Screen Mirror not working in TW 6.0.1 roms - Galaxy Note 3 Q&A, Help & Troubleshooting

In every TW 6.0.1 roms(Phronesis, AryaMod, Magma, Norma, etc), screen mirror works in the beginning but after some time it stops working and it never connects. I also tried adding wlan.wfd.hdcp=disable this line in Build.prop but still no use. Please help
Model - SM-N900W8

fad19 said:
In every TW 6.0.1 roms(Phronesis, AryaMod, Magma, Norma, etc), screen mirror works in the beginning but after some time it stops working and it never connects. I also tried adding wlan.wfd.hdcp=disable this line in Build.prop but still no use. Please help
Click to expand...
Click to collapse
Did you tried with DarkLord Kernel ?

zlazaar said:
Did you tried with DarkLord Kernel ?
Click to expand...
Click to collapse
Tried but no difference

Related

[Q] Galaxy Y ROM BOOTED SUCCESSFULLY ON Galaxy Y DUOS. NO FORCE CLOSE

Hello Respected Developers,
I am very flashaholic ex-user of Galaxy Y and currently using Y DUOS.
I was on stock kernel in YDUOS (stock_ddlg1_6102) and flashed 2 ROMs of galaxy y(not duos)
1)Evo x2.1(with Kernel REMOVED)
2)Evo x4(With no Kernel inside its zip as it is kernel free)
now both the times device succefully booted without giving any force closes.
only problems i found were
1)Baseband not found hence No Network
2)Could not change brightness.
3)Auto Rotation ON will make screen in landscape mode in any physical orientation(But can be managed by turning it OFF)
Woking:
OTHER things I guess were Working.
Music player Working Perfeclty.
Wifi showed me nearby connections.
bluetooth got turned on but not checked.
and so on..
what i am thinking is that only now we need to replace the drivers part of the OS with that of YDUOS..
I dont know these stuff but hoping someone can do it.
I really want to use those amazing roms of galaxy y...
I am a single sim user so i would not even need any dual sim features like sim management.
PLEASE YDUOS developers try to work out this problem PLEASE and POST HOW TO MAKE THEM WORK IN OUR Y DUOS and i would even appreciate if some of you point me what to replace and from where.
I think we can use all roms of Galaxy Y on YDUOS(but i am not a developer so need help.)
please bring joy to our boring YDUOS life.
what really lead me to flashing these roms in YDUOS is because once by mistake i flashed yduos stock rom in y.and i realised this when i saw the yduos samsung logo.but nothing happened to my device i removed the battery while it was booting and then flashed actual rom.so i was thinking that may be these devices are so much similar that they can work on each others roms with just minor replacement of files..
Eagerly waiting for someone to answer.
you just need to simply port the rom
I dont have a duos so I cant test but just copy the framework folder over to a stock rom base of duos and the app folder too although you will have to mod the systemui as duos has different usb smali so just copy the usb smali from a duos systemui into the port ui
have a look at
http://forum.xda-developers.com/showthread.php?t=1941239
marcussmith2626 said:
you just need to simply port the rom
I dont have a duos so I cant test but just copy the framework folder over to a stock rom base of duos and the app folder too although you will have to mod the systemui as duos has different usb smali so just copy the usb smali from a duos systemui into the port ui
have a look at
http://forum.xda-developers.com/showthread.php?t=1941239
Click to expand...
Click to collapse
I tried porting but rom did not boot,just stuck on samsung logo.
Also i did not get why we are replacing system apps in port rom with that of stock rom? because i want the ui of port rom and not from stock rom.
jaykasundra said:
I tried porting but rom did not boot,just stuck on samsung logo.
Also i did not get why we are replacing system apps in port rom with that of stock rom? because i want the ui of port rom and not from stock rom.
Click to expand...
Click to collapse
I didn't say use system apps of duos base rom
I said you may have to use the USB smali files from the duos systemui & copy to port systemui
Follow the instructions on the link I gave & it will boot if done right
See
I would say....Download different country firmware and flash the stock on Y duos...
Some of them might give u reception
Sent from my XT1032 using xda app-developers app
---------- Post added at 03:22 PM ---------- Previous post was at 03:22 PM ----------
jamstar.5 said:
See
I would say....Download different country firmware and flash the stock on Y duos...
Some of them might give u reception
If they do....I can make a cm for u
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
Sent from my XT1032 using xda app-developers app
I also flashed Y's Custom Rom...HYperion GM 8 and EvoX 4 They look awesome so i flashed i also got same problems as urs like brightnesz,autorotation etc etc
Use Hyperion GM Ported For Y Duos tht wil giv u some pleasance ..
marcussmith2626 said:
I didn't say use system apps of duos base rom
I said you may have to use the USB smali files from the duos systemui & copy to port systemui
Follow the instructions on the link I gave & it will boot if done right
Click to expand...
Click to collapse
Sir I already tried 4-5 times But will give few more tries.
Isnt there any gb rom porter???
jaykasundra said:
Sir I already tried 4-5 times But will give few more tries.
Isnt there any gb rom porter???
Click to expand...
Click to collapse
theres loads
google is your friend
marcussmith2626 said:
theres loads
google is your friend
Click to expand...
Click to collapse
still not booting.
I think i am not able to properly do build prop editing.
can you help me i have uploaded both build props.
jaykasundra said:
still not booting.
I think i am not able to properly do build prop editing.
can you help me i have uploaded both build props.
Click to expand...
Click to collapse
just use duos one but I presume you would change the 1 to 0 in network type to disable 2nd sim
#For Dual-Sim BPM default setting, [0:disable] [1:enable]
persist.sys.bpmsetting.enable=0
#For Dual-Sim default sim2 network type setting
persist.radio.networktype_1=1
and replace everything below
# ADDITIONAL_BUILD_PROPERTIES
with the one from evo
like I said I dont have a duos so I cant play with it - you will have to work out how to port things yourself - theres loads of guides
have a look at a duos rom that has already been ported from 5360 to see what the build.prop is like

Multi user and soft key navigation bar on note 5100 4.4.2 kitkat official poland

I GOT SUCCESS IN ENABLING MULTIUSER AND SOFT NAVIGATION KEY ON THE OFFICIAL KITKAT 4.4.2 POLAND
I have been using the civiz 3.6.2 mainly for two three reasons
1.MULTI USER
2.NAVIGATION BAR
3.SMOOTH
Yesterday i flashed the 4.4.2 poland version its very smooth but was missing the beauty of civiz version . I couldnt resist myself in trying root and installing the custom recovery,i gave it the try and succeeded.
Anyways i wanted it for the xposed framework on kk. But it was looking incomplete and not usable(daily Driver) , i tried to enable the navigation bar frm wannam and xblast tools in xposed, but it was fail.
Then i installed Gravity Box for kk and it worked flawlessely enabeling many features such as navigation bar,It even makes possible to change the size and dimensions and remaping the soft keys in real time.
MULTI USER
I still was missing the multiuser capability on this kk version.But unfortunately i dont know programming at all ,i remembered the multiuser module for AOSP Phone rom,i tried it on the mega 6.3 recurssion 4.4.2 rom , it helped me to enable multiuser.BUt on the stock 4.2 of mega 6.3 it was not enabeling the multiuser functionality.
Though i decided to give try to the multiuser module for AOSP phone rom on my NOTE 8 5100......................................................................View attachment 2743204
HURRAY I GOT IT:cyclops:
ATTACHING THE SCREENSHOTS BELOW.Im not sure if you guys have tried it before.
I WONDER IF THE NOTE 8 5100 KITKAT POLAND OFFICIAL ROM IS AOSP ROM !!!
[/ATTACH][/ATTACH]
http://www.xda-developers.com/android/add-multiple-user-profile-support-on-your-phone/
you forgot to post the link !
:highfive:
moezaka said:
http://www.xda-developers.com/android/add-multiple-user-profile-support-on-your-phone/
you forgot to post the link !
Click to expand...
Click to collapse
nah... the multi user was already there... it just need to be activate... since samsung hide it in all of it stock firmware...
anyway... did it save the 2nd user after reboot... i think i read it somewhere last time...
edan1979 said:
nah... The multi user was already there... It just need to be activate... Since samsung hide it in all of it stock firmware...
Click to expand...
Click to collapse
how do i enable it?
cant help you there... i never fond of multi user... but have test it last time... there's a link somewhere...
edan1979 said:
cant help you there... i never fond of multi user... but have test it last time... there's a link somewhere...
Click to expand...
Click to collapse
kool i will find it
vimi93 said:
kool i will find it
Click to expand...
Click to collapse
try attached 4_2_multiple_user_enabler_root_1.2.apk, I know it is for 4.2, but should work for 4.4.2. You have to have root.
I can't able try because my Note 8 is 5110, and no 4.4.2 yet, so can't tell for sure if this works, but I know that there are some success in Galaxy Tab 3 threads..
EDIT: this may not work guys, so please use your own risk.
permanent resolution of enabling multiuser on 4.4.2 is modifying framework-res.apk and enabling there, that requires to decompiling framework-res.apk and updating bunch of xml files and recomling, signing..etc..
jazzespresso said:
try attached 4_2_multiple_user_enabler_root_1.2.apk, I know it is for 4.2, but should work for 4.4.2. You have to have root.
I can't able try because my Note 8 is 5110, and no 4.4.2 yet, so can't tell for sure if this works, but I know that there are some success in Galaxy Tab 3 threads..
EDIT: this may not work guys, so please use your own risk.
permanent resolution of enabling multiuser on 4.4.2 is modifying framework-res.apk and enabling there, that requires to decompiling framework-res.apk and updating bunch of xml files and recomling, signing..etc..
Click to expand...
Click to collapse
Hey buddy it worked as well !!!:good:
vimi93 said:
Hey buddy it worked as well !!!:good:
Click to expand...
Click to collapse
did you reboot your tablet couple times, and still working? if yes, this is indeed good news!
jazzespresso said:
did you reboot your tablet couple times, and still working? if yes, this is indeed good news!
Click to expand...
Click to collapse
yup it does !!!
:good:
vimi93 said:
how do i enable it?
Click to expand...
Click to collapse
It is enabled in framework There you can set how many users allowed. You need to deodex and rebuild the framwork app. Or use the module.
civato said:
It is enabled in framework There you can set how many users allowed. You need to deodex and rebuild the framwork app. Or use the module.
Click to expand...
Click to collapse
that's the best solution

Screen mirrroing

is it there a rom based on aosp for i9500 where i can do screen mirroing by using chromecast's app?
I can screen mirroing on aosp roms but the mirror screen is with negative/inverse colors on TV.
This problem (negative/inverse colors) doesnt happen on other tvs using the same chromecast dongle or using another cellphone (lg g2 stock and note 2 stock) and tablet (tab pro 8.4 5.1.1 aosp).
Also it doesnt happen if i use a stock rom based on 5.0.1 touchwiz.
PD: I have tried 2 different gapps and 3 different aosp rom based on 5.1.1. and all of them screen mirror with negative/inverse colors.
No it's a aosp/cm bug.
Lennyz1988 said:
No it's a aosp/cm bug.
Click to expand...
Click to collapse
Thanks for the reply . It should be a bug on aosp on i9500 because im using a galaxy tab pro using resurrection remix with aosp 5.1.1 and screen mirroing doesnt give negative / inverse colors .
Bruno_Tec said:
Thanks for the reply . It should be a bug on aosp on i9500 because im using a galaxy tab pro using resurrection remix with aosp 5.1.1 and screen mirroing doesnt give negative / inverse colors .
Click to expand...
Click to collapse
That is correct. Different device > Different drivers.
Hi,
I used Chromecast screen mirroring fine with PhoenixROM, but it's Touchwiz based. I don't know about Lollipop AOSP/CM based ROMs as I don't own a Chromecast yet.
~Lord
Lennyz1988 said:
That is correct. Different device > Different drivers.
Click to expand...
Click to collapse
Thanks for your answer.
do you know if there is a way to enable selinux in a cm based rom ?
i read in another forum that the problem with screen mirroing is because there is no selinux in cm for i9500.
i havent found a kernel with permissive selinux or a way to enable selinux on cm12.
do you know a way get selinux enabled? thanks.
Bruno_Tec said:
Thanks for your answer.
do you know if there is a way to enable selinux in a cm based rom ?
i read in another forum that the problem with screen mirroing is because there is no selinux in cm for i9500.
i havent found a kernel with permissive selinux or a way to enable selinux on cm12.
do you know a way get selinux enabled? thanks.
Click to expand...
Click to collapse
Hi,
You can't get "SELinux enabled". You can however change it from Enforced to Permissive. To do that try this app out.
All the best,
~Lord
XxLordxX said:
Hi,
You can't get "SELinux enabled". You can however change it from Enforced to Permissive. To do that try this app out.
All the best,
~Lord
Click to expand...
Click to collapse
Thanks for answering . I know that app . My problem is that on a s4 running aosp when i use apps like selinux changer the app says that there is no selinux to change .
Bruno_Tec said:
Thanks for answering . I know that app . My problem is that on a s4 running aosp when i use apps like selinux changer the app says that there is no selinux to change .
Click to expand...
Click to collapse
I have used this on many ROMs whos screen mirroring doesn't seem to work properly, It always seems to ... Well just WORK ! lol - Give this a shot and see if its helps any
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193

Samsung On7 Hybrid 5.1.1

Samsung On7 Hybrid​
Features
¤ Deodexed.
¤ Zipaligned (better ram)
¤ Dolby atmos added.
¤ Download Booster.
¤ Explosion Kernel added.
Download Link
Remember, I'm not responsible for what you flash.
Latest link[G530F/H/M]: [url]https://drive.google.com/file/d/0B2fbJbmCWnIKR1ZWXzNKbEhkcmc/view?usp=sharing[/URL]
Camera Fix (Thanks to @KoSett): Coming soon.
ROM Installation process
1) Go to TWRP based recovery.
2) FULL WIPE is highly recommended!
3) Install the zip file from SDcard.
4) Swipe to Install.
5) Wait!
6) Reboot.
7) Hurry to Camera Settings and set from 9.6MP to 8.0MP
8) Flash the updated Camfix.zip (Thanks to @KoSett)
9) Thats it! Enjoy!!
Credits
Learnt a lot about porting roms from @KoSett
Explosion kernel Thanks @CarlosArriaga
XDA DevDB Information
Samsung On7 Hybrid , ROM for the Samsung Galaxy Grand Prime
Contributors
Eden532
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Galaxy Grand Prime
_____________________________________________
Version Information
Status: Stable
_____________________________________________
Created 2017-03-21
Last Updated 2017-04-20
_____________________________________________
Screenshots
This rom works with G530FZ?
HugoDEV said:
This rom works with G530FZ?
Click to expand...
Click to collapse
I have g530f, (sim doesnt work) If you can test it would be great? (But i build it for g530f) If it doesnt work, ill try to port it for g530fz, but right now i have my exams going on..
Can someone test for G530H too? (After i upload the rom)
@KoSett ,Please I need your help on fixing sim and Camera, Check the updated link- https://mega.nz/#!GUcVTJ7J!5UsCaxf4qqnPifv3ice_N4V30bgtlv9v6q4HCQsOirI , In This one i removed setup wizard and added su.d ..
OMG,,,, Young bro ....You are so good. keep it up your job.
I will help you ...I will check later.don't worry for that.
Tell me first ,You completely used my guide?
Thanks @KoSett
I installed Unbuntu, used kitchen and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..
Eden532 said:
Thanks @KoSett
I installed Unbuntu, used kitchen and then, the guide for porting by you and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..
Click to expand...
Click to collapse
zip archive not workk !!!!!!!!!!!!!
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Is it working on 530H ?
Sent from my SM-G530H using XDA Labs
Sahin551 said:
Is it working on 530H ?
Sent from my SM-G530H using XDA Labs
Click to expand...
Click to collapse
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Sorry I can't...
i don't have data pack too. I have wifi at home but
i'm not at home right now
I will test it just 5 days later
Sent from my SM-G530H using XDA Labs
abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Ok so i downloaded the rom but sadly the zip is corrupt or has some error please fix this!?
asarre said:
zip archive not workk !!!!!!!!!!!!!
Click to expand...
Click to collapse
G530H? Was it corrupt or Status 7 error?
KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
And internet works fine for me.
This is 5.1.1 itself..
The zip works right?
Build.prop tweaks from here
https://forum.xda-developers.com/grand-prime/general/lollipop-build-prop-tweaks-t3188026
Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon
Eden532 said:
Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon
Click to expand...
Click to collapse
It downloads fine but when i try to extract it , shows corrupt zip or file error and also in twrp it shows corrupt zip and im SM-G530H XXU
Ok ill fix it soon, im sorry guys!
Ill port the files from Nameless J5 for G530H, Sure guys! But cant figure out Sim fix ..
My net moves around 75kbps so, it may take time
Can someone upload G530H boot.img? Net too slow to download entire J5.. Please?
KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
mmcameraqdaemon replaced cam still not working, now shows "Camera failed" and not "Mediaserver failed"
About SIM error..
It shows no service but the sim is detected i can see my sim's Carrier in the sim toolkit, And when i go to settings > mobile networks the "com.android.phone has stopped" message pops up force closing the settings app.

[TW][ROM] Galaxy Tab 2 7.0 Touchwiz rom

Hi all,this rom is made and tested for Tab 2 7.0 P3110 (it should work for P3113). This rom is NOT TOUCHWIZ BASED that means you cannot download any Touchwiz app and it would work in this rom. It have some ported TW apps and they work. Rom is builded with Nightly CM11 and it work really fast. I would try to update it and port more TW apps on it. If someone know how to port old TW apps please reply.
How to install:
1.Install TWRP or CWM recovery
2. Always made backup
3.Wipe data,system,davlik and cache
4. Flash zip file
5.reboot to rom
Important:
1.In themes Select S5 TW theme (for now need that way but i would edit apps to look like TW wthoud theme)
2.This rome have sound booster
3. This rom doesent have GAPPS, i would provide a link to download them, but for Kitkat it just slow device​4. This rom uses a CM11 stock kernel moded to run TW frameworks.
Rom: https://drive.google.com/file/d/1W-U8SlKBSF9rlQXDxt5UV0erU0Q4LtnO/view?usp=sharing
Gapps: https://androidfilehost.com/?fid=1395089523397890528
Kernel source: https://github.com/An2rejKK/Tab-2-7.0-4.4-TW-rom-Kernel-source
screenshots? also you should post this in the development forum
It works i guess. Dpi is way too big and some apps crash. Why need samsung apps and chat on tho.
zer0_Clover said:
screenshots? also you should post this in the development forum
Click to expand...
Click to collapse
I posted it but Admin removed it... DPI is bc i cannot port any other TW Home app for this only this one, and only thing that crash is Clock and Task Menager... Is there a way to change DPI to one app but doesent efect others?
An2rejKK said:
I posted it but Admin removed it... DPI is bc i cannot port any other TW Home app for this only this one, and only thing that crash is Clock and Task Menager... Is there a way to change DPI to one app but doesent efect others?
Click to expand...
Click to collapse
closest i know to that is paranoid preferences on jellybean. but this is kitkat. walkman and sys ui crashed for me
zer0_Clover said:
closest i know to that is paranoid preferences on jellybean. but this is kitkat. walkman and sys ui crashed for me
Click to expand...
Click to collapse
hmm they work for me, Are you using Tab 2 7.0 P3110 or P3113?
An2rejKK said:
hmm they work for me, Are you using Tab 2 7.0 P3110 or P3113?
Click to expand...
Click to collapse
P3110. Sys ui keeps crashing and stuck on lockscreen
zer0_Clover said:
P3110. Sys ui keeps crashing and stuck on lockscreen
Click to expand...
Click to collapse
Sorry for late reaply, for me all works, did you do all correct while flashing? I maybe know where is the error, i had 2 kernels one from Samsung but sys ui and framework res crash, on other one i have half samsung half CM and it worked
i did all the wipes then flashed the rom. also what kernel do you use? cm11 is pretty laggy for me
zer0_Clover said:
i did all the wipes then flashed the rom. also what kernel do you use? cm11 is pretty laggy for me
Click to expand...
Click to collapse
Hi, i fixed the issuse, i use SecMediaProvider and it wasnt installed, now i added CM11 stock one and roms works fine and there is error on CM keyguard and i put Samsung lockscreen instead, sorry for my mistake and thanks for help. I use stock CM11 kernel with TW framework Addon, i put that in thread
An2rejKK

Categories

Resources