OnePlus 2 not booting into OOS after 'successful' installation - OnePlus 2 Q&A, Help & Troubleshooting

So basically, when I try and install oxygen OS using TWRP(v3.0-0.1) or the OnePlus recovery it just doesn't boot the OS even though the installer said it was successful. After I install the os using the TWRP recovery or OnePlus recovery, it gets stuck on the OnePlus logo. After that, it's like the phone becomes bricked, I can't use the lock+volume up button to boot into fastboot mode, I have to use a qualcomm download tool in order to flash the OS. What's going on here? I've tried this with different OS versions combined with different TWRP versions, all with the same results. Could it be a hard drive issue?
Anyways, all help is appreciated.

Hi...
Firstly, phones don't use hard drive.?
Which version of oos u used before?
Which version u are flashing now?
Did u try flashing custom rom?
Sent from my ONE A2005 using Tapatalk

Brandon Indar said:
Hi...
Firstly, phones don't use hard drive.
Which version of oos u used before?
Which version u are flashing now?
Did u try flashing custom rom?
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I've tried oos v2.2, 3.1, 3.5. I haven't tried a custom rom. I've been sticking with the 3.1 as i've been ****ing around with it.

Related

Revert to 6.0.1 from 7.1.1

Is it possible to rollback to 6.0.1 from 7.1.1?
Ps- I have an unlocked bootloader.
If you have twrp recovery then you can install any 6.01 debloated or full ROM available here as zip files, it is not possible to flash an official 6.01 ROM through fastboot or rsd, it may brick your device.
Please stay in Nougat...
Many people (include me) when downgrade the version.
The phone is dead and without solution...
I buy a new phone.
there is a form to downgrade but its not 100% out of brick.... if you are in official 7.1.1 you have to put another rom.... like lineage or aex ... 7.1.1 then downgrade with a custom rom 6.0.1... later install with fastboot the offcial 6.0.1. plz DONT DOWNGRADE FROM OFFICIAL 7.1.1 TO 6.0.1 (i havent test that... but some people says that it work).
You can try unless you dont want to had brick your device.. Boot loader might have got upgraded along with OS and when u downgrade, even boot loader will be downgraded and it gets corrupted..
Shibin_1985 said:
You can try unless you dont want to had brick your device.. Boot loader might have got upgraded along with OS and when u downgrade, even boot loader will be downgraded and it gets corrupted..
Click to expand...
Click to collapse
Hey Shibin_1985, Before installing official 7.1.1 using fastboot, I made a backup of 6.0.1 using TWRP. I now have 7.1.1 running with TWRP. Can I restore 6.0.1 backup?
mzfr.shh said:
Hey Shibin_1985, Before installing official 7.1.1 using fastboot, I made a backup of 6.0.1 using TWRP. I now have 7.1.1 running with TWRP. Can I restore 6.0.1 backup?
Click to expand...
Click to collapse
By twrp u can i guess.. Am not sure though.. But by adb flashing, u will end up in hard brick..
camilo13ms said:
there is a form to downgrade but its not 100% out of brick.... if you are in official 7.1.1 you have to put another rom.... like lineage or aex ... 7.1.1 then downgrade with a custom rom 6.0.1... later install with fastboot the offcial 6.0.1. plz DONT DOWNGRADE FROM OFFICIAL 7.1.1 TO 6.0.1 (i havent test that... but some people says that it work).
Click to expand...
Click to collapse
Really? i must try it! Anything else i said U! thanks
deguzz322 said:
Really? i must try it! Anything else i said U! thanks
Click to expand...
Click to collapse
U can downgrade to 6.0.1 with in twrp.. No matter u downgrade from stock 7.1.1 or from twrp 6.0.1, boot loader is gonna get downgraded when flashing via adb.. More than 150 devices are hard bricked due to download grading.. Once bricked, there is no other way to get it back to life except jtag emmc flashing (if in India) or to change Mother board which is almost half the price of new MXP.. My bro downgraded MXP and my device was dead for around 2 months.. Later on i got it Jtag flashed from Pune.. There is no Blank flash files available for MXP yet.. So beware.. !!! Don't just mess up a working device, when there is not much solutions to bring it back to life !
Phone is heating :/
Hey friends! My phone is HEATING very much and idk if thats the reason... But i made the same, install a 7.1.1 version and now im in dotOS rom but the same thing happens with any rom...
Does anyone feel the same?
---------- Post added at 03:06 PM ---------- Previous post was at 03:02 PM ----------
Shibin_1985 said:
U can downgrade to 6.0.1 with in twrp.. No matter u downgrade from stock 7.1.1 or from twrp 6.0.1, boot loader is gonna get downgraded when flashing via adb.. More than 150 devices are hard bricked due to download grading.. Once bricked, there is no other way to get it back to life except jtag emmc flashing (if in India) or to change Mother board which is almost half the price if new MXP.. My bro downgraded my device and I my device was dead for around 2 months.. Later on i got it emmc flashed from Pune.. There is no Blank flash files available for MXP yet.. So beware.. !!! Don't just mess up a working device, when there is not much solutions to bring it back ti life !
Click to expand...
Click to collapse
Ohhh So.. I made a super mistake? hahah But my phone is heating very much now :/ with any rom.
deguzz322 said:
Hey friends! My phone is HEATING very much and idk if thats the reason... But i made the same, install a 7.1.1 version and now im in dotOS rom but the same thing happens with any rom...
Does anyone feel the same?
---------- Post added at 03:06 PM ---------- Previous post was at 03:02 PM ----------
Ohhh So.. I made a super mistake? hahah But my phone is heating very much now :/ with any rom.
Click to expand...
Click to collapse
U'll be doing a mistake if u try to downgrade from Nougat 7.1.1 to Marshmallow 6.0.1.. And heating could be of various reasons.. Check the running of background apps, use custom kernels and see ot you can also try battery saving scripts.. It may turn of few cores and will turn it back only when it's required to be on.. So device wont get heated up and consumes less battery..
My XT1563 is no longer recognized by any PC after update to 7.1.1, also turbopower not working, tried different pcs, different cables, hard reset, nothing happens, anyone succeded to downgrade?? anyways... i won't be able to downgrade or flash, or anything if my phone is no longer recognized by any PC ! OMG !!
Germanf2 said:
My XT1563 is no longer recognized by any PC after update to 7.1.1, also turbopower not working, tried different pcs, different cables, hard reset, nothing happens, anyone succeded to downgrade?? anyways... i won't be able to downgrade or flash, or anything if my phone is no longer recognized by any PC ! OMG !!
Click to expand...
Click to collapse
Try reinstalling all the drivers of PC.. Try if its recognizing phone in bootloader mode.. It'll show if usb is connected.. If that isnt working, then youtlr micro usb port might got damaged.. I have the same case.. My mobile is getting charged.. But not getting connected in USB mode.. Out of 5 pins only 2 is required for charging and rest 3 are required for USB to work.. Any damage of any 1 pin might mess up the port.. I have to replace the port now.
Has anyone managed to do it? I can not stand my x play in 7.1, I feel it will stop so slow
leoziimdf said:
Has anyone managed to do it? I can not stand my x play in 7.1, I feel it will stop so slow
Click to expand...
Click to collapse
Don't do it via adb.. You can use 6.0.1 ROMs with in TWRP.. Else you'll end up in hard brick and there is no solution to fix it other than changing Mother Board or to get the EMMC jtag flashed.
Shibin_1985 said:
Don't do it via adb.. You can use 6.0.1 ROMs with in TWRP.. Else you'll end up in hard brick and there is no solution to fix it other than changing Mother Board or to get the EMMC jtag flashed.
Click to expand...
Click to collapse
well, thanks a lot! so it's just apply the custom 6 "directly" (twrp) from 7.1 official?
Enviado de meu Moto X Play usando Tapatalk
leoziimdf said:
well, thanks a lot! so it's just apply the custom 6 "directly" (twrp) from 7.1 official?
Enviado de meu Moto X Play usando Tapatalk
Click to expand...
Click to collapse
Flash twrp and flash roms of your choice.. Just don't downgrade using adb.. You'll regret it 200%
Hello, in my case the patient is XT1562 with stock Nougat. So far I've unlocked the bootloader and installed TWRP from here. Then, I downloaded stock XT1562 6.0.1 MPD24.107-52 Europe from here. I tried to install it through TWRP but it says 'Invalid zip file format'. After some research it seems that it's not possible to install stock by custom recovery.
To the point then - How to flash stock 6.0.1 if using adb will brick the device? By fastboot?
casioman1 said:
Hello, in my case the patient is XT1562 with stock Nougat. So far I've unlocked the bootloader and installed TWRP from here. Then, I downloaded stock XT1562 6.0.1 MPD24.107-52 Europe from here. I tried to install it through TWRP but it says 'Invalid zip file format'. After some research it seems that it's not possible to install stock by custom recovery.
To the point then - How to flash stock 6.0.1 if using adb will brick the device? By fastboot?
Click to expand...
Click to collapse
Those are stock images. You can't flash them through TWRP. You can extract it and flash the system.img but idk how to do that.
Shepxda said:
Those are stock images. You can't flash them through TWRP. You can extract it and flash the system.img but idk how to do that.
Click to expand...
Click to collapse
Flashing Stock ROM of MM by adb (downgrading) will hard brick the device for 100%.. Once bricked, there is no solution to fix it other than changing Mother Board or Jtag Flashing (only very few does it in very few countries).. You can download twrp flashable MM ROM file and flash it.. You can find Debloated stock ROM's in xda.

Latest Stock Rom For A2017U

I am currently on Lineage OS (bought that way). Wanting to go to the latest stock rooted rom. I am worried about flashing the international version on my device. Can anybody direct me to the best location to flash the stock rom through TWRP? Also, will the lineage gapps have the correct framework to get the google dialer to work? Need it so I have visual voicemail with Verizon.
Thanks in advance.
Diceroll said:
I am currently on Lineage OS (bought that way). Wanting to go to the latest stock rooted rom. I am worried about flashing the international version on my device. Can anybody direct me to the best location to flash the stock rom through TWRP? Also, will the lineage gapps have the correct framework to get the google dialer to work? Need it so I have visual voicemail with Verizon.
Thanks in advance.
Click to expand...
Click to collapse
Usually the best way to go back to stock is using MiFlash. But there aren't many A2017U packages that i know of. You can use DrakenFX's images to go back to stock via TWRP. Just look for them on the Guides or maybe the ROMs sections
Choose an username... said:
Usually the best way to go back to stock is using MiFlash. But there aren't many A2017U packages that i know of. You can use DrakenFX's images to go back to stock via TWRP. Just look for them on the Guides or maybe the ROMs sections
Click to expand...
Click to collapse
There are all stock ROMS. For all devices and latest ones;
https://forum.xda-developers.com/axon-7/how-to/guide-ztea2017v2-0-0b08-t3658636
WesTD said:
There are all stock ROMS. For all devices and latest ones;
https://forum.xda-developers.com/axon-7/how-to/guide-ztea2017v2-0-0b08-t3658636
Click to expand...
Click to collapse
You have to use MiFlash for these right?
Need something that works with TWRP
Diceroll said:
You have to use MiFlash for these right?
Need something that works with TWRP
Click to expand...
Click to collapse
Why do you? You can use MiFlash then just reinstall TWRP with axon7tool or even axon7toolkit. Using MiFlash is better than flashing a TWRP image in my opinion, because it rewrites a bunch if partitions. Plus you can't brick it using MiFlash the right way (using images for your device) while you can provoke a DFU brick with TWRP if you mess up. And you'll have to fix it with MiFlash then, but you'll have to disassemble the phone
I had a DFU-brick when trying to go back to stock using TWRP on my A2017G, so I know by experience
Choose an username... said:
Why do you? You can use MiFlash then just reinstall TWRP with axon7tool or even axon7toolkit. Using MiFlash is better than flashing a TWRP image in my opinion, because it rewrites a bunch if partitions. Plus you can't brick it using MiFlash the right way (using images for your device) while you can provoke a DFU brick with TWRP if you mess up. And you'll have to fix it with MiFlash then, but you'll have to disassemble the phone
I had a DFU-brick when trying to go back to stock using TWRP on my A2017G, so I know by experience
Click to expand...
Click to collapse
Don't have access to a computer right now
Diceroll said:
Don't have access to a computer right now
Click to expand...
Click to collapse
Alright but the problem is that maybe DrakenFX's zips are outdated. Have a G so I don't know really.
Or you could maybe try MiFavor 5.0? You should be very careful with the install procedure as it's not just download and flash, you have to flash a bootstack and a modem file plus the ROM. I recommend using a MiFavor 5.0 ROM that is NOT based on B13 - those are buggy as hell! ADM Team V3 will do.
I'm saying this because stock for the G and U hasn't got the quick settings tiles and other rather nice stuff. Everyone either loves the look or completely despises it though, so better look at the screenshots before downloading...
Now that the AKM DAC patch is out for Lineage, I'm willing to use LOS plus BeastMode Kernel instead of MiFavor 5.0. But stock is not bad, and is usually much better on some aspects than LOS and LOS-based ROMs.
I could never get Visual Voicemail to work on Stock. Installed Google Dialer as a system app and everything. Here is a bunch of info on how the service works. I hope that, eventually, someone can isolate the specific component that could be transplanted to another ROM or figure out a step-by-step to adding it to any ROM. From what I understand, it is just a matter or the correct provisioning/config.
https://source.android.com/devices/tech/config/voicemail
No VVM makes stock a no go...
Choose an username... said:
Alright but the problem is that maybe DrakenFX's zips are outdated. Have a G so I don't know really.
Or you could maybe try MiFavor 5.0? You should be very careful with the install procedure as it's not just download and flash, you have to flash a bootstack and a modem file plus the ROM. I recommend using a MiFavor 5.0 ROM that is NOT based on B13 - those are buggy as hell! ADM Team V3 will do.
I'm saying this because stock for the G and U hasn't got the quick settings tiles and other rather nice stuff. Everyone either loves the look or completely despises it though, so better look at the screenshots before downloading...
Now that the AKM DAC patch is out for Lineage, I'm willing to use LOS plus BeastMode Kernel instead of MiFavor 5.0. But stock is not bad, and is usually much better on some aspects than LOS and LOS-based ROMs.
Click to expand...
Click to collapse
Do you have a link to the DAC patch
Diceroll said:
Do you have a link to the DAC patch
Click to expand...
Click to collapse
Lol it's in the Guides section, called AK4470 fix or something similar
@QuantumFluxx,
Hi, can you describe your phone's problem clearly, I guess I have the same problem with you. Have you fixed your problem?
@Diceroll,,
Hi, have you fixed the issue in your phone?
Can you describe the issue more clear? I guess I have the same problem with you.

RR tissot

Anyone tested it ?
https://androidfilehost.com/?fid=890129502657580033
Stop post same post twice!
Sent from my Mi A1 using XDA Labs
May a mod delete one
coremania said:
Anyone tested it ?
https://androidfilehost.com/?fid=890129502657580033
Click to expand...
Click to collapse
What about testing yourself?
all custom rom for tissot cant be installed , maybe our twrp is not compitable for flash all the rom yet
ShazlieyAzizan said:
all custom rom for tissot cant be installed , maybe our twrp is not compitable for flash all the rom yet
Click to expand...
Click to collapse
They CAN. For those of you who still don't understand, here's the process:
1. You need to get back to Nougat
2. Use the recovery from @deadman96385
3. Wipe ALL Data
4. Flash the ROM
5. Reboot
- it may say "No OS installed" but just ignore that message and restart anyway
If you want to roll back to stock, you need to flash the stock ROM via fastboot. I don't really like using Mi Flash Tool, so I do it manually (because Mi Flash Tool locks the bootloader).

Moto g4 Plus root issue

First i unlocked the bootloader
Second i flashed twrp.
Thirdly i flashed ElementalX-G4-2.01 and thn supersu
Now the phone is not booting atall only black screen is there any resolution or did i make any wrong flash please let me know but still i can access twrp.
Btw My phone is running on Android 7.0 and twrp 3.2.1.0
I tried google and all still no resolution.
Now i tried custom roms as well still same not booting up atall.
Akshaykoppula said:
First i unlocked the bootloader
Second i flashed twrp.
Thirdly i flashed ElementalX-G4-2.01 and thn supersu
Now the phone is not booting atall only black screen is there any resolution or did i make any wrong flash please let me know but still i can access twrp.
Btw My phone is running on Android 7.0 and twrp 3.2.1.0
I tried google and all still no resolution.
Now i tried custom roms as well still same not booting up atall.
Click to expand...
Click to collapse
Have you tried to wipe caches too? I guess your referring to https://forum.xda-developers.com/mo...g4-plus-supersu-android-t3587918/post71817560 right?
strongst said:
Have you tried to wipe caches too? I guess your referring to https://forum.xda-developers.com/mo...g4-plus-supersu-android-t3587918/post71817560 right?
Click to expand...
Click to collapse
i have tried now it seems working thanks. But custom rom having too many issues with diffrent kernel
can u suggest the official moto or any stable rom with kernel.
Akshaykoppula said:
i have tried now it seems working thanks. But custom rom having too many issues with diffrent kernel
can u suggest the official moto or any stable rom with kernel.
Click to expand...
Click to collapse
Official ressurection remix is very good, or stock rom.

ROM Official Miui 10 Global Stable For Redmi 4X

Download Here 10.1.1.0
http://bigota.d.miui.com/V10.1.1.0.NAMMIFI/miui_HM4XGlobal_V10.1.1.0.NAMMIFI_31186e0176_7.1.zip
Can I flash it using twrp. I am on arrow os 9.0 right now
manojzzz said:
Can I flash it using twrp. I am on arrow os 9.0 right now
Click to expand...
Click to collapse
Yes you can. The recovery will be replaced by stock recovery, so you'll need to reflash your recovery again
Tried
I tried it flash by TWRP and stuck on the Mi boot logo. Tried twice.
Can i flash on miui 9? device not root and i didnt flash custom twrp
alfaqih16 said:
Can i flash on miui 9? device not root and i didnt flash custom twrp
Click to expand...
Click to collapse
Yes, you can
Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0
lochNESSIE said:
Yes you can. The recovery will be replaced by stock recovery, so you'll need to reflash your recovery again
Click to expand...
Click to collapse
Flash lazy flasher after rom, and dude recovery replaces when u flash fastboot rom, not recovery
Installed it. Nice UI, smooth but still, it's loaded with stuff that I don't use.
Tried to uninstall crapware and the google apps that I don't need with system apk remover ( root ). It didn't let me, so I gave up on MIUI, again. There is a lot of useless stuff in there.
Isn't there a clean MIUI OS without heavy google apps preinstalled ?
MIUI, either you love it or you hate it ...
aman.dwivedi said:
Flash lazy flasher after rom, and dude recovery replaces when u flash fastboot rom, not recovery
Click to expand...
Click to collapse
I said that in case he doesn't have lazy flasher with him. And yes, TWRP recovery does get replaced with recovery ROM. Happened everytime I reflashed miui to fix issues. Haven't tried it with other recoveries as of yet.
saintjimmy1984 said:
Installed it. Nice UI, smooth but still, it's loaded with stuff that I don't use.
Tried to uninstall crapware and the google apps that I don't need with system apk remover ( root ). It didn't let me, so I gave up on MIUI, again. There is a lot of useless stuff in there.
Isn't there a clean MIUI OS without heavy google apps preinstalled ?
MIUI, either you love it or you hate it ...
Click to expand...
Click to collapse
Miui EU is the lightest "oficial" Miui you gonna find
manojzzz said:
Can I flash it using twrp. I am on arrow os 9.0 right now
Click to expand...
Click to collapse
did it work? I'm in LineageOS and i want to flash stable miui
eusobao said:
did it work? I'm in LineageOS and i want to flash stable miui
Click to expand...
Click to collapse
Yes it work
Hi, thanks ! Good and stable ROM.
Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0
naseer222 said:
Can i flash it using the updater app nd if i will loose data by this procedure.. I m on stable 9.6.5.0
Click to expand...
Click to collapse
Tried to flash it using updater app and I was successful flashing it.
Only recovery install?
Hi! Can i install this through settings/system update/choose upgrade from inner sd card, or i can install only through twrp recovery?
So disappointed
Even after stable release... This thing doesn't support camera 2 API.. and I'm not talking about official support... Even if you add in the lines to enable the API... It won't work after 8.9.20 and above ... Now the stable version doesn't let us use gcam too..?
Which TWRP can I use to flash?
Try latest OrangeFox, and TWRP 3.0.3, just stuck in the end of update process (can not finished).
Stock recovery has no "update" option.
Updater didn't work.
Pls advice.
weird - it's a global version and only chinese region to set in settings.
and i can't set 5x5 icons set on desktop (only 4x5), so... i'm going back to miui eu version.
---------- Post added at 08:18 PM ---------- Previous post was at 07:35 PM ----------
Oery said:
Which TWRP can I use to flash?
Try latest OrangeFox, and TWRP 3.0.3, just stuck in the end of update process (can not finished).
Stock recovery has no "update" option.
Updater didn't work.
Pls advice.
Click to expand...
Click to collapse
i've used official twrp 3.2.3-1 from https://dl.twrp.me/santoni/ and it boots (clean flash from internal storage, not from sd card).

Categories

Resources