Related
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??
Yes ,thank you very much ,i mean emiu 4.1 please
drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .
Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:
Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....
Hi all,
i own a p9 lite that was on Nougat VNS-L31C432B381 and i decided to rollback to MM. Following Huawei website instructions I downloaded two packages (rollback package and MM) and with 3 buttons method I flash first the rollback package and then MM. All went right and the ROM was stable. After a while of testing (that's why i went to MM), I decided to upgrade to nougat again. From updater it download and install the new android version (1.25 GB). After reboot I noticed that some system app was missing (file manager first). At every reset/factory reset some system app disappear. I repeated the procedure to rollback and upgrade again with the same result. The only way to use the device was to reflash MM and don't upgrade. Here some information I found:
- my starting version was Nougat VNS-L31C432B381
- now I'm on VNS-L31C432B160 (B160 isn't for dual sim? i have the single sim version) stock recovery bootloader locked
- updater try to install VNS-L31C432B370 (instead of B371?)
- if I try upgrade throught updater SN became something like ndr90 test key
- I tried to restore data,syste,vendor,oeminfo ecc.. from backups made with TWRP in Nougat (maybe wahile i was on MM, I'm not sure). It show the correct SN but ROM was still unstable
- I thought to try install full Nougat ROM but i didn't find any package
Can someone help me?
Thank you
The B37x update that the phone automatically finds after rollback doesn't work and will take you to ndr90 test key as you found out B160 is dualsim so you should flash the 161 one. Then use this guide to update through firmwarefinder/proxy https://forum.xda-developers.com/huawei-p9lite/how-to/how-to-b388-nougat-maybe-b381-guide-t3612072
If you want to unlock your bootloader you can also flash B3xx through twrp. If not, the guide above works fine.
Mara-X said:
The B37x update that the phone automatically finds after rollback doesn't work and will take you to ndr90 test key as you found out B160 is dualsim so you should flash the 161 one. Then use this guide to update through firmwarefinder/proxy https://forum.xda-developers.com/huawei-p9lite/how-to/how-to-b388-nougat-maybe-b381-guide-t3612072
If you want to unlock your bootloader you can also flash B3xx through twrp. If not, the guide above works fine.
Click to expand...
Click to collapse
Hi Mara-X and thank you for you answer.
After I write the post i found the B161 package and i decided to give it a try. After flash (all ok) I launched updater again and it download the B371. The update went well and now i'm updating at B381 again throught updater. I think, when it was done, i'll factory reset the device for a clean install. So it seems the problem was B160/161 -single/dual version.
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 3 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
ceriqdesign said:
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 2 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
Click to expand...
Click to collapse
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
manuele16 said:
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
Click to expand...
Click to collapse
are you using HuRUpdater method?can you give me more info about your mate 8
ceriqdesign said:
are you using HuRUpdater method?can you give me more info about your mate 8
Click to expand...
Click to collapse
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
manuele16 said:
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
Click to expand...
Click to collapse
So originally you came from NXT-AL10 and without changing oeminfo with SRK Tool then you used the HuRUpdater?
Is it your bootloader still unlocked or locked?
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
I managed to get Vendor: hw and Country: eu.
but I'm still in nrd90
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
Yup no wonder you're on NRD90M..you need to change oeminfo first before flash c432 firmware..
TWRP Huawei mate 8
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
riky26 said:
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
Click to expand...
Click to collapse
Sorry for late reply as for now i'm quite busy with life..can you tell me what your model before you change to NXTL26C605B580?
Hello,
Recently a Huawei P9 lite VNS-L21 came into my hands. I experimented a bit with unofficial ROMs but eventually flashed the official back. I had flashed an earlier version, ending in 380 I believe, but because the phone attempted to upgrade to the next incremental update (say, -382) I decided to upgrade myself to the latest supported version (506). I used Firmware Finder to find the firmware and downloaded it to SD card.
Upgrade succeeded - since I had left TWRP recovery in the phone, I used the HuRUpdater which worked flawlessly.
The only small issue is that following this update, a red message is displayed on boot saying the device has failed verification.
Any way to solve this?
Sovjohn said:
Hello,
Recently a Huawei P9 lite VNS-L21 came into my hands. I experimented a bit with unofficial ROMs but eventually flashed the official back. I had flashed an earlier version, ending in 380 I believe, but because the phone attempted to upgrade to the next incremental update (say, -382) I decided to upgrade myself to the latest supported version (506). I used Firmware Finder to find the firmware and downloaded it to SD card.
Upgrade succeeded - since I had left TWRP recovery in the phone, I used the HuRUpdater which worked flawlessly.
The only small issue is that following this update, a red message is displayed on boot saying the device has failed verification.
Any way to solve this?
Click to expand...
Click to collapse
Hello,
my doubt is that you flashed a different firmware version from the one you had, thus corrupting the device's oem file. Could you post which was the latest complete firmware without this problem and the last one you downloaded and flashed? ( ex. L21CxxxB382 & LxxCxxxB506 ).
Let me know this info ...
Hi,
I went from l21c432b380 to l21c432b506 during this process. Stock OEM file was flashed before the -380 upgrade (no errors existed, the 380 upgrade followed a flash of -370).
I'm not sure why this is happening - I mean, both firmwares were from the firmware finder app... Weird, to say the least.
Sovjohn said:
Hi,
I went from l21c432b380 to l21c432b506 during this process. Stock OEM file was flashed before the -380 upgrade (no errors existed, the 380 upgrade followed a flash of -370).
I'm not sure why this is happening - I mean, both firmwares were from the firmware finder app... Weird, to say the least.
Click to expand...
Click to collapse
Yep, you used correct file but anyhow the firmware has been corrupted.
I think you have some ways to solve...
1 - if you have stock recovery, reboot into it and
download and flash the same latest firmware.
If you do not have it, you can extract (with huawei update extractor) it
(should be recovery1.img) from B506 firmware (update.zip) you already got,
then can be flashed via fastboot commands.
2 - Flash a previous or B380 firmware via HuRUpdater, then
update to latest via Firmware Finder with dns/vpn method.
3 - Repeat the whole job you done with B506 firmware. (via HuRupdater)
4 - Reboot recovery, reflash L21OEMinfo file, dual sim one, then the latest firmware again...
P.S.: method 1, 2, 4 will re-lock the bootloader, no problem if still you got the code...
Beware method 4, after you flash the oeminfo file do not shout down, reboot to bootloader
and unlock it again with the code. Device will reboot into twrp, then flash B506 firmware.
Good luck and let the community know..
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Try to install Service ROM from SD card using dload method.
Link:
https://androidhost.ru/41d
Follow instructions in file "ReleaseDoc". (Read everything carefully before doing anything).
Through this process, your data will be deleted and bootloader will be locked again.
Dload method works with Stock Recovery only, you have to install Stock Recovery first.
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Dadditz said:
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Click to expand...
Click to collapse
Please read carefully, Maestro :
"I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom."
Piece.
Hello,
I reinstalled the custom rom that I found on the net: C432B414 with Hurupdater.
It works.
However, the bootloader is still unlocked ... however, I would like to return to the factory configuration with the bootloader locked.
https://www.cjoint.com/c/JItgZO6GuGB
I have the stock recovery install :
https://www.cjoint.com/c/JItg7SqQmdB
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
toto6976 said:
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
Click to expand...
Click to collapse
Unpack downloaded .zip package, you will see two files - ReleaseDoc and Software. Open "Software" and unpack SDUpdate_Package.tar.gaz. Transfer file dload to SD card and follow instructions - there is 'Software upgrade guidline' in file ReleaseDoc.
Edit.:
You can also safely lock BL with OEMINFO flashing and rollback to A6:
-Download OEMINFO:
https://mega.nz/#!xhEwFYLZ!Sv2nB5GERB_js76sAUWxj8hQgsjnf_YPobVbtrxpCew
Transfer it to the SD Card.
Download VNS-L31C432B160 fullupdate.zip:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
Create a folder dload on your SD , unpack downloaded .zip file and copy it to the dload folder.
Install TWRP 3.1.0-2:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
using command
fastboot flash recovery2 twrp.img (OVER eRECOVERY!) , boot in TWRP, fĺash oeminfo.zip , go back to TWRP's main menu, select Reboot and Power Off. Then use three button combo and flash firmware from dload. Your phone will running A6 with locked bontloader. If you want, you can upgrade back to A7 via OTA update or using Fipmware finder.