Factory Binary - Successful downgrade from MM to LP - Verizon Galaxy Note 4 General

I stumbled across this file on the net and thought I would give it a spin.
I was on Firmware N910VVRU2CPF3 dated June 2016
I flashed the "Combination file" using Odin 3.10.7
COMBINATION_VZW_FA44_N910VVRU2APB1_VZW2APB1_2932719_REV00_user_mid_noship_MULTI_CERT.tar.md5
I then flashed N910VVRU2BPA1 firmware from here
It worked and now I am on 5.1.1
I wanted to go lower but, because of the Binary being fused at 2, I was unable.
Perhaps someone can find a way to get back to 4.4.4 with this so we can root with CF Auto Root.
For those that might be confused on how to use this..
1. Place your phone in Download mode
2. Open Odin on your PC, select the AP button, and then select the combination file that you just downloaded..
3. After install the phone will reboot and it will be in a Factory repair or test mode.. feel free to tinker and explore.
4. Power off your phone and go back to download mode.
5. Go back into Odin and flash your desired firmware which would be 5.1.1 and above.

captaingowa said:
I stumbled across this file on the net and thought I would give it a spin.
I was on Firmware N910VVRU2CPF3 dated June 2016
I flashed the "Combination file" using Odin 3.10.7
COMBINATION_VZW_FA44_N910VVRU2APB1_VZW2APB1_2932719_REV00_user_mid_noship_MULTI_CERT.tar.md5
I then flashed N910VVRU2BPA1 firmware from here
It worked and now I am on 5.1.1
I wanted to go lower but, because of the Binary being fused at 2, I was unable.
Perhaps someone can find a way to get back to 4.4.4 with this so we can root with CF Auto Root.
For those that might be confused on how to use this..
1. Place your phone in Download mode
2. Open Odin on your PC, select the AP button, and then select the combination file that you just downloaded..
3. After install the phone will reboot and it will be in a Factory repair or test mode.. feel free to tinker and explore.
4. Power off your phone and go back to download mode.
5. Go back into Odin and flash your desired firmware which would be 5.1.1 and above.
Click to expand...
Click to collapse
I'm pretty sure you can just use the BPA1 firmware to downgrade without flashing the "Combination file".

weard1212 said:
I'm pretty sure you can just use the BPA1 firmware to downgrade without flashing the "Combination file".
Click to expand...
Click to collapse
Perhaps ?
I have seen several warnings not to take any updates past a certain date on Android 6.0.1, otherwise you cannot go back, as the newer firmware prevents any downgrading in lieu of "security patch".
The Combination file enables you to install any firmware or newer than its specific binary.
In running this you will notice a bare bones KitKat 4.4.4 AOSP UI.
The Binary is fused for loading only firmware that includes KNOX, as it was first introduced as of 5.1.1 for the SM-N910V
Which is my belief why it is such a secret to go back.

captaingowa said:
Perhaps ?
I have seen several warnings not to take any updates past a certain date on Android 6.0.1, otherwise you cannot go back, as the newer firmware prevents any downgrading in lieu of "security patch".
The Combination file enables you to install any firmware or newer than its specific binary.
In running this you will notice a bare bones KitKat 4.4.4 AOSP UI.
The Binary is fused for loading only firmware that includes KNOX, as it was first introduced as of 5.1.1 for the SM-N910V
Which is my belief why it is such a secret to go back.
Click to expand...
Click to collapse
unnecessary ! you can flash back to lollipop(5.1.1 bpa1) with Odin without the need of this binary and Knox hit the scene on jellybean final bud (4.3)

@mojoswagger1980
Please show me 4.3 firmware for the SM-N910V
The Verizon Note 4 Jumped from 4.4.4 to 5.0.1 then to 5.1.1
Per Samsung the update from 5.0.1 to 5.1.1 installed Knox on the SM-N910V.
This Binary is very useful ..
But glad to know you don't like that I posted it.

Lol the sm 900v (note3) premiered on 4.3 essentially the same phone seriously. For the record you said Knox kept us from downgrading as of lolipop I then corrected that statement with mine . device model firmware doesn't apply given that Knox was universaly added to all android devices at that time

I downgraded successfully using BPA1 from the newest firmware just this last week. No issues or conflicts and rerooted/bootloader unlocked...easypeasy

please elaborate
Oh_wow said:
I downgraded successfully using BPA1 from the newest firmware just this last week. No issues or conflicts and rerooted/bootloader unlocked...easypeasy
Click to expand...
Click to collapse
can you list details of how you did this and what version you were on before downgrade, thanx

i have followed the instructions but it keeps failing. any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

drsuse said:
i have followed the instructions but it keeps failing. any ideas?
Click to expand...
Click to collapse
Check to make sure you are not using a USB3 port. I always have issues with USB3.

Those of you that have downgraded back to 5.1.1. I have a question for you.
While on 6.0.1, did you have problems with your GPS with it losing signal? IF SO, did downgrading back to 5.1.1 solve this problem?
I've been having problems with my GPS for quite awhile now and I can't figure out if the problem is related to 6.0.1, loose screws or oxidation of the contacts inside of my phone.

Know what? I think all my laptop usb are usb3. I'll try my older laptop and let you know

i needed a pit file for the note 4 vzw i added that and erased the partition via odin and now im flashing 5.1.1 no errors this time

Anyone try this with build number: MMB29M.N910VVRS2CQB2 ????

Balian67 said:
Anyone try this with build number: MMB29M.N910VVRS2CQB2 ????
Click to expand...
Click to collapse
I need to know this tooo

thegiant_2 said:
I need to know this tooo
Click to expand...
Click to collapse
I got it to work. Don't go doing anything just yet. I plan to make a new topic about it.

Balian67 said:
I got it to work. Don't go doing anything just yet. I plan to make a new topic about it.
Click to expand...
Click to collapse
So, this method won't work???

thegiant_2 said:
So, this method won't work???
Click to expand...
Click to collapse
yes it worked for the build number I was on. Which is up in my other comment. Be careful, follow the directions closely

JOSHSKORN said:
, did you have problems with your GPS with it losing signal? IF SO, did downgrading back to 5.1.1 solve this problem?
I've been having problems with my GPS for quite awhile now and I can't figure out if the problem is related to 6.0.1, loose screws or oxidation of the contacts inside of my phone.
Click to expand...
Click to collapse
GPS Signal I believe is hardware related and I have that problem as well..
This appears to be the most feasible approach to fixing it and I will be attempting this shortly as it is not the same phone model but possibly the same cause for the issue.
https://forum.xda-developers.com/showthread.php?t=1973727

Trying to downgrade as well and having the same issues.... cannot flash anything without it failing. The only firmware that worked was the combination one and nothing else. Please help! Thanks!

Related

[Q] how to downgrade lollipop to kitkat?

Hi. I have recently updated my note 3 N9005 Lte from Kitkat 4.4.2 to Lollipoo and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?
It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM
gns3555 said:
Hi. I have recently updated my note 3 N9005 Lte from Kitkat 4.4.2 to Lollipoo and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?
Click to expand...
Click to collapse
tell me if you do it without any problem???????
thanks
jemis1983 said:
tell me if you do it without any problem???????
thanks
Click to expand...
Click to collapse
Why don't you do it first and then tell me if it worked for you or not
gns3555 said:
Why don't you do it first and then tell me if it worked for you or not
Click to expand...
Click to collapse
Lol:sly::sly::sly::sly::sly:
jemis1983 said:
tell me if you do it without any problem???????
thanks
Click to expand...
Click to collapse
I am restoring my nandroid backup of 4.4.2 after flashin lollipop for testing, aannnnnndddd its working fine. Using n9005.
You dont try with odin????
dollar7 said:
It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM
Click to expand...
Click to collapse
I wouldn´t risk to do it like this. If you have updated the bootloader, I think you can´t just flash the KK via Odin. If you have updated the bootloader, there is no back to roll back. If not, you have still a chance.
flashing leaked KitKat
hi,
what about to flash the leaked KitKat which contains all the files needed for Odin, including bootloader? What do you think about it guys?
fadhil3536 said:
I am restoring my nandroid backup of 4.4.2 after flashin lollipop for testing, aannnnnndddd its working fine. Using n9005.
Click to expand...
Click to collapse
do upgrade with odine?????
I tried downgrading using the Leaked Polish KitKat to no help.
First tried to downgrade using the original Australian one. It failed by Odin.
Then tried with a .PIT file and the corresponding Germany firmware, didnt work either. Phone wasnt even switching on, gave some error saying firmware update went wrong, connect to Kies... or something similar.
Just to see I reinstalled the Lollipop, It worked just fine.
Then saw about the Polish KitKat leak with all the BL/CSC/AP and all files, downloaded and tried.
For my joy, It installed just fine, but my joy ended when I booted into the OS, it was all buggy, network not working, constant app crashing, camera fail, and made me really scared when It showed that my IMEI number is NULL!! I thought Im so done....
Then tried the German KitKat with the Polish leak's Boot Loader (BL) file, it failed too.
Since I was so worried about the phone getting address-less (No IMEI, no other addresses) I tried reinstalling the Lollipop leak.
It worked again like a charm, and my IMEI n everything else is back.
So looks like Ill have to wait till we get an official Lollipop update, so I can get out of the leak.
jemis1983 said:
do upgrade with odine?????
Click to expand...
Click to collapse
I have rom crash lollipop and want to go to 4.4.2 official.how will do;
antriou26 said:
I have rom crash lollipop and want to go to 4.4.2 official.how will do;
Click to expand...
Click to collapse
download you rofficial firmware from sammobile website flash your file with odin easy!!!!!:good:
jemis1983 said:
download you rofficial firmware from sammobile website flash your file with odin easy!!!!!:good:
Click to expand...
Click to collapse
And this works? I have my doubt though... but please provide proof i want to downgrade too unsupported YET
Thanks
Silassentinel said:
And this works? I have my doubt though... but please provide proof i want to downgrade too unsupported YET
Thanks
Click to expand...
Click to collapse
Yes for me everything is going well!!!!
What version of Odin do you use? Thanks
hi
Dear how to check if the bootloader is updated or not?
motorkar1234 said:
I wouldn´t risk to do it like this. If you have updated the bootloader, I think you can´t just flash the KK via Odin. If you have updated the bootloader, there is no back to roll back. If not, you have still a chance.
Click to expand...
Click to collapse
---------- Post added at 07:01 AM ---------- Previous post was at 06:43 AM ----------
dear from where i can get tje KK file??
dollar7 said:
It's pretty simple.
1. Do the factory reset
2.Install KK via odin
3. Enjoy your KK
It worked for me on GNG1 ROM
Click to expand...
Click to collapse
Downgrade to JELLY BEAN
gns3555 said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi. I have recently updated my Note 3 N9005 Lte from Kitkat 4.4.2 to Lollipop and also updated the BL,CSC,CP AND PIT File. Now is it possible to downgrade it back to Kitkat firmware? N9005XX...B7 BTU version ?
Click to expand...
Click to collapse
Downgrade to Jelly Bean Instead!
KitKat is bogus‼
Really, downgrading to JB is worthed it!
http://forum.xda-developers.com/showpost.php?p=56548111&postcount=8&styleid=18
I'm sorry, I don't know how to check whether the bootloader is updated.
Btw, Stallione, when the IMEI is gone, you can restore it from EFS backup
jemis1983 said:
Yes for me everything is going well!!!!
Click to expand...
Click to collapse
Nice, how did you do this? It keeps failing for me...

No WiFi or Mobile Data After Unroot

I recently decided to unroot my Galaxy S4 SGH-I337 from AT&T using the methods and the downloads from this website here: http://www.androidrootz.com/2014/03/...xy-s4-sgh.html
Now, when I turn my phone on, neither my WiFi or my mobile data will work, and if I try to turn my WiFi on, I get a popup from Security Information that says "This device has detected an application attempting to perform actions that are not permitted. These actions have been blocked.
I've tried pulling out the battery, I've tried turning WiFi power save off from the dialer menu, but neither one has worked. Not to mention my device is so old now it's probably out of warranty. I'm not really sure what to do from here.
JesseAdkins91 said:
I recently decided to unroot my Galaxy S4 SGH-I337 from AT&T using the methods and the downloads from this website here: http://www.androidrootz.com/2014/03/...xy-s4-sgh.html
Now, when I turn my phone on, neither my WiFi or my mobile data will work, and if I try to turn my WiFi on, I get a popup from Security Information that says "This device has detected an application attempting to perform actions that are not permitted. These actions have been blocked.
I've tried pulling out the battery, I've tried turning WiFi power save off from the dialer menu, but neither one has worked. Not to mention my device is so old now it's probably out of warranty. I'm not really sure what to do from here.
Click to expand...
Click to collapse
The unroot app probably screwed up your kernel. To unroot your phone you do not need another app. You can do full unroot from the SuperSU setting.
Please tell us your phone android version, Bootloader version, baseband version , etc..
Please backup everything. You might need to flash just a kernel or just a modem or full rom or full firmware.
I'm running 4.3, I believe my bootloader is I337UCUEMK2, the baseband is I337UCUFNB1. Do you need to know the kernel version?
JesseAdkins91 said:
I'm running 4.3, I believe my bootloader is I337UCUEMK2, the baseband is I337UCUFNB1. Do you need to know the kernel version?
Click to expand...
Click to collapse
If I knew the kernel it would help. You have jelly bean bootloader with kitkat modem. It appears that your kernel and modem are not communicating after the unroot.
It could be fixed by flashing the kernel and if it is not work or it would give you the softbrick, you might need to flash the whole firmware.
There is MK2 firmware on this forum. However, yesterday I was helping someone who has the same problem as you do and the MK2 firmware did not work. He had finally to flash the NB1 firmware to work again.
You can read our conversation here.
Use the reply button so that I knew you reply my posting.
sway8966 said:
If I knew the kernel it would help. You have jelly bean bootloader with kitkat modem. It appears that your kernel and modem are not communicating after the unroot.
It could be fixed by flashing the kernel and if it is not work or it would give you the softbrick, you might need to flash the whole firmware.
There is MK2 firmware on this forum. However, yesterday I was helping someone who has the same problem as you do and the MK2 firmware did not work. He had finally to flash the NB1 firmware to work again.
You can read our conversation here.
Use the reply button so that I knew you reply my posting.
Click to expand...
Click to collapse
My kernel is 3.4.0-1921628
[email protected] #1
I'll check out the links and see if they help.
sway8966 said:
If I knew the kernel it would help. You have jelly bean bootloader with kitkat modem. It appears that your kernel and modem are not communicating after the unroot.
It could be fixed by flashing the kernel and if it is not work or it would give you the softbrick, you might need to flash the whole firmware.
There is MK2 firmware on this forum. However, yesterday I was helping someone who has the same problem as you do and the MK2 firmware did not work. He had finally to flash the NB1 firmware to work again.
You can read our conversation here.
Use the reply button so that I knew you reply my posting.
Click to expand...
Click to collapse
So I need to download one of these and flash it using ODIN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JesseAdkins91 said:
So I need to download one of these and flash it using ODIN?
View attachment 3852438
Click to expand...
Click to collapse
So I tried flashing the firmware with ODIN, but this is what happened.
JesseAdkins91 said:
So I tried flashing the firmware with ODIN, but this is what happened.
View attachment 3852461
Click to expand...
Click to collapse
That is exactly what happened to the another person that I mentioned in my previous post. If you go read that thread you will see it.
You and him has the almost the same problem and I think you will need the same solution.
I could copy and paste what I said from that thread. But please go and read that thread and follow the instructions that I posted there.
If that is not solved your problem we will think of another route.
sway8966 said:
That is exactly what happened to the another person that I mentioned in my previous post. If you go read that thread you will see it.
You and him has the almost the same problem and I think you will need the same solution.
I could copy and paste what I said from that thread. But please go and read that thread and follow the instructions that I posted there.
If that is not solved your problem we will think of another route.
Click to expand...
Click to collapse
Thank you very much. My phone is working again.

Can someone send me in the right direction - G930V --> G930U?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried multiple zips to try to get the U software on my phone but always ends up not booting. It will show galaxy S7 and then boot straight back into recovery.
Can someone please provide a link to the exact download files I need. Sorry to start a thread over this. I'm just having a hard time finding the correct files. Thanks in advanced.
Anyone?
It should be as (simple) as..
Rooting your phone -> https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 (this won't trip KNOX)
Downloading the proper firmware from SamMobile -> https://www.sammobile.com/firmwares/database/SM-G930U/
Flash the firmware via odin (you can use the same method found here: https://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065)
Profit
I just did this recently to switch from SM-G930R4 to SM-G930V
Note, you will lose all data on the phone if you try this.
James.Markham0757 said:
I have tried multiple zips to try to get the U software on my phone but always ends up not booting. It will show galaxy S7 and then boot straight back into recovery.
Can someone please provide a link to the exact download files I need. Sorry to start a thread over this. I'm just having a hard time finding the correct files. Thanks in advanced.
Click to expand...
Click to collapse
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
nrage23 said:
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
Click to expand...
Click to collapse
Thanks. I actually already got this done. The problem is I was using the CSC HOME file instead of the Other one. Thank for the reply tho! Maybe it will help someone else!
Just curious what the benefits of converting your Verizon phone to the U version is?
scadilla said:
Just curious what the benefits of converting your Verizon phone to the U version is?
Click to expand...
Click to collapse
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
JediDru said:
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
Click to expand...
Click to collapse
Is the bootloader unlocked? Is there any down side? LTE performance etc? Can this still be done if I loaded the Nougat beta on my G930V? Thanks in advance.
nrage23 said:
Go to Updato.com and get the newest SM-930U firmware from January and flash via Odin. The 930U firmware you flash must have a bootloader the as or newer than your current firmware or it will not boot. You do not have to root to update via Odin.
Click to expand...
Click to collapse
JediDru said:
Less boat , no Verizon boot animation, and my favorite the spam dialer Verizon thought was a good idea to remove. I like to think of the U as pure Samsung vs the Verizon gimped software.
Click to expand...
Click to collapse
Also it unlocks the LTE bands Verizon has Disabled. And Disables the Hotspot Lock.
Yes jedi the built in Caller ID is deffinitly cool.
scadilla said:
Is the bootloader unlocked? Is there any down side? LTE performance etc? Can this still be done if I loaded the Nougat beta on my G930V? Thanks in advance.
Click to expand...
Click to collapse
Bootloader is locked because it is a snapdragon variant. Only downside is can think is you would have to pay your bill in store or on a PC. Lte seems the same. Yes if nougat is on. You just load up the most recent U firmware and flash over nougat in odin.
Binary Assault said:
It should be as (simple) as..
Rooting your phone -> https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 (this won't trip KNOX)
Downloading the proper firmware from SamMobile -> https://www.sammobile.com/firmwares/database/SM-G930U/
Flash the firmware via odin (you can use the same method found here: https://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065)
Profit
I just did this recently to switch from SM-G930R4 to SM-G930V
Note, you will lose all data on the phone if you try this.
Click to expand...
Click to collapse
it shoudl be simple...but it failed for me in one of my two phones. now it keeps going to recovery (downloading the original firmware to reflash it). the one that worked was a SMG930VZDA (made in vietnam) while the one that didn't is a SMG930VZKA (made in korea). I hadn't updated either one from the original firmware, but not sure what firmware they came with....
so if it works, it's great, but if it fails...
I used the instructions and file in
https://forum.xda-developers.com/verizon-galaxy-s7/help/help-to-flash-930u-930v-t3432668
---------- Post added at 01:19 PM ---------- Previous post was at 12:46 PM ----------
scadilla said:
Just curious what the benefits of converting your Verizon phone to the U version is?
Click to expand...
Click to collapse
lets you use in tmobile wih wifi calling, volte, etc. it's very useful
JediDru said:
Bootloader is locked because it is a snapdragon variant. Only downside is can think is you would have to pay your bill in store or on a PC. Lte seems the same. Yes if nougat is on. You just load up the most recent U firmware and flash over nougat in odin.
Click to expand...
Click to collapse
You can still use the My Verizon app to pay, if you want to. You do lose Verizon's native VVM app, but there are workarounds to use Voice or another third-party VVM app (I personally use YouMail).
raduque said:
You can still use the My Verizon app to pay, if you want to. You do lose Verizon's native VVM app, but there are workarounds to use Voice or another third-party VVM app (I personally use YouMail).
Click to expand...
Click to collapse
Hey your right! One less hassle.
Hi everyone,
I recently purchased a new g930r4 (US Cellular) because my last samsung got stolen. Anyway, the first time I turned on the phone, I started having multiple issues (kept rebooting, unable to recognize headset, kept freezing). Then I decided to change it to the g930U firmware and I noticed a HUGE difference. I totally recommend this to anybody that has same problems I mentioned. Thanks to all the information from this post, I was able to successfully flash the firmware. Thank you all for the support! I hope this helps someone out there whos still got some doubts.
Hello, I have the SM-G930V Snapdragon variant in the US and I would really like to root it to get a custom ROM. If you wouldn't mind, I'd appreciate a reply (if you have one) to this thread I made on the topic: https://forum.xda-developers.com/verizon-galaxy-s7/help/questions-bootloader-rooting-custom-t3721109

ODIN fails on flashing Stockrom onto S7 Edge

I want to downgrade my S7 Edge to a lower Android Security Patch, so i downloaded, the Android 8.0.0 Version from the 30. May 2018. Currently my device runs on Android 8..0.0 with Security Patch 1 Jan. 2019
Im Using Odin3 v3.13.1, but each time I am trying to flash my device, it shows me "Fail" or doesnt even start.
I have tried using BL, AP, CP and CSC:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then i left BL out:
Then i tried only AP:
The ending always put out: Complee (Write) operation failed.
I dont know what i can do. I followed every instruction i could find. My device is not rooted, and i dont want it to be rooted.
scharro said:
I want to downgrade my S7 Edge to a lower Android Security Patch, so i downloaded, the Android 8.0.0 Version from the 30. May 2018. Currently my device runs on Android 8..0.0 with Security Patch 1 Jan. 2019
Im Using Odin3 v3.13.1, but each time I am trying to flash my device, it shows me "Fail" or doesnt even start.
I have tried using BL, AP, CP and CSC:
Then i left BL out:
Then i tried only AP:
The ending always put out: Complee (Write) operation failed.
I dont know what i can do. I followed every instruction i could find. My device is not rooted, and i dont want it to be rooted.
Click to expand...
Click to collapse
Most probably the reason for that is you can't downgrade, it seems your bootloader is newest and can't be downgraded back . This is most obvious thing
Scorpionea said:
Most probably the reason for that is you can't downgrade, it seems your bootloader is newest and can't be downgraded back . This is most obvious thing
Click to expand...
Click to collapse
According to this Guide on this Forum "[Guide] How to downgrade from Android Oreo 8.0 to 7.0 (Non-rooted)" it shall work. I followed every step. Even if i try to flash the device, without making the mark at BL, it doesnt work. I always get fail, or i get stuck on Setup Connection.
scharro said:
According to this Guide on this Forum "[Guide] How to downgrade from Android Oreo 8.0 to 7.0 (Non-rooted)" it shall work. I followed every step. Even if i try to flash the device, without making the mark at BL, it doesnt work. I always get fail, or i get stuck on Setup Connection.
Click to expand...
Click to collapse
If you read that thread and last few post it's been said guide for that isn't working anymore
Scorpionea said:
If you read that thread and last few post it's been said guide for that isn't working anymore
Click to expand...
Click to collapse
Yeah, i now noticed, that my Device is telling me its Bootloader is 3 and the Binary is 2. What can I do know? Can i never flash an older ROM?
scharro said:
Yeah, i now noticed, that my Device is telling me its Bootloader is 3 and the Binary is 2. What can I do know? Can i never flash an older ROM?
Click to expand...
Click to collapse
You could flash older rom like nougat only if install TWRP aka rooting your phone and installing custom rom , officially u can't go back anymore .
Scorpionea said:
You could flash older rom like nougat only if install TWRP aka rooting your phone and installing custom rom , officially u can't go back anymore .
Click to expand...
Click to collapse
So I root, flash custom rom, and then flash an older stockrom on? Will that be fine with the bootloader?
Where can i seek for help ?
scharro said:
So I root, flash custom rom, and then flash an older stockrom on? Will that be fine with the bootloader?
Where can i seek for help ?
Click to expand...
Click to collapse
Hm I don't know if u can downgrade your bootloader with TWRP ,it could be possible but can't tell for sure.
What I meant is you can use nougat only as custom rom.
Scorpionea said:
Hm I don't know if u can downgrade your bootloader with TWRP ,it could be possible but can't tell for sure.
What I meant is you can use nougat only as custom rom.
Click to expand...
Click to collapse
Hm only using a custom rom wouldnt be thing i need, because then i have to root my device and many apps dont work with root mode on :/ thats why i am looking for an older stockrom
scharro said:
Hm only using a custom rom wouldnt be thing i need, because then i have to root my device and many apps dont work with root mode on :/ thats why i am looking for an older stockrom
Click to expand...
Click to collapse
Actually many apps are working just fine , thanks to magisk it can hide your root so u can use banking app,Pokemon go and many other as you have magisk .
As u seen it u can't go back via official way. Stay on latest stock without root ,no other way I'm afraid
Good luck

Galaxy S8 Fails to Flash Firmware In Odin 3.13

I'm trying to downgrade the software in the S8 to android 7 so that I can root it (root methods that I tried for android 9 haven't worked) and when in Odin, the original software fails to flash, I've tried a couple different AP files for my model and they all fail. Any suggestions?
Any help is appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JesseJames1836 said:
I'm trying to downgrade the software in the S8 to android 7 so that I can root it (root methods that I tried for android 9 haven't worked) and when in Odin, the original software fails to flash, I've tried a couple different AP files for my model and they all fail. Any suggestions?
Any help is appreciated.
Click to expand...
Click to collapse
It fails because you cannot downgrade bootloader, hence the Odin fail at boot.img. you must flash the current or newer BL unfortunately. Have you tried to flash twrp + magisk for root?
callumbr1 said:
It fails because you cannot downgrade bootloader, hence the Odin fail at boot.img. you must flash the current or newer BL unfortunately. Have you tried to flash twrp + magisk for root?
Click to expand...
Click to collapse
I have and it also fails.
Bump
Same problem here!
What is your S8 model?
S8 plus, actually today i toom the courage to nand erase it, everything went pretty but nothing changes. I thought I'll brick it.
---------- Post added at 09:46 PM ---------- Previous post was at 09:41 PM ----------
callumbr1 said:
It fails because you cannot downgrade bootloader, hence the Odin fail at boot.img. you must flash the current or newer BL unfortunately. Have you tried to flash twrp + magisk for root?
Click to expand...
Click to collapse
About that, my s8+ keeps booting, I been trying to install TWRP but odin fails with sha256 error. Try again with the patched version, no sha error this time, but fails at recovery.img. Soo no twrp, any idea how to get rid of the fail?
iamchukwudi said:
What is your S8 model?
Click to expand...
Click to collapse
My model is SM-G950W.
Man, just today got s8+ (sm-g955u) totally working! Check this link!
forum.xda-developers.com/galaxy-s8/development/root-t4060701
puxo said:
Man, just today got s8+ (sm-g955u) totally working! Check this link!
forum.xda-developers.com/galaxy-s8/development/root-t4060701
Click to expand...
Click to collapse
The effort put forth by Extreme Syndicate is great except some of the disclaimers aren't promising.
This method will work if you are on Android 9 Pie but will put you on Android 7 nougat. There is no root for Android 9 Pie
You will not be able to use normal magisk
You will not be able to flash custom rom like Lineage or any other AOSP roms
You cannot flash custom boot images or recovery images such as TWRP
The whole reason to root, in my case - any way, is to put a custom recovery on such as TWRP and then flash a custom ROM to get rid of the **** Samsung provides.
In my case, I just downgrade to 7 nougat rom, then couldn't do much, so I got to think. I just wanted to revived this sucker!
Plug it back to odin and reinstall the lastest firmware from sammobile.
I'm not an expert on any of this, but like a said just bringing back this sucker, im in peace.
I can't stand Samsung's software so I'm "glad" in the sense that I bought the phone for experimenting and not to use on a daily basis because if I had to use One UI daily I'd descend into madness over how much I can't stand it.
Having said that, attempting to root it, put a custom recovery and rom on it are very frustrating tasks when Samsung's Knox and other code gets in the way to the point of everything in Odin failing.
"Food for thought" - How can your device be "your" device when it clearly and evidently locks you out of doing whatever you want on it?
I'm not sure if there is a community for anti-bloatware but if there is I'm just as much a part of it as I am with right to repair.
Hi
I have a s8 sn-g50f on pie.
I want downgrade to stock rom 8.0
I try with latest odin 3.141 but is fail after 1 sec.
Wich excat fw i must dowload?
Reason for down is my mcdonalds app tell me that phone is rooted.But my phone not rooted,i was flashed with latest pie from sammobile.
???
On Samsung devices you can't downgrade firmware versions.
Ok.how i can remove root?i flashed clean stock fw but still is rooted.
Please help.i flashed a new stock rom,phone is stil rooted..google pay says thats phone rooted and more apps such as mcdonalds..what i must to do?

Categories

Resources