Permanent Root? - Lenovo A6000/Plus Questions & Answers

After installing the lollipop update I lost the rooting to the phone.
I rooted my phone again but to be sure for the next time,is there a way to root Lenovo a6000 plus permanently?

When u flash new rom, you have to root again, no way for permanent exept root option include in the rom

You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it

GuestStar said:
You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it
Click to expand...
Click to collapse
Dude sometimes root doesn't install properly i don't know why... I am on stock with 1.4Ghz oc kernel... Thing happens to me is that whenever i reboot my phone. Root stops working and says su binary needs to be updated.. I just have reinstall again and again to keep it working after boot.. So do u have any to solve it?

MukulGamer said:
Dude sometimes root doesn't install properly i don't know why... I am on stock with 1.4Ghz oc kernel... Thing happens to me is that whenever i reboot my phone. Root stops working and says su binary needs to be updated.. I just have reinstall again and again to keep it working after boot.. So do u have any to solve it?
Click to expand...
Click to collapse
For me root still work even on reboot. To root my phone, i flashed SuperSU.zip with custom recovery twrp. How about you? Did you using same thing like me or by apps like KingRoot.apk?

GuestStar said:
You wanted to root again hah? Flash SuperSU.zip (based on my knowledge stock LL cannot/hard to root withe root.apk like kingroot. So, i think the latest tricks is flash the supersu.zip) but still... if you are Advanced User if not dont trying it
Click to expand...
Click to collapse
Yup obviously.. By SU... I never use kingroot... Well i know it shouldn't have happened... Btw fresh rom install will solve it.. But i don't wanna do that.. Setting up phone again and again suks.. I just asked it because i thought if you might have had this problem! Thanks btw

To clear things up. Think of root as a system module (binary) ("su" module located in "xbin"). Each time you install a new OS, core partitions need to be formated (/cache, /data, and ofc /system). If the SuperUser module is not pre-installed in the new firmware you are flashing, it can be additionally obtained through Chainfire's installation zip. Nearly all custom ROMs have it and will work just fine, with some needing user input to activate it (Settings > Dev Settings > Root Access). While stock ROMs will NEVER have root capabilities pre-loaded.
So, all in all:
No, there is no such thing and will never be, as permanent root. Everything is being overwritten all the time.
Rooting and re-rooting the A6000 is safe and easy.

Related

Easy root your Edge and other phones with Stock Kernel (no need to use a custom one)

Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
so can i install xposed without flashing kernel?
Does this work with N915A?
Aggiefury101 said:
Does this work with N915A?
Click to expand...
Click to collapse
Please let me know if you are able to root it. I am wondering if other universal rooting methods work with this phone.
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
mtayabkk said:
so can i install xposed without flashing kernel?
Click to expand...
Click to collapse
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Darth-Kadd said:
You could of already done that. I flashed xposed and it worked without root. Just flash in custom recovery
Click to expand...
Click to collapse
without ROOT ? how
No issues with latest stock firmware on 915G. Thanks. ?
mtayabkk said:
without ROOT ? how
Click to expand...
Click to collapse
Trust me, I've done it without root. I had xposed installed before with root then I flashed the latest stock rom from n915w8 and flashed xposed right after without wiping data and it worked. I guess it was because the xposed modules were already configured but ultimately, I did not root in order to use xposed. The functionality of xposed is increased if you root. This is from my experience
The latest xposed for Samsung probably has some loop hole I'm unaware of that allows you to install it without root.
Petteri said:
Everything worked fine, you don`t need wondering...it`s Chainfire who developes here! Schould work on all phones (inkluding A VErsion) from Android Lolliopop and higher!
Click to expand...
Click to collapse
the boot-loader is not unlocked for n915a currently, how can we install twrp? or you mean install supersu by odin without twrp?
step 2... Install latest twrp... How can you do that if your phone has never been rooted before?
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Petteri said:
Chainfire has developed a new SuperSu Update zip, Version 2.60 and newer 2.61.
with using this update zip, you will not need a custom kernel for getting root in future, works fine on F, FY Model on Android 5.1.1 (tested).
many, many THX to one of best worldwide developer!
This method will work on many othere phones, please read threads for more infos!
First read here: http://forum.xda-developers.com/app...ersu-v2-05-t2868133/post64161544#post64161544
then download latest SuperSu Update zip here: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Changelog here: http://forum.xda-developers.com/showpost.php?p=23427824&postcount=3
very easy to use:
Install Stock Samsung based FW with stock bootloader etc...
Install latest TWRP
Use TWRP to install latest SuperSU Zip
Attention: If TWRP tells you SuperSU is not installed, and asks you to install it, do not do it, you will break things!
many thanks to developers!!!!!! Great new thing!!!!
Click to expand...
Click to collapse
Do you by any chance have the latest twrp (2.8.0.7) in .tar file? I've been lurking around for a while now and I'm not able to find it. I can only find .img and I need Linux to convert it to .tar to be able to Odin. I've lost root and now I can't get it back.
Osaab said:
for my note edge sprint (915p) i used CWM cos twrp didnt work. after flashing supersu said i dont have root access and if i would like to have it. I SELECTED NO. after rebooting once phone booted fine. took a while for supersu to take over things and now its all good
Click to expand...
Click to collapse
ok now that ive spent more time with it i believe the root i got is incomplete. on many apps supersu dialogue doesnt pop and they dont recognize the phone as rooted. i used titanium backup to try and remove system apps and despite everything going fine the apps didnt go anywhere
UPDATE: problem fixed. I edited the build.prop in /system/ using a build.prop editor and now all my apps are asking for root
In build.prop look for ro.securestorage.support=True and set it to False
Also solves if your phone keeps forgetting the wifi passwords
It works. SM-915F. Just don't forget to off 'reactivation lock' in security tab in androud in order to install TWRP successfuly. Thanks a lot!
No you're right. Twrp is in img format but you can easily convert it to tar using a linux emulator. Took me minutes to convert it to tar. Google "how to convert img to tar. Running twrp fine
Does it work in 915V ??
So,it's strange how the method works on my 915f. For example; Titanium Backup can't remove systems apps. It looks like I have a root, but not fully operated. Any advices?
Does this still trip the knox counter?
I want to root, but I must keep my warranty as this N915F is on my company's name.
benna said:
Does this still trip the knox counter?
Click to expand...
Click to collapse
Yes. Knox tiked(((

Can't root anymore

Hi All,
I had obtained root via CF-Autoroot and was using it with xposed for the last few weeks without issues. I took the lunge and tried to install phh super su, magisk systemless root. so the nightmare begins for me and i'm hoping it's an easy fix!
My system is still encrypted (I believe because TWRP can't see the system) SD card is fine. I've wiped my device a few times already and am hoping I don't need to wipe it again(prior to this setup).... So currently it's running fine without root access (How I hate android without root!!!)
- I've tried flashing Supersu zip in TWRP and it's failed - I believe it's not supported yet for encrypted devices.
-I've tried using the original CF-Autoroot method I used initially.
Both methods, it boots up straight away (no optimising apps) and after installing supersu app from playstore, it says no binaries found.
What are some ways I can inject root without wiping my device?
Please help me! Thankyou!
Maybe go back to the start and flash original FW through Odin and start from scratch, so you have a fresh phone to work with.
dwarfer66 said:
Maybe go back to the start and flash original FW through Odin and start from scratch, so you have a fresh phone to work with.
Click to expand...
Click to collapse
That's my plan when I get home tonight. I want to flash the original firmware file my phone started with (I'm assuming it won't delete anything?) and then run through the root steps again.. if it doesn't work, I'll wipe my phone and make sure I get rid of encryption this time..
kevinwu128 said:
That's my plan when I get home tonight. I want to flash the original firmware file my phone started with (I'm assuming it won't delete anything?) and then run through the root steps again.. if it doesn't work, I'll wipe my phone and make sure I get rid of encryption this time..
Click to expand...
Click to collapse
I think you will only lose stuff if you do a system reset after installing the original FW.
I only have had to do that on my tab S not my Edge after coming from a custom rom as I got slow down.
Resolved: flashed original rom and obtained root with cf-autoroot.
If someone has detailed instructions for magisk systemless root and xposed, it'd be much appreciated.. i want to have the option to use android pay or play pokemon go if i wanted. Thankyou

Can't Unroot S4?

So, i tried to Root my GF's I9506 with CF-Autoroot.
Safteynet fails and PokemonGo doesn't work, login problems.
I Unrooted trough SuperSU, restarted the phone a couple of times but PoGo still wont login.
She's on Stock Samsung Rom with Stock Recovery.
What can i do?
I was able to Re-Root with SuperSU for some reason. Had to update the binary tho. That's strange...
Shouldnt work if SuperSU unrooted in the first place?
Maybe it leaves files behind. If you're interested, there are ways to hide root from the game.
Anyway, the only sure way to remove root would probably be the flashing of a stock ROM.
Pwnycorn said:
Maybe it leaves files behind. If you're interested, there are ways to hide root from the game.
Anyway, the only sure way to remove root would probably be the flashing of a stock ROM.
Click to expand...
Click to collapse
Hmm. She really dosen't want to do a factory reset. so i guess i have to hide it then..
I think there are a few options i think all of them needs another recovery though:
Magisk + Magiskhide + phh
SuperSu, Suhide
Something called iSu.
Might it help to root again, remove anu "Su" files and folders trough ES Filexplorer? Then unroot from SuperSu?
If the phone is running a stock ROM, flashing a stock ROM usually leaves all of the data intact.
Dallebull85 said:
Hmm. She really dosen't want to do a factory reset. so i guess i have to hide it then..
I think there are a few options i think all of them needs another recovery though:
Magisk + Magiskhide + phh
SuperSu, Suhide
Something called iSu.
Might it help to root again, remove anu "Su" files and folders trough ES Filexplorer? Then unroot from SuperSu?
Click to expand...
Click to collapse
Removing any root file live might break root, which in turn won't let you remove any of the other files left.
Besides, you don't even know what files to look for.
Having a custom recovery won't affect her usage of the phone, nor the game. Besides, it gives you the benefit of making a Nandroid backup.
Ty for all the answers. So a custom Recovery doesn't trigger Saftynet?
Might as well install TWRP, backup and try to reflash stock rom from there.
Samsung Galaxy S4 International Qualcomm (jfltexx)
Samsung Galaxy S4 LTE Advanced i9506 (ks01lte)
Which one? i suppose its the 9506, flashhing my old CF-autoroot for my 9505(jfltexx) didn't work.
To flash a stock ROM, you need Odin, Samsung phone drivers, and the stock ROM from sammobile.com.
OK. But i'll do a backup on twrp first. Ty ty
Fixed it! Reflashed stock Rom with Odin and now Pogo works again!
Ty a lot for all the help. you guys are the best!

My approach to rooting 7.1.1

Hey all,
After my rooting experience with marshmallow, I used that with 7.1.1 and have had no issues. MODS: This was my approach to rooting 7.1.1. I apologize in advance for creating this thread if it's not necessary yet since XDA has given me so much help, I'm returning the favor.
NOTE: for those that want to roast me on this thread and/or flame me, don't do it. We are all noobs at one point or another. I have provided no links but have supplied the filename to the best in my capacity.
XDA gang,
After numerous attempts to root nougat, I tried this approach. This was the same approach I took w/ marshmallow.
I used Odin3_v3.12.3
selected 7.1.1 – look for filename j700tuvu3bqi5 NOTE: uncheck auto reboot. I do\did because in my experience, I encountered a boot loop.
after odin processes the flash, I disconnected the usb cable and did a battery pull.
Boot up your phone and let your phone build the recovery. After your phone reboots after the recovery, do a battery pull when the samsung splash screen starts to display itself.
Enter stock recovery and perform a cache, dalvik, and factory reset. Reboot from recovery.
Do a battery pull when the samsung splash screen starts to display itself. Boot back into download mode while holding volume down, home button, and power button. Let go of the buttons when the download mode screen comes up.
Use odin again and click on the AP button – select twrp_3.0.3-1_sm-j700t_23217. I found and downloaded this from XDA. Click start on odin and let odin do it thing. Disconnect the usb cable and do a battery pull.
Enter twrp recovery while holding volume up, home button and power button. Release buttons when twrp comes up.
Here, you will need to flash the latest supersu. I used v2.82-SR5. Also download no-verity-no-encrypt-ashyx.zip (big ups to ashyx for creating this)
Install these 2 files and reboot. NOTE: your phone will reboot twice – no cause for alarm.
After your phone boots up into nougat, go through the setup and reboot your phone.
After doing all of this, I've had zero issues. It may seem arduous but I found it necessary for my goal.
Did you have any issues with unlock screen lag on pin;/pattern?
There are reports and my own experience with this on a 7.0.0 version of otherwise identical process as yours to root. conclusion seems to be the no-verity-no-encrypt patch causes this, and that this patch (or something functionally identical) is integrated into supersu 2.82 versions.
edit - what model phone did you do this one? 7.1.1 not available for the j730g yet, unfortunately.
im on a320y , i got my phone suddenly custom binary blocked by frp lock,
then i reflash 7.0 stock firmware, i forgot how i rooted my device at the first time.
now im done with all the things, already rooted, but now im facing the unlock lag (especially when u are on secure lockscreen ex.pattern, password, etc)
this is very annoying, because there is no problem with unlocking screen when using fingerprint.
leo31 said:
im on a320y , i got my phone suddenly custom binary blocked by frp lock,
then i reflash 7.0 stock firmware, i forgot how i rooted my device at the first time.
now im done with all the things, already rooted, but now im facing the unlock lag (especially when u are on secure lockscreen ex.pattern, password, etc)
this is very annoying, because there is no problem with unlocking screen when using fingerprint.
Click to expand...
Click to collapse
caveat emptor, your results may differ drastically from mine, brick device, etc. but I did find a way around this
https://forum.xda-developers.com/apps/supersu/supersu-2-82-nougat-pin-pattern-unlock-t3764305
the issue is removing forced encryption, as far as the pattern unlock lag goes.
i have done this repeatedly on the a520f now and on a j730g/ds as well
DullPeon said:
caveat emptor, your results may differ drastically from mine, brick device, etc. but I did find a way around this
https://forum.xda-developers.com/apps/supersu/supersu-2-82-nougat-pin-pattern-unlock-t3764305
the issue is removing forced encryption, as far as the pattern unlock lag goes.
i have done this repeatedly on the a520f now and on a j730g/ds as well
Click to expand...
Click to collapse
can i flash the newest su while im still rooted? i mean, i dont want to reflash the whole rom again and again via odin.
and my superuser is from magisk manager. will it crash my system?
leo31 said:
can i flash the newest su while im still rooted? i mean, i dont want to reflash the whole rom again and again via odin.
and my superuser is from magisk manager. will it crash my system?
Click to expand...
Click to collapse
U should please educate yourself on what u got going on here..just some advice cuz......
SuperSu is SuperSU, either system wide root or systemless root.
Magisk is magisk, systemless root.
Seems like u rooted your device with SuperSu first, then installed magisk just a heads up SuperSu is obsolete now..and u do not need both. Use one or the other.. No matter, though, I would first make a nandroid backup. Next, I would go into SuperSu and select full system unroot. Next, reboot.go back to your magisk manager,it will say your device is not rooted. download and install through magisk, the magisk16.0 zip. Then it will do it's thing and install magisk and you will be rooted with magisk and have your root manager and magisk module manager. Magisk is like having SuperSu and Xposed all in one. So that's why I say to say goodbye to SuperSu and go all in with magisk. U can learn more that way too.
If u do not want magisk as root, I can't ponder why u wouldn't....just uninstall it. Then download whatever the latest SuperSu zip is. Boot to recovery and flash it. If there is any other updates no that magisk is gone, it will automatically update u with a notification and say yes to update SU binary. That's all.you are prob not getting it cuz magisk is in there too. So, u do not need that mess and remember to always make nandroid backups in twrp before anything where u may screw stuff up. I hope this helps and make sure to find out everything about anything with Android, before u do it.. good luck.
fullofhell said:
U should please educate yourself on what u got going on here..just some advice cuz......
SuperSu is SuperSU, either system wide root or systemless root.
Magisk is magisk, systemless root.
Seems like u rooted your device with SuperSu first, then installed magisk just a heads up SuperSu is obsolete now..and u do not need both. Use one or the other.. No matter, though, I would first make a nandroid backup. Next, I would go into SuperSu and select full system unroot. Next, reboot.go back to your magisk manager,it will say your device is not rooted. download and install through magisk, the magisk16.0 zip. Then it will do it's thing and install magisk and you will be rooted with magisk and have your root manager and magisk module manager. Magisk is like having SuperSu and Xposed all in one. So that's why I say to say goodbye to SuperSu and go all in with magisk. U can learn more that way too.
If u do not want magisk as root, I can't ponder why u wouldn't....just uninstall it. Then download whatever the latest SuperSu zip is. Boot to recovery and flash it. If there is any other updates no that magisk is gone, it will automatically update u with a notification and say yes to update SU binary. That's all.you are prob not getting it cuz magisk is in there too. So, u do not need that mess and remember to always make nandroid backups in twrp before anything where u may screw stuff up. I hope this helps and make sure to find out everything about anything with Android, before u do it.. good luck.
Click to expand...
Click to collapse
this is cool. your answer is helping me a lot. since i forgot how i rooted this device, i think i will remove my magisk manager first.
and i will see if my root is still working or not. if my device still rooted, so i will straightly flash newer SU.
but if it wont work, so i have to flash the newer SU too, right?
leo31 said:
this is cool. your answer is helping me a lot. since i forgot how i rooted this device, i think i will remove my magisk manager first.
and i will see if my root is still working or not. if my device still rooted, so i will straightly flash newer SU.
but if it wont work, so i have to flash the newer SU too, right?
Click to expand...
Click to collapse
Couple things buddy,
If u aren't rooted with magisk, which your magisk manager says rooted with magisk or rooted with SuperSu, uninstall magisk, then flash latest SuperSu zip.make sure to make backups in twrp.that is critical or u will be in bad shape if something goes wrong.and until u are better acquainted with Android , something very well may go wrong. If u are J700T, or J700T1 be sure to always flash the encryption break zip( no verity) which is posted on the ashyx twrp page.after flashing anything.always. there are more instructions under the j700t threads just click on any of our roms.make a nandroid in twrp first, that's a backup.then reboot. if u flashed SuperSu first u are rooted with it . So once uninstall magisk reboot, then u can just see if SuperSu app is functioning properly and shows root access granted on specific apps. Then go to recovery/twrp and flash latest SuperSu then encryption break zip(no verity). If u never did this before, chances are u never formatted after root or installing twrp and have to lose everything. After installing root or twrp u were supposed to go to twrp, wipe, format, "type yes" then flash root and encryption break zip, then reboot and set up phone. U can tell easily if in twrp it doesn't allow u to mount "data" and are unable to make a nandroid. If so don't bother with messing with anything root related till u format your phone, not factory reset, u select format, then type yes. Then flash SuperSu, and the encryption break zip. Once u do that re setup your phone. Then boot back to recovery and make a backup. That will flush magisk manger right out.
Sorry I know that's a lot but please read the j700T T1 threads. First pages of roms explain all this. Figure out if u have made nandroids and can even mount data first. Let me know what that status is. Then I can better help.
If u have done backups and flashed the encryption break zip before then follow above instructions and get rid of magisk or supersu.(this one is easy too, select full unroot) then leave magisk manager alone, go into it and select install magisk, it does it for u. Reboot after each system change. Then u will be rooted with magisk which is the current norm. SuperSu isn't what it once was the Creator retired and it's not anything special. Magisk is the future man. Good luck I hope this helps you.
---------- Post added at 03:59 AM ---------- Previous post was at 03:58 AM ----------
U don't have to flash only SuperSu to have root.magisk also roots your device, way better too
fullofhell said:
Couple things buddy,
If u aren't rooted with magisk, which your magisk manager says rooted with magisk or rooted with SuperSu, uninstall magisk, then flash latest SuperSu zip.make sure to make backups in twrp.that is critical or u will be in bad shape if something goes wrong.and until u are better acquainted with Android , something very well may go wrong. If u are J700T, or J700T1 be sure to always flash the encryption break zip( no verity) which is posted on the ashyx twrp page.after flashing anything.always. there are more instructions under the j700t threads just click on any of our roms.make a nandroid in twrp first, that's a backup.then reboot. if u flashed SuperSu first u are rooted with it . So once uninstall magisk reboot, then u can just see if SuperSu app is functioning properly and shows root access granted on specific apps. Then go to recovery/twrp and flash latest SuperSu then encryption break zip(no verity). If u never did this before, chances are u never formatted after root or installing twrp and have to lose everything. After installing root or twrp u were supposed to go to twrp, wipe, format, "type yes" then flash root and encryption break zip, then reboot and set up phone. U can tell easily if in twrp it doesn't allow u to mount "data" and are unable to make a nandroid. If so don't bother with messing with anything root related till u format your phone, not factory reset, u select format, then type yes. Then flash SuperSu, and the encryption break zip. Once u do that re setup your phone. Then boot back to recovery and make a backup. That will flush magisk manger right out.
Sorry I know that's a lot but please read the j700T T1 threads. First pages of roms explain all this. Figure out if u have made nandroids and can even mount data first. Let me know what that status is. Then I can better help.
If u have done backups and flashed the encryption break zip before then follow above instructions and get rid of magisk or supersu.(this one is easy too, select full unroot) then leave magisk manager alone, go into it and select install magisk, it does it for u. Reboot after each system change. Then u will be rooted with magisk which is the current norm. SuperSu isn't what it once was the Creator retired and it's not anything special. Magisk is the future man. Good luck I hope this helps you.
---------- Post added at 03:59 AM ---------- Previous post was at 03:58 AM ----------
U don't have to flash only SuperSu to have root.magisk also roots your device, way better too
Click to expand...
Click to collapse
i think the lag while unlocking screen is caused by dm-verity.zip file which i flashed straightly after installing twrp.
leo31 said:
i think the lag while unlocking screen is caused by dm-verity.zip file which i flashed straightly after installing twrp.
Click to expand...
Click to collapse
No, that same dm verity zip has been used since marshmallow and the unlock lag is a nougat bug. All that zip does is disable encryption so u can access data. And thus allow mounting of internal.
fullofhell said:
No, that same dm verity zip has been used since marshmallow and the unlock lag is a nougat bug. All that zip does is disable encryption so u can access data. And thus allow mounting of internal.
Click to expand...
Click to collapse
this is the 2nd time i root my device.
the first time i rooted my a3, i didn't face any lag and never laggy while unlocking screen.
but the problem is i forgot how i rooted it. which files did i flashed. which tutorial did i follow.
but no problem so far , because the fingerprint unlock does not give any lag.

MAGISK 16.0 flash problem in moto g4 plus

Hey everyone,
I tried installing magisk 16.0
firstly i did ,
unlocked bootloader,
then installed twrp recovery 3.2.1
booted the phone installed magisk manager,
then again in twrp recovery
i tried flashing the magisk 16.0,the magisk gets flashed but the phone does not boot up to system,
i dont get what mistake i am doing,
i want to use the 'CAMERA2 API' on my moto g4 plus,
and nothing else
But they say you need to root for that,
so i am trying
Please help me with this...
You need to flash a custom kernel (ElementalX) before rooting your device when using stock firmware.
In addition to thorin0815's message, you cannot root on the stock Motorola kernel - attempting to root on the hudsoncm kernel causes bootloops. You may be able to reboot to TWRP, restore your TWRP backup (you did make a backup, right?) then flash ElementalX, then magisk. If you're still bootlooping, you may have to re-flash the stock ROM then try again.
thorin0815 said:
You need to flash a custom kernel (ElementalX) before rooting your device when using stock firmware.
Click to expand...
Click to collapse
Thankyou I'll try this also..
echo92 said:
In addition to thorin0815's message, you cannot root on the stock Motorola kernel - attempting to root on the hudsoncm kernel causes bootloops. You may be able to reboot to TWRP, restore your TWRP backup (you did make a backup, right?) then flash ElementalX, then magisk. If you're still bootlooping, you may have to re-flash the stock ROM then try again.
Click to expand...
Click to collapse
Is this the convenient way or shall I use the apps like one click rooting ? Kingroot something..?
PushkarajK said:
Is this the convenient way or shall I use the apps like one click rooting ? Kingroot something..?
Click to expand...
Click to collapse
I'm not sure if king root or the one click root would work, if they don't flash the custom kernel first you'd be back with a non booting device. Best to flash root yourself, that way you'll also learn the process too
echo92 said:
I'm not sure if king root or the one click root would work, if they don't flash the custom kernel first you'd be back with a non booting device. Best to flash root yourself, that way you'll also learn the process too
Click to expand...
Click to collapse
Yes got it ,thankyou for the help:good:

Categories

Resources