I need help with flashify... recovery deleted - Zuk Z1 Q&A, Help & Troubleshooting

Good morning, I go to ask for help, I tell you.
My ZUK Z1 from "origin" 5.0 or 5.1 (I do not have it in front right now) and with a recovery of CM, when installing with flashify a TWRP, a version 3.0 .... a very curious thing happened to me. It tells me that it is successfully installed, but not only has CM recovery been deleted, but it has not installed the TWRP ...
I tried to restart in recovery mode and, of course not having it, it is a step that is skipped and restarted completely.
I have not tried with ADB or anything like that, I wanted to do it directly with the mobile but I am seeing that there is no way ...
It may be that if I install with flashify a TWRP 2.8 ... an older recovery, will it install?
Or should I look for a CM to install ...
Or the only solution is to do it through PC ...
A little light please. Thank you.

Will suggest you to flash twrp 3.1 with adb

Thanks for your quick answer, I´ll try to flash it with adb
Anyone knows where to get an older version of twrp, like 2.8.... ?
I would like to try again with flashify

Related

Lg g2 no os at all

Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Spumpkin said:
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
Click to expand...
Click to collapse
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
renzo090513 said:
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
cm11 => jb bootloader
cm12, cm12.1 and cm13 => kk bootloader
klemenSLO said:
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Click to expand...
Click to collapse
The current version is 2.8.7.3. Should I try other versions?
Did you solve the issue? Or is it still not allowing you to get into your F/W?
staylecrate said:
Did you solve the issue? Or is it still not allowing you to get into your F/W?
Click to expand...
Click to collapse
Hi!
I tried to install TWRP version 2.6.6.3, but it fails to flash it so I'm stuck with the version 2.8.7.3. All I'm able to enter is just the recovery mode. I can't enter the download mode so I can't flash the stock firmware.
Currently I'm out of ideas. I can't flash any OS, the TWRP fails everytime and creates errors.
Try flash bumped kernel like lp dorimanx then flash bumped bootstak then lp rom like cloudy or stock. Or google this: lg g2 unbrickable now xda ...that work for me

[RECOVERY] [TWRP 3.0.0-0] for Vodafone Smart Prime 6

Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install​​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
​How to install​
​
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks

Need help - how to get from CM13 to CyanogenOS (Stock?

Hi all,
I need your help - I installed the CM13 official, but I'm not happy with it and want to go back to CyanogenOS (Stock). I already downlaoded several files, but the sideload fails with "incompatible file system" even after factory reset.
My guess is that the CM13 bootloader needs to be downgraded, but I don't know how to do that. But that guess may be wrong....
Any help appreciated - device not working right now except for recovery & fastboot.
Have you tried with qfil?
fkoehn said:
Hi all,
I need your help - I installed the CM13 official, but I'm not happy with it and want to go back to CyanogenOS (Stock). I already downlaoded several files, but the sideload fails with "incompatible file system" even after factory reset.
My guess is that the CM13 bootloader needs to be downgraded, but I don't know how to do that. But that guess may be wrong....
Any help appreciated - device not working right now except for recovery & fastboot.
Click to expand...
Click to collapse
Just download the cm-12.1-YOG4PAS3OH-ham-signed-fastboot.zip and extract the recovery. Download cm-12.1-YOG4PAS3OH-ham-signed.zip too. Flash the COS stock recovery with fastboot. Then boot your phone up and do an adb reboot recovery. Go to adb sideload mode and do an adb sideload cm-12.1-YOG4PAS3OH-ham-signed.zip in Terminal or cmd. Wait until it's finished. You should be back on stock rom. To download the file just google for Cyanogen OS support. You will find the files to download.
http://4pda.ru/forum/index.php?showtopic=701320&st=1320#entry46208060
use it , care all data will be lost .
fkoehn said:
Hi all,
I need your help - I installed the CM13 official, but I'm not happy with it and want to go back to CyanogenOS (Stock). I already downlaoded several files, but the sideload fails with "incompatible file system" even after factory reset.
My guess is that the CM13 bootloader needs to be downgraded, but I don't know how to do that. But that guess may be wrong....
Any help appreciated - device not working right now except for recovery & fastboot.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=261NdvyULeU - This may help.

rr 7.1.2 without gapps/ recovery mode not possible

Hello xda developers this is my second thread sorry for the first one that i made yesterday, I am having a problem with my lenovo k4 note a7010a48
after rooting successfully I proceed to flash rr 7.1.2 but did not flash the gapps now my problem is how to go back on recovery mode to start over again
I already used the power button followed by the volume up down buttons but it is not working like before it is nougat. I only need to get to recovery mode. Please help and thankyou in advance. More power
Does u have root access now and which version of rr u flashed
yes the phone is rooted already and flashed with rr 7.1.2 only need to open recovery mode which is I have no idea
Contact in telegram app 9032015333 I will tell u
i dont know that or how to do that can you teach me please thank you
I have the same issue. Can't enter into recovery and the phone is unable to start.
Same Issue || Don't Know How To Fix
Hi,
I am searching for a possible solution from a day. But could not find a working solution.
After successfully flashing RR-N-5.8.5 (Android N)
Unable to go into recovery.
PROBLEM DESCRIPTION:
1. When Press Vol Up + Vol Down + Power Up
2. Recovery is not loading up
3. Instead it goes in boot loop
4. Normal boot mode and fast boot mode are working perfectly fine
SOLUTIONS TRIED:
1. Flashing recovery again using fastboot mode
2. Flashing different recovery, i.e updated version of recovery
As all recoveries which were available were for marshmallow version. I am not sure but have doubt as android version is updated so the kernel so do recovery also become obsolete in this case ?
Any help is welcome and appreciated
Thanks
---------- Post added at 05:18 PM ---------- Previous post was at 05:12 PM ----------
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
for fastboot mode and for recovery mode yes i tried it also but thats the problem no recovery mode. I will wait for the solution when it comes i will just store my phone for a while.
Hi Developers,
Is it possible to reset the phone at hardware level? I can't even connect the phone to PC as it keeps on rebooting.
Please note: upgraded to Nougat and wanted to do the second recovery as suggested by mohancm in the post. When the phone rebooted (before flashing the second recovery), the problem started.
Please let me know if any one has a fix/workaround for the issue.
Thanks,
Srihari
1.Download TWRP recovery unzip files.
https://drive.google.com/file/d/0B1CKVcdcbHFPUzFCODVMN0ZfTW8/view
2.Now in folder TWRP\img\ there is the file recovery.img.
3.Download the second recovery for nougat recovery-Nougat.img and put in the TWRP\img folder.
https://androidfilehost.com/?fid=673368273298981920
4.Rename it as the original, recovery.img and replace it.
5.Then connect your phone to usb and select the 3th option from usb debugging message
"Transfer photos(ptp)"
6.run TWRP_Install.bat from TWRP folder
And you are done, had the same problem and I figure this solution, hope it will help.
I cannot locate the transfer photos(ptp)
ok I already done the part I am now on the recovery mode thanks. new problem of mine is after flashing the rom gapps and recovery after reboot it goes back to recovery mode did I miss something on flashing?
ok so i already passed this problem thanks for the help xda community thank you very much but I have this bootloop problem maybe I did a mistake flashing before rebooting sorry i am a noob in this kind of upgrade specially in mobile phones. I will be careful next time after I passed this problem I hope you will help me once again, my phone in bootloop is killing me.
I have same issue... I flashed gapps and my phone is working smoothly... The issue is i can't go into recovery mode... I tried some one tap reboot to recovery apps but all whats happening is phone restarting normally.
For those who can't access recovery mode. You were supposed to flash updated recovery image after flashing rrn rom.
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Should work.
Worst case, restore by flashing stock rom using SP flash tools. And then start all over again.
If you face any issues ping me. Even I had faced this issue and fixed it after a lot of struggle. I can try to help you.
Or you could download Official Twrp App directly from play store, then find A3000 (Air Row) in 'select device' and flash that to recovery, (if your phone is rooted) then you are good to go, go to recovery mode and thats all, your twrp is now has been flashed.
Thank me later??
MisledMew said:
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Click to expand...
Click to collapse
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
firelmnt said:
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
Click to expand...
Click to collapse
Glad it helped

Stuck in Bootloop no OS, please help.

Hi guys,
I have been reading similar threads and trying to find a solution but could not find what could help and ran into other issues. Hope someone can help me fix this.
I was trying to flash a custom ROM. had the device unlocked and installed twrp using adb.
It was a mistake to not back up. I tried to flash the firmware + extendedUI rom + magisk. Only magisk gave some error.
tried to reboot and got stuck in bootloop. Entered Twrp tried to do it again so wiped data,system,cache and then realised my folder with the rom disapeared. So now no OS and not sure what to do.
I was trying to use adb sideload to push the new zips on the device but the sideload just disconnects at 8% Understood that might drivers might be at fault. . Been trying to find and update drivers and might have done some mistakes there, as chose to update unknown device automatically with device manager and now it disappeared as well.
I read about recovering with Miflashtool but got confused whether thats the right way.
I would prefer to install a custom rom like the ExtendedUI or AOSPextended.
FuzzEdgar said:
Hi guys,
I have been reading similar threads and trying to find a solution but could not find what could help and ran into other issues. Hope someone can help me fix this.
I was trying to flash a custom ROM. had the device unlocked and installed twrp using adb.
It was a mistake to not back up. I tried to flash the firmware + extendedUI rom + magisk. Only magisk gave some error.
tried to reboot and got stuck in bootloop. Entered Twrp tried to do it again so wiped data,system,cache and then realised my folder with the rom disapeared. So now no OS and not sure what to do.
I was trying to use adb sideload to push the new zips on the device but the sideload just disconnects at 8% Understood that might drivers might be at fault. . Been trying to find and update drivers and might have done some mistakes there, as chose to update unknown device automatically with device manager and now it disappeared as well.
I read about recovering with Miflashtool but got confused whether thats the right way.
I would prefer to install a custom rom like the ExtendedUI or AOSPextended.
Click to expand...
Click to collapse
The zip files are to big to push them through adb sideload.
Just connect the cellphone to the pc while in twrp and mount otg

Categories

Resources