hi, i have ALE 23 turned into a ALE 21 by installing 6.0... the phone yust worked fine and so... but some how the wifi and bluetooth stops working... now im tying to downgrade or reinstalling 6.0 ... some people say this can fix the problem... but the thing is tht when i try to flash the roms (5 and 6) it doesnt happend... the flash process ends .. but the phone stays in 6.0 i have tryed boot loader too for 6.0 but still not flash at all... whats wrong?
You seem to have tried the things I've mentioned here. Try them again. Tell me what errors happen.
Related
Hey guys, im new here but have been reading but now i am facing a problem i cant seem to fix
my phone became a type 1a brick, os booted radio wasnt working so i got spl etc tried flashing the radio rom and everything was going well until it said my phone was no longer connected and the recovery process wasnt working.
so i tried soft resetting and i got the bootload screen and now my phone is a 2a brick, the mtty set 14 command didnt work so i tried reflashing the rom to the most recent but everytime i would try to flash it it would either freeze up at 12 or 15% and lose the connection to the phone.
so basically im stuck right now and have no idea what to do so if someone could point me in the right direction i could try fixing my phone
forum.xda-developersxxxxxxcom/showthread.php?t=732380
Follow the guide and booted haret.exe. Didnt run CLRCAD.EXE as it was not in the folder.
It booted up fine tho it kinda stod still and I removed the batteri to try again (guide didnt say I couldn't =s and read somewhere that it may fail on first boot)
Now it needs power to start but only gets to chucky "loading please wait" and the 3 red lines then it reboots...
How ****ED I'm ?? (cant hardreset it)
Got it to hardreset but changes nothing... Guess I just give it to some homeless guy and never gonna buy a WM phone ever again...
Have you tried flashing a stock rom to it? If you can get it to hard reset you should be able to get into bootloader as well and then flash a stock or reflash your rom
i was on indian 26 firmware before then with da help of rooting i updated to nordic 2.1 everything was fine i could make calls n all n i did reset to my phone after tht it stoped recognizing my x10.i used repair option 3 times still not able to recognize my phone so with the help of EXPLOID one click root thought of going back to 1.6.
now the problem started i went on to cmd prompt n selected option 1 to instal generic 26 firmware after it showed me test end i disconnected my phone n i restarted it n now the prob is it showing me black screen n the phone is continuously vibrating pls help me i want my phone to get switched on pls
um.....pull the battery out for 30 seconds and try again?
mrtim123 said:
um.....pull the battery out for 30 seconds and try again?
Click to expand...
Click to collapse
luckly i used nordic_flasher n did n now its booting im on 1.6 but again the problem is its not recognizing my simcard(indian). is it cox im using nordic firmware ??
i updated to 2.1 and the problem is still there my simcard is not recognizing somebody pls help me..how can i flash back to indian 26 firmware..pls
Hello,
I searched the internet for about 2 hours and couldn't find a solution, thats the reason why im opening this thread, im stuck.
Before i did following steps, the phone wouldt boot into winmo, it was constantly rebooting.
So i tried to flash a new rom.
It was really difficult to flash the phone because i couldnt use hspl it froze every time i tried, so i got uspl working after a few attempts. I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=671277
after sucesfully flashing i turned the phone on, same issue, it got stuck in a boot loop.
So i decided to get the phone fully charged again an leave it for like an hour, after the break i restarted it and it worked nicely. So it was time to get the sd card in the slot and the sim, so i did a quick restart... but since then im having the same issues again, stuck in a boot loop, no matter what i do, even if i take out all the cards still happens. I tried to wait and charge, but no sucess...
i have no idea why the phone isnt starting winmo, but it drives me creazy...
32MB
SPL 1.54
anyone have any ideas, had same problems? Looking forward to hear from you.
Thanks in advance
________________________________
Found the problem, the battery connector seems to be broken, as long as i push against the battery the phone works nicely. unfortunatly this means good bye.
hi,
it´s the same problem for me. tryed different hardspl, uspl but no change.
ist restarts sometime direct after the bootloader and sometime it starts normaly and then restart.
i´ve changed the battery but it don´t solve the problem.
any suggestions?
My 1.3 focus is stuck in the Samsung logo screen. It lloks like it is in an endless reboot as the logo will go away for a moment then reappear.
I am able to get the phone into Download and Format mode with out issue.
I have also been able to succesfully reflash the original firmware without issue, but the same result none the less.
Any ideas on this?
I had put the mi7 ROM on which worked fine. This morning phone was stuck on the logo. I reflashed the mi7 without issue as well before trying the original Samsung ROM
Hi Guys
i have this same problem with my focus its also ver 1.3
i had an error on the mango update (usb cable bad apparently) according to the code, and after the failed update the phone was acting stupid and cutting out when it wants so i flashed the phone with the rogers rom, and it worked fine attempted to do the mango update again in a diff usb port and got the same error so i went to reflash the phone again so i could get my mate to try his cable the flash seemed to go through with no issues until the first reboot, then instead of getting the connect to computer screen i just got the samsung logo flashing up then restarting and flashing the samsung logo again i have tryed to flash again with diff versions of the tool and original rom and rogers rom many times but still get the same thing the only strange thing is that i cant get into the hard reset mode i can get into download mode fine but not format it just flashes back to the same flashing samsung screen Please Help or is the phone Buggered at a wild guess iv got a problem with the internal memory ??? Lost and need help
same here, please help
amitbhavi said:
same here, please help
Click to expand...
Click to collapse
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
EnderPsp said:
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
Click to expand...
Click to collapse
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
reycarp said:
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
Click to expand...
Click to collapse
I see. You're the 4th person I encounter having this problem after flashing magldr. You should ask in the magldr thread. I'm not sure if it's really magldr related but I don't see anything else that could cause it...
Make sure you specify there your revision(3/4)/ as well as OS version.