EN.US --->>
Hello! I have a problem with installing any type of ROM from the roms (Stock) Up to the roms (Custom) on my Nexus 4 (Mako), my android is in the stock version, 4.2.2 Jelly Bean, this is with the bootloader (TWRP), I already tested several Custom (Recovery), at the time that I will install any type of rom, installs quietly, however at the time I connect the phone to use the ROM, the mobile phone is With (Bootloop), stops at the boot screen, and nothing comes out.
I believe that this problem someone from the forum, already had, and I really need help even.
* I'm from Brazil, sorry for the spelling mistakes.
PLEASE HELP ME..
PT.BR --->>
Olá! gênios dos XDA, estou com problemas ao instalar qualquer tipo de rom desde a roms (Stock) Até as roms (Custom) no meu Nexus 4 (Mako), meu android esta na versão stock, 4.2.2 Jelly Bean, esta com o bootloader debloqueado, esta com um recovery customizado, o (TWRP), já testei vários Custom (Recovery), ná hora que vou instalar qualquer tipo de rom, instala tranquilo, porém na hora de eu ligar o celular para usar a ROM, o celular fica com (Bootloop), fica parado na tela de inicialização, e não sai nada.
Creio eu que este problema alguém daqui do fórum, ja teve, e eu preciso muito de ajuda mesmo.
*Nota sou do (Brazil), desculpem os erros ortográficos.
POR FAVOR ME AJUDEM..
What recovery version do you have? Are you doing a clean flash?
Nitin
after reading a lot of forums i learned that the boot loop is because if your phone was ever repaired it might have a cable or connecter loose when android boots for the first time it performs a check i found that my headphone jack along with proximity sensor cable was unplugged upon plugging them in my nexus started booting and running all roms fine
kbajwawt said:
after reading a lot of forums i learned that the boot loop is because if your phone was ever repaired it might have a cable or connecter loose when android boots for the first time it performs a check i found that my headphone jack along with proximity sensor cable was unplugged upon plugging them in my nexus started booting and running all roms fine
Click to expand...
Click to collapse
Hearing this for the first time. Can you link me to the posts from where you read this?
BTW, congratulations on booting it
Nitin
nitin.chobhe said:
Hearing this for the first time. Can you link me to the posts from where you read this?
BTW, congratulations on booting it
Nitin
Click to expand...
Click to collapse
From Android Central (sorry can't post links but google the quoted text below and you will find it
"Read post by Tony Porter1
Tony Porter1
This happened to me, half a day on boot animations - then I re-checked my connections on the motherboard - you've just missed connecting something, I missed connecting the headphone connector - worked like a charm afterwards
CheesOnToast
05-19-2014 02:16 PM"
Related
Hey All !
I'll appreciate any help you can give me.
I'm from Portugal, and i've bought my X10 to a guy, it bought it on Spain, i've guarantee but ...
On the first day i've the phone, i did it the root process, so i dond try to charge it on the wall ...
I've rooted it, last FW, and the battery drains as normal after 18 hours, nothing strange on that.
For my surprise, when i went to charge my X10 on wall charger, it blinks up, boots up Sony Ericsson Screen, and starts android O.S. (it pause on lock screen, as normal boot,), and i can use the O.S, if i want, but, it charges!
But, this i not normal...i can charge X10 while it is OFF right ?
Is this a problem? Hardware problem? I've been reading some posts but, on other posts what i've been read, x10 dont charge, here it charge, but, boots up!
Can anyone explain me please in this thread? I've read several times other, my english is not very very good but i understand a little, i think my situation is different.
Am i doing anything wrong ? Please help.
You can't charge it 'off' I switches 'on' by default when charged
Its True? Turns on Automatically when charging?
Bennachie said:
You can't charge it 'off' I switches 'on' by default when charged
Click to expand...
Click to collapse
Its true? you'r god !!!
tens de ter mais calma xD
é normal, o telemovel liga sempre quando o carregas, mesmo que esteja desligado xp
já tenho um desde o dia em que saiu, é um optimo telemovel
Hello!
Jonika21 said:
tens de ter mais calma xD
é normal, o telemovel liga sempre quando o carregas, mesmo que esteja desligado xp
já tenho um desde o dia em que saiu, é um optimo telemovel
Click to expand...
Click to collapse
Hey, um Tuga! és de cá ou do Brasil? Obrigado pela dica..estava a ficar preocupado, sou muito nervoso! LOL
Tens MSN ou algo para falarmos em Portugues do X10 e que mais seja?
Cumpts
-------------------------
Thank you for your advice, i've beeing allarmed !
Hello, my milestone 2 is with the rentail official rom, version 2.3.6 of Brazil. And currently I am interested in two customs roms:
cm72-111215.1631-nightly-Milestone2-GB-v1.3 and Argen2Stone30. Both for GB kernel.
I can restore these roms on my phone without problems? Argen2Stone30 recommends version 2.3.4 rentail UK to apply the path, but is it really necessary? Multiupload is offline now and I can not download the 2.3.4 UK.
Thanks for the help.
I am writting this with A3S with 2.3.6
Works ok
Sorry my bad english
Desde el ñoba usando Tapatalk
Hello friend. Really thanks for the reply.
Here's an error happening when I perform the restore with ArgentoStone 3.
After checking the checksum (nandroid.md5), an restoration error occurs.
The ArgentoStone's zip not have a boot.img. So I tried to restore this file by ClockworkMod. But this procedure also resulted in an error when writing the file.
You had to do something more besides restore using nandroid?
See you soon and thanks for the help.
I had no problems with the installation.. perhaps the file was corrupt in the downloading..
Download again the zip and then try to restore again the nandroid using "Advance Restore"...
BTW waht version of cwm do you have? because I used cwm 5 to restor the nand..
and the A3S's zip not have a boot.img because is only a System nand..
Version 5??
Hey I'm still using version 3.1.0.0 that came with the Droid 2 Recovery Bootstrap.
You installed your ClockworkMod directly by Rom Manager?
Probably this is the reason for my restoration errors.
Is there any difference between using the Droid 2 Recovery Bootstrap or Rom manager?
I think i can't update the ClockworkMod of Droid 2 Recovery Bootstrap to version 5.
Really thanks for the help.
Hello, I updated the Droid 2 Recovery Bootstrap to version 1.0.0.5 and the CWM has been updated automatically.
Now the restore process works normally.
Even so the rom did not work.
Wipe the cache, wipe davik, wipe the battery, after that apply the restoration.
When I restart the phone, the animation boot of ArgentoStone appears, but the boot of operating system does not occur.
Does anyone know why this happens?
Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!
benito.brazil said:
Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!
Click to expand...
Click to collapse
If you have bootloader 3, you can try Endless7 downgrade method... see the topic to learn how to check and downgrade: http://forum.xda-developers.com/showthread.php?t=1497263
Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.
igor.mr said:
Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.
Click to expand...
Click to collapse
wow Thank you.
According to this tutorial, it is still necessary to perform the downgrade kernel to install these custom roms.
Arriving home, I'll try to install the rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 without performing the downgrade to see if it works.
If not work, I think the downgrade is my last option. XD
Thank you.
wow Obrigado.
Segundo esse tutorial, ainda é necessario realizar o downgrade de kernel para se instalar essas custom roms.
Chegando em casa eu irei testar instalar a rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 sem realizar o downgrade, para ver se isso funciona.
Caso não funcione, creio que o downgrade seja a minha ultima opção. XD
Obrigado.
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).
lampwarez said:
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).
Click to expand...
Click to collapse
Thanks, now I understand.
So, I just do the downgrade of the endless, then the installation of CyanogenMod will work, right?
I think this method will not do the installation of ArgentoStone work, since it is a different build.
Many people are having the same problem that I with ArgentoStone and nobody knows how to solve it.
According to the forum, it should work normally on 2.3.4 or 2.3.6 UK BR.
If someone needs the sbf 2.3, to install ArgentoStone. Here are some links, as Multiupload is offline.
http://www.wupload.com.br/file/2602239057 2.3.4 UK
http://depositfiles.com/files/g7p3llfm5 2.3.6 BR
http://www.fileserve.com/file/fvb7Vn3
caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
I dont know anything about CM because I never install that rom..
But I'm still using A3S in 2.3.6 kernel... I use last version of 2nd init port to defy by walter79 (from MS2Ginger rom), I not use Droid 2 recovery bootstrap..
http://www.4shared.com/zip/z_zeYLEn/bootmenu110-CWM5032Milestone2.html
There's the lates bootmenu, just install it in CWM. As for the bootlooping, you might have to wipe your data,cache and dalvik after you install the bootmenu...
Boa noite!
Amigos sou do BRASIL, não tenho muito domínio de inglês mas sempre acompanho o xda. Agora estou com o nexus 4 estava usando a 4.3 original com o root liberado quando ponho ele para carregar o mesmo simplismente para de carregar, ligo e desligo o aparelho e ele volta a carregar, engraçado que tinha o galaxy nexus e enfrentava o mesmo problema! Hoje estou utilizando a crDroid N4 e esse problema persiste, preciso de ajuda amigos!
Please post questions in the Q&A section.
Some roms will give issues with charging. You should restore your device to factory stock first to see if the issue goes away: http://forum.xda-developers.com/showthread.php?t=2534160
If trying others roms and stock don't work, try replacing your usb charging board: http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=nexus+4+usb+charging+port+replacement
Or you can use a wireless charger: www.ebay.com/sch/?_nkw=qi charger
You can also search other threads to see if you can find a solution: http://forum.xda-developers.com/search.php?searchid=235446412
eksasol said:
Please post questions in the Q&A section.
Some roms will give issues with charging. You should restore your device to factory stock first to see if the issue goes away: http://forum.xda-developers.com/showthread.php?t=2534160
If trying others roms and stock don't work, try replacing your usb charging board: http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=nexus+4+usb+charging+port+replacement
You can also search other threads to see if you can find a solution: http://forum.xda-developers.com/search.php?searchid=235446412
Or you can use a wireless charger: www.ebay.com/sch/?_nkw=qi charger
Click to expand...
Click to collapse
O aparelho carrega normal desligado, seria mesmo defeito na peça?
Aluisio Jr said:
O aparelho carrega normal desligado, seria mesmo defeito na peça?
Click to expand...
Click to collapse
It could be due to the custom kernel or roms, I had an issue like this before, try to use stock kernel and stock rom and see if it help. I recommend flashing factory firmware first.
Try 'usar cabos diferentes, carregadores diferentes'.
eksasol said:
It could be due to the custom kernel or roms, I had an issue like this before, try to use stock kernel and stock rom and see if it help. I recommend flashing factory firmware first.
Try 'usar cabos diferentes, carregadores diferentes'.
Click to expand...
Click to collapse
Ok vou seguir suas dicas! Obrigado pela atenção! abraços!
You are allowed to post in your native language as long as you also include English translations.
Thank you
crachel said:
You are allowed to post in your native language as long as you also include English translations.
Thank you
Click to expand...
Click to collapse
I will use the google translator, ok?
Aluisio Jr said:
I will use the google translator, ok?
Click to expand...
Click to collapse
That is fine.
Problem solved, with the original rom without root and the machine loads normally. But with the root problem persists on some charges, but changed the cable and now is loading Normal, thank you friends!:laugh::good:
everytime I try to install one custom rom my smart enters an extreme brick whatever rom cm miui cloudy . someone already fears this problem or can help me ?
((toda vez que tento instalo uma custom rom meu smart entra em um extreme brick seja qual for a rom cm miui cloudy. alguém ja teme este problema ou pode me ajudar ?))
Correct bootloader?
YES
bravho said:
correct bootloader?
Click to expand...
Click to collapse
follow the scratches on the tutorial roms that tested
tested on the versions 6.0.1/7.0/7.1.1 any patch
English
I used a blankflash and longer able to help several friends !!
1st format your Windows to version 7 and install all drivers PC and no Motorola
2st if you are mode qs_bulk install this driver Windows, this driver tb serves to win 7 qdloader pm-USB driver 32/64 bit latest 2017 signed version: http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3st download the firmware stock can be the first version or the last
4st after your device JA is being recognized as use this blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK click qboot.bat after volume and power pressured connect to the PC wait finish the procedure reconfiguration of bootloader
5st as soon as finish it will be recognized as fastboot Addison's intale manually this driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6st so recognize as ADB Android interface in device manager try flashear the ROM by RSD Lite if not be able to use the 7
7 download the ADB + relock bootoader this link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copy everything to folder of stock ROM and run the relock mode fastboot wait finish and be happy your device restart with soon official and OEM blocked again
good luck
who are unable to and has interest of aid I help make the 1st and 3rd step I can help via teamviewer please contact me by my email [email protected] or ZAP +55 (16) 996306525
in my video relock on YouTube has feedback positive who helped check
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
if liked the content if sign up in my channel
https://www.youtube.com/c/jaderalves
help me !!
Testado nas versões 6.0.1/7.0/7.1.1 qualquer patch
PT-BR
Eu usei um blankflash e já consegui ajudar varios amigos !!
1º formate seu windows para versao 7 e instale todos os drivers do pc e nenhum da motorola
2ª se estiver em modo qs_bulk instale esse driver windows ,este driver tb serve para o win 7
QDLoader HS-USB Driver 32/64 bit
Latest 2017 signed version : http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3º baixe o firmware stock pode ser a primeira versao ou a ultima
4º depois que seu aparelho ja estiver sendo reconhecido como use este blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK clique em qboot.bat depois com volume e power pressionados conecte ao pc espere terminar o procedimento de reconfiguraçao de bootloader
5º logo que terminar ele será reconhecido como fastboot addison S intale manualmente este driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6º assim que reconhecer como adb android interface no gerenciador de dispositovos tente flashear a rom pelo rsd lite se nao conseguir use a opcao 7
7º baixe o ADB+relock bootoader deste link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copie tudo para pasta da stock rom e execute o relock mode fastboot espere terminar e seja feliz seu aparelho reiniciara com logo oficial e com oem bloqueado novemente
Boa Sorte
Quem não conseguir e tiver interesse de uma ajuda eu ajudo faça o 1º e 3º passo que posso ajudar via teamviewer entre em contato comigo pelo meu email [email protected] Ou ZAP +55 (16) 996306525
no meu video de relock no youtube tem feedback positivos de quem ajudei verifique
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
se gostou do conteudo se increva no meu canal
https://www.youtube.com/c/jaderalves
me ajude !!
Mod Edit: Placed English first, then translation below.
Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.
tiago1966 said:
Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.
Click to expand...
Click to collapse
Clique no gostei para agradecer por favor na postagem original obrigado
Click on the I liked it to thank you in the original post thank you
report my post Supah Cookie for putting a procedure in 2 languages among them the English the post is mine and put it the way I want it clear respecting the rule of being posted in English
SupahCookie said:
Rules... English only
Click to expand...
Click to collapse
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?
dandrumheller said:
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?
Click to expand...
Click to collapse
Yes I don't see problem in posting in the native language since there is a translation for the English present in the post that Supahcokkie is catching on my foot because of a post of him that I copied part, but I will redo a relock post that I developed with just a click and a rom
SupahCookie said:
I think not..
Click to expand...
Click to collapse
Looks to me he would be just fine if he moved the English section to the top of the post...
* * * REMINDER * * *
Posting in a language other than English IS ALLOWED, as long as the English portion of the comment is FIRST, and the translation is SECOND.
For those who think they know the Forum Rules, you can refresh your memories HERE.
Please post with respect and not YELLING or insults. Thanks.
tl;dr
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
.........................................................................
* * * LEMBRETE * * *
A publicação em um idioma que não seja inglês É PERMITIDO, desde que a parte em inglês do comentário seja PRIMEIRA, e a tradução é SEGUNDA.
Para aqueles que pensam conhecer as Regras do Fórum, você pode atualizar suas memórias AQUI .
Por favor, poste com respeito e não YELLING ou insultos. Obrigado.
tl dr dr
4. Use a língua inglesa.
Nós entendemos isso com todas as diferentes nacionalidades, nem todos falam inglês bem, mas tente. Se você realmente não conseguir postar em inglês, use um tradutor online. Você pode incluir sua mensagem original em seu próprio idioma, abaixo da tradução em inglês. (Esta regra abrange suas postagens, entradas de perfil e assinatura).
And now this is a great tutorial. Mod you can pin this if you feel so.
DeHuMaNiZeD said:
And now this is a great tutorial. Mod you can pin this if you feel so.
Click to expand...
Click to collapse
Thanks
Jaderalves said:
Thanks
Click to expand...
Click to collapse
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120
KrisM22 said:
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
Click to expand...
Click to collapse
Really work thnk for comment
check links in OP please.
KrisM22 said:
check links in OP please.
Click to expand...
Click to collapse
links checked thanks
for me is working in Win 10... win7 is not mandatory
Raphael VR6 said:
for me is working in Win 10... win7 is not mandatory
Click to expand...
Click to collapse
Excellent!!!
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.
KrisM22 said:
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.
Click to expand...
Click to collapse
Thanks!
edit: I managed to fix it! Again, thanks!
yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
nao nao funciona mas eu arrumo pra vc