A2017G Bricked D: DFU ONLY - ZTE Axon 7 Questions & Answers

Hi! I have flashed A2017_B13_FULL_EDL with MIFlash and now my A2017 only enter to DFU ZTE Handset Diagnostic Interface(DFU) Can you help me please? D:

Sagformas said:
Hi! I have flashed A2017_B13_FULL_EDL with MIFlash and now my A2017 only enter to DFU ZTE Handset Diagnostic Interface(DFU) Can you help me please? D:
Click to expand...
Click to collapse
Please Help

You say A2017G in the title, but A2017 in your post..
Did you flashed the A2017 B13 file to your A2017G phone?

Keiler90 said:
You say A2017G in the title, but A2017 in your post..
Did you flashed the A2017 B13 file to your A2017G phone?
Click to expand...
Click to collapse
Yes, and the phone the last time boots, but when i have flashed the fastboot unlock...my phone has died

In dfu mode you still can access the EDL mode.
Just type
adb reboot edl

SilentEYE said:
In dfu mode you still can access the EDL mode.
Just type
adb reboot edl
Click to expand...
Click to collapse
My Axon 7 only has a red led and anything more :S if i type adb devices my cmd anwser that i havent a phone connected , the screen neither work, only a red led

ZTE Handset Diagnostic Interface (DFU)

Can u try this
Turn off device
Power in with volume down and power button hold
Release power button after 3 secs
On the A2017G you should see a white box on the screen then. ADB should work

SilentEYE said:
Can u try this
Turn off device
Power in with volume down and power button hold
Release power button after 3 secs
On the A2017G you should see a white box on the screen then. ADB should work
Click to expand...
Click to collapse
I have tried it but it neither work (, only red led and DFU :'(

I have tried the nandL_firefox and i cant flash because i havent a partition file :S and dfu.exe.. neither

Related

Help I bricked my phone

I tried tenfar's rooting process and tried to do "adb reboot edl" and it shut down and doesn't respond to anything. What do I do?
Just Press and Hold Power till you see ZTE LOGO.
DrakenFX said:
Just Press and Hold Power till you see ZTE LOGO.
Click to expand...
Click to collapse
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
awsomjgp said:
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
Click to expand...
Click to collapse
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
DrakenFX said:
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
Click to expand...
Click to collapse
Thank you. I got it to boot with the twrp 3.0.2-2 and the custom boot image.

Bricked Axon 7 A2017

Hi all. I've an Axon 7 A2017 (Chinese 4/64). It's bricked but i think it is not hard one. Because notification led is working. When i try to turn phone on ZTE logo shows up and disappear. I added video. I can't use mi flash tool because i can't boot edl mode.
https://www.youtube.com/watch?v=VCUvFAFSYpo&
You should be able to get to EDL like this:
1. Power off
2. Hold both volume buttons
3. Plug device into computer
You should see device show up in EDL mode (USB 05c6:9008, Gobi Wireless Modem).
tdm said:
You should be able to get to EDL like this:
1. Power off
2. Hold both volume buttons
3. Plug device into computer
You should see device show up in EDL mode (USB 05c6:9008, Gobi Wireless Modem).
Click to expand...
Click to collapse
it is in DFU mode :crying:
WesTD said:
it is in DFU mode :crying:
Click to expand...
Click to collapse
Oh, that is unexpected. I thought only the G (Euro) models did DFU mode.
Sorry man, probably time to go ask for an RMA.
No twrp/recovery mode either? I know chinese 7.1.1 bootloader introduced dfu mode.
lafester said:
No twrp/recovery mode either? I know chinese 7.1.1 bootloader introduced dfu mode.
Click to expand...
Click to collapse
nothing. just like in video
The video doesn't show you trying.
It's a pity, but a ot of guys (including me) made that to their axon 7.
I didn't unlock the bootloader before any actions with root. And got the same bricked device.
It appears in DFU mode only. And as far as I know, there is no flashtool for Snapdragon 820 in DFU so far.
Any luck?

Chinese Axon 7 is not seen in ADB or MiFlash..Bricked??

After installing twrp on my chinese axon 7 latest B16 I rebooted accidentally and now my phone gets stuck on the the ZTE logo.
I cant enter recovery as when I press volume up + power, it reboots a couple of times with the zte logo and nothing else.
Also when entering EDL mode the only thing my PC is showing in device manager is "Handset Diagnostic Interface(DFU) (COM6)". Before it was showing as "Qualcomm HS-USB QDLoader 9008" but no more, even after multiple reboots and installing the qualcomm drivers again.
Before when running "adb devices" in the CLI I would see my device but now nothing. and running adb reboot edl shows error: no devices/emulators found.
Also tried MiFlash but when I hit refresh I dont even see COM in the list, its just blank.
Does anyone have any suggestions?
as I tried the below guide but get stuck as my device is never picked up by ADB or MiFlash
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
cozzysa said:
After installing twrp on my chinese axon 7 latest B16 I rebooted accidentally and now my phone gets stuck on the the ZTE logo.
I cant enter recovery as when I press volume up + power, it reboots a couple of times with the zte logo and nothing else.
Also when entering EDL mode the only thing my PC is showing in device manager is "Handset Diagnostic Interface(DFU) (COM6)". Before it was showing as "Qualcomm HS-USB QDLoader 9008" but no more, even after multiple reboots and installing the qualcomm drivers again.
Before when running "adb devices" in the CLI I would see my device but now nothing. and running adb reboot edl shows error: no devices/emulators found.
Also tried MiFlash but when I hit refresh I dont even see COM in the list, its just blank.
Does anyone have any suggestions?
as I tried the below guide but get stuck as my device is never picked up by ADB or MiFlash
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Yeah, DFU brick. You basically need to follow the 4th category brick repair guide. Good luck
Choose an username... said:
Yeah, DFU brick. You basically need to follow the 4th category brick repair guide. Good luck
Click to expand...
Click to collapse
wow damn..I found this guide: https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
But I see it involves me opening the device which I am trying to avoid as a last resort.
I just sent the seller from Ali-express to see if they will replace it.
Never actually told them that I was tinkering with it.
Fingers crossed on the reply, will update the thread once I receive a reply.
cozzysa said:
wow damn..I found this guide: https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
But I see it involves me opening the device which I am trying to avoid as a last resort.
I just sent the seller from Ali-express to see if they will replace it.
Never actually told them that I was tinkering with it.
Fingers crossed on the reply, will update the thread once I receive a reply.
Click to expand...
Click to collapse
well that's the other way lol
I had to follow the guide, and it fixed my phone, so be assured that you can fix it if they send it back
It seems I got really luck as putting my phone in Factory test mode made device manager finally show "Qualcomm HS-USB QDLoader 9008" which I was then led MiFlash in detecting it.
I was then able to flash Stock B13 and from there unlock the bootloader, flash twrp and root.
cozzysa said:
It seems I got really luck as putting my phone in Factory test mode made device manager finally show "Qualcomm HS-USB QDLoader 9008" which I was then led MiFlash in detecting it.
I was then able to flash Stock B13 and from there unlock the bootloader, flash twrp and root.
Click to expand...
Click to collapse
Usually you can't enter Factory Test Mode when on a DFU brick. The known procedure to do that is to discharge the phone, then put it into FTM somehow and then using ADB to get to EDL. It's really weird that you've been able to pull that off that way
Could you tell us how you got into FTM? Just by vol down and power? It would be a nice addition to the brick guide, before attempting to take the phone apart
Yeah, it was just by power + volume down.

ZTE Axon 7 (A2017G) Stucks on ZTE logo

Hello I have a ZTE smartphone and I rooted it and unlocked the Bootloader.
Then i wanted to update it and locked the bootloader.
Now it shows only the ZTE logo if i turn it on.
And i cant enter EDL mode with the buttons.
What should i do?
sorry for my bad english
Tried wipe?
UltraBackfisch said:
Hello I have a ZTE smartphone and I rooted it and unlocked the Bootloader.
Then i wanted to update it and locked the bootloader.
Now it shows only the ZTE logo if i turn it on.
And i cant enter EDL mode with the buttons.
What should i do?
sorry for my bad english
Click to expand...
Click to collapse
You bricked it. Which guide did you use?? All of them tell you not to do this dumb crap ?
You didn't have to lock in order to update... Just downloading a flashable for your phone model would have been enough
You'll have to enter DFU at least. What happens when you hold both Vol+ and Vol- and insert the cable (other end on the PC of course)? If a red LED turns on, then you are on DFU. Open device manager and tell me what you see under Ports (COM & LPT). If it is DFU then you can use MultiDL to enter EDL, then an EDL package to fix your mess
Choose an username... said:
You bricked it. Which guide did you use?? All of them tell you not to do this dumb crap
You didn't have to lock in order to update... Just downloading a flashable for your phone model would have been enough
You'll have to enter DFU at least. What happens when you hold both Vol+ and Vol- and insert the cable (other end on the PC of course)? If a red LED turns on, then you are on DFU. Open device manager and tell me what you see under Ports (COM & LPT). If it is DFU then you can use MultiDL to enter EDL, then an EDL package to fix your mess
Click to expand...
Click to collapse
I pressed the Vol buttons and insert the cable and the LLD turns on but it dont react and in my device manager there is nothing exept my PC disks
UltraBackfisch said:
I pressed the Vol buttons and insert the cable and the LLD turns on but it dont react and in my device manager there is nothing exept my PC disks
Click to expand...
Click to collapse
your pc disks? Lmao
You have to open the Ports (COM & LPT) tab
The phone won't react at all when it is in DFU, that's fine. Download MultiDL and follow the guide on how to use it. It's in this forum
Choose an username... said:
your pc disks? Lmao
You have to open the Ports (COM & LPT) tab
The phone won't react at all when it is in DFU, that's fine. Download MultiDL and follow the guide on how to use it. It's in this forum
Click to expand...
Click to collapse
Can you send me the link?
@UltraBackfisch: Can you use the forum search function?
AnonVendetta said:
@UltraBackfisch: Can you use the forum search function?
Click to expand...
Click to collapse
Sorry i dont know how.
But i know i want that my ZTE works fine
Choose an username... said:
your pc disks? Lmao
You have to open the Ports (COM & LPT) tab
The phone won't react at all when it is in DFU, that's fine. Download MultiDL and follow the guide on how to use it. It's in this forum
Click to expand...
Click to collapse
Ok i Did what you said but in the Tool i cant see anything.
Connect state: Disconected
@UltraBackfisch: Near the top of almost every page on XDA it says "Search forum" and "Search thread".....use it.....it's kinda like searching Google.
It's normal for the DFU MultiDL tool to say disconnected. Did you read the instructions? The only point of this tool is to get your device into EDL, then you can use MiFlash or Axon 7 EDL Tool to flash.

[SOLVED!] Hard Bricked 6T Help Pls

Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
You must post in Q/A not here
Tapatalké depuis mon OnePlus 6T Havoc OS avec FP !
What were u exactly trying to do while this happened ?
Extreme_Ninja2099 said:
Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
Click to expand...
Click to collapse
You can restore you device using fastboot rom. Search for oos 6t fastboot rom.. There are guides for installation.
P.S. It will give a whole bunch of error in the cmd during installation but don't interrupt the process as your device will be restored in the end
Use Mnm tool to fix your phone. It can fix hard brick devices and guidance is there how to use .
PS: this is not right place post next time post on Q/A section.
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
parker.stephens said:
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
Click to expand...
Click to collapse
Hold down every button till it shuts off, then force reboot to bootloader, then select power off to make sure it's off. Then do as I instructed above to fix it. Sometimes u can just run a fastboot rom to fix it, or boot twrp and flash a rom. I do this multiple times a day sometimes.
fullofhell said:
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Click to expand...
Click to collapse
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Extreme_Ninja2099 said:
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Click to expand...
Click to collapse
Everybody, it's called the MSMDownload Tool. It cannot be used in Fastboot Mode or Qualcomm CrashDump Mode, it can only be used in EDL Mode (Emergency Download Mode).
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
CaptionNixx said:
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
Click to expand...
Click to collapse
Power off use msm. Done.
fullofhell said:
Power off use msm. Done.
Click to expand...
Click to collapse
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
CaptionNixx said:
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
Click to expand...
Click to collapse
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Extreme_Ninja2099 said:
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Click to expand...
Click to collapse
Yes i did that and driver is fully installed Qualcomm HS-USB QDloader 9008 and there is No yallow sigh in driver
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Extreme_Ninja2099 said:
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Click to expand...
Click to collapse
Thanks brother its done
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Voldemort13 said:
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Click to expand...
Click to collapse
did yoy got any solution

Categories

Resources