Related
I have a AT&T Samsung Galaxy S4 (Unlocked) and I am currently using it on Cricket wireless. The phone is currently running on Android 4.4.3 and I would like to update the same to Lollipop. Samsung Galaxy S4 got Lollipop rolled out by AT&T recently but I was not able to get the same since I switched carriers.
Now what is the best way to update the phone. If possible I don't want to root the phone. I went to best buy local store but they were not able to do the same as they said the phone is unlocked. Please let me know how I can update my phone to the latest version. It will be really helpful if someone can point me in the right direction.
Thanks all in advance for the help.
Will putting a AT&T sim in my phone help with the OTA? In the sense if I get an AT&T sim card from someone or purchase one and put it in to my phone will that help with the OTA? I am not sure if this phone was unlocked by AT&T.
I was able to successfully install the updates on my phone. I was able to downgrade my phone by installing stock 4.4.2 using ODIN and then was able to upgrade my device to 4.4.4 first and then update to 5.0.1 via OTA. It was an easy process and the instructions in the ODIN thread was really helpful.
Similar situation
I too have an unlocked SGH-I337 that is unlocked from AT&T and I'm using it on T-Mobile. How did you perform the Lollipop update without an AT&T SIM? I took mine to the Samsung experience at Best Buy and they weren't able to do it via Kies and they believe it's because it's unlocked. Nothing else has been done to it, just the AT&T unlock so that I could switch carriers.
Thanks in advance,
Charlotte
Hi, I bought a Galaxy S7 edge sm-g935a, and I'm using it here in Japan with other network. I'm just wondering why everytime I check for an update, it always says I'm on the latest firmware even when I'm like 3 or 4 versions behind. Even when I connect it to smart switch it also says I'm on the latest firmware too, and when I try to click on firmware upgrade and device initialization, it says "Galaxy S7 Edge does not support initializing, please contact customer support". What should I do to get OTA updates? Thanks
AT&T phones will not receive OTA updates if you're not on the AT&T network. You have to manually flash them. You could keep downloading the latest firmware and flash it, or you could download the U firmware, which will receive updates regardless of carrier.
Sent from my SAMSUNG-SM-G935A using Tapatalk
ajemnace said:
Hi, I bought a Galaxy S7 edge sm-g935a, and I'm using it here in Japan with other network. I'm just wondering why everytime I check for an update, it always says I'm on the latest firmware even when I'm like 3 or 4 versions behind. Even when I connect it to smart switch it also says I'm on the latest firmware too, and when I try to click on firmware upgrade and device initialization, it says "Galaxy S7 Edge does not support initializing, please contact customer support". What should I do to get OTA updates? Thanks
Click to expand...
Click to collapse
I'd consider switching to the 935U Firmware, it kills the useless AT&T bloat, and you'll get OTA's
https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686
stew1411 said:
AT&T phones will not receive OTA updates if you're not on the AT&T network. You have to manually flash them. You could keep downloading the latest firmware and flash it, or you could download the U firmware, which will receive updates regardless of carrier.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Thanks man, I tried searching for its latest firmware but none of it seems to work out, I found some on google and download it but when I tried to unzip the files, all the files that I've downloaded we're corrupted LOL. I'm now switching to 935U firmware :good:
My S7 edge won't update either. I seem to be stuck on the May 2017 security update (Build # G935AUCS4BQE1). I bought my phone from swappa.com last month. The seller had it listed in the AT&T section as the SM-935A. I can use it for the most part without any issues (no Wi-Fi calling, not recognized on the AT&T network). When I check the IMEI # with Samsung, they show it listed for Sprint. Any suggestions of what I should do? I know one option is to flash the 935U firmware.
Thanks in advance.
caferacer73 said:
My S7 edge won't update either. I seem to be stuck on the May 2017 security update (Build # G935AUCS4BQE1). I bought my phone from swappa.com last month. The seller had it listed in the AT&T section as the SM-935A. I can use it for the most part without any issues (no Wi-Fi calling, not recognized on the AT&T network). When I check the IMEI # with Samsung, they show it listed for Sprint. Any suggestions of what I should do? I know one option is to flash the 935U firmware.
Thanks in advance.
Click to expand...
Click to collapse
All US (Snapdragon) based S7 Edges are physically identical, so you can run AT&T firmware on a Sprint S7E and vice-versa. However, AT&T is well known for disabling features based on IMEI, which it appears they are doing for WiFi calling. Unfortunately, it appears someone converted a device that started life on Sprint, so unfortunately you may be out of luck. The only way to fix the problem that I am aware of is to temporarily switch your SIM out for an actual AT&T device (whose IMEI is recognized), and that supports WiFi calling and VoLTE, then put the SIM back in your converted S7 Edge.
Converting to U will definitely make the phone a LOT faster (and the battery last longer), but you are giving up on any carrier features period at that point. I personally felt that the performance and battery features were a lot more important to me than WiFi calling or VoLTE and I switched to U a while ago. I haven't looked back, but that's just me.
Thanks jshamlet. I did a chat with Samsung and they confirmed that my phone was originally setup for Sprint and that it has been unlocked. My fiancee has an AT&T branded S7 Edge, so I can try putting my SIM in her phone for a bit. Converting to the U is something I'll seriously consider. I had an unlocked Moto X Pure Edition, so I'm used to not having the Wi-Fi calling or VoLTE.
I ended up using Odin to flash the SM-G935U firmware to my phone. Once that was finished, it downloaded and installed the April - August security updates, so I'm happy now. Also, no AT&T bloatware.
Here are the Firmware updates for the ATT 935A.
https://forum.xda-developers.com/att-s7-edge/how-to/updates-g935a-servers-adb-sideloads-t3583165
I have an unlocked S8 and I have not got the Oreo update Every time I go to check, it says your software is up to date. Is it because I am using a T-Mobile SIM? If yes, do I need to use ATT sim to get the update?
fordfulkerson said:
I have an unlocked S8 and I have not got the Oreo update Every time I go to check, it says your software is up to date. Is it because I am using a T-Mobile SIM? If yes, do I need to use ATT sim to get the update?
Click to expand...
Click to collapse
Yes you need an AT&T sim. Otherwise you will not receive ota updates.
Try it now
When I unlocked my AT&T S8, and stuck in a MetroPCS Sim, MetroPCS updated the phone to Oreo. This also results in the boot logo changing to MetroPCS which I think is unfortunate. And it installed a couple of Metro PCS apps including the voicemail app. This was all interesting since this means a carrier will update an OS on a phone that was originally sold for a different carrier. Seems that could run into problems but maybe not.
Did you figure it out?
fordfulkerson said:
I have an unlocked S8 and I have not got the Oreo update Every time I go to check, it says your software is up to date. Is it because I am using a T-Mobile SIM? If yes, do I need to use ATT sim to get the update?
Click to expand...
Click to collapse
I have an AT&T unlocked S8 Active with a t-mobile sim. I tried using an old AT&T sim with no plan, but it did not work. Do I need a sim with a plan to do the stupid update?
Take it to a Samsung Experience in a Large Best Buy and get them to Update it.
http://www.samsung.com/us/samsung-experience-shop/
Is there any way to manually update it to the latest version? Caz I am stuck on Android 7.0 as well, it won't update.
martyh1 said:
When I unlocked my AT&T S8, and stuck in a MetroPCS Sim, MetroPCS updated the phone to Oreo. This also results in the boot logo changing to MetroPCS which I think is unfortunate. And it installed a couple of Metro PCS apps including the voicemail app. This was all interesting since this means a carrier will update an OS on a phone that was originally sold for a different carrier. Seems that could run into problems but maybe not.
Click to expand...
Click to collapse
How long after putting in your metropcs sim did the phone update? I just unlocked an att s8 active today registered on my metropcs account but as of this moment it says it is up to date when it is clearly not.
Thank you
Sorry guys, complete amateur here. I have an AT&T S8+ that was unlocked using a code from AT&T.
I switched to T-Mobile and my phone worked perfectly after simply inserting a T-Mobile sim.
Carriers push updates over the air and I assumed I would have put in an AT&T sim to get the oreo update, but it's been out forever and I have not been able to update my phone. I've been busy and never got around to it. My phone was working fine so I just it slide.
I've tried using an AT&T sim. I've restarted my phone with the AT&T sim in it. I've tried manually searching for the update. I've tried smart switch. I even went to the Samsung experience store in NYC and they had no solution. My phone will not update.
Any suggestions?
SM-G955U
Android Version 7.0
Android security patch level April 1st, 2017
Baseband - G955USQU1AQDE
I've been reading some of these threads and I'm not sure if this is correct, but I can use Odin 3.13.1 to flash to CRB9? That would get me to the first Oreo release?
Sorry if this is not the correct place for this thread. Thanks
Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Lavman72 said:
Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Click to expand...
Click to collapse
Are you using an AT&T SIM card? If you purchased an AT&T model AT&T sends OTA updates whether you got it from AT&T or Samsung. If you aren't using an AT&T SIM they won't send you any OTA updates and Samsung only sends OTA updates to the carrier free versions of the phones.
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Lavman72 said:
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Click to expand...
Click to collapse
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
jhs39 said:
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
Click to expand...
Click to collapse
happen to have remember the thread which had the carrier free firmware?
Lavman72 said:
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
Click to expand...
Click to collapse
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
jhs39 said:
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
Click to expand...
Click to collapse
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Newer firmware is all-inclusive so you could download firmware with Frija and flash it with modified Odin even if it isn't AT&T firmware. The problem is that if you flash a build number AT&T didn't actually use on their devices you still won't get OTA updates from AT&T because their servers won't recognize the software version you are running.
---------- Post added at 02:03 AM ---------- Previous post was at 01:58 AM ----------
Lavman72 said:
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Click to expand...
Click to collapse
Have you tried the standard Samsung SmartSwitch program? Maybe it can update AT&T firmware now but it didn't in the past.
---------- Post added at 02:13 AM ---------- Previous post was at 02:03 AM ----------
If your phone is not carrier locked you could flash the U1 firmware and then you would get OTA updates from Samsung instead of AT&T. But you might not have access to some AT&T services like visual voicemail without AT&T firmware. AT&T also hates unlocked phones so it's possible Volte and Wi-Fi Calling will stop working. Some AT&T customers with unlocked phones were able to get the services activated by calling AT&T but success with AT&T Customer Service is hit or miss at best as you already discovered.
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/g...M-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
No G975U1 and G975U firmware are interchangeable. If your phone was still carrier locked you might get a message asking for the unlock code but you aren't using an AT&T SIM so your phone obviously isn't network locked. I went from AT&T G975U firmware to U1 firmware with no problems.
Im glad I'm not the only one experiencing this. My wife and I did a bogo deal for the Galaxy s10+ back in March. My phone has recieved updates regularly, while my wife's phone is still on the March patch and security. She hasn't even recieved the fingerprint update fix. Tried calling AT&T about it and they were totally unhelpful. Told me I had to contact Samsung about that and that they couldn't help with the issue. Im debating on calling them back and trying to speak with someone more knowledgeable, but it might just be easier for me to update her phone manually. I haven't had to do something like that in ages, so I wanted to ask for some guidance on here.
Would i need to do each consecutive update she's missed manually? Or would just updating to the newest firmware outright do the trick?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
Hey do you have the G975USQS2ASI6 ODIN files? I have been looking all over for it to flash it to my phone.
I just want to note, I am also in the same boat and it's INCREDIBLY frustrating. Both phones purchased in March with the BOGO deal, both phones stuck on the July 1st security patch. Supposedly what I've found after reading quite a bit is you can bring the phone to a local samsung repair center and they can flash the newest firmware, once you're up to date SUPPOSEDLY that resolves the OTA stuff. I don't believe it though.