Related
I've had the captivate about 24 hours now and dig it. I've rooted it and remove the att bloatware (per titanium backup), I've also performed a backup using Rom Manager.
I'm having trouble getting it up and running on an enterprise wireless what uses 802.1x PEAP authentication. I can get through all the auth. steps, and the device is assigned an IP, but I am unable to do anything that requires an internet connection; browser, market, etc.
Has anyone else ran into this issue?
*****EDIT*****
sigh i just realized that this is in the wrong area, it should have been over in development...i'm an idiot
I had a similar problem on a WEP-encrypted network, which I fixed by setting a static IP on the phone and then setting it back to DHCP (the correct setting). However, your problem could be entirely different than mine (not that I even am sure what my problem was, just that I fixed it!)
Best of luck!
Having the same problem on enterprise access points regardless of encryption. Home wifi netwroks work great (open and WPA2). Enterprise APs (open and WEP) connect and give me an IP, but will not transfer data. Think its a driver issue with the Wifi, it happens on every captivate ive tested, and seems to be more widespread than the GPS issue.
I have had the same issue with my work at work. I can get it to connect and get a ip but can not pass any data.
Sent from my SAMSUNG-SGH-I897 using XDA App
Had the same problem at work. Luckily I'm an admin and figured mine out. Our monowall portal was the issue. I can give a detailed answer for my problem tomorrow when I get to work.
I actually had the cap wiped to go back, then I literally figured out the problem. Thanks go out to my team mate for helping me talk through this.
Sent from my SAMSUNG-SGH-I897 using XDA App
can't wait to hear what your fix was!
Sent from my SAMSUNG-SGH-I897 using XDA App
This sounds more like your network not being allowing your device rather then the device having an issue.
it's been frustrating as I know two other guys with android devices that didn't have an issue. one is a droid eris running 2.1 and the other is a nexus one running 2.2.
Sent from my SAMSUNG-SGH-I897 using XDA App
designgears said:
This sounds more like your network not being allowing your device rather then the device having an issue.
Click to expand...
Click to collapse
Worked closely with my highly experienced network admin in my dept. for an afternoon (we had some time to kill). He checked the firewall and dhcp servers, ran packet traces, etc.
With what I'm experiencing, its the device. These wifi networks we use with Cisco APs are completely wide-open. All other phones and mobile devices have always worked great for years. We rely on this network for many custom applications and mobile tools.
Once the dhcp server leases an address, it seems like the radio stack hangs, and the device ceases communication. Here's an older thread on the exact issue over at androidfouroms: http://androidforums.com/samsung-captivate/130403-wifi-terrible.html
I have tested multiple new unmodified captivates and the issue is identical accross the board.
Now that I am at work, and have coffee in me and not beer, I will go through the problem I had with miCap and works wireless. Due to my skeptical ways, I will be semi vague for security purposes. On with it.
When I originally got miCap (pet name for it) I was able to access our public wifi. It allowed me into the public portal to agree to terms. I played a little bit on it, but wanted to see if I could access our private wifi. I got in the private no problem. But after that I never was able to get back on to our public. It did the same thing as I've read. It got an ip no problem (via dhcp) and acted like all was well. No browser, or ap could get a connection. The phone would not switch over to 3g to get info.
Armed with ip and mac address, my co-worker and I started to did through our monowall. ( He also has a cap that had no issues on public or private). We try tried reserving the ip for miCap, didn't work. We tried static ip, didn't work. I spent the morning completely wiping miCap to get it back to return worthy.
This was when I decided on last ditch effort.
Our ap's are cisco's that connect into monowall. I got into monowall and dug around. I found that with in the captive portal (how fitting) that the ip/mac associated with my phone hadn't checked in for 8 days. Even though I tried everyday. I deleted the entry to the phone there and suddenly my phone was getting access again.
Now I understand that this may not help everyone, because setups vary from place to place. But digging deeper into configurations at the access points may be what is needed. Do I think the phone had nothing to do with it? No, I think it helped aggravate the problem.
We have had problems with the Intel 3945abg chipsets with the same exact setup. That problem was fixed with driver updates on the laptops.
sorry for the long winded reply.
So in a nut shell you deleted the DNS entry for that ip/mac in the firewall and you are working.
Pmac25 said:
So in a nut shell you deleted the DNS entry for that ip/mac in the firewall and you are working.
Click to expand...
Click to collapse
Essentially yes. But it is not listed like that in the portal. Hmmm. I wonder about the combo of dhcp/dns being the culprit.
I was able to resolve this issue by changing my connection settings from DHCP to static for the Cisco APs.
Installing WiFi Buddy from the market allowed me to access these connection settings.
I just used an address from our static IP pool.
Manually set IP, subnet, gateway, and DNS, and now im finally rolling on our enterprise wifi network
I sent a help ticket into samsung; maybe if enough folks do we can get it on their radar.
jhannaman82 said:
I was able to resolve this issue by changing my connection settings from DHCP to static for the Cisco APs.
Installing WiFi Buddy from the market allowed me to access these connection settings.
I just used an address from our static IP pool.
Manually set IP, subnet, gateway, and DNS, and now im finally rolling on our enterprise wifi network
Click to expand...
Click to collapse
you can set the ip manually with out an app. When on the wifi screen, hit menu-advanced. This is a good time to set the wi-fi sleep policy also.
phlunkie said:
you can set the ip manually with out an app. When on the wifi screen, hit menu-advanced. This is a good time to set the wi-fi sleep policy also.
Click to expand...
Click to collapse
Thanks for that, i figured the menu was built in somewhere just never found it.
:thumbsup:
UPDATE
So I flashed the i9000 Eclair rom last night, and when I got into work today I can connect and use the wifi here. So looks like something AT&T buggered up, big surprise there, when they "customized" the captivate.
As much as I normally love blaming AT&T for problems, that can't be done here. My Captivate (running Stock Firmware) connects just fine to my work network. We use 802.1x with PEAP/MSCHAPv2 for authentication.
Anyone been able to connect at over 802.11b speeds while connected to an 802.1x network? I show connections at G and N speeds on my WPA2 network but nothing over 11Mbps on 802.1x.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi,
I am also having problems with my work wifi network.
It is 802.1x, on TTLS/PAP it also requires a thawte premium server ca certificate insalled.
Is there any way to connect this kind of networks?
With my previous iphone 3g it was taking only 4-5 seconds.
My Tab is brand new from Staples bought yesterday. After unpacking and charging,
wi-fi won't connect to my Verizon DSL wireless router. The Tab has v3.0.1 software.
I've read about plenty of wi-fi issues with the 3.1 upgrade, but, are there know issues with v 3.0.1 software.
I am looking for suggestions and help. Thanks
jostarr said:
My Tab is brand new from Staples bought yesterday. After unpacking and charging,
wi-fi won't connect to my Verizon DSL wireless router. The Tab has v3.0.1 software.
I've read about plenty of wi-fi issues with the 3.1 upgrade, but, are there know issues with v 3.0.1 software.
I am looking for suggestions and help. Thanks
Click to expand...
Click to collapse
a little more info might help, like what the wifi does, does it just join, but just says remember, or does it not find at all, or does wifi say error completely??
jakomo73 said:
a little more info might help, like what the wifi does, does it just join, but just says remember, or does it not find at all, or does wifi say error completely??
Click to expand...
Click to collapse
Thanks for your reply.
I never got connected. It says trying to obtain an IP address, or something like that. I also tried several resets using the paper clip procedure to no avail.
And is your router secured with a key? If so, were you prompted to add it before trying to connect? Did you add it correctly?
gammaRascal said:
And is your router secured with a key? If so, were you prompted to add it before trying to connect? Did you add it correctly?
Click to expand...
Click to collapse
It never asked for the password because it never got an IP address assigned to it.
jostarr said:
It never asked for the password because it never got an IP address assigned to it.
Click to expand...
Click to collapse
It can't get an IP address unless it has the WEP key to connect to it.
I take it your router isn't secured then.
Or maybe it's different for DSL *shrug* I don't know.
gammaRascal said:
It can't get an IP address unless it has the WEP key to connect to it.
I take it your router isn't secured then.
Or maybe it's different for DSL *shrug* I don't know.
Click to expand...
Click to collapse
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.
jostarr said:
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.
Click to expand...
Click to collapse
Take it back and exchange it.....
my first one had wifi issues as well... hardware issue.
jostarr said:
I may be wrong, but I think it must first have an IP address assigned to it by the router. Then, you must give the password to get connected.
That's how it works for my laptops and iPod Touches.
Click to expand...
Click to collapse
I don't know. That might very well be a "DSL" thing. But in order to connect to a wireless router (which has been secured with a WEP key) one must first add the WEP key to the device then, and only then, will the device be able to connect - not the other way around.
Don't confuse 'password' with 'WEP key'. While their job is similar (preventing unauthorized users from connecting) the lack of a WEP key prevents connection, period, while a password requires a connection first.
But like I said, for DSL routers, maybe it's different - the only thing I can think of would be for you to log into your router from your laptop/desktop and check the wireless settings to see if it is indeed secured with a key - if so, write it down and try again from the tab, making sure that you input the key before it tries to connect.
Of course it *could* be a hardware issue. but it sounds to me like you're missing something.
gammaRascal said:
I don't know. That might very well be a "DSL" thing. But in order to connect to a wireless router (which has been secured with a WEP key) one must first add the WEP key to the device then, and only then, will the device be able to connect - not the other way around.
Don't confuse 'password' with 'WEP key'. While their job is similar (preventing unauthorized users from connecting) the lack of a WEP key prevents connection, period, while a password requires a connection first.
But like I said, for DSL routers, maybe it's different - the only thing I can think of would be for you to log into your router from your laptop/desktop and check the wireless settings to see if it is indeed secured with a key - if so, write it down and try again from the tab, making sure that you input the key before it tries to connect.
Of course it *could* be a hardware issue. but it sounds to me like you're missing something.
Click to expand...
Click to collapse
If it says it is still waiting for an IP address, I can't type anything in....WEP key or password. I may have not been clear with the problem. It "sees" my router, but is constantly trying to obtain an IP address. Sorry for the confusion.
There's no confusion. Of course it will see your router if the router is broadcasting its SSID. That still doesn't mean you *can* connect to it.
Log into your router and check if your wireless is secured with a key. If it is, then you need to add it to your tab *before* it can get an IP address. I can't be any clearer about that.
gammaRascal said:
There's no confusion. Of course it will see your router if the router is broadcasting its SSID. That still doesn't mean you *can* connect to it.
Log into your router and check if your wireless is secured with a key. If it is, then you need to add it to your tab *before* it can get an IP address. I can't be any clearer about that.
Click to expand...
Click to collapse
Ok, thanks. I know the WEP key. But I don't low how\where to enter it into the Tab. I would appreciate it if you could post step by step instructions. Up till now, I have been trying to follow what the Acer manual pdf says:
"If you did not connect to a Wi-Fi network when you first started your tablet, or want to connect to a new network, tap Apps > Settings > Wireless & networks to manage your connection settings. Alternatively, tap the Wi-Fi status icon in the bottom-right corner of the screen.
If Wi-Fi is not on, tap Turn on Wi-Fi, and wait for your tablet to detect nearby networks. Tap the name of your network and enter a security password, if needed."
Right. Click on the network, add the WEP key where it says 'password'.
I'll try it later when I get home from work and will post my results. Thanks for you help.
What you're doing sounds strange. I too have a DSL router, but it works no different than any other router I've ever had. I've had several Android devices including tablets, and they all work the same. When you try to connect to a protected network, it will prompt you for a password. It cannot obtain an IP without the password, this step occurs after the password verification.
I have had issues where my remembered networks just sometimes sit at "Obtaining an IP address...", and never connect. Usually a reboot solves this problem. I tend to have more issues with WPA networks than WEP, but almost nobody uses WEP anymore.
But, there really shouldn't be a trick to it. Click on the network and it will prompt you for a password (WEP or WPA, works the same). If you've already done this, try rebooting.
I've never had the experience that jostarr has, where I needed to enter a key before a password.
Otherwise, like one of the other posters stated, it could be a hardware issue.
Problem solved.
I tried the Factory Reset from the settings menu. It took a few minutes to reset and reboot. A s soon as I went to the Wi-Fi settings, it found my router, got great signal strength, and was asked for my password. It then connected immediately.
I then went to settings, and looked for any updates. It found the latest update, so I downloaded and installed OS v3.1. It took about 1 hour to complete the download and installation. My tab works great now. I could not be more pleased with it.
Many thanks to all on this forum and elsewhere who contributed their suggestions and advice.
congrats on solving your issue Jostarr. I'm happy you got it worked out.
Honestly I have no idea why this is happening on my android 4.0+ devices. I will get stuck on obtaining IP address connecting to certain networks and the only thing that worked for my home network is static IP. But for instances when I don't have access to the router to know what the static IP should be, is there a way to get this working? This happened on my phone as well. I was at a local cafe which had wifi and before I upgraded my samsung galaxy s2 to ICS, I could connect to their wifi no problem, now it has the same issue, and so does my Nexus 7. I don't know what to enter for static IP, I entered some random IP, it connected but internet still didn't work. Why is this problem plaguing ICS onward, and does anyone have a workaround when static IP is not an option?
This is definitely not a universal problem (I've never heard of it before). Are you running stock roms? If not, then do you have these problems with stock roms?
C2Q
Why are you posting this to multiple threads?
There is no "proper way" to use a static IP for a router that is setup for DHCP only. For routers that use both, many times the static IP's are reserved for specific devices.
Sent from my Nexus 7
Because I didn't notice the other thread before I posted this one. Anyway then why is this obtaining IP address loop a problem on ICS? As I said, my phone on GB would manage to connect/obtain an IP address just fine before I upgraded to ICS. This happened with my home router and other areas as well. The solution that worked for me at home was to assign a random static IP within my routers IP range. But if I don't know the gateway IP this won't work. So what gives? I'm kind of confused what you mean by routers set up for DCHP only. If I use static or DCHP options on the android device to connect, they will both work (this was before ICS).
I ran into similar issues with my nexus 7 and my work open wifi. It needs you to connect to a web login page where you accept a use policy before you can surf. My nexus would connect but never redirect to that login page.
The issue was resolved by using static IP instead of DHCP and also by changing the DNS values to DNS1 8.8.8.8 and DNS2 4.4.8.8
Changing those settings lets me finally use my work wifi. My phone also has the same issue (its an ICS phone, whilst the nexus is jelly bean) but is not resolved with this change.
Sunburn74 said:
the issue was resolved by using static IP instead of DHCP and also by changing the DNS values to DNS1 8.8.8.8 and DNS2 4.4.8.8
Click to expand...
Click to collapse
Sure that is not 8.8.4.4 ?
Thanks for posting this question. I have exactly the same problem with my Samsung S3 (ICS) and Nexus 7 (Jellybean). My old Samsung S2 (Gingerbread) worked fine.
I am trying to connect to a hotel open network. When I try I get the looping "Obtaining IP..." message. I have a strong network signal.
What gives? How come earlier versions of Android worked but later ones don't?
As the OP stated, the static option works insofar as I can then connect to the network but the made up static IP numbers do not actually let me download (or upload) data. As the OP wrote, you need to know some valid values for the static IP setting.
Does anyone have a solution for this (apart from downgrading to Gingerbread)?
Ive always had this issue but my home router has dhcp off. A majority of routers start with 192.168.1.1 or 192.168.1.2 so its not hard to work it out.
BT routers always start with 192.168.1.254 so there's another option dunno why my devices do it but im used to it. My Wifes Xoom 2 and wildfire S are stock and do not have the issues my rooted ones do but i have just put it down to coincidence
First off. Is your modem in service? Do other devices connect? Have your restarted your tab? Does it connect to other networks? Meaning going to another WiFi hotspot If you can answer yes to all of these questions we move on....
What modem/router are you connecting to?
What type of WiFi encryption are you using? Wep-open, WPA, wpa2-psk
On the tab does it fail to obtain the IP address? Meaning it says "remembered"?
Not going to lie more the 3/4ths of the time you have the wrong WIFI PASSWORD. CHECK IT AGAIN usually its on the modem/router or if you have no clue here is a hint: on windows vista and windows 7 under control panel>network and sharing center>manage WiFi networks if your right click on the network name such as "Ilovepancakes"and go to properties it will have a security tab that you can click on and show password.
Sent from my Nexus 7 using XDA Premium HD app
bonesy said:
Ive always had this issue but my home router has dhcp off. A majority of routers start with 192.168.1.1 or 192.168.1.2 so its not hard to work it out.
Click to expand...
Click to collapse
I don't know what you mean. Do you mean that I should try these numbers to see if they work? You need a number of values to set up static IP addressing to work.
Did you dirty-flash your Nexus? A while back my Gnex wifi connections would take longer to complete the handshake. I did a factory reset/fresh install & it has been much faster.
strongergravity said:
Did you dirty-flash your Nexus?
Click to expand...
Click to collapse
My Nexus (and GS3) is completely stock (I have only added a launcher).
This problem seems to be caused by older routers, which don't seem to like something about newer versions of Android.
I'm not sure if it's something Google can fix, but the combination of old router and new Android seems to make logging onto wi-fi networks a problem.
Bump.
Ive been struggling with this problem for a week now since getting a transformer infinity. My s3 gets stuck when I try to connect to it. The tab cycles through connecting, obtain a valid address and saved.
I bought a new 32gb nexus yday and had this issue. I entered advanced settings, changed dhcp to static. Changed IP addy to 192.168.1.1 and it worked fine. Only had to do it once. After that it connected to every network fine without changing settings again.
Sent from my Nexus 7 using xda app-developers app
Warrior1975 said:
I bought a new 32gb nexus yday and had this issue. I entered advanced settings, changed dhcp to static. Changed IP addy to 192.168.1.1 and it worked fine. Only had to do it once. After that it connected to every network fine without changing settings again.
Click to expand...
Click to collapse
This worked for me also (Infuse 4G on JB), but it seems like this is only a problem on WiFi AP's that have marginal signal strength, even though they appear to have full bars. I personally have never have seen this issue on a network that was performing properly.
Same here!
Same thing is happening to me! Im using he htc desire c running ics.. my phone detects the wifi network, shows that it has excellent strength, but it gets stuck at "Obtaining IP Address"! My friend and I both bought the same model a couple of weeks earlier and till now neither of us have been able to connect to a wifi network! Please Help!!!
its a DHCP bug
This is probably not a problem with your network configuration unless it works everywhere else; im having the same problem as well as other people i know and its definitely a bug with DHCP, so the only way to work around this is by using a static ip as far as i know
bobbyelliott said:
I don't know what you mean. Do you mean that I should try these numbers to see if they work? You need a number of values to set up static IP addressing to work.
Click to expand...
Click to collapse
What he's saying is that most routers will begin assigning addresses starting with 192.168.1.1 or 192.168.2.1 for itself (you can access the router configuration page by typing in this address into a web browser), and then increment upwards afterwards. If you knew that the router started its DHCP addressing with 192.168.1.1, for example, you could try 192.168.1.2, and so on and soforth.
If you did a "dirty" upgrade, I'd recommend doing a factory wipe (after an appropriate backup-- there are some good apps out there that can handle this). In-place OS upgrades have a bad habit of being finicky. Android is also generally less tolerant of network "misconfigurations" than, say, Windows, OS X, or iOS. Many networks that use captive portals (your standard coffeeshop Wi-Fi) deliberately use an altered network setup to support their access policies, such as a captive portal.
However, with the exception of corporate/enterprise networks (which may require fine-tuning because of increased security), you really shouldn't be messing around with this if you don't have at least a rudimentary understanding of how networking works. That's not meant to be insulting, but when people plug in random values and find it doesn't work, it tends to lead to more frustration than utility.
(fyi: The reason you can "connect" by tossing in a random set of octets your your IP and DNS is because you've properly authenticated against your router, but you'll never be able to receive data unless your router's DHCP lease lines up with your self-assigned IP, because the router never handed that address out to you. It's the digital equivalent of building a mailbox in front of your house without registering with the post office, and wondering why you never get mail).
There appears to be a problem with new versions of Android and old routers. Many people have reported the "obtaining IP address" loop problem.
Let me explain. I use the leisure facilities in a local hotel. It has a public (open) wifi network. I believe it uses an old router. My Galaxy S2 (Gingerbread) and AsusTransformer (ICS) both connected to this network without problems. I recently replaced the S2 with an S3 (ICS) and my Transformer with a Nexus 7 (Jellybean). Neither of my new devices connect to this network. I have had the same problem in a local cafe.
I have researched this problem. It is not uncommon. It appears to be caused by an odd mix of hardware (router and wifi chipset) and software (later versions of Android). If you are unlucky (like me and some others) you will be unable to connect to some networks.
The solution is to use static IP addressing (since your device is unable to obtain a dynamic IP address). This will allow your device to connect to the network -- but you need to know the correct settings (for static IP addressing) before you can actually use the network.
This problem has been reported by many people. Does anyone know if there is a fix or a workaround?
The only one I can think of it to get hold of a device that does connect to this network and copy the (static IP) settings. But this would only solve it for one location meaning that I will run into it again the next time I try to connect to a network with old hardware.
Sometimes when I get that problem it's due to IP address conflicts on the Windows 7 computers.
I go to the computer and:
http://helpdeskgeek.com/networking/release-and-renew-an-ip-address/
Otherwise I just pull the router out and refresh it, should work for another few weeks or so.
Asovse1 said:
Sometimes when I get that problem it's due to IP address conflicts on the Windows 7 computers.
I go to the computer and:
http://helpdeskgeek.com/networking/release-and-renew-an-ip-address/
Otherwise I just pull the router out and refresh it, should work for another few weeks or so.
Click to expand...
Click to collapse
I don't have access to the PC. It is owned by the hotel. I need a solution that I can apply client (Nexus) side.
Solution
I found a solution. I asked the guy to reset the router and both my Nexus and S3 immediately connected. Someone advised me to do this. I have no idea why it worked. Not really a solution since i cant go round cafes asking people to reset their routers for me.
Is there a way to find out IP, DNS, gateway etc values on Nexus when they are dynamically assigned?
I sometimes have this Problem when starting my accesspoint after enabeling wifi on my N7.
I have to reboot my N7 in that case to get an IP.
Happened to me quite a few times when I went out with it to a restaurant or something. It just loops and loops.
My Nexus (and S3) now connect to the hotel network every time now. So it looks like you only need to ask the owned to reset his router once.
Embraced with this problem
bobbyelliott said:
My Nexus (and S3) now connect to the hotel network every time now. So it looks like you only need to ask the owned to reset his router once.
Click to expand...
Click to collapse
Resetting the modem solves the problem if you don't make any change to the router settings. I don't understand why the hell google is not solving the problem yet...
many users are found to face the same problem..
eve I can connect with my Nokia E72 but not with my N7...
I can get the IP from my cell phone. But come on, what's the point of doing so?? Are you gonna assign the IP for each and every WiFi you connect?? Or if the IP changes everyday??
Static ip won't help, yes you can connect to wifi, but cannot get connection to internet. This is a bug of android, and ITs in Princeton univ. had some investigation. 412 should have fixed it
Sent from my HTC Z710e using xda premium
gcd0318 said:
Static ip won't help, yes you can connect to wifi, but cannot get connection to internet. This is a bug of android, and ITs in Princeton univ. had some investigation. 412 should have fixed it
Sent from my HTC Z710e using xda premium
Click to expand...
Click to collapse
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
TheDarkDefender said:
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
Click to expand...
Click to collapse
What was the solution?
bobbyelliott said:
Is there a way to find out IP, DNS, gateway etc values on Nexus when they are dynamically assigned?
Click to expand...
Click to collapse
For a simple display of the values look at something like Network Signal Info of Wifi Analyser (both free)
jet1000 said:
What was the solution?
Click to expand...
Click to collapse
Use a static IP .
Sent from my Nexus 7 using xda app-developers app
You can only get internet access when you'll be using the correct IP, DNS etc. So try to find out what is the working IP setting...
Sent from my Nexus 7 using xda app-developers app
Deleted
I just started having a similar problem. I have a samsung galaxy tab with Sprint. I've had it for a year and this is the first time I've had this trouble.
The only difference is, I cannot connect to any wifi network at all. It keeps hanging on "obtaining IP address" and then disconnects. It doesn't matter if it's my home wifi or school or free wifi in a restaurant.
The only possible connection I can make is that I downloaded Lookout to check it out as a possible security app, I have since uninstalled it but that did not fix my problem.
Continuing to research this but any ideas on how to fix this would be fantastic.
I'm having this problem on my HTC One S. It happened yesterday without warning and it's really annoying. I went to a nearby cafe and the wifi worked perfectly, so it's something wrong here.
Static IP solution connects to me to the network but I can't actually use the internet, so I'm stumped.
i'm getting the same error with AOKP 4.2.2, and also know people with stock 4.2.2 with it.
the only way i found to fix it is to reboot the phone..... and wait for it to happen again and reboot it again
i cannot use static IP since in my university (and some other public places) it is not possible to connect it like that :S
TheDarkDefender said:
no. The same problem with 4.2.1 on my N7. God,this is really pissing me off !
EDIT: Finally found a solution . Thank god!!
Click to expand...
Click to collapse
How did you solve this? I Need help with my tf 300
bobbyelliott said:
There appears to be a problem with new versions of Android and old routers. Many people have reported the "obtaining IP address" loop problem.
Let me explain. I use the leisure facilities in a local hotel. It has a public (open) wifi network. I believe it uses an old router. My Galaxy S2 (Gingerbread) and AsusTransformer (ICS) both connected to this network without problems. I recently replaced the S2 with an S3 (ICS) and my Transformer with a Nexus 7 (Jellybean). Neither of my new devices connect to this network. I have had the same problem in a local cafe.
I have researched this problem. It is not uncommon. It appears to be caused by an odd mix of hardware (router and wifi chipset) and software (later versions of Android). If you are unlucky (like me and some others) you will be unable to connect to some networks.
The solution is to use static IP addressing (since your device is unable to obtain a dynamic IP address). This will allow your device to connect to the network -- but you need to know the correct settings (for static IP addressing) before you can actually use the network.
This problem has been reported by many people. Does anyone know if there is a fix or a workaround?
The only one I can think of it to get hold of a device that does connect to this network and copy the (static IP) settings. But this would only solve it for one location meaning that I will run into it again the next time I try to connect to a network with old hardware.
Click to expand...
Click to collapse
Note: You Must have root.
Go to
/data/misc/dhcp/
and delete all 3 / 4 files there.
And voila it should work.
Hi,
Just got a shiny new Galaxy Note 10.1 last weekend. Yesterday, after receiving my case and keyboard from Amazon, I brought it in to school to start taking advantage of the S-Pen for note taking in classes that keyboards don't quite cut it in. Unfortunately, it revived an issue that I had and ignored on my HTC Rezound from last year... an issue that a WiFi device can't ignore, and unfortunately my phone's battery is not up to using CM10's tether function all day (and it might start running down my monthly data being used 5 days a week, all day).
So, any ideas what might cause this issue? The school primarily has Macs, and my Windows 8 Laptop sometimes has issues, but at least half the time it works fine. It is just Android devices that will not work. They connect, and get great signal strength, but just won't get any actual data. To my knowledge, nobody has ever gotten an Android device to connect. My Rezound is running an unofficial CM10 (4.1 JB) version, and my Note is using whatever the newest official update is (4.1 as well, I believe. Non-rooted). I don't know a whole lot about this type of stuff, but I'm not afraid to tinker around to try and get it working. I've tried a few other suggestions from numerous Google searches, but to no avail so far. The network is unprotected, and run by the school's IT people, so needless to say I have no way to easily change settings for the campus' network. I'd prefer not root the Note just yet, but if I need to, so be it. Any ideas what this might be?
Thanks
Some more Info
Coffeeist said:
[Original Post]
Click to expand...
Click to collapse
Some more info:
I cannot ping the tablet from my laptop (I get no packet loss, but all return 'Destination Host Unreachable'.
Same result if I try pinging my laptop or the router from my tablet using Terminal Emulator.
Sometimes, if set to DHCP, the tablet will give an 'Authentication Error Occured' error (or similar, I don't recall the actual wording). Sometimes it indicates a connection, but just won't work. I've never had a problem connecting using the same info as my laptop (with the IP changed, of course), but again, no internet, no ping.
Thanks
May or may not be the problem, but from what I've noticed, school networks tend to have a lot of blocked ports. I know the main Google Sync Framework uses port 5228. Try shooting an email to a network admin in your school's IT dept, asking about that port or just in general if they're aware that Android devices are unable to connect on their network.
Coffeeist said:
Some more info:
I cannot ping the tablet from my laptop (I get no packet loss, but all return 'Destination Host Unreachable'.
Same result if I try pinging my laptop or the router from my tablet using Terminal Emulator.
Sometimes, if set to DHCP, the tablet will give an 'Authentication Error Occured' error (or similar, I don't recall the actual wording). Sometimes it indicates a connection, but just won't work. I've never had a problem connecting using the same info as my laptop (with the IP changed, of course), but again, no internet, no ping.
Thanks
Click to expand...
Click to collapse
What do you mean by "same info as my laptop" what types of credentials are you referring to? Something you have to change on the laptop in order to get in? The more information regarding this you can provide (safely, mind you, mask/alter any sensitive info), the better we can assist you. If you have to do something like set a VLAN, then you're never going to get an Android device to work as we do not have the capability to use VLAN'd wireless like most PCs and Macs can with the proper configuration changes. If there's some browser catch-all page, then that should work, but based on your statement "with the IP changed" leads me to believe that you're messing with the adapter settings directly. I would be especially keen to helping you with more detailed networking issues like this should you provide me with the information requested. I look forward to your reply. (Yes, I like technical challenges like this, it's why I work VoIP support.)
IP address or no IP address
Coffeeist said:
Some more info:
I cannot ping the tablet from my laptop (I get no packet loss, but all return 'Destination Host Unreachable'.
Same result if I try pinging my laptop or the router from my tablet using Terminal Emulator.
Sometimes, if set to DHCP, the tablet will give an 'Authentication Error Occured' error (or similar, I don't recall the actual wording). Sometimes it indicates a connection, but just won't work. I've never had a problem connecting using the same info as my laptop (with the IP changed, of course), but again, no internet, no ping.
Thanks
Click to expand...
Click to collapse
since you know ping, then did you check the IP address for each device?
Back to basic:
1: ping your device gateway IP
2) if ok, then ping ur device (tablet or laptop)
3) if ok then ping bbc.co.uk (this will check your dns), if failed ping your dns's IP address.
If no IP on android, then check if there is any protection on device. It sound like no IP been allocated for you.
Depends on how good a school's IT dept. I have not seen many school actually put filter to stop non-window device.
I am not sure it has anything to do with VLAN yet. As a simple logon, device does not care VLAN or no VLAN.
The basic for us is 1) get an IP on device. 2) know how to get out (gateway IP) 3) interrept hwere you go (DNS resolution) 4) know how to get to internet (internet router, internet firewall, internet boardband et...)
If you have authentication error, then it is sure you are not going to get an IP address. If this is WiFi then check on security (WEP, WAP...TKIP...)
tinbox134 said:
since you know ping, then did you check the IP address for each device?
Back to basic:
1: ping your device gateway IP
2) if ok, then ping ur device (tablet or laptop)
3) if ok then ping bbc.co.uk (this will check your dns), if failed ping your dns's IP address.
If no IP on android, then check if there is any protection on device. It sound like no IP been allocated for you.
Depends on how good a school's IT dept. I have not seen many school actually put filter to stop non-window device.
I am not sure it has anything to do with VLAN yet. As a simple logon, device does not care VLAN or no VLAN.
The basic for us is 1) get an IP on device. 2) know how to get out (gateway IP) 3) interrept hwere you go (DNS resolution) 4) know how to get to internet (internet router, internet firewall, internet boardband et...)
If you have authentication error, then it is sure you are not going to get an IP address. If this is WiFi then check on security (WEP, WAP...TKIP...)
Click to expand...
Click to collapse
Hello Coffeeist,
Please contact your schools IT department and find out what kind of encryption they use on their APs.
If they use TKIP, then that is whats causing the problem with android devices.
Once TKIP is disabled on the AP you are connecting to, you will be able to reach the internet.
I say this because I had the same problem in the past (setting up Cisco APs), and can confirm that this is the cause of the problem.
TKIP shouldn't be used anyway. They should be using AES. TKIP is too weak.
I guess that last part answered another question that you might of had. (Why TKIP doesn't work with Android?) Android=Secure TKIP=WEAK.... Unacceptable for Android
Also, you mention something about not being able to ping your tablet from your laptop. If I understand this correctly, you have both your laptop and tablet connected to the same AP and you are trying to ping between the two. This wont work in most cases. Reason: "Port-Protection", which if enabled doesn't allow clients on the AP to communicate with each other.
Regards,
Ed
Let us know how it goes.
nasvi said:
Hello Coffeeist,
Please contact your schools IT department and find out what kind of encryption they use on their APs.
If they use TKIP, then that is whats causing the problem with android devices.
Once TKIP is disabled on the AP you are connecting to, you will be able to reach the internet.
I say this because I had the same problem in the past (setting up Cisco APs), and can confirm that this is the cause of the problem.
TKIP shouldn't be used anyway. They should be using AES. TKIP is too weak.
I guess that last part answered another question that you might of had. (Why TKIP doesn't work with Android?) Android=Secure TKIP=WEAK.... Unacceptable for Android
Also, you mention something about not being able to ping your tablet from your laptop. If I understand this correctly, you have both your laptop and tablet connected to the same AP and you are trying to ping between the two. This wont work in most cases. Reason: "Port-Protection", which if enabled doesn't allow clients on the AP to communicate with each other.
Regards,
Ed
Let us know how it goes.
Click to expand...
Click to collapse
With useful posts above the rest is not much left for me to say but a simple advice
Make sure your friends aren't playing a prank on you coz I tend to do it I use arpspoof and aireplay-ng to cause such mayhem
Sent from my A116 using Tapatalk 2
Airplay and Arpspoof wouldn't be possible if MFP is enabled on the AP. Also the OP is stating that it is with all android devices and not 1.
Sent from my HTC One XL using xda app-developers app
responses
First off, thanks for all of the posts, and I apologize for taking so long to respond.
Also, I did check port 5228 with my laptop, and it seemed to indeed be closed. Haven't been able to contact IT yet, but I will need to soon to solve an issue with another, unrelated issue.
Cynagen said:
What do you mean by "same info as my laptop" what types of credentials are you referring to? Something you have to change on the laptop in order to get in? The more information regarding this you can provide (safely, mind you, mask/alter any sensitive info), the better we can assist you. If you have to do something like set a VLAN, then you're never going to get an Android device to work as we do not have the capability to use VLAN'd wireless like most PCs and Macs can with the proper configuration changes. If there's some browser catch-all page, then that should work, but based on your statement "with the IP changed" leads me to believe that you're messing with the adapter settings directly. I would be especially keen to helping you with more detailed networking issues like this should you provide me with the information requested. I look forward to your reply. (Yes, I like technical challenges like this, it's why I work VoIP support.)
Click to expand...
Click to collapse
Just IP/DHCP/DNS (and I've also tried public DNS such as Google). Nothing fancy set up on the laptop (everything should be on Windows default network settings, same with Android on both devices). There is also no catch-all page, assuming I'm interpreting that correctly (as a login page sort of thing, like I'd get at Starbucks or a Hotel).
Glad to provide the challenge... truth be told, underneath the annoyance of lacking connection, I love issues like this because of the fun tricks and such that solving them can teach.
tinbox134 said:
since you know ping, then did you check the IP address for each device?
Back to basic:
1: ping your device gateway IP
2) if ok, then ping ur device (tablet or laptop)
3) if ok then ping bbc.co.uk (this will check your dns), if failed ping your dns's IP address.
If no IP on android, then check if there is any protection on device. It sound like no IP been allocated for you.
Depends on how good a school's IT dept. I have not seen many school actually put filter to stop non-window device.
I am not sure it has anything to do with VLAN yet. As a simple logon, device does not care VLAN or no VLAN.
The basic for us is 1) get an IP on device. 2) know how to get out (gateway IP) 3) interrept hwere you go (DNS resolution) 4) know how to get to internet (internet router, internet firewall, internet boardband et...)
If you have authentication error, then it is sure you are not going to get an IP address. If this is WiFi then check on security (WEP, WAP...TKIP...)
Click to expand...
Click to collapse
1. If I recall, this either had full loss, or Destination Host Unreachable, when pinging the gateway IP from the tablet.
2. Have tried this nonetheless, and I think I made it through once or twice just after turning on the tablet, but after that would only get Dest. Host Unreachable.
3. Had tried with Google, fails across any DNS.
I seem to get an IP, although sometimes I get the authentication error in Android and it won't connect. Whenever I set a static IP, based off of my laptop's IP (not the same, of course), I get connected, just no internet.
nasvi said:
Hello Coffeeist,
Please contact your schools IT department and find out what kind of encryption they use on their APs.
If they use TKIP, then that is whats causing the problem with android devices.
Once TKIP is disabled on the AP you are connecting to, you will be able to reach the internet.
I say this because I had the same problem in the past (setting up Cisco APs), and can confirm that this is the cause of the problem.
TKIP shouldn't be used anyway. They should be using AES. TKIP is too weak.
I guess that last part answered another question that you might of had. (Why TKIP doesn't work with Android?) Android=Secure TKIP=WEAK.... Unacceptable for Android
Also, you mention something about not being able to ping your tablet from your laptop. If I understand this correctly, you have both your laptop and tablet connected to the same AP and you are trying to ping between the two. This wont work in most cases. Reason: "Port-Protection", which if enabled doesn't allow clients on the AP to communicate with each other.
Regards,
Ed
Let us know how it goes.
Click to expand...
Click to collapse
Unless I am totally clueless about this stuff (er, moreso than I though I already was), it uses neither TKIP or AES, being an open and unsecured network.
sak-venom1997 said:
With useful posts above the rest is not much left for me to say but a simple advice
Make sure your friends aren't playing a prank on you coz I tend to do it I use arpspoof and aireplay-ng to cause such mayhem
Sent from my A116 using Tapatalk 2
Click to expand...
Click to collapse
Haha, I doubt it. None of my friends, especially the ones who I think would even try and do something like this, are tech-savvy enough for me to have any suspicion of that. Thanks though
Another piece of info (a pretty weird seeming one at that): Sometimes, I'll turn on my tablet in the middle of the day, and out of the blue there is an email notification there, for recent emails. Of course, if I go into browser, I can't get any pages. Can't think of any other networks that the device could/would connect to on campus, either.
Thanks!
Coffeeist said:
First off, thanks for all of the posts, and I apologize for taking so long to respond.
Also, I did check port 5228 with my laptop, and it seemed to indeed be closed. Haven't been able to contact IT yet, but I will need to soon to solve an issue with another, unrelated issue.
Just IP/DHCP/DNS (and I've also tried public DNS such as Google). Nothing fancy set up on the laptop (everything should be on Windows default network settings, same with Android on both devices). There is also no catch-all page, assuming I'm interpreting that correctly (as a login page sort of thing, like I'd get at Starbucks or a Hotel).
Glad to provide the challenge... truth be told, underneath the annoyance of lacking connection, I love issues like this because of the fun tricks and such that solving them can teach.
1. If I recall, this either had full loss, or Destination Host Unreachable, when pinging the gateway IP from the tablet.
2. Have tried this nonetheless, and I think I made it through once or twice just after turning on the tablet, but after that would only get Dest. Host Unreachable.
3. Had tried with Google, fails across any DNS.
I seem to get an IP, although sometimes I get the authentication error in Android and it won't connect. Whenever I set a static IP, based off of my laptop's IP (not the same, of course), I get connected, just no internet.
Unless I am totally clueless about this stuff (er, moreso than I though I already was), it uses neither TKIP or AES, being an open and unsecured network.
Haha, I doubt it. None of my friends, especially the ones who I think would even try and do something like this, are tech-savvy enough for me to have any suspicion of that. Thanks though
Another piece of info (a pretty weird seeming one at that): Sometimes, I'll turn on my tablet in the middle of the day, and out of the blue there is an email notification there, for recent emails. Of course, if I go into browser, I can't get any pages. Can't think of any other networks that the device could/would connect to on campus, either.
Thanks!
Click to expand...
Click to collapse
Based on your responses, I have a follow up question and comment. The question is as follows: Did you have to register your computer with your IT when you started school in order to be permitted on the wireless network? If this was the case they're likely filtering based on MAC address (which you won't be able to spoof on your Android, but you may be able to spoof on your laptop), get them to re-register your laptop after you spoof the MAC address so you can get both devices on using the same MAC address (though not at the same time of course unless you're fine with stuff randomly not working). The comment is as follows: Yeah, finding the workarounds to get back limitations like this is definitely a fun challenge because when you win, you've definitely learned something new. Oh, and you were right about my question of the gateway authentication page like a hotel wifi login page.
MAC
Cynagen said:
Based on your responses, I have a follow up question and comment. The question is as follows: Did you have to register your computer with your IT when you started school in order to be permitted on the wireless network? If this was the case they're likely filtering based on MAC address (which you won't be able to spoof on your Android, but you may be able to spoof on your laptop), get them to re-register it after you spoof the MAC address so you can get both devices on using the same MAC address (though not at the same time of course). The comment is as follows: Yeah, finding the workarounds to get back limitations like this is definitely a fun challenge because when you win, you've definitely learned something new.
Click to expand...
Click to collapse
Nope, it was up and running just through connecting normally, and has been since (mostly) - no registration or anything like that. Now, the reason that I put 'mostly' in parentheses is that sometimes the computer will be connected, but also have no internet (I don't think this started until I, dare I admit, upgraded to Windows 8). However, this only happens sometimes, whereas the Android devices never get internet access.
However, on the topic of MAC addresses, one post (in fact, I think it was on XDA) I saw awhile back while Google searching this problem was that someone had a similar issue, found to be with their device's MAC address having the letters 'FA' instead of 'FB' or something like that. Being that my Note isn't rooted, I haven't tested it with that, but perhaps I should give that a try with my CM10 Rezound?
(This is the post: HERE)
Thanks!
Coffeeist said:
Nope, it was up and running just through connecting normally, and has been since (mostly) - no registration or anything like that. Now, the reason that I put 'mostly' in parentheses is that sometimes the computer will be connected, but also have no internet (I don't think this started until I, dare I admit, upgraded to Windows 8). However, this only happens sometimes, whereas the Android devices never get internet access.
However, on the topic of MAC addresses, one post (in fact, I think it was on XDA) I saw awhile back while Google searching this problem was that someone had a similar issue, found to be with their device's MAC address having the letters 'FA' instead of 'FB' or something like that. Being that my Note isn't rooted, I haven't tested it with that, but perhaps I should give that a try with my CM10 Rezound?
(This is the post: HERE)
Thanks!
Click to expand...
Click to collapse
That shouldn't be it unless they have corporate level routers that don't recognize the MAC address of any devices manufactured after 2009 (when most of these manufacturers got the MAC addresses assigned to them (this is VERY unlikely)). I would honestly work with IT on campus and advise that it appears not a single Android device is allowed on the network. If they're blocking Android for any reason, check the terms of service for using the WiFi and see if there's any provisions for banning an entire brand of device/OS for whatever reason. If there's only provisions for individual banning, then take it back to them and show them that your record has not been abusive in the least and go from there. Make a case, otherwise draw one up with legal council. *shrugs* I don't believe anyone should ever be punished for the type of device they chose to purchase, that's first amendment choice, but it really comes down to their terms of service which you agree to by using the wifi.
Cynagen said:
That shouldn't be it unless they have corporate level routers that don't recognize the MAC address of any devices manufactured after 2009 (when most of these manufacturers got the MAC addresses assigned to them (this is VERY unlikely)). I would honestly work with IT on campus and advise that it appears not a single Android device is allowed on the network. If they're blocking Android for any reason, check the terms of service for using the WiFi and see if there's any provisions for banning an entire brand of device/OS for whatever reason. If there's only provisions for individual banning, then take it back to them and show them that your record has not been abusive in the least and go from there. Make a case, otherwise draw one up with legal council. *shrugs* I don't believe anyone should ever be punished for the type of device they chose to purchase, that's first amendment choice, but it really comes down to their terms of service which you agree to by using the wifi.
Click to expand...
Click to collapse
I'll give it a shot, thanks.
Coffeeist said:
I'll give it a shot, thanks.
Click to expand...
Click to collapse
Sorry to bump the thread, but seeing as it's my own I figured it would be alright...
I got around to asking the the school IT about the issue, and they said that the deliberately block mobile traffic, which they went on to find out does include Android tablets (I understand phones, but I can't even begin to understand why they target Android tablets... unfortunately, that's not my call). I Google searched a bit, and found that networking devices from a company called Aruba can be set to block traffic from specific types of devices (supposedly Cisco and a few other companies can do similar things too), by checking something with the HTML version, or something like that (I'm by no means a networking expert hehe).
So, I guess I'll make my last effort with this thing, and ask if anyone knows of some legal, non-hacky way of getting by this?
I'm guessing not, but worth asking.
Thanks
Coffeeist said:
Sorry to bump the thread, but seeing as it's my own I figured it would be alright...
I got around to asking the the school IT about the issue, and they said that the deliberately block mobile traffic, which they went on to find out does include Android tablets (I understand phones, but I can't even begin to understand why they target Android tablets... unfortunately, that's not my call). I Google searched a bit, and found that networking devices from a company called Aruba can be set to block traffic from specific types of devices (supposedly Cisco and a few other companies can do similar things too), by checking something with the HTML version, or something like that (I'm by no means a networking expert hehe).
So, I guess I'll make my last effort with this thing, and ask if anyone knows of some legal, non-hacky way of getting by this?
I'm guessing not, but worth asking.
Thanks
Click to expand...
Click to collapse
Before discussing any workarounds, you may need to review the Terms of Service for your wifi on the school premises first, review the consequences for bypassing their security measures, and figure if it's worth the risk to you... At this time, it'll be kind of "hacky" to get around such a block. In order to provide you with a valid workaround though we'll need a little bit of information regarding what's going on when you connect.
First, when you connect to the WiFi with your Android device, do you even receive an IP address? If you don't then we'll stop here, the only way to get around the types of blocks they're employing at this level would require hardware hacking/firmware reprogramming to change the identity of the device itself, which is flat out illegal in just about anywhere I can think of. Here's your checklist, fill out where applicable: (Even if you set static information to accomplish this, that will be a valid Y.)
Get an IP? (If Y, proceed)
Is it a valid IP address on the same network as your PC? (Either way, don't care)
Can you ping the gateway you got from DHCP on Android? (If Y, proceed)
Can you ping the DNS server(s) you got from DHCP on Android? (If Y, proceed)
Can you ping an external server such as Google DNS (8.8.8.8) on Android? (If Y, then we're done here)
It's kind of a bit of a process unfortunately, however, if you pass every single one of these tests with the Android device, there's good news. They're only filtering traffic based on the User-Agent identification of all your applications (and based on the MAC address of your device, denying your DHCP requests), you should be able to bypass this with a VPN tunnel back to your home from your Android (after setting your static IP) in order to encrypt and keep this information from leaking to their systems. However, this will likely set off alarms if they monitor their network heavily. If the school IT asks, then you're "working on projects in-between classes on your computer at home and your family has a home office with VPN already, so you used that to connect back to the house". Either way, they can't say much about it besides cut you off... again. Anywhos, I wouldn't recommend trying to bypass without doing all this research first, and then also evaluating the possible consequences, however the rewards are within themselves. You'll be the only person at school with a working mobile device, (besides those iSuckers). Technically, encrypting your traffic is completely legal (and they can't say anything legally about it), however, setting a static IP address in the same range as your computer at school may be against their TOS which you abide by being on campus. Let us know how everything goes.
Cynagen said:
Get an IP? (If Y, proceed)
Is it a valid IP address on the same network as your PC? (Either way, don't care)
Can you ping the gateway you got from DHCP on Android? (If Y, proceed)
Can you ping the DNS server(s) you got from DHCP on Android? (If Y, proceed)
Can you ping an external server such as Google DNS (8.8.8.8) on Android? (If Y, then we're done here)
Click to expand...
Click to collapse
With Static I set an IP and all other info (Gateway, DNS, etc, except for Network Prefix Length... no clue what that is, left it at 24 default), and could not ping gateway
Dynamic/DHCP I will have to check tomorrow, after downloading stuff for the tablet to get that info (I think I need root to use IfConfig with Terminal Emulator, correct?).
Whatever they use to block me out, it seems to have a slight hole built in... every day, multiple times a day, I will look down at my tablet and see notifications (mainly email, occasionally Facebook, etc) that pushed through on the schools network (I know that for sure, being that often times the emails are messages received during the day, in a time period where the tablet has been nowhere near any other networks). Maybe this hole can be breached?
Thanks!
Coffeeist said:
With Static I set an IP and all other info (Gateway, DNS, etc, except for Network Prefix Length... no clue what that is, left it at 24 default), and could not ping gateway
Dynamic/DHCP I will have to check tomorrow, after downloading stuff for the tablet to get that info (I think I need root to use IfConfig with Terminal Emulator, correct?).
Whatever they use to block me out, it seems to have a slight hole built in... every day, multiple times a day, I will look down at my tablet and see notifications (mainly email, occasionally Facebook, etc) that pushed through on the schools network (I know that for sure, being that often times the emails are messages received during the day, in a time period where the tablet has been nowhere near any other networks). Maybe this hole can be breached?
Thanks!
Click to expand...
Click to collapse
It seems like small gaps where the system doesn't block you long enough to receive some traffic, but that is promising. BTW, you can get your "network prefix" (netmask as we call it) from your computer. If you go into the command prompt on windows and run "ipconfig /all" you'll get 4 useful bits of info we need, IP address (so you can mimic it), the gateway, the subnet mask (usually 255.255.something.something) and the DNS servers. The subnet mask determines what you use, and I HIGHLY doubt they use 24 (that's mainly for home networks, 24 = 254 devices permitted on the DHCP, 16 = 65534 devices (this is WAY more likely)).
Cynagen said:
It seems like small gaps where the system doesn't block you long enough to receive some traffic, but that is promising. BTW, you can get your "network prefix" (netmask as we call it) from your computer. If you go into the command prompt on windows and run "ipconfig /all" you'll get 4 useful bits of info we need, IP address (so you can mimic it), the gateway, the subnet mask (usually 255.255.something.something) and the DNS servers. The subnet mask determines what you use, and I HIGHLY doubt they use 24 (that's mainly for home networks, 24 = 254 devices permitted on the DHCP, 16 = 65534 devices (this is WAY more likely)).
Click to expand...
Click to collapse
Well, I just had a clean connection for about 5 minutes, and had a normal-looking IP based on my PC. Using Terminal Emulator I pinged the gateway after my connection failed, still with no response. I still appeared to have a proper IP on my tablet, but no actual internet connection.
So, perhaps these small windows are something to pursue? Or perhaps sticking with the VPN plan is best?
Thanks!
Coffeeist said:
Well, I just had a clean connection for about 5 minutes, and had a normal-looking IP based on my PC. Using Terminal Emulator I pinged the gateway after my connection failed, still with no response. I still appeared to have a proper IP on my tablet, but no actual internet connection.
So, perhaps these small windows are something to pursue? Or perhaps sticking with the VPN plan is best?
Thanks!
Click to expand...
Click to collapse
You need to make sure your networking information is entered correctly, you still haven't said anything about the netmask in this situation. However, if you're entering this information in correctly then you should have a solid connection until they realize you've forced a device into the network. The only thing you can do beyond that point is during that window, open a VPN connection without using a single browser request so they don't know what the device is unless they check the MAC address. Either way, this is a window that can be used, you just need to avoid identifying your device in any way prior to initiating the VPN connection. Turn off Sync when you connect.