
Unfortunately, i hate it with all of my hearth! By the way thanks
Lamba92 said:
Unfortunately, i hate it with all of my hearth! By the way thanks
Click to expand...
Click to collapse
hahah
If it's so bad, try if it really works on stock firmware, if not.. really don't know, if yes try it again with CM but not with the installer, but with flashing the M9 file in the recovery. So I think you have to do something xD
Tkkg1994 said:
hahah
If it's so bad, try if it really works on stock firmware, if not.. really don't know, if yes try it again with CM but not with the installer, but with flashing the M9 file in the recovery. So I think you have to do something xD
Click to expand...
Click to collapse
I don't think i will find any other viable solution, may i ask you a little guide to create a clean TW?
Lamba92 said:
I don't think i will find any other viable solution, may i ask you a little guide to create a clean TW?
Click to expand...
Click to collapse
Of course you can. I installed the latest samsung firmware (NG8) and than rooted it. After that I installed SD Maid Pro, gave him root access and than remove a lot of stuff which runs in the background (but attention, just things from samsung and google you don't need, otherwise some things wont work anymore..)