Ok so after trying a couple of roms that would not work at all, my phone will not boot at all. it just goes to recovery. i have my easyrecowvery stock boot im and stock recovery img. is there anyway to unbrick my phone?
chronichemp said:
Ok so after trying a couple of roms that would not work at all, my phone will not boot at all. it just goes to recovery. i have my easyrecowvery stock boot im and stock recovery img. is there anyway to unbrick my phone?
Click to expand...
Click to collapse
If they flashed successfully, you only need to turn the phone off completely and then enter into recovery mode manually as in doing the gesture to go into twrp
jinkerz9430 said:
if they flashed successfully, you only need to turn the phone off completely and then enter into recovery mode manually as in doing the gesture to go into twrp
Click to expand...
Click to collapse
thank you so much fixedd it
Related
Hey guys, I flashed a p802 ROM on my p800(att) and I'm stuck on fastboot. I removed and reflashed recovery. Nothing happened. I can't return it to stock cause the model its showing in download mode is p802. Is there anything I could do?
When i turn it on its stuck at fastboot mode started - udc start. I can connect it my computer and recognize it.
soosoolhastam said:
Hey guys, I flashed a p802 ROM on my p800(att) and I'm stuck on fastboot. I removed and reflashed recovery. Nothing happened. I can't return it to stock cause the model its showing in download mode is p802. Is there anything I could do?
When i turn it on its stuck at fastboot mode started - udc start. I can connect it my computer and recognize it.
Click to expand...
Click to collapse
did you use fastboot flash recovery recovery.img ?
after that you were not able to get into recovery?
Was the 802 ROM a modified stock ROM?
If it was a stock modified ROM then find an original AT&T boot.img, you can download any ATT ROM and extract the boot.img. From there get back into fastboot and flash boot.img
fastboot flash boot boot.img
once you have boot.img flashed you should be able to boot into Android. Do not go into recovery and wipe or format anything.
AndroidUser00110001 said:
did you use fastboot flash recovery recovery.img ?
after that you were not able to get into recovery?
Was the 802 ROM a modified stock ROM?
If it was a stock modified ROM then find an original AT&T boot.img, you can download any ATT ROM and extract the boot.img. From there get back into fastboot and flash boot.img
fastboot flash boot boot.img
once you have boot.img flashed you should be able to boot into Android. Do not go into recovery and wipe or format anything.
Click to expand...
Click to collapse
It was a paranoid android rom. I did what you told me. Now i don't see fastboot anymore. My phone goes constantly restarts itself. I put it into download mode to flash stock through lg glash tool but it still fails. It saying wrong model.
soosoolhastam said:
It was a paranoid android rom. I did what you told me. Now i don't see fastboot anymore. My phone goes constantly restarts itself. I put it into download mode to flash stock through lg glash tool but it still fails. It saying wrong model.
Click to expand...
Click to collapse
Can you get into recovery? Which recovery you have? If you can get into recovery, then flash the PA ROM again so you can get into fastboot, download CM for the 800, extract the boot.img from CM and flash that boot.img
turn the device on holding the power down key and power button, as soon as the bootscreen comes up...release the buttons and re press them immdeatley.
this should put you on the recovery screen, hopefully from there you can restore your phone.
cheers.
spadeace9 said:
turn the device on holding the power down key and power button, as soon as the bootscreen comes up...release the buttons and re press them immdeatley.
this should put you on the recovery screen, hopefully from there you can restore your phone.
cheers.
Click to expand...
Click to collapse
Thanks guys, I'll try it as soon as I get home
I flashed the cm boot image. It rebooted back to fastboot. I can get into recovery. But how can i get another rom on the phone. Mount doesn't work. It can't find drivers.
Ive installed the lg drivers
soosoolhastam said:
I flashed the cm boot image. It rebooted back to fastboot. I can get into recovery. But how can i get another rom on the phone. Mount doesn't work. It can't find drivers.
Ive installed the lg drivers
Click to expand...
Click to collapse
from fastboot flash clockwork recovery if you are not using it and then see if you can mount USB storage. Not sure if it is in twrp or not. Did you use the CM boot.img from the D800 CM 10.2? It should have boot. Did you wipe system?
A friend just gave me a G2 because he had some issues. I want to flash stock rom again but I can't enter into download mode. I hold volume up while plugging in the phone to pc and it just boots normally. I tried to flash custom recovery. I flashed CWM via Rom manager, TWRP via flashify but it's not working. When I boot into recovery it's just the stock recovery, no TWRP no CWM. Any ideas? Am I missing something? Do I need to unlock bootloader? I searched for how to unlock bootloader but I can't find anything. (I managed to root the phone)
ilooze said:
A friend just gave me a G2 because he had some issues. I want to flash stock rom again but I can't enter into download mode. I hold volume up while plugging in the phone to pc and it just boots normally. I tried to flash custom recovery. I flashed CWM via Rom manager, TWRP via flashify but it's not working. When I boot into recovery it's just the stock recovery, no TWRP no CWM. Any ideas? Am I missing something? Do I need to unlock bootloader? I searched for how to unlock bootloader but I can't find anything. (I managed to root the phone)
Click to expand...
Click to collapse
just hold the volume up button and then plug the USB,make sure you have installed the drivers!
-iNCEPTiON- said:
just hold the volume up button and then plug the USB,make sure you have installed the drivers!
Click to expand...
Click to collapse
I tried that and It does not work. Drivers are installed too
ilooze said:
I tried that and It does not work. Drivers are installed too
Click to expand...
Click to collapse
Strange.. can you boot to android ? or fastboot?
-iNCEPTiON- said:
Strange.. can you boot to android ? or fastboot?
Click to expand...
Click to collapse
I can boot the rom normally. I don't know how to boot in fastboot mode and the stock recovery is working.
ilooze said:
I can boot the rom normally. I don't know how to boot in fastboot mode and the stock recovery is working.
Click to expand...
Click to collapse
Which model do you have ?
ilooze said:
I flashed CWM via Rom manager, TWRP via flashify but it's not working. When I boot into recovery it's just the stock recovery, no TWRP no CWM. Any ideas? Am I missing something? Do I need to unlock bootloader? I searched for how to unlock bootloader but I can't find anything. (I managed to root the phone)
Click to expand...
Click to collapse
First, AFAIK, the G2 needs to downgrade to certain build version (???) before able to install custom recovery. In my case, D80020y, all I needed was installing and running the AutoRec app by Cloudyfa (?)
Second, I hope you already know that but worth to remind, you have to enter (press Power button) 3 times from stock recovery to custom (TWRP) recovery mode.
Hello, ive unlocked my bootloader on my h870 and ive flashed twrp. when ive just flashed it i was able to boot into twrp but now everytime i try to boot into it it wil wipe all my data with the stock lg recovery mode can someoneone please help me? Thanks! Just got the phone a few hours ago
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
mprovi_15 said:
You have to install a custom rom or root to make twrp permanent, if you don't do that it will install always after the first boot the stock recovery.
Click to expand...
Click to collapse
Ok but how can i install root or a custom rom when i cannot boot into twrp?
aaflan88 said:
Ok but how can i install root or a custom rom when i cannot boot into twrp?
Click to expand...
Click to collapse
You need to reflash twrp with the bootloader like the first time.
mprovi_15 said:
You need to reflash twrp with the bootloader like the first time.
Click to expand...
Click to collapse
I understand that mprovi but hen again TWRP doesn't boot unfortunately
aaflan88 said:
I understand that mprovi but hen again TWRP doesn't boot unfortunately
Click to expand...
Click to collapse
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
The stock recovery appears but you have to select the factory reset option and it will boot into TWRP
mprovi_15 said:
When you have flashed twrp, you do the buton combination to enter twrp, if you fail to enter twrp a the phone boots into system the stock recovery will be reflashed so you have to reflash twrp.
Try making these:
When you are in the bootloader after flashing twrp press button down+ power button. When the screen turns off quickly stop pressing power button and quickly press again until the lg logo appear.
When the lg logo appear stop pressing power button, quickly press again and stop pressing the power button and press again quickly until you see twrp logo.
These method works for me for booting twrp easily
Click to expand...
Click to collapse
Unfortunately still not succeeded after trying all the solutions i've found here
Hey, i have the same Problem, my TWRP broke, i can't boot into recovery and my Device ist not listed in fastboot mode. Can someone help me out?
I get the ring in windows when i plugin but its not recognizing.. Can someone pls help me out?
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
dwasifar said:
Okay, I'm going to try to explain it, and see if I can succeed where others have not.
You install TWRP by booting to bootloader and using fastboot to push a new recovery:
Code:
fastboot flash recovery twrp.img
It seems like you accomplished that successfully. The next step is to immediately boot to recovery; do not boot the phone to system first. You will get the factory prompts for wiping data, but it will not actually wipe your data this time. Instead it will boot to TWRP.
Now, while you are in TWRP, you need to either root (flash Magisk) or install a custom ROM. If you do not, your next boot to system will remove TWRP and restore the stock recovery. If that happens, then the data-wiping prompts the next time you boot to recovery are real and the phone will wipe. So you MUST - must must must - root or install a custom ROM while you have TWRP up, in order for TWRP to persist.
If you have already experienced this problem, you need to start over at the beginning; flash TWRP again, and then follow the rest of these directions.
Maybe this will help clear up the problem for you guys.
Click to expand...
Click to collapse
Oh my god, i really really thanks for your reply, you're so fre*king good. U made my day.
Guys a little help
I only manage to see the TWRP welcome screen and the the phone automatically reboots to system
I can't get to see the TWRP menu at all!!
WTF is going on?
I have repeated the process many many times and always the same. What i am missing here?!?!?
me too when it boots in twrp only showing logo then it reboots in system what are wedoing wrong?
Got the same problem. I unlocked Bootloader, checked if unlocked (yes). After flashing TWRP i see the TeamWin Screen and phone boot again. There is no TeamWin Menu.
A try with an older TWRP-Version and flashing via fastboot with another PC does not work too.
Anybody an idea?
Did you guys manage to fix it?
Matt.
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
MiR4G3 said:
Hey, for me worked to flash TWRP 3.1.1.0.
3.2.1.0 & 3.2.2.0 still doesn't work.
Greetz
Click to expand...
Click to collapse
With 3.2.1.0, 3.2.2.0 and 3.2.3.0 it only briefly shows the TWRP screen and then boots into system anyway.
With 3.1.1.0 the key combination to boot into TWRP as with the other versions above simply doesn't work, again it directly boots into system without even showing the TWRP screen.
I'm stuck with a resetted phone because of this bull****, because some instructions said "oh, the reset dialog will not really reset your data..." - yeah thanks for nothing, buddy.
So what now?
EDIT: I got it working using TWRP 3.1.1.0, but the same version from the OFFICIAL site didn't work, as I described above.
The only 3.1.1.0 TWRP that works with my phone is the one from this Link: http://downloads.codefi.re/rashed/g6/
(which is linked ... somewhere here in the Forum, don't remember which thread)
Hey
A few hours ago I flashed a boot-image (it was the S9+ black boot image) via TWRP on my SM-G928F. After that my phone does not boot in system or revovery anymore. I can only boot into download mode. I tried to flash a stock rom via Odin but that didn't helped.
I think I need a tar.md5 file of the stock boot-image which I can flash via Odin.
It would be very nice if anyone could help me with this.
Best regards
DGB
DGB100 said:
Hey
A few hours ago I flashed a boot-image (it was the S9+ black boot image) via TWRP on my SM-G928F. After that my phone does not boot in system or revovery anymore. I can only boot into download mode. I tried to flash a stock rom via Odin but that didn't helped.
I think I need a tar.md5 file of the stock boot-image which I can flash via Odin.
It would be very nice if anyone could help me with this.
Best regards
DGB
Click to expand...
Click to collapse
You're on the right track. I think flashing the original stock firmware via Odin should fix the issue, but you said that didn't work...
Rehvix said:
You're on the right track. I think flashing the original stock firmware via Odin should fix the issue, but you said that didn't work...
Click to expand...
Click to collapse
Yes, that's right... It didn't work because the stock firmware doesn't overwrite the boot logo. But is ist possible to integrate the stock boot logo into a custom rom which can be flashed via Odin?
DGB100 said:
Yes, that's right... It didn't work because the stock firmware doesn't overwrite the boot logo. But is ist possible to integrate the stock boot logo into a custom rom which can be flashed via Odin?
Click to expand...
Click to collapse
If that's the issue, you need to flash the stock bootlogo via twrp. If you can't access TWRP though, it'll be kind of hard.
Rehvix said:
If that's the issue, you need to flash the stock bootlogo via twrp. If you can't access TWRP though, it'll be kind of hard.
Click to expand...
Click to collapse
But is there any possibility to do this?
DGB100 said:
But is there any possibility to do this?
Click to expand...
Click to collapse
Yes, but you need the flashable zip. I will upload it when I get to my computer.
DGB100 said:
But is there any possibility to do this?
Click to expand...
Click to collapse
Flash this via TWRP and if the issue is the boot logo then you should be good to go
Rehvix said:
Flash this via TWRP and if the issue is the boot logo then you should be good to go
Click to expand...
Click to collapse
I can't access TWRP, beacuase there is a never ending blackscreen. I can only boot into download mode. That's the problem! I to flashed stock firmware again, I flashed TWRP again. I tried adb sideload - nothing works.
I think there must be a possibility to flash stock boot logo in download mode... but idk how
When you say you say you flashed a boot image, do you mean the splash screen that shows up when you boot the phone up or a boot image that is used to determine what drivers/hardware the phone has when it loads up the OS?
kdogguk said:
When you say you say you flashed a boot image, do you mean the splash screen that shows up when you boot the phone up or a boot image that is used to determine what drivers/hardware the phone has when it loads up the OS?
Click to expand...
Click to collapse
That splash screen that shows up when I boot the phone, so the "picture" on which is "Samsung Galaxy S6 edge + " shown.
DGB100 said:
That splash screen that shows up when I boot the phone, so the "picture" on which is "Samsung Galaxy S6 edge + " shown.
Click to expand...
Click to collapse
Have you tried flashing TWRP again with Odin?
Maybe the boot image somehow corrupted the Recovery. I'm not sure how, but its worth a try. I had problems with TWRP before and had to flash it a number of times in the past cos it got corrupt somehow.
You can get the TWRP img file from TWRP web site to flash in odin.
DGB100 said:
That splash screen that shows up when I boot the phone, so the "picture" on which is "Samsung Galaxy S6 edge + " shown.
Click to expand...
Click to collapse
If you flashed TWRP, try to go straight to it. Starting with the phone off, press the usual key combo for recovery. Keep pressing it even through the blackscreen. If all that's missing is the splash, it should still go into recovery after about 15 seconds.
Hello fellow XDA members!
My 6T, has a issue that i cant figure out! Its runs fine, currently on OS 10.3.8
But when i try to load a custom recovery (TWRP, Paint it Black) I enter the command on my pc (fastboot boot twrp.img) It says on my pc that it booted the recovery but on my phone it goes into fastboot mode logo, and stays there for like 10 seconds, and then i get the famous Qualcomm CrashDump Mode. I have restored the phone as per the instructions (https://forum.xda-developers.com/t/installing-updating-backup-and-restore-guide-for-op6-6t.4254987/) and the phone restore perfectly, but it wont let me flash a custom recovery to root it. Can someone help please?
Would you specify which version of TWRP you are trying to boot please?
gsmccormick said:
But when i try to load a custom recovery (TWRP, Paint it Black)
Click to expand...
Click to collapse
Maybe try official twrp.
Hey, I'm having the same issue. Were you ever able to solve this?
Use this to boot twrp
Brettroth said:
Use this to boot twrp. Then in twrp advanced menu flash this twrp to make it permanent. Reboot to twrp.
Click to expand...
Click to collapse