Good evening,
This is the first time I post here and my GT- I9300I was working but the battery had just quickly ( 1 hour use at most , heated machine ) and my IMEI was null \ null. I bought the unit secondhand but I was trying to solve these problems by odin , I backup the efs folder and etc ... But to try at Odin in any version flash the device came across the error " There's no partition pit ", and in so downloading the message : " mmc write fail" . Soon after I tried to restore the cell the way recovery along with the sd card but without success . I then decided to take a cw and flashing by cell own which caused the device now only is in downloading mode and I can not put him or download mode or turn it again. It already starts in recovery mode! If you can help me thank you !!
* I tried to flash the cw to fix the recovery mode problem that was not able to format the memory card
anyone ? my error is stupid ?
Hi guys I flashed this ROM taken from the Lenovo.ru forum with SP flash tool: S5000_A442_102_081_140609_WW_SMS
I've got three problems:
1) I can't update the system via OTA, it will download the update and then reboot but fails to install it to the end
2) It says IMEI not valid when the display is locked
3) I see a permanent NVRAM WARNING: Err = 0X10 in the wireless net list
Is it possibile to fix my tablet?
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
docizoc said:
Hello,
I have an issue with my brand new G6.
It is in a loop "Your device is corrupt it cannot be trusted and will not boot" , no more recovery available.
What i did:
I unlocked the bootloader and flashed Magisk via TWRP the device displayed that the partition was corrupt and need to be erased.
After that the device was in a loop to twrp, whatever the wipe or ... no system boot.
I read that i had to format the data partition so i adapted a what i found here to my available partitions
https://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386
the device is now in a constant loop.
Does someone can help me please ?
is there any way to recover it ? download mode ? how ?
Update : I succeed to boot into download mode but LGUP gives me an error while trying to flash
error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
Can you boot to TWRP?
Did you make a backup and have access to it? Especially the EFS partition? If you do, restore the EFS partition.
If you can boot to TWRP, try the following:
- wipe everything (the option where you have to type 'yes').
- download lineageOS and flash it. If this is working fine, install whatever ROM you want to install.
no access to twrp anymore , no backup , only access to download mode now
is there a way to flash back twrp or stock recovery from download mode ? boot into fastboot ?
(i know... i have no excuses , but made that so many times without issues ...)
thank you in advance
Maybe you should go in download mode and flash stock Rom with LGUP.
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Can you flash twrp through lgup or fastboot?
For those that could be in the same situation i finally succeed to flash with LGUP last version but without the 8894DLL
the error was probably coming from the dll.
Cheers and thanks all for the answers
docizoc said:
LGUP gives me an error while trying to flash the rom error 0x2000 ... ... cefs::initialize()
Click to expand...
Click to collapse
It's probably a problem with the DLL, try to extract it from the kdz and input it in Lgup folder (I don't remember where and I'm not home, check the main thread for that) and after that retry flashing
EDIT : well you were faster than my phone glad it worked for you.
Hello,
These are what I did:
Installed WDRT
Installed WP Internals v2.8
Attempted to switch to mass storage mode from Manual Mode
It asked to Unlock Bootloader
Took Unlock Bootloader option
Flashing failed when switching to mass storage mode
Phone rebooted to blue screen "Bitlocker key required"
Then I tried almost every steps here on various posts to reset/flash a new rom., it always ends with flash failed or...
I get this error from thor2 when trying to falsh ffu: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.
I am unable to use the emergency mode of thor2 (I have the files needed) as it times out at 'get connectionstring''
I dont know what else to do., Please any help is appreciated
PS: Couple of posts I ve been through
https://forum.xda-developers.com/showthread.php?t=2515453
https://forum.xda-developers.com/wi...nt/fix-dead-phone-bricked-bootloader-t3496232
@Heathcliff74
@DilanChd
@rgxHost
Thanks
V
Days ago , i had an invalid boot image problem when i try to flash lineage os.Then i wiped internal storage and fix mount /data errors.But because of image file somehow my phone model and brand is changed.Then i discovered QFIL and use a solution from here for fix everything.It fixed everything but my phone was in Factory Mode.I tried an file i found on internet for fix and i flashed it with QFIL.But my device not open and i tried to flash qfil and qcn file again.It gives me error every time and i selected erase all before download.But 30 minutes after i press download my pc battery get low and turned off.
Now when i connect my device it says "USB device is not recognized.The last USB device you connected to this computer has malfunctioned and windows doesn't recognize it" . I tried change value of ErrorControl of USBSTOR in regedit but i cant find usbstor.inf in system32 after i did it.Now i have a phone with no vibration , no fastboot ,no recovery, no boot or edl.I tried edl points over and over again and i tried re-install drivers too.I cant see anything cause my phone cant boot.
My Device =Asus Zenfone Max (ZC500KL/ZO10D with Snapdragon 410)
ROM: Stock rom with Factory Mode
QFIL Port : No port (It didn't recognize )
Device Manager : unknown usb device (device descriptor request failed)
Error Code: A request for the USB device descriptor failed. CODE 43
Note:Sorry for my bad English.Please help
I press power button 10 sec and pc can't detect it but qfil can.So i tried again.But it gives me sahara error everytime
I am giving port traces and log files in below