So I just updated Magisk from v11 to v12 and my phone is totally douched up. After rebooting there's an "Unable to use fingerprints" message at the bottom of the screen, the touch screen is janky and my unlock pattern no longer works. The screen goes to sleep randomly too and then comes on without being touched. On the off occasson that the unlock pattern DOES work, the screen loads with no icons, just the page dots and status bar with my wallpaper and nav buttons. Uninstalled Magisk and got the same. Rebooted after uninstall, same thing. I guess I'll be reflashing the ROM, but this is a huge pain in the ass.
Same happened to me on ls997 but i dirty flashed my rom. It fixed the issue without losing anything. Not sure witch carrier you have or witch rom.
Well VS995 and H918 seem safe to update magisk on. Ive seen multiple people have 0 issues with it. Maybe a bad download? Never had that happen while updating magisk :|
Sounds more like a system issue. Id try reflashing your rom and see if that works
Related
I'm having a strange issue with carbon ROM, thought I would try here since no one else has been able to help. After a clean wipe of the phone and fresh install of any nightly, and not signing in to google at start up, I am getting bootloops when I turn off the lockscreen and adjust the navbar height. Only these two things cause the bootloops. If I turn the lockscreen on or put the navbar to default height I can boot fine. I have tested this with nothing loaded onto the phone and it still happens. If anyone has any ideas on how to fix it would be helpful. Thanks.
So I just updated Magisk from v11 to v12 and my phone is totally douched up. After rebooting there's an "Unable to use fingerprints" message at the bottom of the screen, the touch screen is janky and my unlock pattern no longer works. The screen goes to sleep randomly too and then comes on without being touched. On the off occasson that the unlock pattern DOES work, the screen loads with no icons, just the page dots and status bar with my wallpaper and nav buttons. Uninstalled Magisk and got the same. Rebooted after uninstall, same thing. I guess I'll be reflashing the ROM, but this is a huge pain in the ass. :/
This isn't a question--more of an answer. DO NOT UPDATE to v12. If you did and have trouble, downgrade to 11.x.
I can second this. Updated to 12.0 and my phone started rebooting randomly and fingerprints started not working. Thought it was something with the rom so clean flashed it again, all was fine till I updated Magisk again. Downgraded to 11.6 and so far no more reboots and fingerprint works.
that's odd. it is working great for me. (currently using Weta 4.9.2 and Tilde's latest kernel + latest magisk manager and magisk 12.0 zip flashed)
Def breaks the systemui and causes the device to repeatedly crash on the ls997.
Was how it acted on pre 11.0 builds for us on v20.
Im testing with the dev on magisk now.
Updated to the latest, no issues here on RR with original kernel.
xxxrichievxxx said:
Updated to the latest, no issues here on RR with original kernel.
Click to expand...
Click to collapse
yeah aosp versus stock lg os act differently
i believe last time ls997 was the only one really having issues, but its breaking ui on the ls997
don't do it
I updated also, put phone in a never-ending 30 seconds to reboot. Had to restore.
hi there,
I got a new AGM phone model A1Q some weeks ago, and I am manage to install LOS (unofficial) found on a China website, because the phone go wrong after trying to install Gapps, making none apps work.
After several trials, LOS install to the phone with working Gapps, however I got 2 issues right now.
1. the screen never come back after screen is off, I have to reboot the phone to get it back.
2. notification bar is not updating, I am using Nova Launcher right now, I tried disabled the notification bar and reboot, nothing happen.
For the moment, I am not able to get back TWRP recovery after installing LOS, I have to figure out other way to redo the LOS installation.
Please someone throw me some suggestions.
Sorry for my bad English.
algebrathebard said:
hi there,
I got a new AGM phone model A1Q some weeks ago, and I am manage to install LOS (unofficial) found on a China website, because the phone go wrong after trying to install Gapps, making none apps work.
After several trials, LOS install to the phone with working Gapps, however I got 2 issues right now.
1. the screen never come back after screen is off, I have to reboot the phone to get it back.
2. notification bar is not updating, I am using Nova Launcher right now, I tried disabled the notification bar and reboot, nothing happen.
For the moment, I am not able to get back TWRP recovery after installing LOS, I have to figure out other way to redo the LOS installation.
Please someone throw me some suggestions.
Sorry for my bad English.
Click to expand...
Click to collapse
Update:
Notification bar issue fixed after several reboot, but screen issue still exist.
Device Lenovo k6 power k33a42 running stock 7.0 last stock build.
Issue
Device would work fine as long as I am on lockscreen, I can put password type every thing, but the moment I enter the correct password and start using it, it would freeze on the homescreen, I would lock and unlock again by typing the password, only to get frozen screen. so power off and reboot, I can type in password again and get to homescreen, this time I could use the device without freezing,
3rd time, it freeze in between.
lock, unlock, reboot, seems to make it work again.
factory reset many times. no effect.
flashed custom ROM LOS 15.1 and LOS 14.1, got process system stopped error on LOS 15.1 and on 14.1 have to log.
Used no mods, no files apart from ROM and opengapps
Clean flash, No external sd card.
My first few suspect,
1. LCD display loose connection that causes the device to sometimes works flawlessly and sometimes make it impossible, opened back panel, did some not so useful checkup, closed again. useless don't try.
2. Messed up OTA updates, flashing stock S223 update, will report if this solved.
3. Overheat, most unlikely,
and the culprit
Lenovo, spoiled Moto as well.
If anyone has any info that they can share, please feel free to comment..
Update
After flashing
Lenovo_K33a42_S223_Q00440_20170610 via QFIL (removed all the data, including the internal sd card)
All The problem seems to be gone, touch is responsive, no freezing or overheating anymore, even the MIC issue was resolved which was present before on this particular unit. noticed unstable and low sim signal sometimes.
I think it's best for anyone who is coming from Stock ROM to flash the Stock ROM via QFIL to avoid such issues first.
Got OTA update K33_S223_170610_ROW_TO_K33_S229_170908_ROW of 76mb
after update again got another one, system looks to be working fine. touch was responsive as well.
K33_S229_170908_ROW_TO_K33_S231_17114_ROW
79MB
after flashing this I could notice touch lags, this is without installing any other 3rd party apps and no files whatsover apart from the ones lenovo pushed through the device.
Hello,
I just upgraded my phone to OOS 9.0.13 and xXx to 6.0. Since then, I can no longer use my fingerprint sensor properly. I can see the icon on my phone but it's a bit darker and when I place my finger on it to unlock, nothing happens. However, if I tap it multiple times, it tells me I'm pressing it too fast but there's no animation like there is when you unlock your phone.
I deleted the fingerprint I had already and now I can't setup a new one because of what it's doing. I power cycled the device, cleared dalvik cache.. still no luck. All I did was booted to recover, flashed the new OOS version, flashed TWRP installer, rebooted to recovery, flashed magisk, flashed Blu_Spark kernel, rebooted system. I've never had this issue before and the fingerprint sensor was working just fine before I made this change.
Any ideas? I've disabled xXx in Magisk and it still didn't work.
Thanks!
mobbdeep said:
Hello,
I just upgraded my phone to OOS 9.0.13 and xXx to 6.0. Since then, I can no longer use my fingerprint sensor properly. I can see the icon on my phone but it's a bit darker and when I place my finger on it to unlock, nothing happens. However, if I tap it multiple times, it tells me I'm pressing it too fast but there's no animation like there is when you unlock your phone.
I deleted the fingerprint I had already and now I can't setup a new one because of what it's doing. I power cycled the device, cleared dalvik cache.. still no luck. All I did was booted to recover, flashed the new OOS version, flashed TWRP installer, rebooted to recovery, flashed magisk, flashed Blu_Spark kernel, rebooted system. I've never had this issue before and the fingerprint sensor was working just fine before I made this change.
Any ideas? I've disabled xXx in Magisk and it still didn't work.
Thanks!
Click to expand...
Click to collapse
It could be the kernel. Doing a search found results in the blu_spark thread with fingerprint issues.
dj_ooms said:
It could be the kernel. Doing a search found results in the blu_spark thread with fingerprint issues.
Click to expand...
Click to collapse
Definitely makes sense now that I think about it. I thought at first only custom ROM's were having that issue
mobbdeep said:
Hello,
I just upgraded my phone to OOS 9.0.13 and xXx to 6.0. Since then, I can no longer use my fingerprint sensor properly. I can see the icon on my phone but it's a bit darker and when I place my finger on it to unlock, nothing happens. However, if I tap it multiple times, it tells me I'm pressing it too fast but there's no animation like there is when you unlock your phone.
I deleted the fingerprint I had already and now I can't setup a new one because of what it's doing. I power cycled the device, cleared dalvik cache.. still no luck. All I did was booted to recover, flashed the new OOS version, flashed TWRP installer, rebooted to recovery, flashed magisk, flashed Blu_Spark kernel, rebooted system. I've never had this issue before and the fingerprint sensor was working just fine before I made this change.
Any ideas? I've disabled xXx in Magisk and it still didn't work.
Thanks!
Click to expand...
Click to collapse
i have the same issue with mine. but i have the stock rom so i dont have any idea how to fix it. i hope there's something wrong with some software update but i rly dont know. If you find something let me know
how is everyones fingerprint scanner? I don't wanna do onscreen cause it's slower than the rear, what about the 7? I'm almost gonna stay with my 6 just because there's no rear anymore....
with every update it becomes quicker, no issues.. there is a big difference since the early updates.
entwicklun said:
how is everyones fingerprint scanner? I don't wanna do onscreen cause it's slower than the rear, what about the 7? I'm almost gonna stay with my 6 just because there's no rear anymore....
Click to expand...
Click to collapse
Traditional sensors are superior in speed and accuracy the in-display fingerprint is garbage and not ready for market. If it's a dealbreaker for you stay with the 6.
entwicklun said:
how is everyones fingerprint scanner? I don't wanna do onscreen cause it's slower than the rear, what about the 7? I'm almost gonna stay with my 6 just because there's no rear anymore....
Click to expand...
Click to collapse
I find it to be excellent. Slightly slower than my 3T, but just as accurate. And MUCH more accurate than my work-provided iPhone 6. The reader learns over time; after about a week or two it was working optimally.
Rear facing FP scanners are the worst in my opinion. A common use case for me is to have the phone on my desk and I like unlocking it without having to pick up the phone to access anything on the back.