Database Users

[Q] Customs Roms in 2.3.6 rentail.

Hello, my milestone 2 is with the rentail official rom, version 2.3.6 of Brazil. And currently I am interested in two customs roms:
cm72-111215.1631-nightly-Milestone2-GB-v1.3 and Argen2Stone30. Both for GB kernel.
I can restore these roms on my phone without problems? Argen2Stone30 recommends version 2.3.4 rentail UK to apply the path, but is it really necessary? Multiupload is offline now and I can not download the 2.3.4 UK.
Thanks for the help.

I am writting this with A3S with 2.3.6
Works ok
Sorry my bad english
Desde el ñoba usando Tapatalk

Hello friend. Really thanks for the reply.
Here's an error happening when I perform the restore with ArgentoStone 3.
After checking the checksum (nandroid.md5), an restoration error occurs.
The ArgentoStone's zip not have a boot.img. So I tried to restore this file by ClockworkMod. But this procedure also resulted in an error when writing the file.
You had to do something more besides restore using nandroid?
See you soon and thanks for the help.

I had no problems with the installation.. perhaps the file was corrupt in the downloading..
Download again the zip and then try to restore again the nandroid using "Advance Restore"...
BTW waht version of cwm do you have? because I used cwm 5 to restor the nand..
and the A3S's zip not have a boot.img because is only a System nand..

Version 5??
Hey I'm still using version 3.1.0.0 that came with the Droid 2 Recovery Bootstrap.
You installed your ClockworkMod directly by Rom Manager?
Probably this is the reason for my restoration errors.
Is there any difference between using the Droid 2 Recovery Bootstrap or Rom manager?
I think i can't update the ClockworkMod of Droid 2 Recovery Bootstrap to version 5.
Really thanks for the help.

Hello, I updated the Droid 2 Recovery Bootstrap to version 1.0.0.5 and the CWM has been updated automatically.
Now the restore process works normally.
Even so the rom did not work.
Wipe the cache, wipe davik, wipe the battery, after that apply the restoration.
When I restart the phone, the animation boot of ArgentoStone appears, but the boot of operating system does not occur.
Does anyone know why this happens?

Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!

benito.brazil said:
Hello, I'm here with the same problem... I upated my MS2 2.2 Retail to the 2.3.6 BR official from Moto and now I need a call recorder, that in MS2 just have at a CM7 Custom Rom, but I'm serching a way to downgrade to 2.2 and later install the CM7 with a native Call Recorder and I really started to think that it's impossible!
I really don't know what to do... I need this call recorder because I'm being threatened by my lawyer and I have to record all calls... I'm thinking in buy an other smartphone today to get this function.... Please, help me!
Click to expand...
Click to collapse
If you have bootloader 3, you can try Endless7 downgrade method... see the topic to learn how to check and downgrade: http://forum.xda-developers.com/showthread.php?t=1497263

Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.

igor.mr said:
Amigos brasileiros, como meu ingRês é "very worst" vou "falar" em português mesmo.
Tive o mesmo problema, usava a CM7 e adorava , mas achei a bateria estava durando muito pouco, e instalei via RSD a 2.3.6 no milestone 2, mas no primeiro dia já me arrependi, ontem tentei voltar pra cm7, instalei o bootstrap recovery, dei o boot recovery por ele, instalei o bootmenu, mandei instalar a CM7 e aparentemente tinha funcionado, quando dei o reboot ... nada feito, ele não inicia, vc repara que o backlight acende, a tela fica levemente iluminada mas ele não faz nada, fica mortão, aí fui pelo RSD de novo instalar a 2.3.6 e ele recuperou a instalação anterior, com todos os apps e configurações, ou seja, nem chegou a instalar a cm7 só deve ter corrompido algo do boot.
Estou desde ontem procurando uma solução e achei esse tópico "Tutorial: Custom Rom Para Milestone 2 Com Rom Retail 2.3.6" no androidz.com.br, mas aqui no trabalho não tenho como fazer, e os links de download estão quebrados ... como sou novo, não posso postar o link aqui.
Click to expand...
Click to collapse
wow Thank you.
According to this tutorial, it is still necessary to perform the downgrade kernel to install these custom roms.
Arriving home, I'll try to install the rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 without performing the downgrade to see if it works.
If not work, I think the downgrade is my last option. XD
Thank you.
wow Obrigado.
Segundo esse tutorial, ainda é necessario realizar o downgrade de kernel para se instalar essas custom roms.
Chegando em casa eu irei testar instalar a rom cm72-111215.1631-nightly-Milestone2-GB-v1.3 sem realizar o downgrade, para ver se isso funciona.
Caso não funcione, creio que o downgrade seja a minha ultima opção. XD
Obrigado.

The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.

caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).

lampwarez said:
We can not install custom nor earlier original roms directly over original GB due to lack of signatures on it. Endless7 method uses a chinese rom with all the required signatures to allow downgrade, follow it (unless you are in VIVO GB).
Click to expand...
Click to collapse
Thanks, now I understand.
So, I just do the downgrade of the endless, then the installation of CyanogenMod will work, right?
I think this method will not do the installation of ArgentoStone work, since it is a different build.

Many people are having the same problem that I with ArgentoStone and nobody knows how to solve it.
According to the forum, it should work normally on 2.3.4 or 2.3.6 UK BR.
If someone needs the sbf 2.3, to install ArgentoStone. Here are some links, as Multiupload is offline.
http://www.wupload.com.br/file/2602239057 2.3.4 UK
http://depositfiles.com/files/g7p3llfm5 2.3.6 BR
http://www.fileserve.com/file/fvb7Vn3

caronteccl said:
The cm72-111215.1631-nightly-GB-v1.3-Milestone2 really did not work applied directly on the 2.3.6 rom rentail BR. I believe I'll try to downgrade now.
JoseBerga, you really could do this process? Whenever I try, the system does not boot.
Thanks.
Click to expand...
Click to collapse
I dont know anything about CM because I never install that rom..
But I'm still using A3S in 2.3.6 kernel... I use last version of 2nd init port to defy by walter79 (from MS2Ginger rom), I not use Droid 2 recovery bootstrap..
http://www.4shared.com/zip/z_zeYLEn/bootmenu110-CWM5032Milestone2.html
There's the lates bootmenu, just install it in CWM. As for the bootlooping, you might have to wipe your data,cache and dalvik after you install the bootmenu...

[Q] Battery won't charge fully, CM7.2

English version:
Well....I'm having problem with my battery, where it doesn't charge up to 100%, stay on 83%.
I've tried to calibrate using the app from app store, the battery calibration, but i don't get charge up to 100%, the maximum that i get was 86% after use the application so much times.
Withdraw the battery when it was charging don't fixed the problem....
I thought in use the battery calibration until arrive at 100%, if possible, and try calibrate, but it would take a few days.....
Someone have a solution?
Versio ROM: Cyanogen7.2 euroskank
My gadget: Defy+ MB526.
Sorry for my english.
Thanks for the attention, cya.
Portuguese version:
Bem....Estou tendo problema com minha bateria, onde ela não carrega até 100%, ela fica parada até 83%.
Tentei calibrar usando o aplicativo da app store, battery calibration, e não consegui fazer carregar até 100%, o máximo que chegou foi 86%, depois de usar várias vezes o aplicativo.
Remove-la enquanto está carregando também não resolveu este problema.
Pensei em ficar usando o battery calibration até chegar em 100%, se é que conseguiria, e depois tenta-la calibrar, mas isso levaria alguns dias....
Alguém tem alguma solução ?
Versão da ROM: Cyanogen7.2 euroskank
Meu gadget: Defy+ MB526.
Obrigado pela atenção, até logo.

Rinosoro said:
English version:
Well....I'm having problem with my battery, where it doesn't charge up to 100%, stay on 83%.
I've tried to calibrate using the app from app store, the battery calibration, but i don't get charge up to 100%, the maximum that i get was 86% after use the application so much times.
Withdraw the battery when it was charging don't fixed the problem....
I thought in use the battery calibration until arrive at 100%, if possible, and try calibrate, but it would take a few days.....
Someone have a solution?
Versio ROM: Cyanogen7.2 euroskank
My gadget: Defy+ MB526.
Sorry for my english.
Thanks for the attention, cya.
Portuguese version:
Bem....Estou tendo problema com minha bateria, onde ela não carrega até 100%, ela fica parada até 83%.
Tentei calibrar usando o aplicativo da app store, battery calibration, e não consegui fazer carregar até 100%, o máximo que chegou foi 86%, depois de usar várias vezes o aplicativo.
Remove-la enquanto está carregando também não resolveu este problema.
Pensei em ficar usando o battery calibration até chegar em 100%, se é que conseguiria, e depois tenta-la calibrar, mas isso levaria alguns dias....
Alguém tem alguma solução ?
Versão da ROM: Cyanogen7.2 euroskank
Meu gadget: Defy+ MB526.
Obrigado pela atenção, até logo.
Click to expand...
Click to collapse
Get the battery fix.

hotdog125 said:
Get the battery fix.
Click to expand...
Click to collapse
Where can i get this battery fix?

Rinosoro said:
Where can i get this battery fix?
Click to expand...
Click to collapse
I'm sorry but i'm not sure. Search on Google.
EDIT - Try http://forum.xda-developers.com/attachment.php?attachmentid=1895064&d=1366373440">Defy+battery.zip

hotdog125 said:
I'm sorry but i'm not sure. Search on Google.
EDIT - Try http://forum.xda-developers.com/attachment.php?attachmentid=1895064&d=1366373440">Defy+battery.zip
Click to expand...
Click to collapse
Hmm, right.
How can i install this ?

Rinosoro said:
Hmm, right.
How can i install this ?
Click to expand...
Click to collapse
Flash through recovery

hotdog125 said:
Flash through recovery
Click to expand...
Click to collapse
Right....I'll try, but I'm a little afraid of doing wrong.
Thanks for helping =)

Rinosoro said:
Right....I'll try, but I'm a little afraid of doing wrong.
Thanks for helping =)
Click to expand...
Click to collapse
dont worry , it will work . and if it doesn't work just flash another battery fix

I had same charging problem while nandroid restoring cm7.2 with CWM and wiping data and reinstalling ROM could solve the issue. Just try to backup app&data and wipe data and reinstall your ROM.(and restore backup)
Sent from my IM-A840S using xda app-developers app

14Hellraiser said:
dont worry , it will work . and if it doesn't work just flash another battery fix
Click to expand...
Click to collapse
Oh sure.... but how can i see if fix really works?
I see after charged the battery was showing 82%, flashing the fix the battery up to 84%, it is a signal ?
D-Phi said:
I had same charging problem while nandroid restoring cm7.2 with CWM and wiping data and reinstalling ROM could solve the issue. Just try to backup app&data and wipe data and reinstall your ROM.(and restore backup)
Sent from my IM-A840S using xda app-developers app
Click to expand...
Click to collapse
Yeah, this is a alternative way.
I will try some things, and reinstall the ROM is a last option, but is a right option that i do if not work.
Thanks for all =)

English Version:
Sorry for the up.
I have a other problem now.... I had a drop on my battery, where this was at 15% when i unlocked the screen the battery came to 4% and i put to charge.
I had has problem with the battery that don't charged at 100%, so i did use the battery fix and now, i don't know what i can do.
I use the Battery Callibration app to callibrate too, that i saw in various forums.
This problem was because i use the Battery Callibration ?
I'm using CM7.2.
Thanks for attention.
Versão Brasileira:
Desculpe pelo up.
Agora estou tendo outro problema com minha bateria.... Eu tive um drop da battery, onde ela se encontrava em 15% e logo quando
abri a tela inicial ela caiu para 4% e eu coloquei para carrega-la.
Eu tive problemas com a bateria onde ela não carregava até 100%, então eu usei um battery fix encontrado aqui, e agora eu não sei o que posso fazer.
Eu usei o aplicativo Batery Callibration da google store, como havia visto em vários fóruns.
Este problema foi causado porque eu usei o Battery Callibration?
Estou usando CM7.2.
Obrigado pela atenção.

drop bateria
Rinosoro said:
Oh sure.... but how can i see if fix really works?
I see after charged the battery was showing 82%, flashing the fix the battery up to 84%, it is a signal ?
Yeah, this is a alternative way.
I will try some things, and reinstall the ROM is a last option, but is a right option that i do if not work.
Thanks for all =)
Click to expand...
Click to collapse
estou tendo o mesmo problema com o meu defy !! mais irei tentar este fix tambem !! obrigado

(NEED HELP) Loop when installing any rom in (N4)

EN.US --->>
Hello! I have a problem with installing any type of ROM from the roms (Stock) Up to the roms (Custom) on my Nexus 4 (Mako), my android is in the stock version, 4.2.2 Jelly Bean, this is with the bootloader (TWRP), I already tested several Custom (Recovery), at the time that I will install any type of rom, installs quietly, however at the time I connect the phone to use the ROM, the mobile phone is With (Bootloop), stops at the boot screen, and nothing comes out.
I believe that this problem someone from the forum, already had, and I really need help even.
* I'm from Brazil, sorry for the spelling mistakes.
PLEASE HELP ME..
PT.BR --->>
Olá! gênios dos XDA, estou com problemas ao instalar qualquer tipo de rom desde a roms (Stock) Até as roms (Custom) no meu Nexus 4 (Mako), meu android esta na versão stock, 4.2.2 Jelly Bean, esta com o bootloader debloqueado, esta com um recovery customizado, o (TWRP), já testei vários Custom (Recovery), ná hora que vou instalar qualquer tipo de rom, instala tranquilo, porém na hora de eu ligar o celular para usar a ROM, o celular fica com (Bootloop), fica parado na tela de inicialização, e não sai nada.
Creio eu que este problema alguém daqui do fórum, ja teve, e eu preciso muito de ajuda mesmo.
*Nota sou do (Brazil), desculpem os erros ortográficos.
POR FAVOR ME AJUDEM..

What recovery version do you have? Are you doing a clean flash?
Nitin

after reading a lot of forums i learned that the boot loop is because if your phone was ever repaired it might have a cable or connecter loose when android boots for the first time it performs a check i found that my headphone jack along with proximity sensor cable was unplugged upon plugging them in my nexus started booting and running all roms fine

kbajwawt said:
after reading a lot of forums i learned that the boot loop is because if your phone was ever repaired it might have a cable or connecter loose when android boots for the first time it performs a check i found that my headphone jack along with proximity sensor cable was unplugged upon plugging them in my nexus started booting and running all roms fine
Click to expand...
Click to collapse
Hearing this for the first time. Can you link me to the posts from where you read this?
BTW, congratulations on booting it
Nitin

nitin.chobhe said:
Hearing this for the first time. Can you link me to the posts from where you read this?
BTW, congratulations on booting it
Nitin
Click to expand...
Click to collapse
From Android Central (sorry can't post links but google the quoted text below and you will find it
"Read post by Tony Porter1
Tony Porter1
This happened to me, half a day on boot animations - then I re-checked my connections on the motherboard - you've just missed connecting something, I missed connecting the headphone connector - worked like a charm afterwards
CheesOnToast
05-19-2014 02:16 PM"

[GUIDE] Hardbrick Moto Z Play 100%working PT-BR/English [SOLVED]

tested on the versions 6.0.1/7.0/7.1.1 any patch
English
I used a blankflash and longer able to help several friends !!
1st format your Windows to version 7 and install all drivers PC and no Motorola
2st if you are mode qs_bulk install this driver Windows, this driver tb serves to win 7 qdloader pm-USB driver 32/64 bit latest 2017 signed version: http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3st download the firmware stock can be the first version or the last
4st after your device JA is being recognized as use this blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK click qboot.bat after volume and power pressured connect to the PC wait finish the procedure reconfiguration of bootloader
5st as soon as finish it will be recognized as fastboot Addison's intale manually this driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6st so recognize as ADB Android interface in device manager try flashear the ROM by RSD Lite if not be able to use the 7
7 download the ADB + relock bootoader this link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copy everything to folder of stock ROM and run the relock mode fastboot wait finish and be happy your device restart with soon official and OEM blocked again
good luck
who are unable to and has interest of aid I help make the 1st and 3rd step I can help via teamviewer please contact me by my email [email protected] or ZAP +55 (16) 996306525
in my video relock on YouTube has feedback positive who helped check
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
if liked the content if sign up in my channel
https://www.youtube.com/c/jaderalves
help me !!
Testado nas versões 6.0.1/7.0/7.1.1 qualquer patch
PT-BR
Eu usei um blankflash e já consegui ajudar varios amigos !!
1º formate seu windows para versao 7 e instale todos os drivers do pc e nenhum da motorola
2ª se estiver em modo qs_bulk instale esse driver windows ,este driver tb serve para o win 7
QDLoader HS-USB Driver 32/64 bit
Latest 2017 signed version : http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
3º baixe o firmware stock pode ser a primeira versao ou a ultima
4º depois que seu aparelho ja estiver sendo reconhecido como use este blankflash https://drive.google.com/open?id=1fh1R1PcPb_SUQxbMQ18uD7VKcQ31ZPmK clique em qboot.bat depois com volume e power pressionados conecte ao pc espere terminar o procedimento de reconfiguraçao de bootloader
5º logo que terminar ele será reconhecido como fastboot addison S intale manualmente este driver https://drive.google.com/open?id=1Nob-tWEHBD0T6kYrMHROGfDMvBKE0RsE
6º assim que reconhecer como adb android interface no gerenciador de dispositovos tente flashear a rom pelo rsd lite se nao conseguir use a opcao 7
7º baixe o ADB+relock bootoader deste link https://drive.google.com/open?id=1hNvRn7h9WI1FQVzRz3WhUv1nZ4nwWsk_ copie tudo para pasta da stock rom e execute o relock mode fastboot espere terminar e seja feliz seu aparelho reiniciara com logo oficial e com oem bloqueado novemente
Boa Sorte
Quem não conseguir e tiver interesse de uma ajuda eu ajudo faça o 1º e 3º passo que posso ajudar via teamviewer entre em contato comigo pelo meu email [email protected] Ou ZAP +55 (16) 996306525
no meu video de relock no youtube tem feedback positivos de quem ajudei verifique
https://www.youtube.com/watch?v=gC7hZsyvU3o&t=1s
se gostou do conteudo se increva no meu canal
https://www.youtube.com/c/jaderalves
me ajude !!
Mod Edit: Placed English first, then translation below.

Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.

tiago1966 said:
Obrigado, Jader. Isso irá ajudar muita gente.
Tks, Jader. This will help everyone.
Click to expand...
Click to collapse
Clique no gostei para agradecer por favor na postagem original obrigado
Click on the I liked it to thank you in the original post thank you

report my post Supah Cookie for putting a procedure in 2 languages ​​among them the English the post is mine and put it the way I want it clear respecting the rule of being posted in English

SupahCookie said:
Rules... English only
Click to expand...
Click to collapse
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?

dandrumheller said:
It's my understanding that posts in a non English native language that also include an English translation are acceptable. Is this not the case?
Click to expand...
Click to collapse
Yes I don't see problem in posting in the native language since there is a translation for the English present in the post that Supahcokkie is catching on my foot because of a post of him that I copied part, but I will redo a relock post that I developed with just a click and a rom

SupahCookie said:
I think not..
Click to expand...
Click to collapse
Looks to me he would be just fine if he moved the English section to the top of the post...

* * * REMINDER * * *
Posting in a language other than English IS ALLOWED, as long as the English portion of the comment is FIRST, and the translation is SECOND.
For those who think they know the Forum Rules, you can refresh your memories HERE.
Please post with respect and not YELLING or insults. Thanks.
tl;dr
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
.........................................................................
* * * LEMBRETE * * *
A publicação em um idioma que não seja inglês É PERMITIDO, desde que a parte em inglês do comentário seja PRIMEIRA, e a tradução é SEGUNDA.
Para aqueles que pensam conhecer as Regras do Fórum, você pode atualizar suas memórias AQUI .
Por favor, poste com respeito e não YELLING ou insultos. Obrigado.
tl dr dr
4. Use a língua inglesa.
Nós entendemos isso com todas as diferentes nacionalidades, nem todos falam inglês bem, mas tente. Se você realmente não conseguir postar em inglês, use um tradutor online. Você pode incluir sua mensagem original em seu próprio idioma, abaixo da tradução em inglês. (Esta regra abrange suas postagens, entradas de perfil e assinatura).

And now this is a great tutorial. Mod you can pin this if you feel so.

DeHuMaNiZeD said:
And now this is a great tutorial. Mod you can pin this if you feel so.
Click to expand...
Click to collapse
Thanks

Jaderalves said:
Thanks
Click to expand...
Click to collapse
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
look at
https://forum.xda-developers.com/mo...se-attempt-t3812530/post76991120#post76991120

KrisM22 said:
If you wish to you could edit 1st post, advanced, put [GUIDE][addison] in front of title and move solved to end. That might make it easier for folks to find. bricked phones happen and if this works it needs notoriety.
Click to expand...
Click to collapse
Really work thnk for comment

check links in OP please.

KrisM22 said:
check links in OP please.
Click to expand...
Click to collapse
links checked thanks

for me is working in Win 10... win7 is not mandatory

Raphael VR6 said:
for me is working in Win 10... win7 is not mandatory
Click to expand...
Click to collapse
Excellent!!!

Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.

yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.

KrisM22 said:
"Does this guide also work for soft brick? I accepted an OTA update and now got stuck in twrp."
I don't think so - if you can get to TWRP, you can flash a custom ROM, and then use this guide:
https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
but ask there.
Click to expand...
Click to collapse
Thanks!
edit: I managed to fix it! Again, thanks!

yssie said:
Esse guia tambem funciona para soft brick? Aceitei um update OTA e agora ficou preso no twrp.
Click to expand...
Click to collapse
nao nao funciona mas eu arrumo pra vc

Please help me, I updated my MI9t to xiaomi.eu and it answers alone

You can help me with this part, because I can't solve anything, I install other roms, but it stays the same.
Note: My English is not there.

What do u mean by it answers alone ? Phone calls ?

Badis st said:
O que você quer dizer com ele responde sozinho? Telefonemas ?
Click to expand...
Click to collapse
"Sim, como telefonemas.
por exemplo alguém me liga e ele atende sozinho mesmo desabilitando a chamada automática"

GuiKnightIII said:
"Sim, como telefonemas.
por exemplo alguém me liga e ele atende sozinho mesmo desabilitando a chamada automática"
Click to expand...
Click to collapse

Restore the ROM and see if it changes. It has to be some kind of setting

yaro666 said:
Restaure a ROM e veja se muda. Tem que ser algum tipo de configuração
Click to expand...
Click to collapse
E I installed the official ROM, and it didn't work continued with the same problem I installed the official ROM, and it didn't work continued with the same problem

try a hard reset and dont install your back up

tutibreaker said:
tente um hard reset e não instale seu backup
Click to expand...
Click to collapse
tutibreaker said:
try a hard reset and dont install your back up
Click to expand...
Click to collapse
Hi, I did this procedure too, but it didn't work either. And as there was a bug in the general interface of the device, and I've done all these procedures, even blocking the bootloader

have you tried settings in phone app and standard settings?

Settings, type Auto to Search box on top and open Auto-answer - see the screenshot

yaro666 said:
você tenta configurar no aplicativo de telefone e configurações padrão
zgfg said:
Configurações, Auto para caixa de resposta de pesquisa na parte superior digite e abra automática - veja a captura de tela
Click to expand...
Click to collapse
S Yes, I already did this procedure.
Click to expand...
Click to collapse