Hi guys, I found a french thread talking about getting band 20 to work
https://www.dealabs.com/bons-plans/...dragon-820-ram-4-go-rom-64-go---gris--/333256
You need to enter this code *#*#9439#*#* , then check the check box, finally you need to reboot the phone.
Can someone confirm if this trick is working ??
Edit: sorry guys, this is to activate band 20 for 3g 800mhz
In my case when i enter *#*#9439#*#* it does absolutely nothing.
sepacek said:
In my case when i enter *#*#9439#*#* it does absolutely nothing.
Click to expand...
Click to collapse
You need to be on the stock ROM (5.8.016s)
It works via secret menu app from store but i found out it is for 3G band 20 so it is useless.
Just read this: https://forum.xda-developers.com/showthread.php?t=3439154
thetrukos said:
Just read this: https://forum.xda-developers.com/showthread.php?t=3439154
Click to expand...
Click to collapse
I read it, but if this works, it's much much simpler.
Does not work.
thetrukos said:
Does not work.
Click to expand...
Click to collapse
How do you know ?? for me it worked i think, how can we see te current LTE working band ??
You need to place your sim card in the slot 1
leptdre said:
How do you know ?? for me it worked i think, how can we see te current LTE working band ??
You need to place your sim card in the slot 1
Click to expand...
Click to collapse
It's for starting China Telecom's CDMA (that's what the Chinese says). So nothing to do with 4G LTE at all.
Related
I have 1 Tatoo ,but cant connect with 3G band,Pls help me how to recognise between Tatoo support 3G and not support.Somebody told me that there are 2 version.Support and not support,But whats different ??
It depends on where you bought it...do you live in India? there is no 3G support for example...
TheSSJ said:
It depends on where you bought it...do you live in India? there is no 3G support for example...
Click to expand...
Click to collapse
Thanks for response,but can let me know how to identified ?By serial no or IMEI ?????
I can tel u its not availble in india
Sent from my HTC Tattoo using Tapatalk
If someone with a phone bought in India would tell me his baseband version I could then tell you the difference...
Properties, scroll down until bottom and go to telephone info (or something like this, have it written in German ), scroll again down until u see baseband version entry...mine is:
13.29.55.13H_3.35.07.31
TheSSJ said:
If someone with a phone bought in India would tell me his baseband version I could then tell you the difference...
Properties, scroll down until bottom and go to telephone info (or something like this, have it written in German ), scroll again down until u see baseband version entry...mine is:
13.29.55.13H_3.35.07.31
Click to expand...
Click to collapse
Thanks for your information.will try
India base band version
fan2tech said:
Thanks for your information.will try
Click to expand...
Click to collapse
hi
im from india and my base band version is
13.29.55.13G_3.35.07.20 but to my knowledge india tattoo is not 3G
what say u
haree said:
hi
im from india and my base band version is
13.29.55.13G_3.35.07.20 but to my knowledge india tattoo is not 3G
what say u
Click to expand...
Click to collapse
omg, myn is same .20 at the end No wonder I dont get a FCKING 3G IN LATVIA!!!
P.S. Any way of getting a 3G ?
Either it is the .20 at the end or it is the Letter G/H telling the difference...
I misreaded, I got 13.29.55.13H_3.35.07.20
So its probably the "20" at end...
Stiflerlv said:
P.S. Any way of getting a 3G ?
Click to expand...
Click to collapse
You could try to install 3G radio.img to your Tattoo (somewhere in the forum posted by paul o'brien), but I also read somewhere that it bricked the tattoo of s.o. else, don't recall since much time has passed...
TheSSJ said:
You could try to install 3G radio.img to your Tattoo (somewhere in the forum posted by paul o'brien), but I also read somewhere that it bricked the tattoo of s.o. else, don't recall since much time has passed...
Click to expand...
Click to collapse
Oh,really can install 3G radio to use in version for India?Will try to search...
No warranty from my side!
Hi!
I'm writing this post to discuss about the no mobile data in the Ivan's CM10, please post here if your 3G works or not and which operator you use and from where you are. It's a common cyanogenmod bug, but someone fixed that (for other phones) so this post could be usefull for Ivan =)
MyNameIsKappa said:
Hi!
I'm writing this post to discuss about the no mobile data in the Ivan's CM10, please post here if your 3G works or not and which operator you use and from where you are. It's a common cyanogenmod bug, but someone fixed that (for other phones) so this post could be usefull for Ivan =)
Click to expand...
Click to collapse
Same bug for me installing FrozenPika10_v1, no sim detected (vodafone italy)
il_nonno said:
Same bug for me installing FrozenPika10_v1, no sim detected (vodafone italy)
Click to expand...
Click to collapse
No sim detected or you haven't 3g network??are you sure you are on ics??
pikachukaki said:
No sim detected or you haven't 3g network??are you sure you are on ics??
Click to expand...
Click to collapse
i was coming (and revert to) your frozenpikaB928V1.3...no 2g and 3g available, no pin request on boot
il_nonno said:
Same bug for me installing FrozenPika10_v1, no sim detected (vodafone italy)
Click to expand...
Click to collapse
I have Vodafone Italy too, and i had the same problem with an old cm7 from geno... I solved removing the SIM PIN, but even if i did that I wasn't able to connect to mobile data, but my SIM was detected, I've also read in internet and it is a common problem with cyanogenmod and Vodafone Italy (and some others carriers)
By the way, i also have Vodafone Italy and i don't have mobile data in cm10
MyNameIsKappa said:
I have Vodafone Italy too, and i had the same problem with an old cm7 from geno... I solved removing the SIM PIN, but even if i did that I wasn't able to connect to mobile data, but my SIM was detected, I've also read in internet and it is a common problem with cyanogenmod and Vodafone Italy (and some others carriers)
By the way, i also have Vodafone Italy and i don't have mobile data in cm10
Click to expand...
Click to collapse
Before upgrading to ics, i was running cm7 without any problem even with pin code enabled
il_nonno said:
Before upgrading to ics, i was running cm7 without any problem even with pin code enabled
Click to expand...
Click to collapse
But i had that problem only with one version of CM7, with others i had no problem...
I found that is something related with APNs, the sim isn't able to create them correctly or something like that
I asked to unlock the network with a pin!?
Using WIND Italy.
Moved To Q&A
No question threads in the dev section please.
Add Pro tag to the title.
Sent from my U8800
I can't get network select wcdma only, this only wants to work on the edge network and this is very slow data, I tried 3845#*800# and *#*#4636#*#* I can not find where to select wcdma only. With the ROM CM11 can select 3G only and works fine, but I dont like that rom due to not have IR,
Some advice? I really need help. thanks.
jonmorera said:
I can't get network select wcdma only, this only wants to work on the edge network and this is very slow data, I tried 3845#*800# and *#*#4636#*#* I can not find where to select wcdma only. With the ROM CM11 can select 3G only and works fine, but I dont like that rom due to not have IR,
Some advice? I really need help. thanks.
Click to expand...
Click to collapse
You can flash the IR app from this thread: http://forum.xda-developers.com/showthread.php?t=2596104
I use it and it works just fine! Aside from that, I don't have an answer for you.
ousoonerchase said:
You can flash the IR app from this thread: http://forum.xda-developers.com/showthread.php?t=2596104
I use it and it works just fine! Aside from that, I don't have an answer for you.
Click to expand...
Click to collapse
Thanks dude!!! you save me, all problems solved thanks very much!!! :good:
can someone explain what does it mean ?
does it mean i cant use the 2nd sim ?
thank you
noureddine86 said:
can someone explain what does it mean ?
does it mean i cant use the 2nd sim ?
thank you
Click to expand...
Click to collapse
No,, it means that 1st sim operates normal.... But voice on 2nd sim when set to 3g will not work
Config as below:
1st=3g/2g
2nd=2g only
Hey, guys I think I found the key to make ROM single Sim for our x727. The only thing that I need is the build.prop of the original ROM no modded please. (Btw grabs service real quick because only reads one Tray.)
If you dont believe, Im running version 5.9.20 and 1 sim card full bars.
Abdiel1224 said:
If you dont believe, Im running version 5.9.20 and 1 sim card full bars.
Click to expand...
Click to collapse
What's your point? I didn't get that?
Isn't it just adding ro.dual.sim.phone=false to the Build.Prop?
ceo.mtcl said:
What's your point? I didn't get that?
Click to expand...
Click to collapse
This is only for x727 users that have custom ROM. US version have only 1 sim tray so when you install the CN, CM version it takes long time to read the signal because is trying to read 2 sim card instead of 1.
Ascertion said:
Isn't it just adding ro.dual.sim.phone=false to the Build.Prop?
Click to expand...
Click to collapse
No, because I did that and the phone shows no sim card interested everytime.
Possibly this is my issue; ever since unlocking; twrp; rooting. My data seems very slow to lock onto a signal. I started a thread about this.
I'm on an x727 on att
I believe I went back to stock but the issue persists.
masterofstuff124 said:
Possibly this is my issue; ever since unlocking; twrp; rooting. My data seems very slow to lock onto a signal. I started a thread about this.
I'm on an x727 on att
I believe I went back to stock but the issue persists.
Click to expand...
Click to collapse
With only 1 sim card reading on the system the signal locks faster. Because it reads one.
Please share this method. I'm trying to get MIUI to work for x727 users but it can't grab the imei of the second sim slot. If it works we might be able to flash any MIUI ROM on our devices.
Ascertion said:
Please share this method. I'm trying to get MIUI to work for x727 users but it can't grab the imei of the second sim slot. If it works we might be able to flash any MIUI ROM on our devices.
Click to expand...
Click to collapse
Go to build.prop and change to this:
ro.product.model=LEX727
ro.product.locale=en-EN
persist.radio.multisim.config=NA
Reset and thats all you should have Miui Us version.
My current ROM has
Ro.product.locale=en-US
Not en-EN should I change it?
Abdiel1224 said:
Go to build.prop and change to this:
ro.product.model=LEX727
ro.product.locale=en-EN
persist.radio.multisim.config=NA
Reset and thats all you should have Miui Us version.
Click to expand...
Click to collapse
Thank you for that. I'll see if MIUI takes those changes without an issue. :good:
Ascertion said:
Thank you for that. I'll see if MIUI takes those changes without an issue. :good:
Click to expand...
Click to collapse
I wont give u any trouble. Thats what I did and im currently running MIUI
masterofstuff124 said:
My current ROM has
Ro.product.locale=en-US
Not en-EN should I change it?
Click to expand...
Click to collapse
Not really, bc thats for location and language. It dosen affect anything.
Ascertion said:
Thank you for that. I'll see if MIUI takes those changes without an issue. :good:
Click to expand...
Click to collapse
i have tried it and i can confirm that it worked well
Abdiel1224 said:
Go to build.prop and change to this:
ro.product.model=LEX727
ro.product.locale=en-EN
persist.radio.multisim.config=NA
Reset and thats all you should have Miui Us version.
Click to expand...
Click to collapse
Hmmm. no ro.product.model line for CM..... Should I switch ro.product.name=ZL1_CN to LEX727?
Edit: Led to bootloop and had to reflash... don't do this
zmanfarlee said:
Hmmm. no ro.product.model line for CM..... Should I switch ro.product.name=ZL1_CN to LEX727?
Edit: Led to bootloop and had to reflash... don't do this
Click to expand...
Click to collapse
These two are the important ones.
ro.product.locale=en-EN
persist.radio.multisim.config=NA
CM13 is already set to US so really only the multi sim change is needed on CM.
zmanfarlee said:
Hmmm. no ro.product.model line for CM..... Should I switch ro.product.name=ZL1_CN to LEX727?
Edit: Led to bootloop and had to reflash... don't do this
Click to expand...
Click to collapse
Just create a new line with that and that's all