when trying to root and accessing download mode,
I get a message Secure Booting error (attached) and then device turn off
. please advice how to root the device!
Plzz help!!!
I got this as well after trying to downgrade from LP to KK using D802_PATCH_RETURN_KK_droidth.zip
I did the mistake of rebooting instead of choosing reboot to recovery.
I've tried both lg flash tool 2014 (which just sits and tells me to enter the cable) - Tried both Normal and CSE mode - Phone identify tool does not identify anything at all.)
and lg flash tool which fails on this part http://puu.sh/iI3O9/9a9d223599.png
Phone can be booted into download mode which also has a message at the bottom 'B54 rooted'
But I'm not able to use adb, nor any of the flash tools. Any help from this point would be great, I'm out of ideas.
---------- Post added at 10:05 AM ---------- Previous post was at 09:58 AM ----------
Update: I'm able to reach TWRP through the Vol down + power input. What needs to be installed other than the D802_PATCH_RETURN_KK_droidth.zip for everything to return to KK?
---------- Post added at 10:11 AM ---------- Previous post was at 10:05 AM ----------
Update #2
Flashing the KK ROM of my choice worked, I'm back, 2 hours later...
after you have returned to KK, are you able to root phone?
korensegev said:
after you have returned to KK, are you able to root phone?
Click to expand...
Click to collapse
I never lost it as it seems. As mentioned mine said (rooted) in download mode. And TWRP had full access to system, was just a matter of the baseband/bootloader/rom combo to pass all tests I guess.
Are you able to access the factory reset mode? From there it should forward you to TWRP (or at least it did for me)
It came to TWRP and then reboot phone after a few seconds without I even touched it.
Hi all, not sure did i put this in right section, if i didn't sorry for that
I'm new to this and i made mistake, i hope You can help me with this
I read this tutorial [How-To] Root G870AUCU1ANG3 (GS5 Active) and flashed kernel in BL mode, i should flash it in AP mode... i didn't saw that
Flash was successful phone rebooted, and on "samsung galaxy s5" page in top left corner has "Set warranty bit: Kernel" after that phone reboot and it's going in recovery mode, i tried to wipe/data factory reset,
what ever i tried it put me back in recovery mode
OK, i found way to fix it when i reinstalled firmware...
Now i have one more question, from where i can download working kernel G870A_NE4_Stock_Kernel.tar.md5?
Thanks for help
Set warranty bit means you lost the warranty wen you installed the custom kernel end the kustom kernel must be the zip install with boot img file end updater script end update binary inside
---------- Post added at 01:23 PM ---------- Previous post was at 01:00 PM ----------
Tar.md5 must by official bootloader from samsung
I'm currently using Lollipop rom by mukulsoni and I want to revert back to stock Samsung rom. How can I do this? Also, after I revert back to stock how can I unroot my phone. Thanks in advance.
You Should have PC
download Odin tool (this flash Stock frimware on ur mobile)
and u should download Stock Frimware file
...
---------- Post added at 06:25 PM ---------- Previous post was at 06:17 PM ----------
Mo7aMMaD 3Li said:
You Should have PC
download Odin tool (this flash Stock frimware on ur mobile)
and u should download Stock Frimware file
...
Click to expand...
Click to collapse
Now run odin on your computer
and on the Right there is a Button " AP " Or "PDA"
Click on it and choose your stock frimware file which stored on computer
Its extension is (.md5 or Tar)
Now after waiting for the app to process the file
.You should put your mobile on Downloading mode
(Power off then press volume down key while pressing power on)
then connect ur mobile to computer
you should notice that odin app discovers ur mobile)
on the left side of the app there is options (you should tick
auto reboot and F.time....)
then press start.....
wait ... and every thing :laugh:
Mo7aMMaD 3Li said:
You Should have PC
download Odin tool (this flash Stock frimware on ur mobile)
and u should download Stock Frimware file
...
---------- Post added at 06:25 PM ---------- Previous post was at 06:17 PM ----------
Now run odin on your computer
and on the Right there is a Button " AP " Or "PDA"
Click on it and choose your stock frimware file which stored on computer
Its extension is (.md5 or Tar)
Now after waiting for the app to process the file
.You should put your mobile on Downloading mode
(Power off then press volume down key while pressing power on)
then connect ur mobile to computer
you should notice that odin app discovers ur mobile)
on the left side of the app there is options (you should tick
auto reboot and F.time....)
then press start.....
wait ... and every thing :laugh:
Click to expand...
Click to collapse
MOBILE ODIN NOT supported on G2
Use PC ODIN
Mo7aMMaD 3Li said:
You Should have PC
download Odin tool (this flash Stock frimware on ur mobile)
and u should download Stock Frimware file
...
---------- Post added at 06:25 PM ---------- Previous post was at 06:17 PM ----------
Now run odin on your computer
and on the Right there is a Button " AP " Or "PDA"
Click on it and choose your stock frimware file which stored on computer
Its extension is (.md5 or Tar)
Now after waiting for the app to process the file
.You should put your mobile on Downloading mode
(Power off then press volume down key while pressing power on)
then connect ur mobile to computer
you should notice that odin app discovers ur mobile)
on the left side of the app there is options (you should tick
auto reboot and F.time....)
then press start.....
wait ... and every thing :laugh:
Click to expand...
Click to collapse
Thanks.
STORMING BLOOD17 said:
MOBILE ODIN NOT supported on G2
Use PC ODIN
Click to expand...
Click to collapse
In the first reply i said to him that he should have PC
---------- Post added at 08:28 AM ---------- Previous post was at 08:27 AM ----------
rv5750 said:
Thanks.
Click to expand...
Click to collapse
Welcome :good::victory:
use odin
rv5750 said:
I'm currently using Lollipop rom by mukulsoni and I want to revert back to stock Samsung rom. How can I do this? Also, after I revert back to stock how can I unroot my phone. Thanks in advance.
Click to expand...
Click to collapse
Use odin bro Download from here http://odindownload.com
download firmware Download from here https://www.sammobile.com/firmwares/database/SM-G7102/
Download samsung drivers from here https://samsung-usb-driver-for-mobile-phones.en.softonic.com/
Download all files then
1. install drivers
2. Run Odin then click on pda then choose firmware file then click ok
3.Completely Switch off your mobile the press volume down key+center key+switch off button at same time you should see download mode then press volume up to continue now connect your phone via pc through usb cable and wait some time odin should detect youR phone then click start and don`t touch your phone till your phone reboot automatically congress now you on samsung official stock Rom........
Sorry For my bad English
Hi!
My G-935F is bricked after I downloaded the latest update. Phone is all stock with no mods at all.
Tried to flash the whole phone with Odin, witch worked. But the phone is still stuck in start screen.
I also tried to flash different roms to it but since it is a uprooted phone, that never worked. Is said something like binary 4 device 2. Also tried to flash earlier BL but the phone won't downgrade. It also complains about FRP sometimes when trying to flash different roms.
Download mode is still avalible but I am unable to get in to recovery mode.
Is the phone hardbricked or is there a solution I haven't tried?
Very greatfull for any input.
Removed
ultimatepumperx1 said:
You are fine if you have access to Download mode, just download the Stock firmware from sammobile.com since you have international version just pick your country if you are unable to find exact same country firmware try like germany one but there might be firmware for example Nordic countries and it is just g935f firmware for nordic countries and take sammmobile site and if you are example from germany then get germany version if possible you can still use your phone but you might can't use samsung pay with different country firmware not sure but yea. I guess you are finnish because of the end of your name "lainen" im too
Click to expand...
Click to collapse
That is what I have done all ready. Several times. And there are no problems with the flashing process what so ever. But the phone won't continue to boot beyond the first start-up screen. It is stuck in the first logo that appears when I start the phone.
No I'm actually from Sweden. But neighbours then!
ultimatepumperx1 said:
Hmm, seems strange what we know that your phone isn't hard bricked. Try this
if you are unable to view it i can explain it here so flash whatever country' firmware i recommend your own which is this case sweden so put everything in the odin remember to put CSC instead of HOME_CSC then boot to recovery mode(VOLUME UP+HOME+POWER) hold until you see updating then you should see no command then just wait few seconds to let it think:highfive: think then go vol down to factory reset then power again vol down to the yes! then power again and then go boot to the system using power button and cross fingers!
Click to expand...
Click to collapse
Bro his frp lock is enabled so he can't factory reset it and flashing stock rom succeeds but no boot up. Also unable to flash twrp recovery or boot in normal recovery. We've been looking for a solution but so far no luck
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
The problem is that I can't get in to recovery mode. If I Could, then I guess there wouldn't be a problem to get the phone up and running. But since I can't, there Is a bigger problem.
Yesterday, when trying different solutions. I tried to get in to recovery mode after a total flash. And then I booted in to a blue screen with the droid on it, and the text underneath it that was saying "erasing".
That was the only change I seen since the phone got bricked. Even if the system erased itself, and I did a total flash afterwards, the system won't boot, and I still can't get in to recovery mode.
Hi, I'm getting exactly the same issue here, almost tried everything, frp lock is enabled i can't acces to recovery menu and i'm unable to flash TWRP, frp lock blocked everything, i can just access to download mode
Please, I need some help with my SM-G9350 Hong-Kong Galaxy S7 edge on Binary 4
I got custom binary blocked by frp lock on SM-G9350 HK Hong-Kong Galaxy S7 edge, and then I flashed stock firmware via Odin and all was just fine and Odin succeed pass, but when installing system updates in recovery it was up to 32% then erasing and then it should boot up system, but it didn't it keeps rebooting to recovery with no options at all, just showing the android guy with no command below and then when I hard it to enter in recovery menu it shows a black screen with some lines that says couldn't open recovery cause unknown and no such file directory, and device is busy, and keep doing the same thing, I did same and flashed again with latest firmware but same thing happened, and then I tried to flash TWRP in order to flash a custom rom but Odin fails and says in download mode custom binary recovery blocked by frp lock, known that my device's bootloader is already unlocked and I flashed before this a whole of stuff, now, I can just access to download mode, otherwise I can't do anything else even no adb , there is no a combination file for the Hong-Kong variant G9350ZH, there is only for the Open-China variant G9350ZC which is not combatible with the device, even there are no adb enabled files, if someone has a solution for this, please kindly take care of this problem
THIS IS REALLY IMPORTANT: I watched too many videos on YouTube and in conclusion flashing stock firmware is enough to get rid of many issues including the frp lock, so, here there are two different S7 edge devices with two different processors and both got the same and exact problem with latest stock rom, what Samsung done with latest firmwares of the Galaxy S7 edge, they made a lot of new devices running pie, and S7 should be old according to them while a lot of S7 users are waiting for a Pie OneUI update, I got some problems earlier but flashing the Old CRH1 solved the issues and now with their latest firmwares all bricks up
Here's what it says in recovery .. attached below, with no usual selection menu at all
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
Click to expand...
Click to collapse
I am trying to get adb to work. I dont know how it works but as soon as i open the ADB.EXE file,
the cmd flashes up really quick, with a lot of text in it, just to dissapear again.
I cant get it to stay to type in any commands. The phone, when i am
opening ADB.EXE, is plugged in and in download mode. Is it anything i am doing wrong
or is the phones firmware so corrupt so it doesent recognise it?
And does really ADB work on a phone where debuggning mode is untouched?
ultimatepumperx1 said:
okay so you can boot to recovery if you have stock recovery there, so go to download mode and type to adb "fastboot reboot recovery" and it will boot and you will see droid maybe saying "updating or smth" then no command and let it think for atleast minute and you should be inside recovery after that or just follow vol up and power and home button like i said then just wait minute again when you see the droid.
---------- Post added at 09:25 AM ---------- Previous post was at 09:22 AM ----------
then you have installed wrong firmware make sure to get latest firmware and install it with latest odin.
Latest odin: https://odindownload.com/
and Latest Firmware from https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G9350/
make sure to put your country if possible or what it came with,
Click to expand...
Click to collapse
I'm using the right firmware from sammobile and right latest odin, if it was not the right firmware Odin will never let me flash at all, and it is the country that it came with, unfortunately
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
gupt07ash said:
So i found this file on the internet
Frp Lock disable flash with odin to ap
Maybe try this
https://www.mediafire.com/file/7du404j8hn8da9n/Exynos.tar/file
Reboot to download mode to check
I haven't tested it
Click to expand...
Click to collapse
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
ultimatepumperx1 said:
No adb doesn't work but fastboot does which comes in the same folder so what you need to open cmd in the adb.exe file it is normal to flash if you do it like that but you have to navigate to the adb folder and then type fastboot reboot recovery what is basicly does is that it tells fastboot.exe to reboot recovery and this code won't work but you will understand what i mean so "fastboot.exe reboot recovery" don't put ".exe" and it will work like i said before.
Click to expand...
Click to collapse
Think i got he hang of it. But when i am trying to connect to my S7, it cant find y device.
Feels like i am not beeing able to connect to the phone while in download mode.
I have a S6 that i am experimenting with by the side, that is working. Abd are not able to connect
this device either when in download mode. Maybe there is another way around it with this program?
Dampalainen said:
This did not do the trick! Odin fails ond i got a message in red
that said "custom binary (userdata) blocked by frp"
Im testing the other tip with ABD and fastboot. But no luck yet.
Click to expand...
Click to collapse
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
gupt07ash said:
I'm all out of ideas
Flashing stock rom always does the trick. Maybe try the one from sammobile for your country
Click to expand...
Click to collapse
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Dampalainen said:
I can try. But it feels just like there is somtething wrong with the booting process. Is everything the phone needs to boot, in the BT file that you can flash in ODIN or is there anything else? I mean, if the boot file would work properly, then i would have gotten in to recovery menu.
Click to expand...
Click to collapse
Yes ofcourse
Is it the firmware you flashed?
gupt07ash said:
Is it the firmware you flashed?
Click to expand...
Click to collapse
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Dampalainen said:
Yes! Thats the one!
Have tried some different solutions this evening and got nothing.
Even used erase NAND option along with the correct PIT file.
Read alot about it before proceeding with NAND erase.
There is no change on the phone after NAND erase.
even though i have made a total flash of the phone afterwards.
Feels like it must be a hardware issue?
Click to expand...
Click to collapse
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
ultimatepumperx1 said:
Okay, sir i know, that he can't flash twrp because of frp lock, but he actually can factory reset trough recovery system if he flashes latest stock rom he will get stock recovery whatever he does, also he has flashed many different firmwares already so i bet there must be recovery
---------- Post added at 07:08 AM ---------- Previous post was at 07:04 AM ----------
You need to factory reset your device, because you have old data of your system, sadly they are unrecoverable, but atleast you don't end up with brick
Click to expand...
Click to collapse
gupt07ash said:
Can't be a hardware issue..
Maybe the old firmware was different than what you're trying to flash. Heck if I were you, I'd try all of them stock roms until it boots up
Click to expand...
Click to collapse
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Dampalainen said:
You mean all the others with different languages?
I was downloading a Norwegian version tonight. I am going to try that one tomorrow.
But since the recovery menu is still missing, it feels like the problem would be in the BL file?
Click to expand...
Click to collapse
Yes all the latest firmwares from different regions. Surely something should work
If you do fail, dm a developer. They might have a good solution.
http://forum.gsmhosting.com/vbb/f162/gsm-flasher-frp-reactivation-lock-remover-pro-2200193/
...
https://www.s7fanclub.com/gsm-flasher-pro-frp-tool-for-windows-pc-to-bypass-samsung-frp-lock.html
ultimatepumperx1 said:
I would try smart switch if it will get your recovery working but try everything
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Trying to unlock frp via download mode is last thing you should do, myself i would just find a way to get recovery working.
---------- Post added at 06:33 PM ---------- Previous post was at 06:31 PM ----------
i think your partitions are ****ed up somehow. i think there is way to restore them.
---------- Post added at 06:35 PM ---------- Previous post was at 06:33 PM ----------
have you tried flashing bl with pit file only or ap with pit file only,
---------- Post added at 06:37 PM ---------- Previous post was at 06:35 PM ----------
because pit file stands Partition Information Table (PIT) it might work.
Click to expand...
Click to collapse
I'm having the same and exact problem, nothing worked it sucks up, tried pit fle and even with some cracked boxes to reset frp but nothing worked