I bought a WD 4TB Portable HDD and formatted it as internal storage but it started crashing and saying in the storage section, "safe to remove device", then I bought a Desktop HDD, formatted it as internal storage and now that is doing the same thing. I unplug it then plug it back in but nothing happens. The Shield wont bring recognize it. It isnt showing up in ES Flie Explorer. I have to reformat it to work but I will lose all my data again but I obviously dont want to keep happening. Any help or suggestions please.
Related
Does Elocity A7 support NTFS file system? I have problems accessing my USB stick which is formatted in NTFS...or something else may be an issue !?!. In any event it can not read it...any suggestion?
Regards
Upgraded firmware and now when USB memory stick is plugged in I am getting a message the it is being checked for errors....but data on it so far cannot be accessed...Anybody else has issues with reading memory stick thru USB port?...SD card works like charm...
Regards
When I first got mine I was using my key which is fat32 and ran into the same problem. I had to reset the device before I could use my usb stick again. Haven't tried an NTFS usb device but either way it's not on the a7 to support NTFS, it is Android's task.
It would be interesting to know if other people had problems of accessing USB memory stick...for me memory stick would be much easier mean of exchange software/data between PC and Elocity than microSD.
Regards
I found out that if memory stick is formated as FAT32 then Elocity has no problem reading it...
USB memory stick
I have no problem accessing my USB stick, my problem is transfering the data like music or movies into folders which Elocity a7 doesn't allow me to do.
I have tried coping and or moving files i.e., songs, movies, am I doing something wrong or is there a right way to do it?
You can copy files from USB to SD card...only file by file not directories
The other way is to pull out your SD card and copy files on it using adapter on your PC
The third way is to use application which lets you access your Elocity using your browser on your network which will then allow you to copy files to/from device
Regards
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
ellwilson said:
My a7 originally could mount and read the sd card and the usb drive. Then one day it suddenly would not mount the sd card and it always said it was checking for errors. I tried a wipe and restore, formatting the card, and a different card. None of it worked. Finally I loaded Dexter's 1.41 mod. The mod worked great but the sd card still couldn't be mounted. And then the usb drive gave me errors and one time would work and another time it says preparing storage checking for errors. Right now neither the sd card or the usb are being mounted. After 4 emails to elocity support I am pretty frustrated with this unit and thinking of just ordering an ipad.
Click to expand...
Click to collapse
Do you apply the vold patch with 1.41? Also you have to have a folder/directory sdcard/sdcard-disk (sdcard-disk) is the one needed. This still won't allow card to be read from boot other then applying zips with sysrecovery. It has been mentioned before in another thread if your not running elocitys FW you can't really complain about it to them.
If that folder/directory isn't created it won't read with the patch. USB also has something about it. Read up on this thread.
http://forum.xda-developers.com/showthread.php?t=890042
Hello, I'm new here and I did experience some sort of USB or MicroSD issue where the eLocity unit did read the USB at first and then the next time I put the USB flash drive it cannot read it, no matter what I do. Then I hit the reboot key at the back using a pin or something sharp and I tested both drives and it did read them.
I learn that before removing the USB FD you need to dismount by tapping the connection icon to safely remove the USB. You will then receive a message to confirm the removal of USB drive.
I hope this help.
Peace....
I just unlocked my bootloader and now I cant access my internal phone storage.
Its says: Internal phone storage is in USB mass storage mode. Please exit this mode to access internal phone storage.
Any advice? Its not plugged into the usb. I have restarted the phone. I pulled the battery and everything. When I go to file and click on internal phone storage I get the message above. I can access my sd card.
Have you tried plugging it in to your computer via USB and changing the USB connection on the phone to 'None'? That's probably what I would do. Worth a shot.
Yeah I did and no luck. I'm think of just sbf 1.8.3 and see what happens
Yeah I'm not sure what else to try. What ROM are you running?
Its been fixed. Just had to go to settings and storage and mount internal.
man i must sound like a real noob but how in the hell can you transfer files from a sd card or usb drive to the iconia they both show in applications tried drive mount they wont mount tried es file explorer see usb drive and sd storage when i open them there isnt anything in them i have clockwork installed and rooted with iconia root i can install other roms if i put sd card in a card reader to tranfer files wont even see in my computer i see storage but nothing in there either any help is appreciated driving me nuts only in xoom rom can i see storage on computer actually shows 2 drives
In file managers you'll find them under /mnt/ The sd is actually under "external_sd" and the usb is something similar like "usb_drive"
If you have been saving things so far they are most likely in the internal storage which is actually mounted as if it's an internal sd card (/sdcard/ or /mnt/internal_sd i think).
I have used my USB Thumb Drive with my TPTablet before but today it killed the drive.
Plugged it in and it was not recognized.
Went to setting and the "mount USB" was pale and I could not get it to go on.
When I plugged the TDrive back in my PC it told me that it had to be formatted.
What is going on??
This is 64 GB Kensington DataTraveler, formatted exFAT.
The funny thing is the same drive worked before. I'm afraid to try my new 128 GB drive now as I don't want it bricked.
Still not working
I found a utility that allowed me to format to FAT32 but the TPT is still not recognizing it.
I have tried it with the TPT on and with it off, it still tells me that there is nothing availale and I cannot click on the "mount the disk" tab in settings.
Help please
Ok, So I used to use a moto G. On that the OTG used to work like the usb on my laptop plug in a Fat32 drive and it'll easily read and write to it no problem.
But I switched to a Moto X Style with marshmallow and when I first connected a Fat32 formatted pendrive it asked me to reformat it to make it work on the phone. Which I did, after that in ES File explorer theres another folder within the root of the USB drive to which I can write but those files cant be seen on my computer or any other computer for that matter, just the phone. Cant even see that folder anywhere else.
??
What the hell is up with the OTG? How can I access my drives without having to format them and retain write capability as well as the ability to read my written files on windows and what not? Its a new phone so I do not want to root it.
Thanks for the help.
You may have messed up somewhere by formatting it into internal storage or something.
Backup all files from the pen and format it in you pc to either fat32 or exfat depending on drive capacity and needs, eject it and plug it into the phone. It should work fine, also always eject drive before disconnecting it from the phone and if your pc says the drive has issues and wants to fix them ignore it.
kadopt said:
You may have messed up somewhere by formatting it into internal storage or something.
Backup all files from the pen and format it in you pc to either fat32 or exfat depending on drive capacity and needs, eject it and plug it into the phone. It should work fine, also always eject drive before disconnecting it from the phone and if your pc says the drive has issues and wants to fix them ignore it.
Click to expand...
Click to collapse
Well it formatted it as portable storage. I tried reformatting to Fat32 from my computer but the same thing happened it wouldnt open unless I formatted it for the phone. What gives? And yeah I know microsofts error thingy does more harm than good.
UPDATE:
Its working now, reformatted using my windows machine. Was using a mac before but for some reason the phone just doesnt like the way the mac reformats it. However my SanDisk ultra dual usb still wont work. Time to buy a new otg pendrive.