Hi,
I lost root after updating to JWR66Y, and when I open up SuperSU, it says "There is no SU binary installed, and SuperSU cannot install it. This is a problem!"
So I turned off my phone, pressed volume down+power button to go into TWRP and re-flash SuperSU.zip, but the screen only shows broken android with exclamation mark on it.
So, my question is, what do I do? I want to flash TWRP via adb and then flash SuperSU.zip via TWRP. Is that the correct procedure? I'm afraid if something goes wrong I won't have a way to restore my nandroid backup or something.
Thanks.
you always lose root if you take an ota update or flash the factory img. when you flash stock, its just that, stock. its been that way since the beginings of android.
you want to fastboot(not adb) a custom recovery, then flash the latest su binaries via your custom recovery.
simms22 said:
you always lose root if you take an ota update or flash the factory img. when you flash stock, its just that, stock. its been that way since the beginings of android.
you want to fastboot(not adb) a custom recovery, then flash the latest su binaries via your custom recovery.
Click to expand...
Click to collapse
To add on what simms22 said,
SuperSU 1.60 flashable zip: http://download.chainfire.eu/350/SuperSU/UPDATE-SuperSU-v1.60.zip
I use Le 2 rooted and TWRP installed..
My question is whether is it possible to download the full stock rom and flash via TWRP recovery possible?
Does it install without any issues...Which Super SU need to flash to maintain root ?
Pls help
sibikallikkat said:
I use Le 2 rooted and TWRP installed..
My question is whether is it possible to download the full stock rom and flash via TWRP recovery possible?
Does it install without any issues...Which Super SU need to flash to maintain root ?
Pls help
Click to expand...
Click to collapse
Yes you can apply ota update via twrp recovery. For this just follow following steps(On your own risk) by the way following method worked for me to apply latest 5.8.0.19s update.
1) Download the latest ota update it should be located here (internal storage/data/com.letv.android.ota/files/otaUpdates) folder.
2) There should be a zip file just cut and paste it in root folder for easy process.
3) Now boot to TWRP recovery and flash zip file which is pasted in root folder.
4) Now format dalvik cache and if you want root, then root again because due to flashingnew rom root access and all other changes you have done in system will lost but all your data will be safe... (This method is usefull for same type of rom i.e. from stock rom to stock rom or custom rom to custom rom).
5) Just for your knowledge 5.8.0.19s update file is full rom file but if you want other versions such as 5.8.0.16s then use offline update packages which are full size i.e. around 1.7 gb.
Also you can flash root since twrp comes with inbuild root tools just locate it in twrp recovery in advanced/tools/root.
Also you can install stock rom just after flashing stock rom in place of any custom rom just wipe data and factory reset and then apply root. and reboot normally.
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.
If we don't have TWRP,
How do we root the device?
Magisk has the option to patch a boot.img file. Technically, you could:
1. pull the boot.img file from the A10 OB1 zip
2. copy it to the phone's internal storage
3. install latest magisk manager, click on install - patch boot.img - choose the boot.img
4. copy the patched boot.img to a pc with ADB and USB drivers
5. put the phone in fastboot mode, sideload the boot.img
I have no idea if this would work, but you could give it a go. I believe that someone else already made a guide for exactly this here in the OP6T forum.
Refer to the twrp thread for OB 10.
https://forum.xda-developers.com/oneplus-6t/help/how-to-flash-twrp-android-10-beta-1-t3986345
Either do the OTA local upgrade and magisk uninstall then install to inactive slot method, or use the boot patch which there is another thread on that on the ROM Dev section.
I used the first, worked fine. But there is no supported twrp yet. Only magisk root is officially supported on Q.
Hello, After Root, it's impossible for me to boot on recovery mode
Always i'll want to do or, thé phone reboot on fastmode.
g4seb said:
Hello, After Root, it's impossible for me to boot on recovery mode
Always i'll want to do or, thé phone reboot on fastmode.
Click to expand...
Click to collapse
Yes, likely because the update flashed to the inactive, and there is no recovery now. So...if you want recovery, only way is to full wipe and do a MSM or flash all and wipe with older stable.
OP support/forums made announcements on their thread on what will happen with upgrading, or rolling back.
They have a rollback file you can download if you want it all working again including recovery. But you will get wiped as mentioned, and be back on the last stable and firmware. Then you can twrp and root all over again.
That is Beta testing for you!!