Database Users

Phone only boots into TWRP

I decided today to try and root my phone and followed the steps on this tutorial: http://forum.xda-developers.com/nexus-4/general/nexus-4-guide-unlock-bootloader-root-t2266654
I had unlocked my phone and installed the latest version of TWRP. Now I can only boot into TWRP and bootloader. My phone is not being picked up by my PC. I tried a factory reset and format of data on TWRP but my phone still only boots into TWRP.
Is my phone permanently bricked?
Any help will be greatly appreciated

I actually have just made some progress now. I've managed to get the phone connected to the computer by going into ADB sideload and installing the ADB drivers again on my computer.
Typing ADB devices in CMD now shows my device as connected.
Any advice on what I should do now?

What happens when you try to boot it normally? Is it stuck at the boot animation or does it go directly to the bootloader or recovery? Since you already had to wipe everything you could try flashing a factory image via fastboot.

theminikiller said:
What happens when you try to boot it normally? Is it stuck at the boot animation or does it go directly to the bootloader or recovery? Since you already had to wipe everything you could try flashing a factory image via fastboot.
Click to expand...
Click to collapse
Booting the phone normally loads it into TWRP. Booting the phone with the volume key pressed down loads the bootloader. I think I may have just wiped the OS present on the Phone.
I want my phone to be rooted running CyanogenMOD (phone is currently unrooted). Should I first install a stock rom then root by installing SuperSU and CyanogenMOD or can I just skip installing a stock rom and install SuperSU and CyanogenMOD?
Thanks for the help

You could try flashing a cyanogenmod zip from TWRP, and if that doesn't work I would suggest flashing I factory image.

theminikiller said:
You could try flashing a cyanogenmod zip from TWRP, and if that doesn't work I would suggest flashing I factory image.
Click to expand...
Click to collapse
But my phone is not rooted yet. Can I install SuperSU by copying onto my phone and installing it through TWRP?

umair_ said:
But my phone is not rooted yet. Can I install SuperSU by copying onto my phone and installing it through TWRP?
Click to expand...
Click to collapse
Yes, if it is a zip file. But I'm pretty sure installing cyanogenmod will automatically root it for you.

theminikiller said:
Yes, if it is a zip file. But I'm pretty sure installing cyanogenmod will automatically root it for you.
Click to expand...
Click to collapse
I installed SuperSU then CyanogenMOD and lastly GApps. It still only boots into TWRP and it doesn't look like there has been any files added to the phone's storage. Should I first flash a stock rom and then try to install CyanogenMOD?

umair_ said:
I installed SuperSU then CyanogenMOD and lastly GApps. It still only boots into TWRP and it doesn't look like there has been any files added to the phone's storage. Should I first flash a stock rom and then try to install CyanogenMOD?
Click to expand...
Click to collapse
Yes, try flashing a factory image. If it boots then you could try flashing cyanogenmod.
EDIT: here is a guide on how to flash a factory image: http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312

theminikiller said:
Yes, try flashing a factory image. If it boots then you could try flashing cyanogenmod.
EDIT: here is a guide on how to flash a factory image: http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
Click to expand...
Click to collapse
I've managed to get it all working by first flashing the stock ROM and starting all over again.
Thanks for your help.

Is there a workaround to this other than flashing factory images...?

hwweiler said:
Is there a workaround to this other than flashing factory images...?
Click to expand...
Click to collapse
@hwweiler, No friend there is no other way.Please before do this as is one direction way take the pain to look on my post #180 on zaclmon's thread http://forum.xda-developers.com/nexus-4/orig-development/wip-aosp-7-0-nougat-t3448444/page18 and keep in mind that is impossible to return back on any nandroid backup u kept e.g to 5.1.1 or M furthermore its also impossible to flash any rom zip if u use this N (WIP) rom,the only way to have a workable phone again is to flash the stock rom from scratch.Exceperienced with and never again untill we have the appropriate solution..The twrp used and i still use on M is TWRP 3.0.2.0.The possibility to return on LP ffrom M and reverse still exists but not when u flash this rom.
Regards,Christos

Lack of recovery

Hey guys, I'm a longtime XDA browser but hardly ever post. I have the MXPE rooted with the newest TWRP build and has been running great since I got it. last night flashed the Deodexed 6.0 build from AICPs 5.1.1. I had some issues with the SD card being mounted as internal storage and erasing something so I tried to flash back to stock as my nandroids weren't seen as usable.
Long story short when I flashed back to stock, the recovery would never take. I've flashed the stock recovery and twrp to no avail. For some reason it wont actually stick. Everything else is back to stock but that. When I used the win toolkit and tried to flash twrp again it said something about the folder locations so I'm wondering if I messed something in the partitions.
Question is, have you guys ran into this issue or have any insight on where to go from here? I've looked around but I couldn't find a post that the same as this issue. As a side note, I can get into the bootloader just fine.
I appreciate any info that someone can provide.

Flash twrp. Reboot back to recovery from recovery. Reboot system.
Hopefully it's that easy. Stock os flashes stock recovery on boot. Rebooting recovery from recovery prevents that from happening.
From TWRP:
"Note many devices will replace your custom recovery automatically during first boot.... Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
mxpe 6.0

Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?

THEFILLTER said:
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
Click to expand...
Click to collapse
I'm sorry I didn't see this sooner. Flash recovery with fastboot. Boot into recovery. From reboot menu in recovery, select reboot recovery. Twrp will patch so recovery isn't lost again.
mxpe 6.0

That did it. thanks alot ffejy462!

Stuck in bootloop in all LOS and OOS based roms

Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?

Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.

Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.

I have now also tried flashing the stock boot.img, but no difference.

I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work

"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?

After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.

Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.

If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead

It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?

Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far

You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.

https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?

I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578

Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP

Yeah, I tried with Gapps, and I never rooted before first trying to boot.

As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%

Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation

Bump. I am also stuck in this state

Bricked but still have twrp

Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.

almost looks like it can't mount the system

IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.

I have no idea how it happened but I got my system mounted again that was my problem. I'm back.
thread can be closed

keeganjk said:
IDK, maybe a broken download. I'd try to restore a backup if you have one, if not Wipe > Factory Reset. If it still doesn't boot after 20 minutes, refer to this thread: https://forums.oneplus.net/threads/i-have-to-go-back-to-oxygen-os.649947/#post-16907420. Basically, download the OOS ROM onto your computer and use an ADB/USB Sideload in TWRP recovery (you can flash Oxygen Recovery from TWRP if TWRP doesn't work) to install it. May take a while to boot.
Click to expand...
Click to collapse
thanks for the reply mate

snipeez1987 said:
thanks for the reply mate
Click to expand...
Click to collapse
yw

snipeez1987 said:
Hey guys,
so I tried flashing Omni 8.0 rom and I was stuck at the boot screen. so I went back into twrp tried to reflash still nothing. I flashed a new version of twrp the one that can use multirom and it erased all my data. I flashed back the twrp I started with and now I can not sideload the full OTA zip to get back to stock. It says "cannot load one.zip" which is what I have it labeled as. I tried to download the recovery tool and I can't seem to figure out how to get the driver to work so it will see me on my comm port. Does anyone have any ideas on what to do or what happened? I'm stuck in twrp.
Click to expand...
Click to collapse
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.

ipredatorv said:
Easy fix for "Cannot load xxx.rom": you have to patch the adb.exe with a large address awareness program. Google it, I found one in another XDA thread.
Reason: the ROM filesize is too large. For small ROMs (like custom ROMs) adb would recognise it without any problems.
Click to expand...
Click to collapse
Awesome. I'll keep that in mind. I'm sure I'll mess it up again lol. Hopefully not though.

How do i install teamwin ?

I have a i9000 and i would like to install twrp so i can install a 7.0 rom but i dont know how to install twrp can someone tell me how?

I would also like to know this as well. I've tried CWM through odn but it's a zip so wont flash. I've tried it in stock recovery but obviously get the signature fail msg.

TWRP comes with the kernel and hence the ROM.
It gets automatically installed if you're on older BML/MTD device..
In which case you should have rebooted after acceptign wipe..

Ahh right, so I flash a new kernel to it and that comes with the recovery built in.
Do I flash the kernel from odin or stock recovery. Got the stuff to unbrick the phone if that happens, just wanted to know the right way before flashing stock rom back and starting again.

MrGRiMv2 said:
Ahh right, so I flash a new kernel to it and that comes with the recovery built in.
Do I flash the kernel from odin or stock recovery. Got the stuff to unbrick the phone if that happens, just wanted to know the right way before flashing stock rom back and starting again.
Click to expand...
Click to collapse
The kernel is flashed by the ROM zip... I dont remember if it automatically reboots to recovery or not..
However it does create a file in cache that makes it boot to recovery.. Since the /system is not yet installed.
You should flash the ROM after it boots to new recovery.. then install the zip file again..
All this is described in https://github.com/xc-racer99/android_device_samsung_aries-common/blob/aosp-7.1/updater.sh

I got there in the end.
I flashed CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.tar with odin, then installed cm-10.2.0-galaxysmtd.zip which also updated my older CWM. It had a spam, so I wiped/factory/dalvik etc from the updated CWM and then reinstalled cm-10.2.0-galaxysmtd.zip - now running the rom just fine.
Will be trying out some more over next few days now I have a nandroid of CM10.
Thanks for pointing me in the right direction.