Database Users

voice dial

Hi to all just like to ask how do i make voice dial calls when the xda executive flip cover is closed i tried andd it did not work

you need to have at least one entry in Voice speed dial, and should not have the buttons locked. (which is a bit dangerous since there are a lt of buttons to be pressed inadvertedly..)
Alternatively, use the BT headset call/end button to launch the voice speed dial. Obviously BT needs to be on (blue LED flashing)

Hi lutz
I thought the same but even with the buttons not locked it doesn't work on mine. Still keep having to open the lid an inch or so :x
Can anyone confirm if it should definately work with the buttons enabled (start, settings, buttons, lock, do not lock buttons)

Voice dial over BT does not work correctly ! Plz Help

After upgrade to iMate 1.30.76 WWE everything is going fine but i have a strange glitch -
When device is OFF and i push the button on my BT headset it turns on the sound transmission (i can hear the very low noise) but the Voice dialer does not start. Device switches on and shows the LOCK screen.
When device is ON and UNLOCKED - everything works fine - pushing the button on BT headset starts the Voice dialer.
BTW: - i have a 0-minute device lock settings - so - when i push the power button it immediately switches off and locks.
Can anybody help with this ?

Disable "POWER OFF AFTER..." on batery power ... in settings. do not press Power before You close PDA, Device will power off automatically. Disable auto lock... and Your UNIVERSAL should work fine. It helped me

Anyone else having trouble with Mortsaver?

Hi again, I've just installed mortSaver primarily for turning off the screen but keeping my lecture video audio still running in the background. I've used this excellent application on all my other phones no problem. However on my M700 the buttons dont seem to work ie.Deactivation using assigned button (button 1) + button 2 absolutely does not work. Even using only button 1 for activation AND deactivation doesnt work (deactivation part). Have to get out of it by the escape sequence (2 presses of the power button within 10secs). However this ends up soft-resetting the unit (proper power off).
Any ideas on what to do or alternative applications to deactivate the screen but keep the video running in the background please?

dabs1 said:
Hi again, I've just installed mortSaver primarily for turning off the screen but keeping my lecture video audio still running in the background. I've used this excellent application on all my other phones no problem. However on my M700 the buttons dont seem to work ie.Deactivation using assigned button (button 1) + button 2 absolutely does not work. Even using only button 1 for activation AND deactivation doesnt work (deactivation part). Have to get out of it by the escape sequence (2 presses of the power button within 10secs). However this ends up soft-resetting the unit (proper power off).
Any ideas on what to do or alternative applications to deactivate the screen but keep the video running in the background please?
Click to expand...
Click to collapse
I used MortSaver on my Jam, which was running WM2003. When I upgraded to a Jamin, I couldn't get it to work anymore. I haven't even tried it with my Trinity because I just assumed that Mortsaver doesn't work properly in WM5. I think it is quite an old version.

Hello,
Mortsaver works fine on my Dopod D810.
Here is a list of my options:
Deactivation:
Screen off timeout: 10
Power off timeout: 10
1st Button: Button 1
2nd Button: None
Show countdown after call: ticked
Other application buttons: unticked
Power
Turn off device: both unticked
This works fine when i'm using mortplayer in the background to listen to music (to unlock press power then voice command button). If this fails you might want to try downloading the latest version from the authors website.

Wake up on screen touch

I've searched and can't find a setting so it comes on when I touch the screen. I have limited mobility in my hand so that would make a big difference for me.
THANKS!

I use a software called Cyberion Voice commander ( this may work as well with Microsoft Voice command as well ) and when i press the button on my bluetooth headset it would wake up the screen and then askk for me to submit a command. hope this tid bit helps as currently there is no touch screen to wake up. you either need software that runs in the background to wake it up via bluetooth etc, or you need to press the power button on the side. this is probably due to the way this phone works as well does many windows mobile's and if you could wake it up with the touch screen it could accidently get turned on just being in a pocket , or handbag etc.etc.

Google assistant, lock screen and light automation

Hello,
I have a question regarding Google Assistant light automation. I recently purchased a Philips hue system and its working pretty well. Yesterday, I set up Google Assistant to voice control the lighting at home. Some months ago, I received the Android 10 update for the Note 9 and according to the Internet, since that update, Google Assistant asks to unlock the phone in order to perform the turn on/off functions for the bulbs. Now, I found out that adding my home to Smart Lock works. But the thing is that as long the phone is locked, I only get one response from the Assistant. When I try to activate it again, it activates, then it listens to what I'm saying and then it shows the three dot icon like its searching but nothing happens. If I turn off the screen with the button and activate the Assistant once again, it again works for the first command. I tried to factory reset the phone but it didnt help.
This is certainly a Smart Lock/Android 10/Google Assistant issue since if I'm not home and the phone is locked, I receive response all the time. Likewise, if I'm home and unlock the phone manually, I get response on every command.
Is this a bug? Do anyone have a similar issue?
Thanks in advance

Yes, it is a bug, but not necessarily because of the home automation although I first noticed it when it didn't respond to home automation commands or routines.
i recently purchased quite a few automated lights and switches.
ok google
turn on bedroom
what time is it
tell me a joke
all have the grayed out mic and grayed out dots you refer to.
WHEN the phone is unlocked and home.
It is only noticeable for me when the phone is unlocked but home. I have set the GPS and WIFI to keep the phone unlocked at home, so it theoretically should work since it recognizes my wifi network and gps. but it refuses to respond with a "ok google" when speaking about turning something on and off command.
unlock the phone manually and it works.
I haven't been out much...