Ive been trying to root my phone using cf root but when i put my phone into download mode and connect it to the pc odin doesnt recognise it. However, when i reboot my galaxy s one of the bars at the top of odin turns yellow and in the message box it says "Added!!". Ive tried this on 2 different pc's and its still not working.
When i first connected the usb cable to the pc, a message came up saying if i wanted to install the software from a cd, but i dont have one so i couldnt. Then it said that the software couldnt be installed properly. How do i install it properly?
seeraj15 said:
Ive been trying to root my phone using cf root but when i put my phone into download mode and connect it to the pc odin doesnt recognise it. However, when i reboot my galaxy s one of the bars at the top of odin turns yellow and in the message box it says "Added!!". Ive tried this on 2 different pc's and its still not working.
When i first connected the usb cable to the pc, a message came up saying if i wanted to install the software from a cd, but i dont have one so i couldnt. Then it said that the software couldnt be installed properly. How do i install it properly?
Click to expand...
Click to collapse
Download the drivers from my signature & install them, make sure you haven't connected the phone while doing so. Restart windows, connect the phone. Windows will install the required drivers, & you are ready to go.
Do i install from setup.exe. Its asking for a password.
Ive extracted it all but i cannot set up.
My windows is 32bit. Can someone please tell me where i can the samsung usb 32 bit drivers please?
Ive managed to get the 32 bit drivers and it says that samsung usb modem and the samsung usb android composite device are ready to use. However, it says that no driver was found for the ethernet controller.
So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me
While flashing the phone through odin the phone failed on the system image. The firmware file is valid as it has been flashed previously with success. when the phone was rebooted again in download mode the PC will chime as if it can detect the phone at the warning screen although it isnt seen in device manager. as soon as I press Vol+ to continue the computer will say that the phone is an unknown device. No phone is present in device manager still and no error code returned to see what may be causing the connection issue. Along with that the smart switch screen appears rather then showing the usual screen that says Downloading.
No access to recovery or anything else as the phone immetiatly shows the smartswitch screen. When booted normaly the smartswitch screen is also accompanied by no response via usb to show connection not even the previously mentioned Unknown device error to indicate that the computer is even noticing a usb connection at all. All drivers are current.
Hello,
I have a galaxy note 4 that was working fine. First the phone couldn't be recognized by any laptop as it showed USB DEVICE NOT RECOGNiZED.
When this happened, i tried flashing CWM using my phone only because it didn't show on ODIN, using FLASHIFY. i downloded a CWM.img file and flashed it i clicked continue, the app asked me if i wanted to reboot the phone, i said yes, then this happened. My phone now is showing me the samsung logo when turned on with RECOVERY IS NOT SEANDROID ENFORCING in red on the top corner. i tried factory reseting the phone, but it wont boot into recovery mode to factory reset it, it only shows the logo and (RECOVERY IS NOT SEANDROID ENFORCING). when pushing POWER button + HOME+ volume down to go into downloading mode, the phone does so, but when connected is showing me again USB DEVICE NOT RECOGNIZED, it's is not recognized by ODIN, every other phone that i tried this on is recognized by odin and by the PC . i have tried reinstalling the samsung drivers several times, unistalling USB BUS, changing cables and using original ones, changing laptops and PC, kies, heimdall gremlin remover and nothing, the phone is not recognized by the PC as it shows in device manager as (unknown usb device (device descriptor request failed)). so anything that can be done using connection to PC is out of question because IT IS NOT RECOGNIZED BY ANY PROGRAM.
At first, i thought it was the micro USB adapter not working correctly or maybe having bent pins as it was charging but not transfering DATA, so i took it to a repair shop and changed the port completly, but NOOO THIS WAS NOT THE PROBLEME, the phonse still could not be recognized...
I have already succeded in rooting the phone several weeks ago without having any problems.
My probleme is that my phone is not recognized by odin heimdall or PC, it can't boot into recovery mode to do a factory reset, and is stuck on (RECOVERY IS NOT SEANDROID ENFORCING.)
Please help, i have TRIED EVERY THING !!!!! :crying::crying::crying::crying::crying::crying:
bro, you need to change the connecting cable, got myself at same situation & same error. I changed my usb cable, put note 4 in download mode, reinstall samsung usb drivers and odin detects it, installed stock rom & its working again. i wanted to root my galaxy note 4 sm-910f, i tried several times with different odin versions, used CF-Auto Root but it got stuck at bootloop every time i do with same Seandroid enforcing message.
nop, didn't work..
So I'm trying to flash a Samsung SM-7387V Galaxy Tab A with new firmware as it currently has Knox / Mobicontrol
So it is locked down and you can't do a factory reset. I'm using Odin 3.13.1 and have the firmware which has the 4 files needed. I was able to initially get it to show up on Com6 is Odin but after a few min it complained it couldn't connect to the com port. After that any time I'm in Download mode windows complains it doesn't recognize the device. No amount of uninstalling / re-installing the Samsung USB Drivers, changing USB ports, windows reboots has fixed anything.
The only time I can get Winblows to detect the USB device properly is when booting it up normally.
So any suggestions on what gives? Also suggestions on if I'm on the right path to restore the device to remove Mobicontrol.
rickblues said:
So I'm trying to flash a Samsung SM-7387V Galaxy Tab A with new firmware as it currently has Knox / Mobicontrol
So it is locked down and you can't do a factory reset. I'm using Odin 3.13.1 and have the firmware which has the 4 files needed. I was able to initially get it to show up on Com6 is Odin but after a few min it complained it couldn't connect to the com port. After that any time I'm in Download mode windows complains it doesn't recognize the device. No amount of uninstalling / re-installing the Samsung USB Drivers, changing USB ports, windows reboots has fixed anything.
The only time I can get Winblows to detect the USB device properly is when booting it up normally.
So any suggestions on what gives? Also suggestions on if I'm on the right path to restore the device to remove Mobicontrol.
Click to expand...
Click to collapse
Additional notes: I've tried on a second PC with a different USB cable, same results as soon as you connect it in the boot loader mode. Both systems complain it can't recognize the device. Windows 10 systems.
I was going to include some photos of the boot screen / windows error, but it seems you can't attach photos or new members can't?
New here so this was my first post, do first posts show up automatically as it seems to be a ghost town? Not sure if this topic is viewable? Thanks!