OKAY here we
my mate 9 boot was locked and i was going to unlocked in official website and i was getting error error over and over again
no one told any one anywhere that we have 2 EMUI 5 OK? how we have old phone who come from emui4 and
upgraded to emui5 and the new one like mate 9 who is installed by company emui5 okay
here we go
when you enter official web site no need for chines lang just login and go to unlocking bootloder
then in the top click second EMUI5 wich says since EMUI5 do you not enter (BEFORE EMUI5) thats for old huawei
then put your serial then imei then product ID thats it boom 5 second you get password or lets say unlock cod
...... ht tp://emui.huawei.com/en/plugin/hwdownload/download........
please if you dont understand feel free to ask any question :good:
I can confirm that this works! Thank you so much
How do I get to the official website
robbase823 said:
How do I get to the official website
Click to expand...
Click to collapse
http://emui.huawei.com/en/plugin/hwdownload/download
Okay so i'm gonna try to clear up the steps mentioned above:
1. Go to this website http://emui.huawei.com/en/plugin/hwdownload/download
2. Click the "Unlock bootloader" which can be found under Search for a model
3. It should bring you to the Unlocking Agreement and read it if you want
4. It should bring to a page asking you to provide the information for your phone and you have to change the "Before EMUI5.0" to "Since EMUI5.0" this is really important
5. Fill out the rest and you should get your unlock code within seconds after committing it. Note: it does takes a couple of seconds for the code to come up after you press Commit
It works!!!
i think it's just the same with this one:
https://forum.xda-developers.com/mate-9/how-to/guide-how-to-bootloader-unlock-code-t3557808
domon07 said:
i think it's just the same with this one:
https://forum.xda-developers.com/mate-9/how-to/guide-how-to-bootloader-unlock-code-t3557808
Click to expand...
Click to collapse
Well it essentially is but i tried that method first and couldn't figure it out and then I found this thinking it would be the same problem but it wasn't. This was actually easier
hi, I try to unlock my bootloader with the code I received from huawei.
oem unlocked in dev options but have always the same message with fastboot command....
wrong password.. failed! I'm on MHA-L29C432B156
any idee?
druun said:
hi, I try to unlock my bootloader with the code I received from huawei.
oem unlocked in dev options but have always the same message with fastboot command....
wrong password.. failed! I'm on MHA-L29C432B156
any idee?
Click to expand...
Click to collapse
go and check again if its right from official website do the same process and ask for password
open Command and make sure your devices is on fastboot by typing ( fastboot devices )
it should show fastboot
after type like that ( fastboot oem unlock xxxxxxxxxxxxxxxx ) type your password it should be 16 mix number
thats it
if you did all this and did not work email huawei by ( [email protected] ) and type everything your serial numer .imei . your email screen shot of wrong password they need all info and they answer like after 15h or lets say 24h
druun said:
hi, I try to unlock my bootloader with the code I received from huawei.
oem unlocked in dev options but have always the same message with fastboot command....
wrong password.. failed! I'm on MHA-L29C432B156
any idee?
Click to expand...
Click to collapse
Did you request the booloader code with this option enabled "Since EMUI5.0"????'...
ok.. tx.. I will try... they give me 2 times the same password so I think it's right.
when I type fastboot devices I see my mate 9,also when I type fastboot reboot he reboot..
I have to write to huawei..
TX for all
Phariex said:
Did you request the booloader code with this option enabled "Since EMUI5.0"????'...
Click to expand...
Click to collapse
yes..
---------- Post added at 08:39 AM ---------- Previous post was at 08:23 AM ----------
I also ask the bootloader code via hicare chat and it's the same code that I get via huawei web site.
so I think that the code is the good one.
I had many phones, always unlocked and rooted but the mate 9 is a bad phone for that.
the best way is to sell it and buy a new one.. ?
just to say that I used dc unlocker.. bootloader unlocked.. great..
Related
UNLOCK YOUR BOOTLOADER
WARNING: UNLOCKING YOUR BOOTLOADER VOIDS YOUR WARRANTY.PROCEED AT YOUR OWN RISK.
NOTE: Unlocking the bootloader will Wipe/ factory reset your device, and will delete all personal data from your device such as apps, photos, messages, and settings.
INSTRUCTIONS:
Make sure to take a backup of your entire device data.
Download the Android SDK OR Download the Minimal ADB and Fastboot
Install the latest Motorola USB Drivers on your desktop. Download here.
Put your device in fastboot mode (power off, then press the power and volume down buttons simultaneously).
Open Command Prompt on androidsdk/platform-tools/ (Hold Shift and right click and press open command window here)
Connect your Phone to PC
Type this in the CMD prompt window - fastboot oem get_unlock_data
You will get a return string. Copy it. [Right Click-Mark- Mark the text by pressing the shift key-Now press Ctrl+C]
Paste all the lines together in a notepad. Remove the empty spaces.
Now go to the Motorola Site.Sign in using your Google account or Motorola ID. Scroll down the page and paste the copied string in the field at step #6. Then click on ‘Can my device be unlocked?’, after which a "REQUEST UNLOCK KEY" button will appear at the bottom of page.
To get your unlock key, select the ‘I Agree’ option. Note: You will receive an email with your Unlock Key at the email address you used to log in there.
Important – Copy the 20-character key that Motorola sent you via email. Make sure your device is connected.
Then in CMD type: fastboot devices (To check your device is connected)
Then type: fastboot oem unlock UNIQUE_KEY
NOTE: In above command, replace the word ‘UNIQUE_KEY’ with the unlock code that you got via email. Then hit enter and the unlocking process should begin. Wait for a while and soon you’ll see ‘Bootloader Unlocked’ warning on your Moto G(2nd Gen).
To relock the bootloader:
Go to Fastboot and give the command fastboot oem lock
You can always appreciate my work by pressing the Thanks Button.:good:
Good Day
XDA:DevDB Information
Bootloder Unlocking For the Moto G (2nd Gen), ROM for the Moto G 2014
Contributors
Falcon G
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-11-13
Last Updated 2014-11-13
Reserved
[SIZE=+1]Q1:How to remove the unlocked bootloader message? [/SIZE]
Download the zip.Mirror
Dropbox
Extract all the files
Reboot to fastboot mode (power + vol down)
Now open cmd and use cd command to go to the directory where you placed the file.
Now Type the command: fastboot flash logo logo.bin
Reboot from the recovery (use vol up to select and vol down to navigate)
Now your bootlogo should be restored back to the normal version
ORFlash the zip via TWRPThanks rafaelbrunner for the zip
[SIZE=+1]Q2: Does unlocking the bootloader wipe/factory reset my phone? [/SIZE]
Yes it does. Please make a backup of all your apps and data as it will be completely erased.
Reseved---2
Will this be expected to work on the carrier versions?
ZeroAlphawolf said:
Will this be expected to work on the carrier versions?
Click to expand...
Click to collapse
For the G yes most probably. But for the X only pure edition.
Falcon G said:
For the G yes most probably. But for the X only pure edition.
Click to expand...
Click to collapse
Bro i am not able to relock the bootloader
CMD says (Do fastboot oem lock begin first)
So i just executed this command (mfastboot.exe oem lock)
In phone it says cannot lock bootloader sst error
Hi
Relocking bootloader will give back the guarantee?
rodrigo82 said:
Hi
Relocking bootloader will give back the guarantee?
Click to expand...
Click to collapse
I am wondering the same..I am in europe.
rodrigo82 said:
Hi
Relocking bootloader will give back the guarantee?
Click to expand...
Click to collapse
andrewk2x said:
I am wondering the same..I am in europe.
Click to expand...
Click to collapse
Nope, it will not give you back your warranty...
Sent from my XT1068 using XDA Free mobile app
rodrigo82 said:
Hi
Relocking bootloader will give back the guarantee?
Click to expand...
Click to collapse
andrewk2x said:
I am wondering the same..I am in europe.
Click to expand...
Click to collapse
In Europe locking bootloader will give back the warranty
Q11: Does rooting/unlocking your phone invalidate its warranty? (In EU)
In short: No. Just the fact that you modified or changed the software of your device, is not a sufficient reason to void your statutory warranty. As long as you have bought the device as a consumer in the European Union.
For Indian customers, The warranty is void if you unlock/root your device. Motorola also reserves the right to maintain the records of unlocked bootloader devices. So you may not even get the warranty by relocking the device
[source]
Motorola is giving error message as ünknown error" and know key has been sent on my email id....what to do now?
---------- Post added at 10:34 PM ---------- Previous post was at 10:24 PM ----------
I followed the steps but when i press the request unlock key button on motorola website...I get the message as "UNKNOWN ERROR" and no key is sent on email id....what to do guys...please help
prateek.khurana31 said:
Motorola is giving error message as ünknown error" and know key has been sent on my email id....what to do now?
---------- Post added at 10:34 PM ---------- Previous post was at 10:24 PM ----------
I followed the steps but when i press the request unlock key button on motorola website...I get the message as "UNKNOWN ERROR" and no key is sent on email id....what to do guys...please help
Click to expand...
Click to collapse
Double check your string for any space.first copy string to a notepad then remove all space.
Related to unlocking: is it normal that after unlocking it's not possible to boot into stock recovery?
By the way, I read in other threads that locking the bootloader again requires alterations to firmware (like rooting) to be undone first, otherwise locking is rejected. If true, it might help to add this remark to the info above.
jheller said:
Related to unlocking: is it normal that after unlocking it's not possible to boot into stock recovery?
By the way, I read in other threads that locking the bootloader again requires alterations to firmware (like rooting) to be undone first, otherwise locking is rejected. If true, it might help to add this remark to the info above.
Click to expand...
Click to collapse
unlocking simply does not mess up with your recovery.
To lock again, yes you'll need to do full unroot.
Falcon G said:
unlocking simply does not mess up with your recovery.
To lock again, yes you'll need to do full unroot.
Click to expand...
Click to collapse
Found out as well: recovery requires special keypress to enter, see this thread: http://forum.xda-developers.com/showthread.php?p=55966489
Unable to unlock the bootloader for a Moto G bought in Bestbuy
Is anybody able to do that? If yes, please help. The motorola website said that the phone I bought from Bestbuy didn't qualify to unlock its bootloader.
What can I do with the phone if I cannot unlock the bootloader?
dxxvi said:
Is anybody able to do that? If yes, please help. The motorola website said that the phone I bought from Bestbuy didn't qualify to unlock its bootloader.
What can I do with the phone if I cannot unlock the bootloader?
Click to expand...
Click to collapse
after you paste in the window scroll thru and make sure no spaces like i had. ONE space give me a no-go!
---------- Post added at 03:40 AM ---------- Previous post was at 03:37 AM ----------
jheller said:
Related to unlocking: is it normal that after unlocking it's not possible to boot into stock recovery?
By the way, I read in other threads that locking the bootloader again requires alterations to firmware (like rooting) to be undone first, otherwise locking is rejected. If true, it might help to add this remark to the info above.
Click to expand...
Click to collapse
unlocking bootloader only does that and nothing else, now if you go installing customs roms, root and so on. you have to re-install your system fresh and clean like a widdle baby's bottom after mommy has cleaned it
Notice: A New Q & A thread has been created in the Q&A, Help & Troubleshooting Sub-Forum.
Posts from members with less than 10 posts will automatically be posted there.
Please check it out, and see if you can help out someone with a question about this Topic.
sd_shadow said:
Notice: A New Q & A thread has been created in the Q&A, Help & Troubleshooting Sub-Forum.
Posts from members with less than 10 posts will automatically be posted there.
Please check it out, and see if you can help out someone with a question about this Topic.
Click to expand...
Click to collapse
@Falcon G or others who can help
Do I need to flash a custom recovery for root my device ? After unlocking the bootloader I can't flash supersu with the stock recovery ?
Thanks in advance
To root your Sony X Performance phone ( I have the F8132 ) You must do this procedure till maybe in the future there is another method.
Unlock bootloader on Xperia X Performance
1) download the ADB-drivers utility here that you will need to install the drivers which enable flashmode to work on your pc. You will also need the Sony Performance X driver so your computer will connect to it properly here
2) Go here to download Android Studio Software which allows you to pen a cmd line and program the phone in flashmode. To save you lots of time and trouble, again, my instructions are much better and help you navigate to the places you need to be so this goes well. Disregard the Sony instructions because you will most likely ask yourself many questions and will not find answers.You will need to properly install the Android studio software to get it working the way you need. Upon install, check off Android SDK and Android Virtual Device. Click next. It takes a while to install. Open the software after it has been installed. It will tell you " No Android SDK found. Click next. Click next again to install the two prechecked updates which are Android SDK Platform and API25" ANdroid 7.1.1 (Nougat). Then click finished to start the install of those 2 updates. It will download files from the internet. This will take a while. Click inish when its done downloading. At the welcome window of Android Studio click on the "configure" button. Choose SDK Manager. There will be 3 tabs at the upper midline of the window. Choose the "SDK Tools" tab. Check off "Google USB Driver and Google Web Driver. Usually these drivers will not work to get your phone in fastboot mode. This is why I have instructed you to install the Flashtool-
drivers utility. Nonetheless, click on these and click on apply. Click accept the click next to download and install this update. Click finish after it has installed then click ok to close the software.
3) On your device, turn on USB debugging and turn on OEM Unlocking by going to Settings, then about phone. Go all the way down to build version and tap on it about 7 times. This will unlock Developer Options menu. To go into Developer Options once it is unlocked goto Settings, then Developer options . This menu is where you must turn on usb debugging and OEM Unlocking to proceed with the procedure.
4) After you have turned on usb debugging, turn your phone off. After its turned off, hold the volume down button while plugging the phone into your pc. Your computer should install drivers that will enable Flashmode.
5)Go here to have Sony give you the unlock code. Input your email address to get the code emailed to you with instructions. It takes just a minute to get the unlock code. DO NOT attempt
to unlock your bootloader with some other method. Odds are its a scam or virus or both and you will be screwed. Follow the steps to get the unlock code by putting in your IMEI
then you are suggested to follow my steps to unlock the bootloader. Keep the Sony page open for reference because once it is closed, you will have to redo the email process and
IMEI process again to get the same code. Youre unlock code never changes.
6) goto the file location C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools where you will open a cmd prompt you must open a cmd prompt in only this folder to make this work. to do so , once in that specific folder
hold down your right mouse button and clock on the shift key then release the mouse button. This will open a pop up window where you can choose to " open command window here"
7) when the cmd window opens, copy and paste this "fastboot devices" directly AFTER the ">" symbol and paste it in the command line with no spaces. It should look lik this.
.........C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot devices.........
8)press enter button, your computer should respond in the cmd line with something that looks like this
......CB512A697c fastboot.......
This lets you know that your phone is in the correct mode and ready to be programmed.
9) to unlock your bootloader you then copy and paste directly the cmd code Sony gives you from there website "fastboot -i 0x0fce oem unlock 0XXXXXXXXXXXX" . It will look like this C:\Users\PC-User\AppData\Local\Android\sdk\platform-tools>fastboot -i 0x0fce oem unlock 0xxxxxxxx... The 0xxxx's are YOUR SPECIFIC Unlock code given to you by Sony. DO NOT get this from another other website or software otherwise you will probably be infected with some kind of virus of worse on your phone or computer.
10) press enter to intiate bootloader unlock procedure
11) once bootloader unlock is successful you will see the cmd line spell out this "OKAY [ 1.165s] finished. time: 1.168s" The seconds mean nothing. You do want it to say OKAY!
12) reboot the phone and you will see an annoying warning that cant be undone, which says " your device has been unlocked and cant be trusted" No big deal but very annoying. The phone will work but you will see this everytime you reboot the phone.
13) It takes a while, several minutes, maybe 5, to have the phone bootup. When it does, you will see everything is in a weird language. You need to choose which language you want. to know which menu you must choose, just click on the very first down pointing arrow in the middle of the screen. A menu pops up and you can then choose the language you want. After choosing a language clock ok. Youre done!
Instructions to install TWRP so you can backup and restore your phone here
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
KWOKSFUNG said:
Thanks for the help, however I get this in the command screen
FAILED (remote: Command not allowed)
I do not get this phone from carrier, and have unlock bootloader allowed = yes , why would this happen to me
edit: everything is fixed now, only problem left is I'm stucked at MM
Click to expand...
Click to collapse
Maybe try Flashtool
ontwerp said:
Maybe try Flashtool
Click to expand...
Click to collapse
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
KWOKSFUNG said:
I've fixed this problem now
however just flashing the ftf normally wont help
u have to flash the ftf with exclude system.sin
then flash system with system.img
whoever want the system.img can just ask me
Click to expand...
Click to collapse
Can I have your FB/line? Thankss
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
loveyoulovemetn said:
Can I have your FB/line? Thankss
Click to expand...
Click to collapse
PM
dont worry about flashing nougat though, flashing ftf normally will work now on updated flashtool
evildog1 said:
I don't have X performance yet but I wanna ask a quick question: Will it lose its DRM key and lose camera quality after unlocking bootloader like the older models?
Click to expand...
Click to collapse
bump this question as I think the answer is "Yes, it will lose"
huangjs said:
bump this question as I think the answer is "Yes, it will lose"
Click to expand...
Click to collapse
Damn then i'll wait until someone found root exploit.
evildog1 said:
Damn then i'll wait until someone found root exploit.
Click to expand...
Click to collapse
I saw on gfan DRM key can be "regenerated".
However, it's not the one you had before unlocking.
But who cares as long as it will let Sony engine works.
Unlocked bootloader allowed NO!
Is there a Root trick for the Device Lock Bootloader?
I use SOFTBANK series (DOCOMO).
hi guys. i was unlocking the bootloader of moto x style (Dual sim) XT-1572 model. i done everything properly until i got the below error
(Bootloader) fastboot oem unlock currently disabled !
Failed
Finished
(image attached). what i did wrong ????? need help....
predator83 said:
hi guys. i was unlocking the bootloader of moto x style (Dual sim) XT-1572 model. i done everything properly until i got the below error
(Bootloader) fastboot oem unlock currently disabled !
Failed
Finished
(image attached). what i did wrong ????? need help....
Click to expand...
Click to collapse
Go to settings
Developers option (if u dont find it go to about phone and tap 5-6 times on build no )
Then u will see the developers option in the settings
Enable oem unlocking and also enable android debugging
This is the main reason behind it oem unlocking is disabled
Sagar_1401 said:
Go to settings
Developers option (if u dont find it go to about phone and tap 5-6 times on build no )
Then u will see the developers option in the settings
Enable oem unlocking and also enable android debugging
This is the main reason behind it oem unlocking is disabled
Click to expand...
Click to collapse
done it before booting to fastboot mode.
predator83 said:
done it before booting to fastboot mode.
Click to expand...
Click to collapse
Did u activate oem unlocking also??
In the bootloader, what are the two lines under the green "Battery OK" line? Should be something like...
Device is LOCKED. Status Code: 0
Software status: Official
Also please attach output of 'fastboot getvar all'
its mentioned under battery ok line.
Device is Engineering
Software Status: Official
predator83 said:
its mentioned under battery ok line.
Device is Engineering
Software Status: Official
Click to expand...
Click to collapse
You can't unlock an Engineering status bootloader. Your device was repaired and shipped out incomplete, not the first one we have seen... You need to contact Moto support, there is a thread in the official forums about this bootloader state, it's kind of a partial unlock but it's uses for factory flashing in a different way than we do it.
How do you get an unlock code? Site seems broken due to the EMUI 5 landing page.
Second that.
Huawei's site works now. https://emui.huawei.com/en/plugin/unlock/index
Tap About tablet 10 times
Enable USB debugging and OEM Unlock in developer options
Install minimal ADB and fastboot
Get an unlock code from that page
From a command prompt type:
Code:
adb reboot bootloader
Then from the command prompt type:
Code:
fastboot oem unlock INSERTYOURUNLOCKCODEHERE
Ok, I'm trying to use the link above to unlock my tablet. I've updated to EMUI 5.0. When I go to the unlock site, the first question is about which version of EMUI you have. If you put in "Before EMUI 5.0", you can choose either "Smartphone" or "Tablet". If you put in "Since EMUI 5.0", the only choice is "Smartphone". So, either answer doesn't seem to be correct. Does anybody know which option I should use?
I have the same problem. Maybe we should contact the support? If i fill the form, there is an error message, that the informations are not correct. I have tested different methods, for example switching to the chinese Site, three different browsers, other countrys, but it didn't worked. Could it be that the wifi Version is not supported at the moment, because of bricks-danger? Other users in my country have created manuals that seems to work but if i try it, i can't receive the bootloader code. That's the first step to root the device and we are failing here. ^^
https://emui.huawei.com/en/plugin/unlock/index no longer works (it leads to a 404 error). Do you know if there is a new url for obtaining an unlock code?
I wonder the same. I get a404 error
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
bigmikey307 said:
I am trying to unlock my bootloader. I finally received my unlock token from OnePlus but for some reason i cant unlock the device. i have the unlock-bin file in the same folder as adb, i have usb debugging on, my device is in fastboot mode, but i keep getting this error (see attached picture). Can someone please help? Also, does unlocking the bootloader factory reset the device?
Click to expand...
Click to collapse
Replace <unlock_token.bin> with the ACTUAL unlock token you got.
Yes, unlocking bootloader wipes the phone.
There are multiple forums on this.
While the phone is plugged in to the PC reboot it to fastboot again leaving it plugged in. ( Make sure you selected OEM unlock in developer options)
I managed to get it to work by using the ALL IN ONE tool
Just give the command, and drag and drop the unlockbbin. Should look like this: fastboot flash cust-unlock 23857363fbsndhdnd.bin. {for future reference, i have to reuse a couple times a week
Not unlock.bin
bigmikey307 said:
I managed to get it to work by using the ALL IN ONE tool
Click to expand...
Click to collapse
how bro can u explain ?
Same problem here
I think I've been out of the game for too long........ I was just too embarrassed to post the same question , ha! Well, at least the first part of the OP's question, about having the token in the correct path and it producing an error. If there's a step by step command by command walk-thru out there, I'd be grateful for the link. And yes I know how a search bar works, but all of the guides or whatever you want to call them seem to be missing a few steps....... Or maybe I should just go back to eating my butterscotch and yelling at kids to stay off my lawn ?