Related
i upgraded lenovo a6000 plus from kitkat to lollipop beforehand
i rooted my lenovo a6000 plus using twrp 2.8.7.7 by using supersu.zip
i wiped my internal storage(accidently) including backup
tried installing custom roms but they stopped on logo screen for infinite time(>40min)
then i flashed philz.zip and now i cannot access recovery
neither i can detect my phone on pc as a storage(instead of control panel>devices&printers>android)
i can either wait on lenovo screen or other bootloader with hold power to reboot screen
need urgent help plz
Same issue
My phone is now working
rajat224 said:
My phone is now working
Click to expand...
Click to collapse
How
---------- Post added at 05:26 AM ---------- Previous post was at 05:26 AM ----------
ajm93 said:
How
Click to expand...
Click to collapse
Help me
Do u have custom recovery installed?
I have twrp
Ys i installed and now the Phone didnt on...but detect as qualcomm hs usb diag 9006 when conneted to usb
---------- Post added at 10:20 AM ---------- Previous post was at 10:13 AM ----------
How can i install Stock rom in my phone using qfil tool...i used to download stock rom via QFIL but...failed "Failed to switch Emergency download mode...i cant detect my phone in fastboot...Big problems please help me
Can u go into recovery??
If not download twrp for ur phone and in downloaded recovery folder use cmd.exe (shift+right click)
Fastboot flash recovery recovery.img
At boot loader screen
I cant goto recovery
---------- Post added at 10:27 AM ---------- Previous post was at 10:26 AM ----------
Phone is not starting
---------- Post added at 10:27 AM ---------- Previous post was at 10:27 AM ----------
Any solutions
---------- Post added at 09:29 AM ---------- Previous post was at 09:27 AM ----------
hello
U have lenovo a6000 or a6000 plus?
How were u able to boot into recovery??
Can u reach lenovo screen with 'long press power button to reboot' written on bottom
Try that with pressing vol down and power key simultaneously
follow this steps https://devs-lab.com/how-to-unbrick-dead-lenovo-a6000-plus-or-revert-back-to-kitkat-4-4-4.html
but in step 3 and 4 you can juste witch off your device. Press & Hold Vol Down+Power+Home. and connect your cable before clic in dowload in QcomDloader.exe.. good luck
nanix06 said:
follow this steps https://devs-lab.com/how-to-unbrick-dead-lenovo-a6000-plus-or-revert-back-to-kitkat-4-4-4.html
but in step 3 and 4 you can juste witch off your device. Press & Hold Vol Down+Power+Home. and connect your cable before clic in dowload in QcomDloader.exe.. good luck
Click to expand...
Click to collapse
No i used other method not qfil or others like miflasher boot ur phone into bootloader screen & cmd from recovery folder -"fastboot flash recovery recovery. img"to flash twrp
Moreover a6000 plus does not have home button
rajat224 said:
No i used other method not qfil or others like miflasher boot ur phone into bootloader screen & cmd from recovery folder -"fastboot flash recovery recovery. img"to flash twrp
Click to expand...
Click to collapse
yeh this is other metode is correct too, thank's:good::good:
---------- Post added at 09:08 PM ---------- Previous post was at 09:04 PM ----------
rajat224 said:
Moreover a6000 plus does not have home button
Click to expand...
Click to collapse
yes there are not a home button juste up down and power ... up+power= menu
down+power=bootloder
up+down+power=recovery
Were u able to boot into recovery??
It is much easier method
I actually tried everything from devlabs before but was unsuccessful so came up with this
If it was helpful please give a thanks in thanks meter
Then download stock ROM lollipop or kitkat and install zip directly or if its not working extract lollipop ROM then flash system.zip and ota.zip
i am having the same problem plz help me it is not detecting as qualcomm also wat to do
what is philz.zip?
thegreatdead69 said:
what is philz.zip?
Click to expand...
Click to collapse
My friend flashed it to install philz recovery in my phone
vivek vijayan said:
i am having the same problem plz help me it is not detecting as qualcomm also wat to do
Click to expand...
Click to collapse
Install recovery first and through it go for stock rom use fastboot method discussed above or message me
Hey guys,
I flashed the new firmware of the s7 edge ;oreo 8.0
But what i was forgot its that i need to verify my account after the flashing, unfortunatly i disnt know what was the google account, how can i bypass the frp lock?
I am trying to downgrade but the odin block it beacause the frp lock,
Someone know how to help me to unlock the frp lock in samaung galaxy s7 edge SM-G935F 8.0 Oreo?
Please help me its really really important for me, please!!??
you have to flash stock firmware. Download the firmware, then flash it via Odin. You have to go to download mode - press and hold power, home, volume down. After phone vibrates, release the buttons. Then you can flash software via odin.
wratnik said:
you have to flash stock firmware. Download the firmware, then flash it via Odin. You have to go to download mode - press and hold power, home, volume down. After phone vibrates, release the buttons. Then you can flash software via odin.
Click to expand...
Click to collapse
mate, you didnt understand me , i cant flash old firmewares, because the Bootloader (8.0) block it because FRP lock
you have for me another solution because your solution isnt right
thanks to anyone if you will succed to help me!
dor19741 said:
mate, you didnt understand me , i cant flash old firmewares, because the Bootloader (8.0) block it because FRP lock
you have for me another solution because your solution isnt right
thanks to anyone if you will succed to help me!
Click to expand...
Click to collapse
I bet you are doing it wrong. Download mode is indestructible, samsung s7 cannot be hard bricked, see my other thread. No matter if bootloader is locked/damaged/missing. Download mode is always working. You will get to download mode from FRP lock by holding power, home and volume down. If not, turn off the phone by holding power. Then hold the 3 buttons. If you cannot get out of frp lock message, hard reboot the phone by holding home+power, once the screen goes off keep holding the buttons but also press and hold volume down button. There's plenty of youtube videos on how to do it. It's easy as pie.
same Problem here.. can't figure it Google bypass on Galaxy S7 oreo but sm-g930fd ... help please
any way to clean FRP
---------- Post added at 08:38 PM ---------- Previous post was at 08:35 PM ----------
May it help you: https://www.youtube.com/watch?v=qtc-wuXaShg
But my case is SM-G930fd
Ok i have a solution for FRP lock at Binary 2 (u2) firmware, all u need is downgrade to latest 7.0 (Binary 2), for example G935FXXS2DRDI. After phone boot up download and flash G935FXXU1BPH6 firmware. At Odin (Odin3_v3.13.1) just set AP and CSC (not Home_CSC) and start, phone should boot up with 6.0.1 firmware after that use this instruction: https://www.youtube.com/watch?v=VJOVbi2RyAA
i just lost 3 days trying to find solution omg
kamikaze134x
that was simple as fvck
thank you soooo much
u the man
can used this method for g930f? tq
---------- Post added at 08:35 PM ---------- Previous post was at 08:35 PM ----------
kamikaze134x said:
Ok i have a solution for FRP lock at Binary 2 (u2) firmware, all u need is downgrade to latest 7.0 (Binary 2), for example G935FXXS2DRDI. After phone boot up download and flash G935FXXU1BPH6 firmware. At Odin (Odin3_v3.13.1) just set AP and CSC (not Home_CSC) and start, phone should boot up with 6.0.1 firmware after that use this instruction: https://www.youtube.com/watch?v=VJOVbi2RyAA
Click to expand...
Click to collapse
can used this method on G930F?? tq
Yes u can, i use it at G930F and works, just download same firmware as G935F for G930F
Hello dor19741 ,
I had the same problems with a SM-G930F ( 8.0.0 / Oreo / S3 ) and i can't downgrade it to 7.0 but i find a way to bypass FRP !
- Go into Download-Mode
- Flash the right "Combination-Rom-File" for your Oreo Firmware with Odin
- Boot up into Recovery and do a Factory-Reset
- Then Boot up the Combination-Rom and enable "Developer-Options" and "USB-Debuging"
- Power Off
- Take Your Oreo Rom and extract the AP and BL Files to put the boot,system and sboot files in a new tar-archive-file
- Flash the new tar-archive-file with Odin as AP and you are done!
BenchBox said:
Hello dor19741 ,
I had the same problems with a SM-G930F ( 8.0.0 / Oreo / S3 ) and i can't downgrade it to 7.0 but i find a way to bypass FRP !
- Go into Download-Mode
- Flash the right "Combination-Rom-File" for your Oreo Firmware with Odin
- Boot up into Recovery and do a Factory-Reset
- Then Boot up the Combination-Rom and enable "Developer-Options" and "USB-Debuging"
- Power Off
- Take Your Oreo Rom and extract the AP and BL Files to put the boot,system and sboot files in a new tar-archive-file
- Flash the new tar-archive-file with Odin as AP and you are done!
Click to expand...
Click to collapse
hI CAN YOU please provide links for the combination rom you used?
I have same issue with samsung s7 GM-930W8 on 8.0.0
legendzj said:
hI CAN YOU please provide links for the combination rom you used?
I have same issue with samsung s7 GM-930W8 on 8.0.0
Click to expand...
Click to collapse
Sorry, i can't send links in my posts I am new here in this forum. I will send you a pm with the link you need.
---------- Post added at 03:27 AM ---------- Previous post was at 03:21 AM ----------
legendzj said:
hI CAN YOU please provide links for the combination rom you used?
I have same issue with samsung s7 GM-930W8 on 8.0.0
Click to expand...
Click to collapse
PLS give the full name of your running Firmware , i will have a look if the link i send you was usefull for you.
BenchBox said:
Sorry, i can't send links in my posts I am new here in this forum. I will send you a pm with the link you need.
---------- Post added at 03:27 AM ---------- Previous post was at 03:21 AM ----------
PLS give the full name of your running Firmware , i will have a look if the link i send you was usefull for you.
Click to expand...
Click to collapse
Hi
This is what it says on recovery screen
8.0.0 / R16NW / G930W8VLU5CRI2
legendzj said:
Hi
This is what it says on recovery screen
8.0.0 / R16NW / G930W8VLU5CRI2
Click to expand...
Click to collapse
I can't find a combination file for g930w with u5 only with u4 , try the one i send you per pm ! Good Luck
BenchBox said:
I can't find a combination file for g930w with u5 only with u4 , try the one i send you per pm ! Good Luck
Click to expand...
Click to collapse
Did it work?? I have a 5 too and I'm desperately trying to find a solution to this
chasethecarrot said:
Did it work?? I have a 5 too and I'm desperately trying to find a solution to this
Click to expand...
Click to collapse
930w8,also locked out by google login loop / last owner (ME) not working..
BenchBox said:
Hello dor19741 ,
I had the same problems with a SM-G930F ( 8.0.0 / Oreo / S3 ) and i can't downgrade it to 7.0 but i find a way to bypass FRP !
- Go into Download-Mode
- Flash the right "Combination-Rom-File" for your Oreo Firmware with Odin
- Boot up into Recovery and do a Factory-Reset
- Then Boot up the Combination-Rom and enable "Developer-Options" and "USB-Debuging"
- Power Off
- Take Your Oreo Rom and extract the AP and BL Files to put the boot,system and sboot files in a new tar-archive-file
- Flash the new tar-archive-file with Odin as AP and you are done!
Click to expand...
Click to collapse
Thanks man really helpful. I was close to giving up and in the end it was quite simple.
I used COMBINATION_FA60_G935FXXU3ARI2_CL7964511_QB19635521_REV00_user_mid_noship.tar.md5 for my s7 edge g935f. Jut googling the filename should be enough to find the rom.
good luck everyone.
guys i dont understand how to make the new tar file? ive put boot sboot and system into a new tar but odin just stalls on analylizing file?! do i need to replace the files in the combination rom with these then make the new tar?
wratnik said:
I bet you are doing it wrong. Download mode is indestructible, samsung s7 cannot be hard bricked, see my other thread. No matter if bootloader is locked/damaged/missing. Download mode is always working. You will get to download mode from FRP lock by holding power, home and volume down. If not, turn off the phone by holding power. Then hold the 3 buttons. If you cannot get out of frp lock message, hard reboot the phone by holding home+power, once the screen goes off keep holding the buttons but also press and hold volume down button. There's plenty of youtube videos on how to do it. It's easy as pie.
Click to expand...
Click to collapse
lol you actually have no idea what you're talking about
BenchBox said:
Hello dor19741 ,
I had the same problems with a SM-G930F ( 8.0.0 / Oreo / S3 ) and i can't downgrade it to 7.0 but i find a way to bypass FRP !
- Go into Download-Mode
- Flash the right "Combination-Rom-File" for your Oreo Firmware with Odin
- Boot up into Recovery and do a Factory-Reset
- Then Boot up the Combination-Rom and enable "Developer-Options" and "USB-Debuging"
- Power Off
- Take Your Oreo Rom and extract the AP and BL Files to put the boot,system and sboot files in a new tar-archive-file
- Flash the new tar-archive-file with Odin as AP and you are done!
Click to expand...
Click to collapse
This didnt work for me, from what i understand extracting oreo files and zipping them again flashes the oreo rom...........so not sure how this works?
Hello all, I am on the u1 firmware.
I need to go back to stock u tmobile to unlock the phone.
Everything I have tried keeps failing.
can someone help me?
I'm in the same boat, please update if you find a solution and I will do the same
Have the phone in download mode, and attempt to flash stock software. It will come back failed. Keep odin running, and reboot the phone again into download mode by holding down vol- power and bixby. When you press vol + to enter download mode, click the start button in odin. Everything should flash properly now.
Don't know why it does this, but this is the current workaround.
anactoraaron said:
Have the phone in download mode, and attempt to flash stock software. It will come back failed. Keep odin running, and reboot the phone again into download mode by holding down vol- power and bixby. When you press vol + to enter download mode, click the start button in odin. Everything should flash properly now.
Don't know why it does this, but this is the current workaround.
Click to expand...
Click to collapse
If you have TMobile firmware on it now. As in g950u. Flash the current revision combination room 5th digit from end though 5. U1 is a model number. Not firmware. But flash the combination ROM. Of same revision on device now. Then you can flash same revision of U1 firmware. From there. This changing back to unlocked model U1.
Basically you cannot just cross flash as t mobile is a 950u and U1 is technically a different model so no direct cross model flashing
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
jrbooth3 said:
I'm in the same boat, please update if you find a solution and I will do the same
Click to expand...
Click to collapse
My answer above may help
TheMadScientist said:
If you have TMobile firmware on it now. As in g950u. Flash the current revision combination room 5th digit from end though 5. U1 is a model number. Not firmware. But flash the combination ROM. Of same revision on device now. Then you can flash same revision of U1 firmware. From there. This changing back to unlocked model U1.
Basically you cannot just cross flash as t mobile is a 950u and U1 is technically a different model so no direct cross model flashing
---------- Post added at 05:32 PM ---------- Previous post was at 05:31 PM ----------
My answer above may help
Click to expand...
Click to collapse
They used the prince comsy odin to flash the u1 unlocked firmware on their tmo s8. They can use the standard odin to flash back to tmo firmware to unlock the phone through the device unlock app. Odin seems to fail for some reason (could be some change in the BL from the original).
The only way to have odin work is to load up odin, select the bl, ap, cp, and csc files. Click start. It will fail (successful 0 , failed 1). Leave odin running and reboot the device again to download mode. As soon as you are in download mode (after leaving odin open with all the proper files selected) press start on odin. It will now work.
Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
https://androidfilehost.com/?fid=746163614322275276
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help
I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help
alaa92 said:
I manage to solve the product name in Download Mode and now it's showing GT-I9301I
but the phone is still not boot with booloop and no recovery mode.
Any help
Click to expand...
Click to collapse
download the right rom and flash it with odin
abdullah1038 said:
download the right rom and flash it with odin
Click to expand...
Click to collapse
I have tried to flahs it with multiple rom but same problem
Also i have tried a repair firmware (4 files) but same problem
It's just keep rebooting with blue text on top (Recovery booting.....)
Any help
any help please
alaa92 said:
any help please
Click to expand...
Click to collapse
try this it might work
download this file and extract it
http://allmobilesoft.com/zip/uploads/2016/12/I9301I-PIT-File-allmobilesoft.com_.rar
connect your phone with odin and click pit
and select the extracted file
click on repartition
click on pda and select the right rom for your phone
then click start it will take about 20 minutes.
remember i am not responsible if you bricked your device.
Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.
alaa92 said:
Finally i have managed to fix the phone.
I have extract the boot.img from firmware then flash it using odin without reboot
then install repair firmware
this the firmware i have used
i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip
The method i have found it:
1- flash the phone with repair firmware. (i9301iXXUANF5_OJVUANF1_Arabic_v4.4.2_Repair_Firmware_FULL_4Files.zip)
2- after flashing the phone will dead (Black screen without rcovery mode or download mode or any thing). so i have insert the usb cable then remove the battery then reinsert the battery with keep pressing volume up + home button
3- you will enter the recovery mode.
4- then you have to wipe/factory reset data then reboot.
Click to expand...
Click to collapse
i9300I= dual sim
i9301i= one sim
download mod or model label under battery is not matter
if your phone dual sim flash i9300i or if one sim flash by i9301i file. just thish
Worng Firmware I9300I, right firmware is I9301I
I Have Same Problem
Please Help Me
---------- Post added at 02:15 PM ---------- Previous post was at 02:09 PM ----------
Hi
How are you?
I have flashed my phone with wrong firmware accidentally.
This the firmware i have used
I9300I
I can only go to Download mode (No recovery mode or boot)
but when i go to download mode the product name is GT-I9300I
Any help
kernel is not seandroid enforcing galaxy s3 neo I9301I
Accidentally Flash complied Firmware I9300I file
When I am Downloading Mode Their Is Product Nam : I9300I
how to flash it
Please
Help Me
Hi!
My G-935F is bricked after I downloaded the latest update. Phone is all stock with no mods at all.
Tried to flash the whole phone with Odin, witch worked. But the phone is still stuck in start screen.
I also tried to flash different roms to it but since it is a uprooted phone, that never worked. Is said something like binary 4 device 2. Also tried to flash earlier BL but the phone won't downgrade. It also complains about FRP sometimes when trying to flash different roms.
Download mode is still avalible but I am unable to get in to recovery mode.
Is the phone hardbricked or is there a solution I haven't tried?
Very greatfull for any input.
Removed
ultimatepumperx1 said:
You are fine if you have access to Download mode, just download the Stock firmware from sammobile.com since you have international version just pick your country if you are unable to find exact same country firmware try like germany one but there might be firmware for example Nordic countries and it is just g935f firmware for nordic countries and take sammmobile site and if you are example from germany then get germany version if possible you can still use your phone but you might can't use samsung pay with different country firmware not sure but yea. I guess you are finnish because of the end of your name "lainen" im too
Click to expand...
Click to collapse
That is what I have done all ready. Several times. And there are no problems with the flashing process what so ever. But the phone won't continue to boot beyond the first start-up screen. It is stuck in the first logo that appears when I start the phone.
No I'm actually from Sweden. But neighbours then!
ultimatepumperx1 said:
Hmm, seems strange what we know that your phone isn't hard bricked. Try this
if you are unable to view it i can explain it here so flash whatever country' firmware i recommend your own which is this case sweden so put everything in the odin remember to put CSC instead of HOME_CSC then boot to recovery mode(VOLUME UP+HOME+POWER) hold until you see updating then you should see no command then just wait few seconds to let it think:highfive: think then go vol down to factory reset then power again vol down to the yes! then power again and then go boot to the system using power button and cross fingers!
Click to expand...
Click to collapse
Bro his frp lock is enabled so he can't factory reset it and flashing stock rom succeeds but no boot up. Also unable to flash twrp recovery or boot in normal recovery. We've been looking for a solution but so far no luck
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
The problem is that I can't get in to recovery mode. If I Could, then I guess there wouldn't be a problem to get the phone up and running. But since I can't, there Is a bigger problem.
Yesterday, when trying different solutions. I tried to get in to recovery mode after a total flash. And then I booted in to a blue screen with the droid on it, and the text underneath it that was saying "erasing".
That was the only change I seen since the phone got bricked. Even if the system erased itself, and I did a total flash afterwards, the system won't boot, and I still can't get in to recovery mode.
Hi, I'm getting exactly the same issue here, almost tried everything, frp lock is enabled i can't acces to recovery menu and i'm unable to flash TWRP, frp lock blocked everything, i can just access to download mode
Please, I need some help with my SM-G9350 Hong-Kong Galaxy S7 edge on Binary 4
I got custom binary blocked by frp lock on SM-G9350 HK Hong-Kong Galaxy S7 edge, and then I flashed stock firmware via Odin and all was just fine and Odin succeed pass, but when installing system updates in recovery it was up to 32% then erasing and then it should boot up system, but it didn't it keeps rebooting to recovery with no options at all, just showing the android guy with no command below and then when I hard it to enter in recovery menu it shows a black screen with some lines that says couldn't open recovery cause unknown and no such file directory, and device is busy, and keep doing the same thing, I did same and flashed again with latest firmware but same thing happened, and then I tried to flash TWRP in order to flash a custom rom but Odin fails and says in download mode custom binary recovery blocked by frp lock, known that my device's bootloader is already unlocked and I flashed before this a whole of stuff, now, I can just access to download mode, otherwise I can't do anything else even no adb , there is no a combination file for the Hong-Kong variant G9350ZH, there is only for the Open-China variant G9350ZC which is not combatible with the device, even there are no adb enabled files, if someone has a solution for this, please kindly take care of this problem
THIS IS REALLY IMPORTANT: I watched too many videos on YouTube and in conclusion flashing stock firmware is enough to get rid of many issues including the frp lock, so, here there are two different S7 edge devices with two different processors and both got the same and exact problem with latest stock rom, what Samsung done with latest firmwares of the Galaxy S7 edge, they made a lot of new devices running pie, and S7 should be old according to them while a lot of S7 users are waiting for a Pie OneUI update, I got some problems earlier but flashing the Old CRH1 solved the issues and now with their latest firmwares all bricks up
Here's what it says in recovery .. attached below, with no usual selection menu at all
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
Click to expand...
Click to collapse
I am trying to get adb to work. I dont know how it works but as soon as i open the ADB.EXE file,
the cmd flashes up really quick, with a lot of text in it, just to dissapear again.
I cant get it to stay to type in any commands. The phone, when i am
opening ADB.EXE, is plugged in and in download mode. Is it anything i am doing wrong
or is the phones firmware so corrupt so it doesent recognise it?
And does really ADB work on a phone where debuggning mode is untouched?
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
then you have installed wrong firmware make sure to get latest firmware and install it with latest odin.
Latest odin: https://odindownload.com/
and Latest Firmware from https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G9350/
make sure to put your country if possible or what it came with,
Click to expand...
Click to collapse
I'm using the right firmware from sammobile and right latest odin, if it was not the right firmware Odin will never let me flash at all, and it is the country that it came with, unfortunately
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
gupt07ash said:
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
Click to expand...
Click to collapse
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
ultimatepumperx1 said:
No adb doesn't work but fastboot does which comes in the same folder so what you need to open cmd in the adb.exe file it is normal to flash if you do it like that but you have to navigate to the adb folder and then type fastboot reboot recovery what is basicly does is that it tells fastboot.exe to reboot recovery and this code won't work but you will understand what i mean so "fastboot.exe reboot recovery" don't put ".exe" and it will work like i said before.
Click to expand...
Click to collapse
Think i got he hang of it. But when i am trying to connect to my S7, it cant find y device.
Feels like i am not beeing able to connect to the phone while in download mode.
I have a S6 that i am experimenting with by the side, that is working. Abd are not able to connect
this device either when in download mode. Maybe there is another way around it with this program?
Dampalainen said:
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
Click to expand...
Click to collapse
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
gupt07ash said:
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
Click to expand...
Click to collapse
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Dampalainen said:
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Click to expand...
Click to collapse
Yes ofcourse
Is it the firmware you flashed?
gupt07ash said:
Is it the firmware you flashed?
Click to expand...
Click to collapse
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Dampalainen said:
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Click to expand...
Click to collapse
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
gupt07ash said:
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
Click to expand...
Click to collapse
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Dampalainen said:
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Click to expand...
Click to collapse
Yes all the latest firmwares from different regions. Surely something should work
If you do fail, dm a developer. They might have a good solution.
http://forum.gsmhosting.com/vbb/f162/gsm-flasher-frp-reactivation-lock-remover-pro-2200193/
...
https://www.s7fanclub.com/gsm-flasher-pro-frp-tool-for-windows-pc-to-bypass-samsung-frp-lock.html
ultimatepumperx1 said:
I would try smart switch if it will get your recovery working but try everything
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Trying to unlock frp via download mode is last thing you should do, myself i would just find a way to get recovery working.
---------- Post added at 06:33 PM ---------- Previous post was at 06:31 PM ----------
i think your partitions are ****ed up somehow. i think there is way to restore them.
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
have you tried flashing bl with pit file only or ap with pit file only,
---------- Post added at 06:37 PM ---------- Previous post was at 06:35 PM ----------
because pit file stands Partition Information Table (PIT) it might work.
Click to expand...
Click to collapse
I'm having the same and exact problem, nothing worked it sucks up, tried pit fle and even with some cracked boxes to reset frp but nothing worked