Hi i dropped my phone and the screen is black. I know it still works because the fingerprint still vibrates and the pc still recognizes it via charging method. I have some important photos that i didn't have backed up and now wish to recover. Can somebody show me steps to get into mass storage ?
jronish said:
Hi i dropped my phone and the screen is black. I know it still works because the fingerprint still vibrates and the pc still recognizes it via charging method. I have some important photos that i didn't have backed up and now wish to recover. Can somebody show me steps to get into mass storage ?
Click to expand...
Click to collapse
Did you have USB Debugging enabled in the developer's menu before the screen went black?
Very sadly no I did not. Can I enable it via abd?
jhs39 said:
Did you have USB Debugging enabled in the developer's menu before the screen went black?
Click to expand...
Click to collapse
Very sadly no.... Can I enable it via adb?
jronish said:
Very sadly no.... Can I enable it via adb?
Click to expand...
Click to collapse
Not that I know of. You might want to try Huawei's computer program HiSuite and see if it can connect to your phone without you changing any options on your dead phone screen.
http://consumer.huawei.com/minisite/HiSuite_en/index.html
jhs39 said:
Not that I know of. You might want to try Huawei's computer program HiSuite and see if it can connect to your phone without you changing any options on your dead phone screen.
http://consumer.huawei.com/minisite/HiSuite_en/index.html
Click to expand...
Click to collapse
Thanks I'll try that. Can you pull data from adb?
jronish said:
Thanks I'll try that. Can you pull data from adb?
Click to expand...
Click to collapse
In general, you can. You'd need to have ADB enabled though. You'd use the ADB pull command.
If anything, are you on stock with stock display size? Do you have apps that keep a persistent notification?
If not, I'd say you could try this;
Basically get someone to match your setup. They'd install any apps that you use which use persistent notifications to exactly match your setup. If none, have them take a picture (with an actual camera or another phone) of their 6P with the notification shade pulled down while plugged into a computer. Then another picture after they click "Charging Only" to switch it to MTP. If you can unlock the phone with the fingerprint scanner, and start up top to pull down your shade, you should be able to follow visual queues to enable MTP instead of charge only mode. Then you could at least navigate the folders on the phone and drag and drop your pictures to PC.
Edit: Assuming your screen still responds to touch, but is just black. Didn't see it specified. It's worth a shot.
jronish said:
Hi i dropped my phone and the screen is black. I know it still works because the fingerprint still vibrates and the pc still recognizes it via charging method. I have some important photos that i didn't have backed up and now wish to recover. Can somebody show me steps to get into mass storage ?
Click to expand...
Click to collapse
Hello... Maybe try this app: https://forum.xda-developers.com/showthread.php?t=2786395
Good luck..!
5.1 said:
Hello... Maybe try this app: https://forum.xda-developers.com/showthread.php?t=2786395
Good luck..!
Click to expand...
Click to collapse
Thanks....I will give that a try and report back!
5.1 said:
Hello... Maybe try this app: https://forum.xda-developers.com/showthread.php?t=2786395
Good luck..!
Click to expand...
Click to collapse
RoyJ said:
In general, you can. You'd need to have ADB enabled though. You'd use the ADB pull command.
If anything, are you on stock with stock display size? Do you have apps that keep a persistent notification?
If not, I'd say you could try this;
Basically get someone to match your setup. They'd install any apps that you use which use persistent notifications to exactly match your setup. If none, have them take a picture (with an actual camera or another phone) of their 6P with the notification shade pulled down while plugged into a computer. Then another picture after they click "Charging Only" to switch it to MTP. If you can unlock the phone with the fingerprint scanner, and start up top to pull down your shade, you should be able to follow visual queues to enable MTP instead of charge only mode. Then you could at least navigate the folders on the phone and drag and drop your pictures to PC.
Edit: Assuming your screen still responds to touch, but is just black. Didn't see it specified. It's worth a shot.
Click to expand...
Click to collapse
I am on stock and all that with no persistent notification and have tried to match it exactly with my brothers phone (same) but i don't think touch functions are working....it should be an easy change to switch off of Charging but touch must be down.......!
RoyJ said:
In general, you can. You'd need to have ADB enabled though. You'd use the ADB pull command.
If anything, are you on stock with stock display size? Do you have apps that keep a persistent notification?
If not, I'd say you could try this;
Basically get someone to match your setup. They'd install any apps that you use which use persistent notifications to exactly match your setup. If none, have them take a picture (with an actual camera or another phone) of their 6P with the notification shade pulled down while plugged into a computer. Then another picture after they click "Charging Only" to switch it to MTP. If you can unlock the phone with the fingerprint scanner, and start up top to pull down your shade, you should be able to follow visual queues to enable MTP instead of charge only mode. Then you could at least navigate the folders on the phone and drag and drop your pictures to PC.
Edit: Assuming your screen still responds to touch, but is just black. Didn't see it specified. It's worth a shot.
Click to expand...
Click to collapse
My device doesn't have USB debugging enabled but I can access it via fastboot! What are the chances of pulling images via fastboot?
jronish said:
My device doesn't have USB debugging enabled but I can access it via fastboot! What are the chances of pulling images via fastboot?
Click to expand...
Click to collapse
None, AFAIK.
God you people....if you have TWRP installed as recovery.....do this until it works right...timing is everything...hold the power button down(I know you won't know if/when it powers off) and hold down the volume up and power button when you think it powers up....volume up and power enters recovery directly, not bootloader....then you can connect to computer and transfer as twrp has adb enabled by default
jamescable said:
God you people....if you have TWRP installed as recovery.....do this until it works right...timing is everything...hold the power button down(I know you won't know if/when it powers off) and hold down the volume up and power button when you think it powers up....volume up and power enters recovery directly, not bootloader....then you can connect to computer and transfer as twrp has adb enabled by default
Click to expand...
Click to collapse
No need to be so condescending. Especially since you offered OP a useless tip.
Why? As stated in their 1st post, their fingerprint scanner unlocks the phone. You can't have a fingerprint set without a pin, password or pattern. Since TWRP does not support fingerprint unlock, they would have to manually input their password for TWRP to access their data and have it show on a PC. As mentioned by OP above, the touch screen is non responsive. Meaning they cannot input their credentials to decrypt.
Edit: Just to confirm, I went to recovery and tried myself. Folders will not show up in file explorer on PC until TWRP is unlocked. ADB devices does show device ID as in recovery, but issuing ADB pull commands does not work. I pulled several folders and all I got was empty folders with no files. If they're encrypted (they said stock, so I'm just going to go ahead and assume they are encrypted) with password/pin/pattern (which we've already established is the case) this will not work.
@OP, I'm not sure of a way you'd be able to get into your pictures at present. Maybe someone with more technical knowledge could chime in, but as far as I can see you need to replace your screen. Either send it in to a repair shop, or DIY.
Here's a link for a new 6P screen (this is just the first link I found). Shop around yourself, see if you can find better prices & also be wary of reviews:
https://www.fixez.com/store/more-brands/huawei/huawei-google-nexus-6p
Here's a few how-to links:
https://www.etradesupply.com/blog/how-to-replace-a-cracked-nexus-6p-screen/
https://www.youtube.com/watch?v=D3j79xygFoQ
so i have used a usb-c hub with an hdmi port and usb port - then hook up phone to a monitor (not computer) and i had a pattern lock - it was really annoying as i had to guess where the dots were as the monitor doesnt show you where the dots are - but i used my mouse to unlock it - if you have a number lock it is easier to unlock - as you just makesure numlock is on then type in your passcode - once there you should be able to navigate round your phone using a mouse - turn on debugging and make sure you have the usb connection set to MTP (media transfer protocol) instead of charge only - id also take off all locking mechanisms to make it easier for yourself - then plug it in your pc and transfer all files across
Related
I really need a guru here with this one! Dropped the phone last tuesday, screen cracked, and is no longer operable. Since the Nexus 4 has no SD card, I have no way of retrieving the data on it. When I plug the usb cable into the computer, it defaults to charging mode instead of mass storage mode to mount a drive on the computer. Screen is locked with my chosen pattern. Is there any way at all to make the the phone automatically mount the drive instead of going to charging mode?
dax702 said:
I really need a guru here with this one! Dropped the phone last tuesday, screen cracked, and is no longer operable. Since the Nexus 4 has no SD card, I have no way of retrieving the data on it. When I plug the usb cable into the computer, it defaults to charging mode instead of mass storage mode to mount a drive on the computer. Screen is locked with my chosen pattern. Is there any way at all to make the the phone automatically mount the drive instead of going to charging mode?
Click to expand...
Click to collapse
Is your bootloader unlocked? Do you have USB debugging enabled?
I don't know the answer to either of those questions unfortunately. How would I know if debugging is enabled, or the bootloader is unlocked?
dax702 said:
I don't know the answer to either of those questions unfortunately. How would I know if debugging is enabled, or the bootloader is unlocked?
Click to expand...
Click to collapse
If you had done either of those things you probably would have known, but in case you forgot... Did you ever root your phone? If you did you would have had to unlock your bootloader. If you did not, did you ever boot into bootloader mode, connect your phone to your computer and used the command prompt to run the command "fastboot oem unlock"?
If you never did any of that I unfortunately don't think there is much to do about your phone.
I'm pretty sure I didn't do any of that.. Does it have to do anything with when you hold the volume down button and power button at the same time and it brings you to that android screen where you use the volume buttons as cursors up and down, and the power button to select items? I can get to that screen.....
I found this thread:
http://www.dotkam.com/2013/01/16/backup-and-reset-nexus-4-cracked-and-locked-screen/
but I'm not sure if it helps me or not......? That screen I was talking about is called fastboot
this is crazy, I just came across this thread, looks like it might be the answer to my problem, I hope!! I will update this thread after I give it a try:
http://forum.xda-developers.com/nexus-4/help/fastboot-recovery-remotely-enable-usb-t2177440
Hello guys,
I have broken the screen of my Nexus 6P and I really want to save my data before moving to a new phone.
I've found several applications to control phone from PC, but all of them needs USB debugging mode enabled, which is unfortunately disabled on my phone.
I read here on the forum some method to enable USB debugging from PC via USB cable, but I'm not an expert and I can't do it.
My phone is locked by screen lock (PIN code, of course I know the code), and the phone is NOT rooted, OS is the original one (with all the updates installed.)
If any of you guys would be able turn on USB debugging on my phone without losing my data, I will be glad to reward his efforts by $125 and a HUGE "Thank you"! Money will be sent via PayPal, remote session could be done via TeamViewer.
I really hope someone of you can do it!
Thank you in advance!
How is the screen broken?
Is it just not responding to touch? Is the lcd shattered or dead black?
---------- Post added at 12:49 AM ---------- Previous post was at 12:46 AM ----------
If you can see even a little of the screen, grab a usb-c OTG cable ( https://goo.gl/BzUKno ) and use a wired pc mouse to make all entries needed.
InkSlinger420 said:
Is it just not responding to touch? Is the lcd shattered or dead black?
---------- Post added at 12:49 AM ---------- Previous post was at 12:46 AM ----------
If you can see even a little of the screen, grab a usb-c OTG cable ( https://goo.gl/BzUKno ) and use a wired pc mouse to make all entries needed.
Click to expand...
Click to collapse
Unfortunately it is dead black, and not responding to touch.
sawwee said:
Unfortunately it is dead black, and not responding to touch.
Click to expand...
Click to collapse
i have good news for you as other have said you need an otg cable i tested with this one https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and it worked with this mouse and keyboard combo https://www.amazon.com/gp/product/B005DKZTMG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 im sure other will work but thats what i tested with once it is connected swiping up is a bit hard i was just trying to drag it all the way up at first but to get to the pin screen you will need to do it in a flicking up motion then just you the the number keys on the keyboard and unlock then the next best this is probably to try and cast the screen so your not blind if you cant and you get it unlocked these are the steps ...
1. unlock clicking and swiping mouse up then enter pin and hit enter.
2. down twice on keyboard and then enter to get to app drawer
3. type settings hit enter twice
4. down 11 times enter.
5. down 3 times enter.
6. down 13 times enter right once and enter.
usb debugging should be enabled that is for android 8.0
ps if you dont have developer mode enabled it will be different if so tell me ill count it out for you for that too.
For $125.....
For damn near the cost of the reward, you could get another screen/assembly and swap the guts, having a fully working device again....
billycar11 said:
i have good news for you as other have said you need an otg cable i tested with this one https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and it worked with this mouse and keyboard combo https://www.amazon.com/gp/product/B005DKZTMG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 im sure other will work but thats what i tested with once it is connected swiping up is a bit hard i was just trying to drag it all the way up at first but to get to the pin screen you will need to do it in a flicking up motion then just you the the number keys on the keyboard and unlock then the next best this is probably to try and cast the screen so your not blind if you cant and you get it unlocked these are the steps ...
1. unlock clicking and swiping mouse up then enter pin and hit enter.
2. down twice on keyboard and then enter to get to app drawer
3. type settings hit enter twice
4. down 11 times enter.
5. down 3 times enter.
6. down 13 times enter right once and enter.
usb debugging should be enabled that is for android 8.0
ps if you dont have developer mode enabled it will be different if so tell me ill count it out for you for that too.
Click to expand...
Click to collapse
Thanks a lot, I'll order it from Amazon and try it. If it works I'll send you the reward, thank you very much again! (P.S. Developer mode is enabled. However I'm not sure if I have Android 7 or 8.0 on my device. Is it different on 7?)
InkSlinger420 said:
For damn near the cost of the reward, you could get another screen/assembly and swap the guts, having a fully working device again....
Click to expand...
Click to collapse
Thank you!
Yes, I saw that for this price I can order another screen, but it takes for a while to receive it and I need some of my data pretty urgently, that's why I prefer a quick solution.
sawwee said:
Thank you!
Yes, I saw that for this price I can order another screen, but it takes for a while to receive it and I need some of my data pretty urgently, that's why I prefer a quick solution.
Click to expand...
Click to collapse
If OEM unlocking is on / bootloader is unlocked, you can try flashing twrp recovery(after unlocking bootloader) and check if files show up on pc (I think MTP mode is on by default in twrp).
Perhaps trying this.
sawwee said:
Hello guys,
I have broken the screen of my Nexus 6P and I really want to save my data before moving to a new phone.
I've found several applications to control phone from PC, but all of them needs USB debugging mode enabled, which is unfortunately disabled on my phone.
I read here on the forum some method to enable USB debugging from PC via USB cable, but I'm not an expert and I can't do it.
My phone is locked by screen lock (PIN code, of course I know the code), and the phone is NOT rooted, OS is the original one (with all the updates installed.)
If any of you guys would be able turn on USB debugging on my phone without losing my data, I will be glad to reward his efforts by $125 and a HUGE "Thank you"! Money will be sent via PayPal, remote session could be done via TeamViewer.
I really hope someone of you can do it!
Thank you in advance!
Click to expand...
Click to collapse
Perhaps you could try this app herehttps://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 and it's self explanatory. There's a setting for you to retrieve files from your phone, as long as you remember the path to those files. Good luck!
without usb debugging.
try adb push/pull or sideload recovery, i think no need for usb debugging to be enabled here.
sawwee said:
Thanks a lot, I'll order it from Amazon and try it. If it works I'll send you the reward, thank you very much again! (P.S. Developer mode is enabled. However I'm not sure if I have Android 7 or 8.0 on my device. Is it different on 7?)
Click to expand...
Click to collapse
It would be different for 7 because in 8 they redid the settings
NoobInToto said:
If OEM unlocking is on / bootloader is unlocked, you can try flashing twrp recovery(after unlocking bootloader) and check if files show up on pc (I think MTP mode is on by default in twrp).
Click to expand...
Click to collapse
Thank you for your suggestion!
I'm afraid I'm not able to do what you described (I'm not an expert at all), that's why I need someone who will help me. Moreover I need not only the files but it would be optimal to get full access to the phone, first of all because I need to use google authenticator. That's why I need usb debugging mode to be turned on so badly.
BenAmirul said:
Perhaps you could try this app herehttps://forum.xda-developers.com/nexus-6/development/toolkit-wugs-nexus-root-toolkit-v1-9-8-t2947452 and it's self explanatory. There's a setting for you to retrieve files from your phone, as long as you remember the path to those files. Good luck!
Click to expand...
Click to collapse
Thank you for your suggestion!
If possible, I prefer to be able to turn on usb debugging mode because then I can get full control on my phone and control it from my laptop, not only getting able to save my files. I need it mostly because I need to use Google Authenticator on my phone.
braheem12 said:
try adb push/pull or sideload recovery, i think no need for usb debugging to be enabled here.
Click to expand...
Click to collapse
Thank you for your suggestion, too! Unfortunately I don't really know what do the things you mentioned mean. (I'm sorry, I'm a simple user without any special knowledge about android, so I don't know what is adb or a sideload recovery. That's why I offered a reward for some remote help.) Could you please explain it slightly more detailed?
billycar11 said:
It would be different for 7 because in 8 they redid the settings
Click to expand...
Click to collapse
Thanks! Is there a way to get to know the android version of my phone (in case of black screen)? And... could you (or someone else) please tell me the proper order of key hits for Android 7, too?
Thanks a lot again!
sawwee said:
Thanks! Is there a way to get to know the android version of my phone (in case of black screen)? And... could you (or someone else) please tell me the proper order of key hits for Android 7, too?
Thanks a lot again!
Click to expand...
Click to collapse
Yeah I will he able to test on my Nexus 6 if those keys don't work for you
billycar11 said:
Yeah I will he able to test on my Nexus 6 if those keys don't work for you
Click to expand...
Click to collapse
Thanks a lot, I really appreciate! I'll let you know once I received the OTG cable I've ordered.
Please see this thread here on Xda. It has the commands to enable usb debugging and also control a phone with broken screen. I seen your thread and thought this could help. Good luck & God bless.
[Tool][Windows] Control a device with a broken screen. Now with touchscreen support!!
https://forum.xda-developers.com/showthread.php?t=2786395
billycar11 said:
i have good news for you as other have said you need an otg cable i tested with this one https://www.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and it worked with this mouse and keyboard combo https://www.amazon.com/gp/product/B005DKZTMG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 im sure other will work but thats what i tested with once it is connected swiping up is a bit hard i was just trying to drag it all the way up at first but to get to the pin screen you will need to do it in a flicking up motion then just you the the number keys on the keyboard and unlock then the next best this is probably to try and cast the screen so your not blind if you cant and you get it unlocked these are the steps ...
1. unlock clicking and swiping mouse up then enter pin and hit enter.
2. down twice on keyboard and then enter to get to app drawer
3. type settings hit enter twice
4. down 11 times enter.
5. down 3 times enter.
6. down 13 times enter right once and enter.
usb debugging should be enabled that is for android 8.0
ps if you dont have developer mode enabled it will be different if so tell me ill count it out for you for that too.
Click to expand...
Click to collapse
I've tried to do it as you described.
1. I successfully unlocked the screen by typing my pin code, I can even hear the audio confirmation (ie. unlock sound). Fortunately I have to do it only once because after the first successfully unlock I can use the fingerprint reader to unlock the screen
2. Once the screen is unlocked, I hit twice the "down" button on the attached keyboard. I think something is going wrong here, because after the first "down" I can hear the audio confirmation (ie. keyboard sound), and after the second one I can't hear anything as if I stepped down on a list which has ended already. Any idea what do I do wrong?
Samuel Holland said:
Please see this thread here on Xda. It has the commands to enable usb debugging and also control a phone with broken screen. I seen your thread and thought this could help. Good luck & God bless.
[Tool][Windows] Control a device with a broken screen. Now with touchscreen support!!
https://forum.xda-developers.com/showthread.php?t=2786395
Click to expand...
Click to collapse
Thanks a lot for your suggestion!
The thread you linked says I should enable usb debugging via recovery using this code:
Code:
Adb shell
echo "persist.service.adb.enable=1" >>/system/build.prop
echo "persist.service.debuggable=1" >>/system/build.prop
echo "persist.sys.usb.config=mass_storage,adb" >>/system/build.prop"
reboot
Unfortunately I have no idea how to do that.
My $125 reward is still available for anyone who could help me with that via TeamViewer (or any other way.)
Refer to this thread: https://forum.xda-developers.com/showthread.php?p=75551897
So Im waiting on a replacement screen (it started as crazy graphics all over screen, not completely blank, but responds to input), and its taking forever. I knew I had ADB debug enabled, so wondered if I can control the phone via PC.
Behold there are few ways this can be done.
Long story short......in adb, my phones shows as ADB DEVICES : UNAUTHROIZED
Is there anyway I can authorize the adb request between computer/phone?
Its a stock OnePlus 5.....so no custom recovery and not rooted :-/
You could guestimate the area or the enter button of the dialog, and use a mouse connected via USB otg to click it
matrx10503 said:
Refer to this thread: https://forum.xda-developers.com/showthread.php?p=75551897
So Im waiting on a replacement screen (it started as crazy graphics all over screen, not completely blank, but responds to input), and its taking forever. I knew I had ADB debug enabled, so wondered if I can control the phone via PC.
Behold there are few ways this can be done.
Long story short......in adb, my phones shows as ADB DEVICES : UNAUTHROIZED
Is there anyway I can authorize the adb request between computer/phone?
Its a stock OnePlus 5.....so no custom recovery and not rooted :-/
Click to expand...
Click to collapse
Best way would be to use a displaylink adapter do you can see the screen.
If you can make it through the menus you'd need to install the app which can be done from a PC, just push it to the device, then advanced, then turn on usb, then allow the app. Then the screen will be shown on a monitor.
Either that or change the screen.
I got it working......I had to boot up an old laptop hard drive I had that was Auth'd. It let me do what I needed.
Hi,
My phone fell down from hand and display is gone. I checked with motorola service center, they have told that display IC is gone.
My phone is working fine without display, If I call then I am able to hear the ringtone and finger print scanner also working fine. my phone USB debugging is turned off.
I have very important information in the mobile. I need that data.
Kindly let me know to get the data from mobile.
Gemz842 said:
Hi,
My phone fell down from hand and display is gone. I checked with motorola service center, they have told that display IC is gone.
My phone is working fine without display, If I call then I am able to hear the ringtone and finger print scanner also working fine. my phone USB debugging is turned off.
I have very important information in the mobile. I need that data.
Kindly let me know to get the data from mobile.
Click to expand...
Click to collapse
Is bootloader unlocked or locked and TWRP installed ?
The only way i know is somehove turn USB mode from 'Charge only' to 'file transfer'
I don't know if Google app / assistant / "ok google" can change it ?
Other way is your luck, if Touch is working, you can ask someone with same device to see where notification and other menu appeare, and go tap and see your luck.. (or ask someone here on xda to provide usefull screenshots of menu.)
____Mdd said:
Is bootloader unlocked or locked and TWRP installed ?
The only way i know is somehove turn USB mode from 'Charge only' to 'file transfer'
I don't know if Google app / assistant / "ok google" can change it ?
Other way is your luck, if Touch is working, you can ask someone with same device to see where notification and other menu appeare, and go tap and see your luck.. (or ask someone here on xda to provide usefull screenshots of menu.)
Click to expand...
Click to collapse
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Gemz842 said:
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Click to expand...
Click to collapse
Then there's no way, sadly, but without touch you can't navigate to mtp as mentioned before and you also can't turn on own debugging. But unlocking bootloader wipes your phone, so this isn't a good idea
Gemz842 said:
I did not change any settings in mobile, so bootloader is locked.. and TWRP is not installed..
I have disabled the USB debugging few days before my phone got broken (Unfortunate).
Touch is not working because of Display IC short.
Is there a way to enable USB debugging using Clockworkmod recovery or some other procedure to enable MTP file transfer.
Any suggestion to do it using OTG Mouse/Keyboard?
Click to expand...
Click to collapse
As strongst said there is no safe way..
You can ask service center guys if they can change particular circuit/ic and make it work or not... If they say to change motherboard, then refuse to change, otherwise you will lost everything..
As you said to do with mouse/keyboard,
You need same device with same configuration, so you can measure exact distance of mouse to do necessary settings, but it will be completely blind, you will be not sure what you are clicking at.. same with keyboard...
(Also thing to note, if you have screen lock, first difficulty is to unlock it.)
TEST YOUR LUCK...
After it, there is no other way..
____Mdd said:
As strongst said there is no safe way..
You can ask service center guys if they can change particular circuit/ic and make it work or not... If they say to change motherboard, then refuse to change, otherwise you will lost everything..
As you said to do with mouse/keyboard,
You need same device with same configuration, so you can measure exact distance of mouse to do necessary settings, but it will be completely blind, you will be not sure what you are clicking at.. same with keyboard...
(Also thing to note, if you have screen lock, first difficulty is to unlock it.)
TEST YOUR LUCK...
After it, there is no other way..
Click to expand...
Click to collapse
I tried replacing IC and display but that does not work. OTG mouse is very difficult, can any one provide the key combinations to enable USB Debugging or switch on WIFI?
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
cartonneexpress said:
Hehy there,
unfortunately the screen on my mi9t stopped displaying. Really weird. While I was using it, the screen started flashing, just to turn black and never wake up again. No fall or water involved. The phone still seems to work fine, and even touch seems to work, but no display.
I opened up the phone to see if the connector got loose, but everything is well in place.
Now my problem ist, that I can not access the phone anymore. All my files and things are still on there but unreachable.
Here are the facts:
- no display
- bootloader is locked
- usb debugging is enabled, but my pc is not authorized
- I can blindly get into fastboot and to the lockscreen
- I am not able to blindly unlock the device
Easiest option would obvoulsy be to exchange the display, but unfortunately I can not get on here (South Africa) and shipping would take a month.
My favourite aproach so far was to mirror the screen via Vizor, but unfortunately it needs to install the according app on the device, which it can not while the device is locked.
Does someone here know how to recover the data?
Thanks
and a happy new year to everyone!
Click to expand...
Click to collapse
When I experimented, I was able to unlock my two SIM cards and Android by adb (replace xxxx by your PINs)
However, phone was rooted and shell was given the root grant:
adb wait-for-device devices
adb shell
su
input text xxxx
input keyevent 66
input text xxxx
input keyevent 66
input touchscreen swipe 930 880 930 380
input text xxxx
exit
exit
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
zgfg said:
...
Click to expand...
Click to collapse
Thank your for the idea! Unfortunately it does not work in the unrooted phone. I suspect that's only because I can't the adb connection to my pv authorized.
I tried this on an unrooted lineage os 17, which I have on my old Mix2, and there it works like a charm.
yaro666 said:
try fastboot apk
Mirror screen to pc with vyzor. You have usb debugging turned on, so it's worth a try.
If touch doesn't work, use usb otg adapter to plug keyboard or mouse
There's no other option.
Click to expand...
Click to collapse
Thanks for the advice. I think i tried everything to get the apk installed, but I can not do anything through adb since even though debugging is activated, the connection to my pc is not authorized.
I guess I have to wait for the replacement screen.
cartonneexpress said:
I guess I have to wait for the replacement screen.
Click to expand...
Click to collapse
Any water exposure? Ever?
May not be the screen; a mobo failure is just as likely even more so especially if they use no lead solder paste.
Maybe a loose or bad connector/cable if you get real lucky... and find it.