Related
Hi guys,
I know how rooting and flashing works but I've been using HTC devices since the nexus one so there are some differences I just want to make sure of. I got my 6P yesterday, I unlocked the bootloader and flashed TWRP. I wanted to gain root but Im not sure about flashing the modified boot img and the vendor thing.
My build was K but I got an OTA before unlocking the bootloader which updated to L. Anyway I don't know why I just formatted every thing in TWRP instead of the factory reset and I lost the OS X_X I tried to restore my nandroid with no luck. Anyway I got the factory img (MDB08L) from google dev and flashed used 'flash-all.bat' in the bootloader, the phone is running fine right now but I would like to update to the latest firmware 6.0.1+root since im not getting any OTA.
I would like to install CleanCore(6.0.1), the guide is
-> Flash Bootloader & Radio (as needed)
-> Flash CleanCore
-> Flash Modified Boot (named angler-xxxxxx-boot.zip)
-> Flash SuperSU or SuperSU Beta
-> Flash latest vendor.img (ROM & Vendor builds need to match!)
1. Should I use MMB29M factory img and flash 'flash-all.bat' like I did with the L build for the first step? then I flash new recovery?
-Flashing the rom through the recovery
2. so after I flash the rom I boot into the bootloader and flash the modified boot img with fastboot flash boot boot.img right?
3. then I go back to recovery and flash SU which I should download before.
4. vendor img is flashed in recovery too or fastboot?
Sorry for the hassle I just want to make sure.
One more thing, in this guide http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 at step 9, OP flashes the factroy img files separately (bootloader,radio,etc), is there a problem with using flashall.bat?
Thanks in advance and sorry for my noobish questions.
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Enddo said:
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Click to expand...
Click to collapse
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
mr.dj26 said:
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
Click to expand...
Click to collapse
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Enddo said:
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Click to expand...
Click to collapse
Thanks for the info
Hi everyone,
After my A700YD upgrade to android 5.0.2, I cannot find a feasible solution to root my phone. I have tried the CF root or TWRP recovery of other A700 model but my phone stuck at samsung logo after reboot. Could anyone help me to root my A700YD? Many thanks.
dropbox.com/s/vfcms69qfn0vziq/BL_A700YDZSU1BOL4.tar.md5?dl=0
dropbox.com/s/phmabycaq9d5dm0/recovery.img?dl=0
Could anyone help? You can find the BL and recovery in the above links. New users cannot post link, sorry
Anyone can help?
Install twrp then use supersu v2.65
ashyx said:
Install twrp then use supersu v2.65
Click to expand...
Click to collapse
I have tried some twrp recovery. It can enter the recovery successfully but it cannot boot normally. It stuck at samsung logo.
ashyx said:
Install twrp then use supersu v2.65
Click to expand...
Click to collapse
I've tried to dig more in it, and what I get is
1. The only way I succeed is by using KingRoot, and the method it's using is by exploiting and keeping a daemon background and the su file for calling the daemon. So that means after reboot, root is lost.
3. Replacing KingRoot with SuperSU's su file will lead to a bootloop, same as goes to installing zip by twrp.
4. In the bootloop, logcat shows that it is repeating a particular normal boot process
5. In the bootloop, using adb shell and typing "su" will not get into root, despite su is located in xbin.
6. Busybox functions normally.
Any ideas?
ProtoAES256 said:
3. Replacing KingRoot with SuperSU's su file will lead to a bootloop, same as goes to installing zip by twrp.
Click to expand...
Click to collapse
Incorrect, installing supersu version 2.6x> with twrp will patch the boot image to prevent bootloop on samsung devices.
ashyx said:
Incorrect, installing supersu version 2.6x> with twrp will patch the boot image to prevent bootloop on samsung devices.
Click to expand...
Click to collapse
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
ProtoAES256 said:
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
Click to expand...
Click to collapse
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
pianman said:
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
Click to expand...
Click to collapse
From my current experience, no. The sad thing is I'm not skilled enough to do it myself, and seemly there is no reason that skilled devs are willing to have a head in to this not-quite-popular device.
Btw, you need to format /system partition before you flash the kitkat(well, maybe it works maybe it don't, it's just my experience.)
ProtoAES256 said:
Whether or not the patch applies, it will still stuck in bootloop.
Same thing occured on current BETA supersu
Click to expand...
Click to collapse
Nope, it will only do that if you attempt to replace Kingroot with supersu.
If you apply supersu to a clean stock boot and system partition it shouldn't boot loop.
---------- Post added at 10:16 AM ---------- Previous post was at 10:11 AM ----------
pianman said:
Hi, I'm very interesting to this discussion, because yesterday my a700yd update to lollipop, then I root it with king root, but many app eg. leandroind not function with kingroot, so I use kingroot remove script but i'm occurred in bootloop, so I reflash original kitkat firmware but the phone does'nt work correctly, so I reflash lollipop firmware and all work perfectly. Now I would ask you if there is a functionally root method for a700yd?
Ps:when I do a wipe data in recovery mode, I have an error: E:can't mount /preload.
Click to expand...
Click to collapse
If you have twrp installed I will upload a modified version of SuperSU which will allow systemless root on 5.0.2.
This will patch the boot image and should prevent a bootloop.
ashyx said:
Nope, it will only do that if you attempt to replace Kingroot with supersu.
If you apply supersu to a clean stock boot and system partition it shouldn't boot loop.
Click to expand...
Click to collapse
Weird, I did format my /system, /data and /cache before pushing in stock rom and supersu...
Isn't it sufficient to remove KingRoot?
Edit:
Or did I just messed up something?
ProtoAES256 said:
Weird, I did format my /system, /data and /cache before pushing in stock rom and supersu...
Isn't it sufficient to remove KingRoot?
Edit:
Or did I just messed up something?
Click to expand...
Click to collapse
If you flashed the stock rom that should remove the Kingroot and Super su binaries.
Are you using a stock kernel?
Usually only 5.1.1 and 6.0> need a patched boot.img as Samsung don't use root protection on 5.0.2 firmware.
However never say never and Samsung may may now be using root prevention in the later 5.0.2 kernels.
This means that a patched boot image is required to circumvent Samsung's root prevention.
If you have the boot.img I can patch it manually.
ashyx said:
If you flashed the stock rom that should remove the Kingroot and Super su binaries.
Are you using a stock kernel?
Usually only 5.1.1 and 6.0> need a patched boot.img as Samsung don't use root protection on 5.0.2 firmware.
However never say never and Samsung may may now be using root prevention in the later 5.0.2 kernels.
This means that a patched boot image is required to circumvent Samsung's root prevention.
If you have the boot.img I can patch it manually.
Click to expand...
Click to collapse
here you go, extracted from A700YDZSU1BOL4_A700YDZZT1BOL4_A700YDZSU1BOL4_HOME.tar
https://mega.nz/#!14IE3YoA!mRAhQSJCgZ53r5teACeJGWMwrftIY0g0GvZM0LMX9Kg
Hi everyone!
I found this two files, they are recovery.img and supersu 2.46. I still haven't tested them, because recovery is in img format and it has only the Chinese language. If anyone can help me translate the recovery and convert it in tar.md5 format. I found this 2 files on a700yd chinese forum. Thanks!
Same device platform. So should be compatible.
http://forum.xda-developers.com/samsung-a-series/general/recovery-twrp-galaxy-a7-t3153369
ashyx said:
Same device platform. So should be compatible.
http://forum.xda-developers.com/samsung-a-series/general/recovery-twrp-galaxy-a7-t3153369
Click to expand...
Click to collapse
I wiped my phone again and tried it
Here's my procedure
Wipe everything excluding external storage
reboot to bootloader and odin in stock rom
reboot to bootloader again and odin in twrp
reboot to recovery
twrp pops up patch notification(agrees and applied)
install SuperSU 2.65(stable) via sideload
reboot into system
Bootloop. ):
What does not cause bootloop
Stock ROM
TWRP installed only with stock ROM
What causes bootloop
installing SuperSU just after TWRP install (via zip or sideload)
Other problems
installing SuperSU from TWRP built-in will cause a recovery loop(unable to get past recovery screen)
=========
the recovery works good! (a good news at least)
ProtoAES256 said:
I wiped my phone again and tried it
Here's my procedure
Wipe everything excluding external storage
reboot to bootloader and odin in stock rom
reboot to bootloader again and odin in twrp
reboot to recovery
twrp pops up patch notification(agrees and applied)
install SuperSU 2.65(stable) via sideload
reboot into system
Bootloop. ):
What does not cause bootloop
Stock ROM
TWRP installed only with stock ROM
What causes bootloop
installing SuperSU just after TWRP install (via zip or sideload)
Other problems
installing SuperSU from TWRP built-in will cause a recovery loop(unable to get past recovery screen)
=========
the recovery works good! (a good news at least)
Click to expand...
Click to collapse
Try the supersu version above.
ashyx said:
Try the supersu version above.
Click to expand...
Click to collapse
i just update myphone to new firmware. i see something new eg : About device > "android security patch level"
i have same prolem (myphone boot stuck after flash superuser.zip v2.62-2.72 via twrp). And i try reflash one old boot.img via odin then myphone boot up normally with superuser.
i think the new boot.img make myphone stuck.
Can you please help me patch the new boot.img !?
ps: i'm so sorry for my bad english
https://drive.google.com/folderview?id=0B7uFmNBw-G1QalBCZERkeUpjd0U&usp=sharing
Hi Guys!
I ask you if someone used cf-auto root on this device and it was able to root the phone? Thanks.
hkopenh17071 said:
Hi everyone,
After my A700YD upgrade to android 5.0.2, I cannot find a feasible solution to root my phone. I have tried the CF root or TWRP recovery of other A700 model but my phone stuck at samsung logo after reboot. Could anyone help me to root my A700YD? Many thanks.
dropbox.com/s/vfcms69qfn0vziq/BL_A700YDZSU1BOL4.tar.md5?dl=0
dropbox.com/s/phmabycaq9d5dm0/recovery.img?dl=0
Could anyone help? You can find the BL and recovery in the above links. New users cannot post link, sorry
Click to expand...
Click to collapse
http://forum.xda-developers.com/samsung-a-series/development/galaxy-series-cf-auto-root-t3280406
So I just updated to the latest xt1644 Nougat JP25.93.14-4 and am having an issue installing TWRP and getting it to stick. I installed it and even did a backup, but once I boot to System and then back to bootloader, and finally to recovery, it goes back to stock recovery. Also I am unsure of how to root this device now with Nougat. I've seen on a few sites differing methods. One site had a download for what they called a root package and it was a SuperSU 2.76 version. Another site said to use Phh SU and just install TWRP and then flash Phh. I don't want to mess anything up, can someone point me in the right direction since it seems everything in this forum is for a device other than the XT1644. Lastly, is it possible to revert back to Marshmellow using fastboot, or is that now not possible? I have unlocked my bootloader, obviously. Thanks.
After flashing TWRP you have to manually boot to TWRP without booting to system first. For rooting you have to flash ElementalX or Vegito Kernel and then flash SuperSU v2.79 SR3 or Magisk v12
.
tywinlannister7 said:
After flashing TWRP you have to manually boot to TWRP without booting to system first. For rooting you have to flash ElementalX or Vegito Kernel and then flash SuperSU v2.79 SR3 or Magisk v12
.
Click to expand...
Click to collapse
I did manually boot it. I went back to bootloader, then choose recovery again and it goes back to TWRP. After I boot to system is when the issue occurs. If I go back to bootloader after booting to system, that is when I have the problem. Once I try to go into recovery again it goes to stack recovery. I am trying to install TWRP 3.0.2.0 Athene.
robn30 said:
I did manually boot it. I went back to bootloader, then choose recovery again and it goes back to TWRP. After I boot to system is when the issue occurs. If I go back to bootloader after booting to system, that is when I have the problem. Once I try to go into recovery again it goes to stack recovery. I am trying to install TWRP 3.0.2.0 Athene.
Click to expand...
Click to collapse
try latest twrp 3.1.0
I got it working. I had originally set it to read only and I think that was the issue. Reinstalled it and mounted system and then choose to allow modifications. It then worked. Now onto root, we will see how that goes.
Sent from my XT1575 using Tapatalk
tywinlannister7 said:
try latest twrp 3.1.0
Click to expand...
Click to collapse
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
robn30 said:
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
If you're using SuperSU v2.79 SR3 beta ( https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133), this already is configured for systemless, and if you're going for SuperSU, that's the version I recommend. Any versions below 2.79 SR3 appear to have created boot issues on Nougat (or required the echo systemless command to work).
ElementalX (1.0.4 stock is what you want) is stable and is essential for rooting. Don't try to root your device without flashing a custom kernel like ElementalX or vegito, else if you try to root the stock Nougat kernel, you'll likely trip anti-root kit/anti-rooting security (dm-verity, I recall?) and will prevent your device from booting. By flashing ElementalX or vegito, you'll bypass that security.
A useful checklist to follow is in this guide here: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918 Having a newer version of TWRP shouldn't matter (and in fact may present less issues). With step 6, you may choose to flash either magisk or SuperSU as mentioned by tywinlannister7 (I've not had experience with phh superuser, so cannot comment). If, at some point in the future, you wish to swap rooting methods, I'd suggest following the recommended unrooting procedure for your existing root manager (e.g. unrooting from the SuperSU app settings, or flashing the magisk uninstaller, check their respective pages on XDA) before changing root managers. I've used the aforementioned checklist to root a XT1642 on Nougat without issue.
As for downgrading your system to Marshmallow if you so choose, that is possible. Verify the MM firmware you need (a selection for XT1644, retus channel devices, is here https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/) and use that firmware with a guide like this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-downgrade-to-marshmallow-nougat-t3515961 If you're using fastboot rather than mfastboot, replace mfastboot in the provided script with fastboot.
EDIT - no worries @pastorbob62 - good to have another member verifying information
robn30 said:
When rooting do you still do the little systemless trick or is that already accounted for. Does the elemental X kernel play well and is it nice and stable? Thanks for the info.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
NO! NO! NO! Do not use the systemless root method. That is for Marshmallow ONLY!. You will not be able to boot into the system after trying that and you may have to go all of the way back to flashing stock from fastboot to fix it.
ElementX-G4 kernel plays well with Nougat stock. I ran it with stock Nougat for a couple of weeks on my XT1625 without any major issues. So flash it from TWRP. Be sure you have the correct version. Then boot to system to check it out. Next reboot to TWRP and flash SuperSU 2.79. Boot back to the system. It will probably boot a couple of times before the system comes up. Don't panic. You should be good to go.
Edit: Sorry echo92. I was typing my reply at the same time you were. :good:
echo92 said:
If you're using SuperSU v2.79 SR3 beta ( https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133), this already is configured for systemless, and if you're going for SuperSU, that's the version I recommend. Any versions below 2.79 SR3 appear to have created boot issues on Nougat (or required the echo systemless command to work).
ElementalX (1.0.4 stock is what you want) is stable and is essential for rooting. Don't try to root your device without flashing a custom kernel like ElementalX or vegito, else if you try to root the stock Nougat kernel, you'll likely trip anti-root kit/anti-rooting security (dm-verity, I recall?) and will prevent your device from booting. By flashing ElementalX or vegito, you'll bypass that security.
A useful checklist to follow is in this guide here: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918 Having a newer version of TWRP shouldn't matter (and in fact may present less issues). With step 6, you may choose to flash either magisk or SuperSU as mentioned by tywinlannister7 (I've not had experience with phh superuser, so cannot comment). If, at some point in the future, you wish to swap rooting methods, I'd suggest following the recommended unrooting procedure for your existing root manager (e.g. unrooting from the SuperSU app settings, or flashing the magisk uninstaller, check their respective pages on XDA) before changing root managers. I've used the aforementioned checklist to root a XT1642 on Nougat without issue.
As for downgrading your system to Marshmallow if you so choose, that is possible. Verify the MM firmware you need (a selection for XT1644, retus channel devices, is here https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/) and use that firmware with a guide like this: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-downgrade-to-marshmallow-nougat-t3515961 If you're using fastboot rather than mfastboot, replace mfastboot in the provided script with fastboot.
EDIT - no worries @pastorbob62 - good to have another member verifying information
Click to expand...
Click to collapse
Thanks for all the information, it is very much appreciated. Thanks to pastorbob62 as well. This information will be very useful.
Sent from my XT1575 using Tapatalk
pastorbob62 said:
NO! NO! NO! Do not use the systemless root method. That is for Marshmallow ONLY!. You will not be able to boot into the system after trying that and you may have to go all of the way back to flashing stock from fastboot to fix it.
ElementX-G4 kernel plays well with Nougat stock. I ran it with stock Nougat for a couple of weeks on my XT1625 without any major issues. So flash it from TWRP. Be sure you have the correct version. Then boot to system to check it out. Next reboot to TWRP and flash SuperSU 2.79. Boot back to the system. It will probably boot a couple of times before the system comes up. Don't panic. You should be good to go.
Edit: Sorry echo92. I was typing my reply at the same time you were. :good:
Click to expand...
Click to collapse
One other thing, can I back up the stock kernel? Or at least find it somewhere for download. Is this something I can backup using TWRP? Thanks again.
Sent from my XT1575 using Tapatalk
robn30 said:
One other thing, can I back up the stock kernel? Or at least find it somewhere for download. Is this something I can backup using TWRP? Thanks again.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Got it figured out. Backing up my boot.img via TWRP ensures my stock kernel is safe. Already installed elemental X and SuperSU and all went perfectly smooth. Thanks again for the links.
Sent from my XT1575 using Tapatalk
robn30 said:
Got it figured out. Backing up my boot.img via TWRP ensures my stock kernel is safe. Already installed elemental X and SuperSU and all went perfectly smooth. Thanks again for the links.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
You are very welcome. Glad you got it figured out and all is working well. :good:
Hey guys... I know I am late to the thread but if you see this, can you inform me how can I receive updates afterwards? I currently have twrp with elementx kernel and Magisk. And there is a security patch out for the phone. How can I install that?
1emrys1 said:
Hey guys... I know I am late to the thread but if you see this, can you inform me how can I receive updates afterwards? I currently have twrp with elementx kernel and Magisk. And there is a security patch out for the phone. How can I install that?
Click to expand...
Click to collapse
Generally you'd have to revert back to a clean stock ROM, no TWRP, no ElementalX, no magisk. The stock ROM also needs to be in a read only state (no modifications allowed in TWRP) and cannot be debloated (OEM partition needs to be untouched).
You could revert back to a TWRP backup made before you flashed ElementalX, provided you did not let TWRP make modifications. You'd also have to find a stock recovery (if you flashed TWRP), and restore a stock logo.bin as well if you flashed a custom logo.bin to hide the bootloader warning. Then, you should be able to apply OTA/security updates. Attempts to apply OTA updates with TWRP on your device will likely fail and leave you in a soft bootloop unless you boot via the bootloader. You could try this to break the bootloop: https://forum.xda-developers.com/moto-g4/help/troubleshooting-twrp-boot-loop-ota-t3714325
The easiest and safest method I've found is to re-flash the stock ROM you have. Ensure this is the same firmware as you currently have and the latest firmware that you've flashed onto your device (don't downgrade your firmware if possible). You can re-flash without erasing your data by omitting the fastboot erase userdata command. However, I would recommend you back up your device anyway (e.g. in TWRP) and any important files, as although this procedure should not affect your data with that command omitted, any firmware flash has the possibility of affecting your device stability. That may require a factory reset/device wipe to fix. Backing up your data should be standard policy when it comes to flashing anything affecting your device's system/underlying firmware.
After re-flashing the stock ROM, you should be able to apply the OTA update.
Thanks a lot for the detailed answer. I really appreciate people like you. [emoji3]
Sent from my Redmi Note 3 using Tapatalk
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.
Hi guys,
I have gone thru the forum to install Magisk systemless root in S7 Edge running 8.0 but have few questions.
1. Is TWRP mandatory to install Magisk for systemless root?
2. If above point is yes, then will the device be eligible for OTA even with TWRP recovery?
3. Please provide steps to install Magisk systemless root in S7 Edge running 8.0 latest October patch
Thanks in advance.
mpadhu said:
Hi guys,
I have gone thru the forum to install Magisk systemless root in S7 Edge running 8.0 but have few questions.
1. Is TWRP mandatory to install Magisk for systemless root?
2. If above point is yes, then will the device be eligible for OTA even with TWRP recovery?
3. Please provide steps to install Magisk systemless root in S7 Edge running 8.0 latest October patch
Thanks in advance.
Click to expand...
Click to collapse
Go Here https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-root-android-8-0-oreo-t3840271
1. U need TWRP for flashing Magisk.
2. When ur intentions are gaining root access, u should forgo OTA.
3. The above link has everything u need.
joeljose1001 said:
Go Here https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-root-android-8-0-oreo-t3840271
1. U need TWRP for flashing Magisk.
2. When ur intentions are gaining root access, u should forgo OTA.
3. The above link has everything u need.
Click to expand...
Click to collapse
Thank you for your time and response. There is something called systemless root which will hide the root from the system and also allows official OTA updates.
mpadhu said:
Thank you for your time and response. There is something called systemless root which will hide the root from the system and also allows official OTA updates.
Click to expand...
Click to collapse
From what I know, when you download an OTA and prompt your device to install it, your Android system performs a series of checksums to ensure that your /system, /boot, /recovery, and /vendor (or /OEM) partitions are unmodified from their original stock configuration.
The benefit of Magisk is that it does not modify the system partition, but while installing Magisk, the first thing it does is patch boot image. So you might have to restore the original boot image for the OTA to work.
Also, the OTA is designed to be installed via the stock recovery which has been overwritten with TWRP. So, I think u will face a problem there too.
I'm not saying that it's impossible to get an OTA update. It just might not be as easy as u r used to.
joeljose1001 said:
From what I know, when you download an OTA and prompt your device to install it, your Android system performs a series of checksums to ensure that your /system, /boot, /recovery, and /vendor (or /OEM) partitions are unmodified from their original stock configuration.
The benefit of Magisk is that it does not modify the system partition, but while installing Magisk, the first thing it does is patch boot image. So you might have to restore the original boot image for the OTA to work.
Also, the OTA is designed to be installed via the stock recovery which has been overwritten with TWRP. So, I think u will face a problem there too.
I'm not saying that it's impossible to get an OTA update. It just might not be as easy as u r used to.
Click to expand...
Click to collapse
Got your point. Thank you. I read that Magisk can be installed without root or even custom recovery.
The below is taken from the official Magisk thread https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
How to download or extract the stock boot image file from my official ROM?
"Via Magisk Manager:
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and you also have to be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/Download/patched_boot.img[.tar]
Copy the patched boot image to your PC. If you can't find it via MTP, you can pull the file with ADB:
adb pull /sdcard/Download/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Here is the command if using fastboot:
fastboot flash boot /path/to/patched_boot.img"