If we don't have TWRP,
How do we root the device?
Magisk has the option to patch a boot.img file. Technically, you could:
1. pull the boot.img file from the A10 OB1 zip
2. copy it to the phone's internal storage
3. install latest magisk manager, click on install - patch boot.img - choose the boot.img
4. copy the patched boot.img to a pc with ADB and USB drivers
5. put the phone in fastboot mode, sideload the boot.img
I have no idea if this would work, but you could give it a go. I believe that someone else already made a guide for exactly this here in the OP6T forum.
Refer to the twrp thread for OB 10.
https://forum.xda-developers.com/oneplus-6t/help/how-to-flash-twrp-android-10-beta-1-t3986345
Either do the OTA local upgrade and magisk uninstall then install to inactive slot method, or use the boot patch which there is another thread on that on the ROM Dev section.
I used the first, worked fine. But there is no supported twrp yet. Only magisk root is officially supported on Q.
Hello, After Root, it's impossible for me to boot on recovery mode
Always i'll want to do or, thé phone reboot on fastmode.
g4seb said:
Hello, After Root, it's impossible for me to boot on recovery mode
Always i'll want to do or, thé phone reboot on fastmode.
Click to expand...
Click to collapse
Yes, likely because the update flashed to the inactive, and there is no recovery now. So...if you want recovery, only way is to full wipe and do a MSM or flash all and wipe with older stable.
OP support/forums made announcements on their thread on what will happen with upgrading, or rolling back.
They have a rollback file you can download if you want it all working again including recovery. But you will get wiped as mentioned, and be back on the last stable and firmware. Then you can twrp and root all over again.
That is Beta testing for you!!
Related
Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.
Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works
First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.
Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!
Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!
no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*
Hi guys,
I have gone thru the forum to install Magisk systemless root in S7 Edge running 8.0 but have few questions.
1. Is TWRP mandatory to install Magisk for systemless root?
2. If above point is yes, then will the device be eligible for OTA even with TWRP recovery?
3. Please provide steps to install Magisk systemless root in S7 Edge running 8.0 latest October patch
Thanks in advance.
mpadhu said:
Hi guys,
I have gone thru the forum to install Magisk systemless root in S7 Edge running 8.0 but have few questions.
1. Is TWRP mandatory to install Magisk for systemless root?
2. If above point is yes, then will the device be eligible for OTA even with TWRP recovery?
3. Please provide steps to install Magisk systemless root in S7 Edge running 8.0 latest October patch
Thanks in advance.
Click to expand...
Click to collapse
Go Here https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-root-android-8-0-oreo-t3840271
1. U need TWRP for flashing Magisk.
2. When ur intentions are gaining root access, u should forgo OTA.
3. The above link has everything u need.
joeljose1001 said:
Go Here https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-root-android-8-0-oreo-t3840271
1. U need TWRP for flashing Magisk.
2. When ur intentions are gaining root access, u should forgo OTA.
3. The above link has everything u need.
Click to expand...
Click to collapse
Thank you for your time and response. There is something called systemless root which will hide the root from the system and also allows official OTA updates.
mpadhu said:
Thank you for your time and response. There is something called systemless root which will hide the root from the system and also allows official OTA updates.
Click to expand...
Click to collapse
From what I know, when you download an OTA and prompt your device to install it, your Android system performs a series of checksums to ensure that your /system, /boot, /recovery, and /vendor (or /OEM) partitions are unmodified from their original stock configuration.
The benefit of Magisk is that it does not modify the system partition, but while installing Magisk, the first thing it does is patch boot image. So you might have to restore the original boot image for the OTA to work.
Also, the OTA is designed to be installed via the stock recovery which has been overwritten with TWRP. So, I think u will face a problem there too.
I'm not saying that it's impossible to get an OTA update. It just might not be as easy as u r used to.
joeljose1001 said:
From what I know, when you download an OTA and prompt your device to install it, your Android system performs a series of checksums to ensure that your /system, /boot, /recovery, and /vendor (or /OEM) partitions are unmodified from their original stock configuration.
The benefit of Magisk is that it does not modify the system partition, but while installing Magisk, the first thing it does is patch boot image. So you might have to restore the original boot image for the OTA to work.
Also, the OTA is designed to be installed via the stock recovery which has been overwritten with TWRP. So, I think u will face a problem there too.
I'm not saying that it's impossible to get an OTA update. It just might not be as easy as u r used to.
Click to expand...
Click to collapse
Got your point. Thank you. I read that Magisk can be installed without root or even custom recovery.
The below is taken from the official Magisk thread https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
How to download or extract the stock boot image file from my official ROM?
"Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img"
I have OP6T OxygenOS 9.0.16 and I would like to update it to the latest 10.3.3 with root.
What should be my process of doing so? I have not been in touch with rooting for the past 3 years so I don't want to mess things up. Another note is that while I am on OxygenOS 9.0.16 I tried to root it which was failed, but now few banking and calling apps such as TextNow thinks that my phone is rooted and they can not run -- but my phone is not properly rooted according to root verification apps.
Please tell me how should I do the update to the latest version from this point and then I would like to unlock bootloader and install recovery and root it as well.
Please advice.
BTW my OP6T is global
a4abbas said:
I have OP6T OxygenOS 9.0.16 and I would like to update it to the latest 10.3.3 with root.
What should be my process of doing so? I have not been in touch with rooting for the past 3 years so I don't want to mess things up. Another note is that while I am on OxygenOS 9.0.16 I tried to root it which was failed, but now few banking and calling apps such as TextNow thinks that my phone is rooted and they can not run -- but my phone is not properly rooted according to root verification apps.
Please tell me how should I do the update to the latest version from this point and then I would like to unlock bootloader and install recovery and root it as well.
Please advice.
BTW my OP6T is global
Click to expand...
Click to collapse
Hello,
Here is a link that will help you out with this update process:
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
a4abbas said:
I have OP6T OxygenOS 9.0.16 and I would like to update it to the latest 10.3.3 with root.
What should be my process of doing so? I have not been in touch with rooting for the past 3 years so I don't want to mess things up. Another note is that while I am on OxygenOS 9.0.16 I tried to root it which was failed, but now few banking and calling apps such as TextNow thinks that my phone is rooted and they can not run -- but my phone is not properly rooted according to root verification apps.
Please tell me how should I do the update to the latest version from this point and then I would like to unlock bootloader and install recovery and root it as well.
Please advice.
BTW my OP6T is global
Click to expand...
Click to collapse
Flash OOS full rom zip on both slots using TWRP also flash TWRP installer zip on both slots reboot recovery flash magisk reboot system. Easy peasy.
Example:
Boot recovery: fastboot boot twrp.img
flash OOS 10.3.3 full rom zip
flash TWRP installer zip, reboot recovery,
flash OOS 10.3.3 full rom zip, format data, wipe data,
flash TWRP installer zip
Reboot recovery, flash magisk,
reboot system.
Note: I use a USB stick. I flash magisk zip off my USB stick.
That's what I do when I use OOS on my 6t far as installation goes.
Edited
flash713 said:
Flash OOS full rom zip on both slots using TWRP also flash TWRP installer zip on both slots reboot recovery flash magisk reboot system. Easy peasy.
Example:
Boot recovery: fastboot boot twrp.img
flash OOS 10.3.3 full rom zip
flash TWRP installer zip, reboot recovery,
flash OOS 10.3.3 full rom zip, format data, wipe data,
flash TWRP installer zip
Reboot recovery, flash magisk,
reboot system.
Note: I use a USB stick. I flash magisk zip off my USB stick.
That's what I do when I use OOS on my 6t far as installation goes.
Edited
Click to expand...
Click to collapse
Are you sure there is no need to update to 9.0.17 and then 10.3.3?
I've asked once and someone said that 9.0.17 is neccessary before update to 10.3.x.
Also there is option to flash from system without losing magisk modules:
1. Flash manually from update center (do not reboot)
2. Enter magisk and flash to another slot (after OTA)
3. Flash TWRP installer like magisk module
4. Reboot
But I'm not sure if I remember it correctly.
Michalec said:
Are you sure there is no need to update to 9.0.17 and then 10.3.3?
I've asked once and someone said that 9.0.17 is neccessary before update to 10.3.x.
Also there is option to flash from system without losing magisk modules:
1. Flash manually from update center (do not reboot)
2. Enter magisk and flash to another slot (after OTA)
3. Flash TWRP installer like magisk module
4. Reboot
But I'm not sure if I remember it correctly.
Click to expand...
Click to collapse
10.3.3 is all that you need. 9.0.17 isn't the only way anymore.
Michalec said:
Are you sure there is no need to update to 9.0.17 and then 10.3.3?
I've asked once and someone said that 9.0.17 is neccessary before update to 10.3.x.
Also there is option to flash from system without losing magisk modules:
1. Flash manually from update center (do not reboot)
2. Enter magisk and flash to another slot (after OTA)
3. Flash TWRP installer like magisk module
4. Reboot
But I'm not sure if I remember it correctly.
Click to expand...
Click to collapse
I have a T-Mobile SIM unlock OnePlus 6t and I converted it to an international model so when my conversation was done I was on OOS 9.0.1.1 and I booted TWRP and installed 10.3.4 full rom on both slots and also recovery installer and all just like my previous posts stated and everything went fine. I used mauronofrio's TWRP the version just before the latest 3.4xx when I did this.
I always download quite a bit of various firmwares and also TWRP versions before I start flashing things just in case something goes wrong I already have other things maybe I can use and I don't have to stop and wait for some download to finish... And I'm quite sure you know this but definitely make a backup of everything beforehand to USB or transfer it to your pc just in case you end up needing it as a precaution.
Edit added:
I am assuming that you already unlocked your bootloader... I believe everyone knows to do that that's on XDA forums before you can do anything to any device .. I say this after reading post below me here. I guess I should have said that earlier but I just assume everyone knows that on the forums... My bad. ??
From fastboot on Linux PC:
sudo fastboot oem unlock (then hit enter on keyboard) use volume keys to move to unlock option and your Power button to select it and confirm. For more info see: https://www.xda-developers.com/oneplus-6t-unlock-bootloader-root/
Super easy to unlock bootloader just remember it does wipe your device clean so move anything to want to PC or USB stick first...
I would think you could just update oxygenOS to latest then re-root no? Assuming your already bootloader unlocked which it seems like would be the case if you have an obsolete magisk installation.
Edit: re-reading your post maybe it is not unlocked as you failed to root. In this case just unlock then flash the latest fastboot image and then magisk as others have already stepped you through. You will lose data when you unlock so backup first.
So if I'm on 9.0.16 I could flash latest OOS directly from TWRP and then flash magisk? And no data loss? Of course I'm rooted with bootloader unlocked.
Oh dear this process is getting harder because recently I was busy doing other things it sounds way harder it actually is. Isnt there a way I pay someone on this forum so that user help me do this. Like download stuff links and proper version and follow me up with it because i want to do this without messing things up!
a4abbas said:
Oh dear this process is getting harder because recently I was busy doing other things it sounds way harder it actually is. Isnt there a way I pay someone on this forum so that user help me do this. Like download stuff links and proper version and follow me up with it because i want to do this without messing things up!
Click to expand...
Click to collapse
It is indeed a tough job. This A/B partition has had a lot of people bootloop/soft bricked their phones.
However, you need not pay anybody anything. If you are on stock, I would've recommended you upgrading it via Oxygen updater (a 3rd party app on the play store) and then using the latest recoveries (TWRP 3.4) and flashing it via Fastboot mode.
It is super easy.
Update 220823: Update for TWRP 12 and some other minor changes due to the switch from SafetyNet API to Play Integrity API
Updated 211203: include Magisk Canary
Edited 220113: correct a mistake in the Keeping Root process; some formatting changes
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
OOS 11: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449
OOS 12: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/...win-recovery-project-8t-9r-2022-07-27.4473983
Magisk apk - using stable from https://github.com/topjohnwu/Magisk/releases or using Canary from https://github.com/topjohnwu/magisk-files/tree/canary
Universal SafetyNet Fix (UNSF-MOD) by @Displax from https://github.com/Displax/safetynet-fix/tree/integrity
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
Boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it. Also install USNF if you are using Magisk Canary.
If you want to keep TWRP then install the TWRP installer zip.
Reboot.
If you are using Magisk Canary, in Magisk>Settings enable Zygisk, Enforce DenyList, and Configure DenyList. Then reboot.
Keeping Root on an incremental OTA update
Note: you do NOT need to (but can if you want to) follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you.
If your phone tells you you have an update:
If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot.
In Magisk tap on "Uninstall Magisk" and select "Restore images".
Install the OTA update but don't reboot yet.
Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root.
Reboot
When the phone has successfully rebooted the updated system, boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current recovery partition as you'll need it for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
If you want to keep TWRP then flash the TWRP installer zip.
Reboot and disable airplane mode.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggest this method (https://forum.xda-developers.com/t/...1-kb2003-kb2005.4178675/page-25#post-85386145) but this doesn't work for everybody (it doesn't for me).
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an OTA update
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
morphius88 said:
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
Click to expand...
Click to collapse
Best place for getting support for Magisk is https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
berthur said:
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
Click to expand...
Click to collapse
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
BillGoss said:
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
Click to expand...
Click to collapse
Than you!
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Wishmasterflo said:
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Click to expand...
Click to collapse
Download the zip from https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ and then use payload dumper to extract the files.
That worked like a charm. Thanks a lot.
I'm Magisk rooted and I have TWRP installed on my 8T EU model.
The OnePlus updater app registers that I am rooted and wants to download the full OTA.
Do I also have to do all the things you described after "Keeping Root on an OTA update" or is there a simpler way?
If yes, then I have a question regarding this step:
2. In Magisk tap on "Uninstall Magisk" and select "restore images".
Click to expand...
Click to collapse
Did Magisk automatically backup these images? Because I didn't do it myself. I only have backed up all my partitions (including boot) after I had installed TWRP and before I rooted.
EDIT:
BillGoss has thankfully already replied in another thread (in which I have basically asked the same question because I am an impatient bast***) where I suggested the overly present "easy" update scheme, which he expects to work. So this should be fine for other people in my situation:
1. Let the system download and install full OTA and DO NOT let the device reboot after it's done
2. Install TWRP A/B Retention Script
3. Install Magisk to inactive slot and reboot
EDIT2:
I just want to add that before having done the above mentioned steps 1-3, I have disabled all Magisk modules and rebooted the device. So the full procedure is the following:
1. Disable all Magisk modules and reboot
2. Let the system download and install full OTA and DO NOT let the device reboot after it's done
3. Install TWRP A/B Retention Script
4. Install Magisk to inactive slot and reboot
Youtube step by step video (he says that he "uninstalls" the Magisk modules but he just deactivates them):
Thanks @haitower
I've updated the OP to make it clear that the process described there only applies to incremental updates.
Also, to answer your question re Magisk backups: Magisk writes a copy of the installed boot image to /data/Magisk* before patching it. A "restore image" uses that backup.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" but this doesn't work for everybody (it doesn't for me) which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an incremental OTA update
Note: you do NOT need to follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
e1thx said:
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
Click to expand...
Click to collapse
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Hello!
Today I saw that EU: 11.0.12.12.KB05BA was available as OTA Update so I started to download it using the "Keep root on OTA Update".
During the download I recognized that I was still only connected to mobile network 4G instead of WiFi.
So I stopped the download of the OTA, restarted the phone and turned on WiFi but now I don't get the notification for the new OTA Update anymore and when checking for new Updates it says that my OOS 11.0.11.11 is up to date.
I guess the system has somewhere already stored that I started the download of the new 11.0.12.12 OTA but did not finish it and now I don't get the message to download it anymore.
Any idea how I can fix this so that I can download the new OTA again?
Thanks a lot!
EDIT: I am downloading it now via OxygenOS Updater (the full OTA).
BillGoss said:
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Click to expand...
Click to collapse
I understand that if I want to restore system and data when something doesn't work for me then I just do recovery for all the partitions, system, data etc that I do in twrp?
Please see the update in the OP regarding OOS 12.
I've been running custom roms since before android was a thing so I'm usually pretty good at this stuff.
I'm running 11.0.9.9 IN11AA
It refuses to root. I'm not sure if there is some step I'm missing that's so obvious nobody mentions it?
I was rooted, but when the new Magisk 23 came out without Magisk hide.. it was a big problem for me. I have corporate apps that will refuse to work on a rooted device. I restored the stock images (just like I do to get my OTA).. but then I uninstalled Magisk 23 and Installed 22.1. I then patched the bootloader (Dire3ct Install) and all was good, until I rebooted and had no root.
My bootloader is unlocked.
So I downloaded the full stock rom v11.0.9.9 IN11AA directly from Oneplus.
Extracted payload.bin
Used Payload dumper to get the proper boot.img.
Copied boot.img to my device and used magisk 22.1 to patch the file.
Downloaded the patched boot.img to my desktop.
Used ADB to flash it
adb reboot bootloader
fastboot flash boot patched_boot.img
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
fastboot reboot
Nothing. No Root.
I tried this over and over with different versions of magisk.
I tried downloading pre-patched version, and using fastboot boot patched_boot.img.
The device just hangs, and then boots using the stock image. No root.
I have no idea what could be wrong.
Ideas?
I just updated from v11.0.8.8 to v11.0.9.9 today on the EU variant.
Downloaded the update via Oxygen Updater, then used the built in updater with the local file downloaded.
Before restarting the device, opened up Magisk, then clicked "Install to inactive slot" since the new update gets put on the inactive slot. After it installed, rebooted the phone, and done. Updated to latest, and kept root. Didn't even turn off the modules, although I only have 1 installed.
This is my usual method to keep root while updating.
I'm not sure where you got your Magisk from, but i'm using v23.0 from the official github page (HERE), and it still has MagiskHide built-in, and currently using it for all of my banking apps, and it works.
Most likely the issue is that you have used the old Magisk version to patch the file.
Download the app from the link above, and use that to patch your boot.img file.
While the extracted file should work as flashed, I like to just boot from it rather than flash it and make it "permanent".
Use fastboot boot patched_boot.img to boot using the file once only.
After starting up, you should have Magisk installed in a couple of seconds. It might prompt you to restart the phone when opening it first time, but just ignore that and do not restart as you'll lose the root. Alternatively, you can install the app when you're not rooted yet, and when you boot using the patched boot.img, you won't need to restart.
When done, Magisk should tell that you have 23.0(23000) installed.
Then just use the built-in Install > Direct Install (Recommended) option within Magisk to install it to the current slot.
Do NOT install it to inactive slot. This option only to be used when updating via OTA.
Other option:
Download the Magisk app from the link above, and rename it to magisk.zip then copy it to your phone.
Download TWRP from HERE to your PC and use fastboot flash recovery twrp.img to flash this recovery.
Reboot to recovery. (Might take 2-3 mins to boot first time)
Flash the magisk.zip using recovery.
That's all you should need to be able to root.
I appreciate the help.
I was so hopeful you gave me what I needed, but it didn't work.
So, It wasn't an update issue... it was more of an attempt to downgrade Magisk.
I always OTA the same way as you and it always works.
I also always get Magisk from the official Github page.
What I got excited about was that I wasnt aware there was a working TWRP! So I thought.. THAT will fix it.
I didnt flash it, I just booted from it. I flashed Magisk that way, BUT... still not rooted.
Here is the interesting bit.. when flashing Magisk via TWRP, it detected that my boot.img was already Magisk patched and not stock (Which is right). It's like the boot.img is correctly patched, Magisk just isn't seeing it.
I'd be ok with a full wipe and factory reset at this point, but I'm not even sure that will fix it.
** Edit - I tried manually flashing the latest full OOS downloaded from Oneplus. It didnt help. I finally factory reset and it's working now.
This is my fav. root method.
[GUIDE] Easiest way to root/magisk Oneplus 8 Pro
This method will not flash any custom recovery or any custom boots. Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind Prerequisites: Oxygen OS 11 (tested with 11, issues reported with 10) and a PC with...
forum.xda-developers.com
ps000000 said:
This is my fav. root method.
[GUIDE] Easiest way to root/magisk Oneplus 8 Pro
This method will not flash any custom recovery or any custom boots. Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind Prerequisites: Oxygen OS 11 (tested with 11, issues reported with 10) and a PC with...
forum.xda-developers.com
Click to expand...
Click to collapse
Agreed, this is a great method. I tried that too before I ended up doing a reset... no good. I somehow broke something with the rom outside of Magisk so that Magisk wouldnt work. Whatever it was, A full wipe fixed it..