Related
Hi to everyone , I connected my phone via usb to my computer and from my fault i deleted internal sd memory data and now phone wont boot , what should i do now ? . Thnx for your time ...
So many views and none can help or answer ??
You haven't provided enough information. What exactly have you deleted? The contents of the bootloader (pink screen)? Or the actual contents of the SD card?
I delete all data and partitions from internal sd /memory , for example it has 2GB internal sd and 512 RAM when i did that , it had 4GB but when i unplug it from pc wont boot after that.
Did you try to do this: http://android.modaco.com/topic/341374-custom-you-data-partitions-size/ ??
Can you still go into recovery mod?
If not, then you need to go into bootloader (hold Vol+,Vol- and Power until the screen turns pink), connect the usb cable and tell me what files you have in the "image" folder.
If you can boot into recovery mod(hold Vol+ and Power), then from Recovery Mod go to mount and storage, mount the sd card and copy a custom Rom (this should do http://forum.xda-developers.com/showthread.php?t=1147103) in the root directory, then go to install zip from Sd card and select the zip that contains the Rom.
Let me know how you go.
I cant go into recovery mod and bootloader because phone dont start or boot , even if i connect it to pc cant read sd card , i think from deleting all this , phone lost all os and now it need to send it to huawei to reinstall it or ??
Recovery.img is located in the bootloader, that memory is not accessible from Recovery or any other tool...In less you actually deleted the files from bootloader (pink screen).
If nothing happens when you hold VOL+,VOL- and Power, then send it back to warranty.
i switched my phone off,then on and it get stuck on the ideos animated screen..
i removed the battery,then turned it on but still,then i tried to hard reset with +-power,i got a pink screen,i removed the battery again(couldnt turn it off)and then i turned it back on,it again got stuck on loading screen...I havent any roms installed,i have rooted it thogh,what's wrong? does rooting,void warranty?
So you can boot to bootloader mode(you can exit from this mode only if you remove battery). Then you can flash again the rom. Try to find an official rom, better the rom that device has before, if you know which you had. In rom's zip file there is a folder called dload. Put this folder on the external sd card, boot to bootloader and the installation will begin automatic.
do i need to have the sd card formatted or it doesnt matter?
i go to recovery mode,i connect the phone to the pc,i rename the original recovery.img to .bak,copy the recovery image(clockwork),dissoconnect the phone from pc,remove battery,enter recovery mode but yet again i get the pink screen....What am i doing wrong?
by the way i have the sd card removed.
I don't know what you have done, but you don't need the recovery to flash a stock rom.
You don't need to format sd card also, just put the dload folder on root of your sd.
If you successfully flash the stock rom it will put all files in the right place, so after you can root the device and replace the stock recovery with a custom one.
i installed a custom rom but still after reboot,the phone stays on log screen(ideos animated)...
So, you have a completly different situation from the user created this thread. You should make a new thread or mentioned here, beacause this lead to confusion.
I think that accidentaly you pushed both vol buttons and for this bootloader mode appears.
Try to use adb or an app for this(QtADB, android commander, Ultra ADB gui) to be sure and to avoid to use the button combination. Of course you need to connect device with adb for this. You can do it from windows command prompt too, by writing adb shell -> reboot recovery.
If you stack at animated screen try to do wipe data/factory reset and wipe cache first. The first boot maybe delay before it gets you to the home screen.
recovery.img change
I need help with this also
I have nothing in my folder at all??
What should i do??
Thanks
katu2006 said:
Did you try to do this: http://android.modaco.com/topic/341374-custom-you-data-partitions-size/ ??
Can you still go into recovery mod?
If not, then you need to go into bootloader (hold Vol+,Vol- and Power until the screen turns pink), connect the usb cable and tell me what files you have in the "image" folder.
If you can boot into recovery mod(hold Vol+ and Power), then from Recovery Mod go to mount and storage, mount the sd card and copy a custom Rom (this should do http://forum.xda-developers.com/showthread.php?t=1147103) in the root directory, then go to install zip from Sd card and select the zip that contains the Rom.
Let me know how you go.
Click to expand...
Click to collapse
-DELETED-
IcyTiger said:
Hi to everyone , I connected my phone via usb to my computer and from my fault i deleted internal sd memory data and now phone wont boot , what should i do now ? . Thnx for your time ...
Click to expand...
Click to collapse
man i have the same problem how did your go ...?
It is as follows:
I installed a rom where the mobile phone at the end of the installation not started already, was stuck on the logo of Huawei.
So I downloaded a stock rom (after extracting and so) put the dload folder on the SD card, as is done ....
So when I went to the pink screen to start the update, I connected to the pc normally and nothing ...! Just keep in pink screen!
I suspect it's a driver on the pc, but I can not see ....
The drivers 'android updater' do not install!
It was supposed (i3.ytimg.com/vi/Nu1TYdJdv18/maxresdefault.jpg) happen, but not!
Help please! :crying:
are you sure you have right files? you must have a dload folder on ROOT of sd card.
try redownloading from here: http://www.mediafire.com/download/c97gnolbh9759y7/dload.zip
this is where i download every time i flash stock rom
If you are using forumber's partition, you have to return to stock partition
Hello
I have a similar problem.
I was trying to install [ROM] [4.2.2] [Version 12] CyanogenMod 10.1 with this instruction:
Installation:
Use only Forumember partition.zip.
1. Copy package to SD card
2. Boot to recovery
3. Full wipe (data, cache, dalvik,)
4. Format /system, /data, /cache
5. Reboot recovery
6. Install pacakges
7. Reboot!
But installation was not completed.
Now I can't enter to RECOVERY (power on + vol not works).
What I should to do? Return to stock partition? Help please
digit4l_pl4yer said:
Hello
I have a similar problem.
I was trying to install [ROM] [4.2.2] [Version 12] CyanogenMod 10.1 with this instruction:
Installation:
Use only Forumember partition.zip.
1. Copy package to SD card
2. Boot to recovery
3. Full wipe (data, cache, dalvik,)
4. Format /system, /data, /cache
5. Reboot recovery
6. Install pacakges
7. Reboot!
But installation was not completed.
Now I can't enter to RECOVERY (power on + vol not works).
What I should to do? Return to stock partition? Help please
Click to expand...
Click to collapse
The instructions are not correct there. Please tell what happened when you were flashing the partition.zip?
after that I installed original HUAWEI U8800 Android 2.3 for beta.
Now I have only HUAWEII logo ;(
I have the correct dload, but the drivers on my pc are not well when connectin during pink screen...
There is the img of drivers and i can't find them anywere!
Was suppose to, during pink screen, plug the phone to pc and the update just start, but nothing! The pink screen stills there and no update
pl4t!n said:
If you are using forumber's partition, you have to return to stock partition
Click to expand...
Click to collapse
But i can't go to the CWM, just pink screen and Huawei's logo stuck
Miguel510 said:
But i can't go to the CWM, just pink screen and Huawei's logo stuck
Click to expand...
Click to collapse
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
rqmok said:
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
Click to expand...
Click to collapse
When i try it just can't...
When going to pink screen and plugin the USB, the PC just can't install the drivers it says that are with errors and the drivers are missing as you can see in picture the i uploaded.
Just can go to pink screen, when going to CWM the phone stucks in Huawei's logo.
When in pink screen, the update just didn't start, even when plug the device to the PC and even doing what you said...
I think my problems are drivers!
I have Windows 7 - 64bits
And see the pics i uploaded....
rqmok said:
OK. Get a clean sdcard, or format your current one (backup your data first), and put the dload folder onto your sdcard. Now, remove the battery from the phone and insert the sdcard with the dload folder into your phone. Connect your phone's cable to your phone, and the USB end into a computer. It should start installing the firmware in your dload folder. Report your results please.
Click to expand...
Click to collapse
I use this solution, and now I have:
Phone starts in recovery <3e>
What I should do? Help please.
digit4l_pl4yer said:
I use this solution, and now I have:
Phone starts in recovery <3e>
What I should do? Help please.
Click to expand...
Click to collapse
Change the recovery image...
Root and change recovery image.
Didn't work with me!!!!
*see, gmationL
Thx for info. Where I can find this solution?(step by step)
Miguel510 said:
When i try it just can't...
When going to pink screen and plugin the USB, the PC just can't install the drivers it says that are with errors and the drivers are missing as you can see in picture the i uploaded.
Just can go to pink screen, when going to CWM the phone stucks in Huawei's logo.
When in pink screen, the update just didn't start, even when plug the device to the PC and even doing what you said...
I think my problems are drivers!
Click to expand...
Click to collapse
It should have started updating automatically. Please check that on the root of your sdcard you have dload folder, and inside the dload folder you have UPDATE.APP. If that's already there, it could be that the sdcard is not able to mount.
---------- Post added at 02:27 AM ---------- Previous post was at 02:21 AM ----------
digit4l_pl4yer said:
Thx for info. Where I can find this solution?(step by step)
Click to expand...
Click to collapse
If you are able to go to pink screen then try installing official android 2.3
Thanks for answer.
After installing and rebooting on screen was info:
(logo recovery) formatting cache/ formatting data
Now I have only HUAWEI logo
Maybe problem is in forumber's partition?
How can I back to stock partition?
digit4l_pl4yer said:
Thanks for answer.
After installing and rebooting on screen was info:
(logo recovery) formatting cache/ formatting data
Now I have only HUAWEI logo
Maybe problem is in forumber's partition?
How can I back to stock partition?
Click to expand...
Click to collapse
You can only flash the stock-partition.zip with a custom recovery. I think you need to try to mount the pink screen on your computer and install the custom recovery from there.
When I connect phone (in pink mode) to the computer I have:
I install Huawei_U8800_ICS_ADB_Driver_(MTP) but still not works
digit4l_pl4yer said:
When I connect phone (in pink mode) to the computer I have:
I install Huawei_U8800_ICS_ADB_Driver_(MTP) but still not works
Click to expand...
Click to collapse
Did you try updating the drivers through windows update or something?
The windows auto-update sucks,can't install the drivers oe update them, just says ''you already have the best drivers''...
Maybe the SD Card is unable to mount as you say, if so, can i use a different card or no solution?
Hello there , i was on my way to install a new rom , after i reboot into cwm 5.0.2.8 from my mistake into advanced category i formated "boot" so phone boot into blue screen and pink only , after some search i did , i format sd card and put dload , at first try i put B528 and then B526 and connect my phone with usb without battery , phone in both situations enter in update state > install > reboot and then it stuck loading on huawei logo for some secs and then it auto reboot . Is there any way to fix it or my phone is dead .I need answer from experienced users as i install roms for this phone about 2 years but i miss look while formating and did wrong . Thank you for your time
SOLVED :
For those who have such problems i just did following steps , i formatted sd card and put "dload" from B518(Overseas Normal)(Gingerbread)
because it has unlocked bootloader , after that connect to pc without battery and let it update or if update doesnt start press power + (volum up-down) when update finish , remove usb , remove "dload" from sdcard and then enter in pink screen (power + volum up-down) , connect to pc, it will mount cust_backup , replace recovery with any of the CWM ( i used 5.0.2.8) , reconnect phone to pc and enter recovery (power + volum up) from there u can do everything (install original partition , rom etc...) Note:Battery must be out
I think this way can solve every situation cheers !!
Do you have a repartition data?
Yes
I solved it http://forum.xda-developers.com/showpost.php?p=47255870&postcount=41 And then install B526 or B528.
scux said:
I solved it http://forum.xda-developers.com/showpost.php?p=47255870&postcount=41 And then install B526 or B528.
Click to expand...
Click to collapse
Yeah i just did a similar way but without going to froyo anyway thanks..
Hello...i think that im in troubles here...
I install the Meticulus TWRP version on my P9 Lite...later i flash the last update.zip with he...
The process end with an error...and the phone reboot by himself from the recovery.
Starts the updating,finish the process and the phone boot...in the lockscreen says"enter the PIN code for security..."but the numbers of the lockscreen to write de PIN is missing...
And when i connect the phone to pc,(to put MM update.zip on he)doesn't show me the diferents data partitions (internal memory,sd card)...only says"generic a15"
What can i do? if there is something that can i do...
(sorry my bad english,i'm from Uruguay)
I Extract the sdcard...
I Put it into another phone...in the sd card...create a folder and call it"dload"...in that folder i put the UPPDATE.app file from the last Marshmallow update.
i Extract the sd card from that another phone and put it into the P9 Lite. I Shutdown the phone...and then press volume +,volume - and power at the same time till start. And now Doesnt pass the huawei logo.
to solve the bootloop after downgrading from N beta to M (b151), I had to
1- Shutdown my phone
2- Plug to my computer.
3- Press Volume down + PWR
4- Once in fastboot/rescue mode, open cmd window on my PC and type:
fastboot oem unlock (unlock code) .
5- Follow unlock procedure instructions and then the phone does a factory reset.
6- The phone reboots and it's done
Hey their. So i jsut bought a one plus 6t and started playing around iwth it. I tried to get twrp and i got it but when i rebooted to os i had no wifi. So i download magisk zip and flashed it. After this i got stuck in bootloop and so i wne to twrp and wiped everything except system. Then i rebooted and got this message Qualcomm CrashDump Mode Attempted to kill init! exit code=0x0000000b do_exit. Then i freaked out and accidently wipes system too. Now i think i have a complete brick as adb still works but i cant transfer any file from pc to phone because theirs no system. Please help!!!
Never wipe system and vendor on A/B devices, literally, never.
Boot twrp and flash OOS or use msmdownloadtool.
What do you mean flash OOS. Like flash a fastboot file? And what version of msmdownloadtool should I get as their is no system. Should I get 10 cause that was my last system or it doesn't matter.
Update. I left twrp after flashing a stock image and now adb doesn't recognize my phone. When booting into recovery I go into the one plus recovery. Now I'm really screwed.
Okay now im really screwed. Whenever I boot with power up or power down I get sent to the bootlaoder page that says fastboot mode products name. I cant leave this page however. On the options above the information I click reboot recovery I get sent back to this page.
UPDATE. My phone is a literal brick now. It won't even turn on. I tried to force reboot it before and after it powered off it wont turn on. Its fully charged and when connecting to charger of holding buttons nothing happens. I have no warranty so Im hoping that someone can help me.
The "bootloader page" is fastboot and that's normal because there's no system to boot, you wiped that partition... and ADB only recognizes the phone when the boot process ends and ADB is enabled in the phone.
If you press vol up + down when you connect the usb cable the phone boots in EDL (Emergency Download Mode) mode, long press power + vol up to leave that state.
Now, download msmdownloadtool from here, extract the file, power off you phone, conect the usb cable to your pc, press vol up + down and connect the usb cable to the phone, open msmdownloadtool and flash the OS.
Edit: Read this thread for more detailed instructions.
What do you mean by flash the OS. The OS in the system or do I have to download one?
whenever I plug in my device it vibrates and then goes into the fastboot page. Also adb can detect it if I type in fastboot devices.
So i go the device to work and MsM worked until 4 seconds and then It said param preload for status of connection and status of last communication says device not match image
Try with the fastboot ROM.
When i downloaded another version of MsM it did not say no image match instead it stays at 4sec and says recording download time
Can you give me instructions on how to use the fastboot room? Like after i download it what should i do with it?
Download the rom, unpack it, boot your phone in fastboot (Power + vol up + vol down), connect the phone to your pc and execute the "flash-all.bat" file, and just wait.
um what is flash-all... How does it work what am i supposed to do.
what does unpack it mean?
Hey their im going to assume you meant to unzip the file and then open the file called falsh-all.bash. In that case when i do that i get this message "error: failed to load 'images.zip': No such file or directory
Press any key to exit..." In a CMD window