Hi !
I would like to install Paranoid Android but I have a question about root.
If I root my phone and that I install Paranoid Android (with bootloader unlock & twrp ofc), will my telephone always be root ?
Thanks for your help !
No, you have to root again because Paranoid Android comes without root by default. But you can easily root your phone if you use Meticulus' TWRP, after flashing the ROM and the GApps, do not reboot yet and go to Advanced -> Extra -> SuperSU and you will root your device
Ok thanks but do I have to reboot between the ROM and the gapps ?
No, flash ROM+GApps+SuperSU then reboot.
Ok, thanks a lot =)
Related
Hi!
This is my question, Why I lost my ROOT when I install another ROM?
I have the following case.....
- CM with Android 4.3 and Rooted, working without problems.
- I install the ROM [JB 4.3 JWR66Y] [Linaro gcc 4.8] ♦ PURITY ROM ♦ (Mako) 24/10 with the CWM (before formating everything)
- I install the last SuperSU version with the CWM, without problems.
- I start the Nexus4, I try to open SuperSU but I receive the error "There is no SU binary installed, and SuperSU cannot install it."
- I format everything again with CWM, and I install again only the CM Android 4.3, without SuperSU or something similar.
- I have root permisions.
What I´m doing wrong, to don´t get the Purity Rom with Root??
Problem SOLVED!!
- With the CM Rom, install the SuperSU via CWM.
- Download TWRP (http://teamw.in/project/twrp2/129) and install it, but not "activate" the recovery jet.
- Open SuperSU and desactivate activate the "Super User" check, some times, but leaving at the end activated.
- Open TWRP, give root rights!!! and in options, select "Install open...:"
- Install the Purity ROM via TWRP
- Enjoy
All custom ROMs come rooted. Of course SuperSU isn't going to work; the original SU application and binary are still in place. You never had to flash anything root related.
korockinout13 said:
All custom ROMs come rooted. Of course SuperSU isn't going to work; the original SU application and binary are still in place. You never had to flash anything root related.
Click to expand...
Click to collapse
not true. many custom roms come without supersu or superuser, where it would be the users responsibility to flash either supersu or superuser.
This PURITY ROM comes without Root, thats why they say that you need to use SuperSU
Hi guys!
I am a Yureka user. Yesterday I updated the phone with latest CM nightly build and lost root privileges, now i am not able to root it again.
SU update method doesn't work any longer nor does the root access in developer options.
I flashed this updte using custom recovery (CWM).
Please guide me how to retain root after this update and also if i need to be on stock recovery.
Thank you!!!
Hi.
I have used crDroid and I have wanted to uninstall system app, so I needed to root. All proces of rooting has been fine (by Odin), but after reboot operating system does not start and I have not got TWRP! Thank you for all your help to me!
Kubex52 said:
Hi.
I have used crDroid and I have wanted to uninstall system app, so I needed to root. All proces of rooting has been fine (by Odin), but after reboot operating system does not start and I have not got TWRP! Thank you for all your help to me!
Click to expand...
Click to collapse
Of course it will not boot. crDroid is rooted by default.
You probably tried to flash cf-auto root and that's ONLY for stock roms. Never ever use it for custom roms because every custom rom has standard root.
Because crDroid is based on CM you probably have to enable root in developer settings or flash the latest supersu trough TWRP.
You need to reflash your rom to get your rom booting again though.
Thank you!
Lennyz1988 said:
Of course it will not boot. crDroid is rooted by default.
You probably tried to flash cf-auto root and that's ONLY for stock roms. Never ever use it for custom roms because every custom rom has standard root.
Because crDroid is based on CM you probably have to enable root in developer settings or flash the latest supersu trough TWRP.
You need to reflash your rom to get your rom booting again though.
Click to expand...
Click to collapse
my sph-l720t wont tun on past logo screen after teying to root. how can i fix this? thanks Dallas
Duwhop31 said:
my sph-l720t wont tun on past logo screen after teying to root. how can i fix this? thanks Dallas
Click to expand...
Click to collapse
No idea. You haven't told us how you tried to root.
After installing the lollipop update I lost the rooting to the phone.
I rooted my phone again but to be sure for the next time,is there a way to root Lenovo a6000 plus permanently?
When u flash new rom, you have to root again, no way for permanent exept root option include in the rom
You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it
GuestStar said:
You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it
Click to expand...
Click to collapse
Dude sometimes root doesn't install properly i don't know why... I am on stock with 1.4Ghz oc kernel... Thing happens to me is that whenever i reboot my phone. Root stops working and says su binary needs to be updated.. I just have reinstall again and again to keep it working after boot.. So do u have any to solve it?
MukulGamer said:
Dude sometimes root doesn't install properly i don't know why... I am on stock with 1.4Ghz oc kernel... Thing happens to me is that whenever i reboot my phone. Root stops working and says su binary needs to be updated.. I just have reinstall again and again to keep it working after boot.. So do u have any to solve it?
Click to expand...
Click to collapse
For me root still work even on reboot. To root my phone, i flashed SuperSU.zip with custom recovery twrp. How about you? Did you using same thing like me or by apps like KingRoot.apk?
GuestStar said:
You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it
Click to expand...
Click to collapse
Yup obviously.. By SU... I never use kingroot... Well i know it shouldn't have happened... Btw fresh rom install will solve it.. But i don't wanna do that.. Setting up phone again and again suks.. I just asked it because i thought if you might have had this problem! Thanks btw
To clear things up. Think of root as a system module (binary) ("su" module located in "xbin"). Each time you install a new OS, core partitions need to be formated (/cache, /data, and ofc /system). If the SuperUser module is not pre-installed in the new firmware you are flashing, it can be additionally obtained through Chainfire's installation zip. Nearly all custom ROMs have it and will work just fine, with some needing user input to activate it (Settings > Dev Settings > Root Access). While stock ROMs will NEVER have root capabilities pre-loaded.
So, all in all:
No, there is no such thing and will never be, as permanent root. Everything is being overwritten all the time.
Rooting and re-rooting the A6000 is safe and easy.
hi ppl
it was rooted before. used twrp and some custom roms. but later it unrooted somehow.
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
io root made it stuck on bootloader animation so I flashed a backup.
how to root it?
thx in advance
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
I tried flashing super su, magisk and ioroot. supersu and magisk turn with an error msg
Click to expand...
Click to collapse
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
zemix said:
1) flash latest twrp http://www.gregtwallace.com/lgg2-projects/twrp/ - then reboot into twrp
2) made absolutely all wipes incl internal and data (delete all stuff) - then reboot into twrp
3) connect to usb - and simply copy rom, gapps, and root solution what you want to flash
latest stable magisk for twrp - https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
latest supersu for twrp - Recovery Flashable.zip http://www.supersu.com/download
3) flash the rom what you wanted and flash gapps
3) flash magisk or supersu
(if android 7.1.2 or higher of course - I recommend magisk, because of working nfc pay features, a lot of great systemless addons etc...)
if you prefer old lollipop rom (for example CloudyG2_3.3 ) - it supersu only.
This is the correct sequence - which will eliminate problems with the firmware. If you deleted and installed the root earlier (as you say)
jeezes)) you already killed the rom.... and then restore the all this restores backup, this is a "dirty flash" with a bunch of "remnants". I recommend to do clean flash it in the specified sequence and everything will be ok.
You will spend a couple of 1-2 hours only on installing (and setting) completely all applications. It is not so difficult. But it will save you from a bunch of nonsense questions...
If you actually don't have TWRP recovery installed or old Kit kat Rom - this is absolutely another question and the instructions will not work for you. Also, Kit Kat and Lollipop based ROMs does not support Magisk - because of this error.
Click to expand...
Click to collapse
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
so any advice anout that problem?
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Screenshot https://i.imgur.com/6IcIvJx.jpg
slabongrade said:
thx bro. I did all the steps but it seems same problem going on. sure I want the latest of everything. better updated all. so, using the latest twrp, I wipe all data then format all data then again wipe everything
this aosp rom and gapps worked perfectly. then flashed teh magisk but again its unrooted.
it installs magisk perfectly but root checker says its not rooted. anyway thx for help
btw, aosp rom android 9 has a bluetooth bug. giving a bluetooth stopped message every 10 seconds.
Click to expand...
Click to collapse
flash magisk.zip and install magisk.apk to root android 9
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
zemix said:
you must grant root permission when popup (magisk) appears.
its not automatically
popup similar as in supersu
root works excellent on d802 with Magisk
for example Es File Explorer or any Root Checker
---------- Post added at 17:12 ---------- Previous post was at 17:10 ----------
I use 7.1.2 android based AospExtended v 4.6
because latest pie rom has bugs and not stable
Click to expand...
Click to collapse
zemix said:
Screenshot https://i.imgur.com/6IcIvJx.jpg
Click to expand...
Click to collapse
elffoh said:
flash magisk.zip and install magisk.apk to root android 9
Click to expand...
Click to collapse
I used supersu and it turned out to be "certification verify" problem. OS not running because of this problem but says rooted. so I can still reach twrp but it really become annoying. this is my old phone and will use as 2nd in my Thailand trip soon.
what to do now? can I use unrooted with a sim card? with no problem?
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
zemix said:
Please, don't use this nonsense "overquoting" when you answer to someone. Have some respect to the forum rules, and users.
if you want stable rom for LGG2-D802 flash
1) aosp extended based on 7.1.2 or 8.1 versions of Android.
2) flash gapps nano
3) flash magisk zip
4) after rom starts - do the first quick settings - then open Magisk (and if needed update the Magisk manager)
Do not flash both (supersu and magisk) risk to brick the phone.
"device not certified" messege will be always if you use Supersu. It's obviously. Using supersu you unable to use apps like Google pay or any banking apps, because of system root.
Magisk is systemless solution, that's why Google do not recognize Magisk's root. And Play Store on about screen always show "Your device is certified". Also you can Hide root from some apps using Hide option in Magisk manager (it's very useful for local banking apps).
I have a suspicion that you used an older version of Android KitKat (official). And now you try to flash a new Rom (above the Android 7.1.2+). You can't do this. Because you must have Lollipop bootloader. You must be an Android Lillipop first. And then (get Root, then TWRP). And after all that - you will be able to flash some of Rom we are talking about.
Click to expand...
Click to collapse
Oh Finally!
dowloaded aosp 8.1 and all done. I was trying to use android 9 to be updated. But, pie becoming to be a "creampie" to me so I listened your word. and did it
just opened recovery mode and deleted all the zips. and copied new ones and flashed in order
1) aosp extended 8.1
2) open gapps nano for 8
3) magisk beta (yes this time I tried beta ver and it worked!)
after settings etc. checked with root checker and it was ok. so magisk.apk is not necessary now
thx again bro