XT1572 Microphone in calls and charging problem. - X Style (Pure) Q&A, Help & Troubleshooting

I posted my problem in few topics about MY mic problem, but nobody responded, so making my own thread to get visible.
About 5 months ago, my microUSB port was damaged, and it was replaced 2 times in local service.
Motorola refused to repair my device, due to unlocked bootloader.
Now my phone charges only when I plug the cable, and reboot it. No quickcharge since this time, also no connection with pc (only adb via fastboot works).
I was forwarded to other "specialised" service points, because there was needed a special soldering iron (whatever it means) that is extremely costly.
So far any service that had that soldering iron I called refused to do the repair (I think the easiest would b to change motherboard, cannot afford this due to costs)
Both problems appear on ANY (even stock) ROM I've tried so far, I tried nearly every single one from XDA.
Some roms allow to bypass the mic issue, by simply turning the speaker mode on (then the other side hear me, not perfectly but I'm able to talk with them, when speaking loud).
To fix mic I tried everything that I found so far:
-Changes in build.prop for the echo cancellation/noise reduction
-Cleaning the mic hole
-Changes in audio_platform_info.xml file (which contains the input/output devices list)
-Setting permissions for dialer/audio effects app
-Change to a different dialer app
-Disable audio effects app
-Various different stuff like service menu settings (*#*# etc)
-Reflash everything using CORRECT device images (5.1.1, 6.0, 6.0.1)
-Use different kernels
-Other things I forgot due to "fix attempts" ammount
The mic itself WORKS - checked it, by using some call recorder app and service test menu (not on the speakermode ofc).
Everything I say is CLEAR TO HEAR on the playback, just the call receiver cannot hear me. Where is the devil hidden?
Here are my Phone app on stock 6.0.1 latest update permissions that I use right now:
I will try anything, just to make it work like it should.
A note to the usb connection and fastcharge - there is a 24/7 running wakelock from the USB 3.0 controller (at least this is what I found it to be) called f9200000.ssusb, dunno how to trace the process responsible for it, I'm not THAT DEEP into android to figure it out on my own, it propably causes the problem (that's why turned on device doesn't respond for connecting the cable, nor to the PC/1A charger/2A quickcharger [aukey one], I've still got to reboot my phone or turn it off, to start charging my device).
I'm able to flash anything in fastboot mode, works without problems.
Upon trying to charge my moto with quickcharger, Ampere shows that the TurboCharger is connected, then after 2-3s charging stops and starts again, looped forever resulting in no charge at all. Only 1A chargers works.
Screenshot of the wakelock:
Thank everyone for reading this, awaiting for ANY tip, I'm struggled with those 2 probs for already 5-6 months, and I've read all the over 100 pages of Q&A without finding the solution, I've finally decided to post it on my own.

Are you still having problems with the Mic?

Mic problem won't go away affecting xt1575

Mycroftski said:
Mic problem won't go away affecting xt1575
Click to expand...
Click to collapse
Here are two things that were done to over come my problem, first thing was to clean/open-up the speaker hole that's on the back of the phone (odd place), I also turned off "Enhanced 4G LTE Mode".
Also remember since the mic is on the backside, flip the phone over when using this feature so you're not blocking the mic hole, because it's very tiny.
These steps worked for me but your problems may be different.

Related

New phone misbehaving

I've never participated in a forum where experienced members refused to assist others. Even other xda forums seem more helpful than this Athena forum.
I bought an x7501 off ebay a few days ago, and I've been playing with it. It's performance is not consistent, and I'm wondering if it is defective.
It was sold as NIB (new in box) and it appeared to be unopened when I received it, but I can't be 100% certain that is the case.
Some simple operations are grossly slow. The problems are intermittent, the worse kind to trouble shoot. Recently, I tapped on the CommManager icon on the Today screen at it took 15 seconds to open CommManager.
When I first received the unit, I installed Google Maps and tried out the GPS. I was able to connect to GPS inside my house. This morning I couldn't connect in my car, and when I stopped the car, I tried to connect standing outside in the open. After about five minutes, it wouldn't connect, so I went inside my house, and after a few more minutes, it did connect. While I was waiting for it to connect, I got my Kaiser and opened Google Maps and connected to GPS withing a few seconds outside in the open.
I had installed Opera 9.5 beta and NetFront 3.5 as well as RealVGA and MvRTrueVGA, and after running into strange display artifacts and bugs in the beta browsers, I decided to clear everything out, and ran the Clear Storage utility in System Settings. I had done this once before when trouble shooting failed attempts to connect the Athena to my Belkin Pre-N WiFi router.
So, now, all that's installed other than the what came on the phone is Google Maps and NetFront 3.5.
The battery performance is also a bit strange to me. It seems to be discharging even when I have it connected to my computer using the USB cable. Nothing is open in the background, and I wasn't using it, but it showed 70% when I connected it, and thirty minutes later it showed 60%. Is that normal?
Is the ROM that shipped with the phone questionable?
Might I get better, more reliable, more consistent performance with one of the ROMs available here?
I'm not ready to give up, but I'm not encouraged at the moment, and I'm not sure what to do next.
May I suggest Dual PK 3.0. Try backing up all that you have now and flash it with Dual PK and let us know the update.
Regarding the battery drain issue, most computer USB ports and non-factory chargers don't give enough power to even maintain (let alone charge) if you have all the radios on. Especially the GPS radio which seems to need a lot of power - I can go all day with the cell and bluetooth radios on and still have 90% charge after 16 hours, with little cell or internet use. But if I turn on the GPS it will be discharged within a few hours.
Computer USB ports are usually limited to 500 milliamps, and some chargers are less, so the only good solution is to only use the factory charger if you have everything on. Turn down your screen brightness, too. I leave mine at 50% both on the battery and when plugged in, except in full sunlight.
As for the GPS reception, its very bad. I have a sirf/star mouse-style GPS unit which locks on within seconds in the middle of the 1st floor of my 2-story house, attached to my Palm or a computer. My X7501 usually won't lock on even when I'm near a window. I rarely have a problem outside or in my car, though. I'm one of many that have reported similar issues.
I usually don't see slowdown issues, but I sometimes do if the wifi or GPS radios are on. Try only running cell and bluetooth for a while and see if that helps. I also found that Opera would slow down more, and then more, and even more as the cache filled up, but that was after I changed it from the default "1000". I cleared my cache and changed it back to the default cache size and I've been fine since.
Hey TnT,
Thanks for the detailed feedback. I'm going to play with it some more. I'm planning on flashing a different ROM, as TT2 suggested.
Which ROM are you running?
Try PK dual black... but don't for get to Hard SPL...
Please don't install anythink on your Harddisk, just install on storage card... My athena run fastrer if i put seftware on SDcard... If install ti HD it will slower.. i've tried it
thanks cornelius, i'm in the process of gathering the info and parts to install a new ROM. I've downloaded the "AP Dual 3.0 ROM" - I think that's the same thing as the PK Dual Black. I've also downloaded the AthenaUnlocker.exe - I think that's the hard spl you mention.
I bought my phone unlocked - I gather that's SIM unlocked, and the AthenaUnlocker will CID unlock it, which is necessary before installing the new ROM.
I'm trying to confirm everything, so I don't brick the phone, but I'm the information is scattered all over the forum and wiki. I found two versions of AthenaUnlocker.exe, both version 1.0.0.0 with different time stamps. I tried to watch a video of unlocking, but there was no audio.
I would appreciate any additional pointers in the process.
Thanks
Im running the factory ROM.
xdafile said:
thanks cornelius, i'm in the process of gathering the info and parts to install a new ROM. I've downloaded the "AP Dual 3.0 ROM" - I think that's the same thing as the PK Dual Black. I've also downloaded the AthenaUnlocker.exe - I think that's the hard spl you mention.
I bought my phone unlocked - I gather that's SIM unlocked, and the AthenaUnlocker will CID unlock it, which is necessary before installing the new ROM.
I'm trying to confirm everything, so I don't brick the phone, but I'm the information is scattered all over the forum and wiki. I found two versions of AthenaUnlocker.exe, both version 1.0.0.0 with different time stamps. I tried to watch a video of unlocking, but there was no audio.
I would appreciate any additional pointers in the process.
Thanks
Click to expand...
Click to collapse
Just make sure you've got a fully charged battery before attempting to unlock or flash the ROM. If you have any particular question feel free to jump back in and post it. Oh and btw The PK Dual is what I was talking about in my last post...Sorry if it seemed a bit confusing.
I'm getting a error when I attempt to unlock my phone.
I ran version 3.12.3.3 of AthenaUnlocker.exe. The error is 202 connection.
the update utility cannot connect to your pda phone. please check that your usb cradle/cable is connected properly between the pc and your pda phone.
check the following:
1. the pda phone is connected to the usb cradle/cable.
2. the usb cradle/cable is connected to the pc.
I know the phone is connected. It is synchronized with ActiveSync 4.5, and it shows that it is connected.
Maybe I don't have the correct version of AthenaUpdater?
I've made progress with the AthenaUpdater.exe program.
I noticed that I had to take an action on the phone after I started the update process. I didn't notice that before, and there is nothing in the program that tells the user to check the phone.
Anyway, step one completed, and I completed step two.
Now, the phone won't turn on. I remember reading about a special key combination, and I'm wondering if I need to do that to get it to turn on and complete step three.
If I get through this successfull, I am going to update the wiki with a how-to for the next guy new to the Athena.
I found the key combination to get into the bootloader,
camera - power - reset
I continued with setp three of the AthenaUpdater, but I think because of the errors, the update did not work properly.
The phone will still not turn on.
I can get it to go into the bootloader, but I don't know what to do next.
I would really apreciate if someone who know what to do would post some helpful comments now.
Thanks
when I go into bootloader it displays
ATHE100
IPL-V2.02
ATHE100
SPL-v1.20.Olipro
At this point, can I install the AP Dual 3.0 ROM?
I installed AP Dual 3.0 with no problem.
However, GPS seems to be not working.
Do I need to run the AthenaUnlocker.exe again?
Does that mean I'll have to reinstall the AP Dual 3.0 ROM again?
Wish I could help you, but I've never updated my ROM. Maybe the version coming on the X7510 will entice me to try.
What error are you getting when you try to run Google Maps? If you get an immediate error, your ports aren't set right. If it spins its wheels for a while the ports are right but the fickle GPS is taking its time.
Tonight I'm going to try and straighten things out on my Athena.
I hope I don't have to spend hours at it again. It would be great if someone who know has experience with the unlocker and the AP Dual 3.0 ROM could spend a few minutes answer my questions so I won't have to spend a few hours sweating through the upgrade process. Last night I literally was as sweaty as if I had gone for a jog; I was surprised at how stressful the upgrade process was for me (I mean, it's only a few hundred dollars if I brick it, right?)
The state of my Athena now is: I probably botched the unlock process in step two, because my GPS is no longer working.
Can I just run the AthenaUnlocker again, or do I need to first flash back to the original x7510 HTC ROM?
After I run the unlocker again, do I need to flash the AP Dual 3.0 ROM again?
I'm also wondering why I ran into problems with the unlocker, and concerned that I'll just encounter the same problems again. I'm hoping that because I have the AP Dual 3.0 ROM installed, the unlocker will perform differently and without errors.
If anyone is reading this who knows the anwser to my questions, I'd really appreciate hearing from you.
Thanks
techntrek said:
What error are you getting when you try to run Google Maps? If you get an immediate error, your ports aren't set right. If it spins its wheels for a while the ports are right but the fickle GPS is taking its time.
Click to expand...
Click to collapse
Error message???
TechNTrek,
Thanks again for pitching in to offer me help.
Good new for me; The GPS started working. Earlier this morning, I decided to try it again outside, giveing it more time, and it connected. It had been bringing up a message screen telling me about connection problems.
I just tried to bring up the can't connect message screen by attempting to connect while inside my house, but the darn thing connected with 7 active satellites, and I can't reproduce the problem now to give you a detailed error description.
So, even thought I got a bunch of error messages during my unlocking process, the unlocking seems to have worked, and it left my Athena in working condition.
Some final notes relating to how I started this thread: now that I have AP Dual 3.0 ROM installed, the device seems to be performing better in all the problem areas I first mentioned.
I tested charging the battery by connecting to my computer's USB port, and, although it is charging slowly, at least it's not discharging while connected.
I think that experience discharging while connected might have been because Opera 9.33 beta was open to a page the was running something - just speculation.
I think it's also possible that I misinterpreted what I saw; it might not have been discharging while connected; instead, it might have been a delay in updating the display of the state of the battery; when I looked at the battery when I first connected to the USB, it showed 70%, but in reality it might have only been 60% charged, and the display had just not updated; then, when I disconnected it, the display had updated to the correct 60%.
Also, I haven't noticed any of the extremely slow performance when open apps or running apps. I did notice that my old Kaiser is a lot snappier than the Athena before I updated the ROM. I'm going to keep an eye on it, and do some more Kaiser/Athena performance comparisons.
I think the Athena may be slower than the Kaiser because of the video driver issue. The Athena has four times as many pixels to render, and the CPU has to do the rendering since the driver that would take advantage of the ATI video processor is absent. Hopefully, that will be fixed soon, as mentioned at HTCClassAction.org. http://www.htcclassaction.org/
I am going to start a new thread on a couple of questions I have. In the original HTC ROM, there was a network program from HTC, and I used it to connect to shares on my LAN over WiFi, and I want to find a replacement for it. There may even be a network program in the Dual 3.0 ROM, but I haven't found it yet.
Also, I love MS Voice Command 1.6 (a version made available in the Kaiser forum - not a more recent 1.6 version for sale by MS.) It works for me on my Wizard and on my Kaiser, but on my Athena, I can't start Voice Command using my Bluetooth headset.
I've searched both of these issues in the forums, but haven't found answers yet. Again, if anyone knows, please help.
Now, I'm going to explore the 3.0 ROM!
xdafile said:
TechNTrek,
Thanks again for pitching in to offer me help.
Good new for me; The GPS started working. Earlier this morning, I decided to try it again outside, giveing it more time, and it connected. It had been bringing up a message screen telling me about connection problems.
I just tried to bring up the can't connect message screen by attempting to connect while inside my house, but the darn thing connected with 7 active satellites, and I can't reproduce the problem now to give you a detailed error description.
So, even thought I got a bunch of error messages during my unlocking process, the unlocking seems to have worked, and it left my Athena in working condition.
Some final notes relating to how I started this thread: now that I have AP Dual 3.0 ROM installed, the device seems to be performing better in all the problem areas I first mentioned.
I tested charging the battery by connecting to my computer's USB port, and, although it is charging slowly, at least it's not discharging while connected.
I think that experience discharging while connected might have been because Opera 9.33 beta was open to a page the was running something - just speculation.
I think it's also possible that I misinterpreted what I saw; it might not have been discharging while connected; instead, it might have been a delay in updating the display of the state of the battery; when I looked at the battery when I first connected to the USB, it showed 70%, but in reality it might have only been 60% charged, and the display had just not updated; then, when I disconnected it, the display had updated to the correct 60%.
Also, I haven't noticed any of the extremely slow performance when open apps or running apps. I did notice that my old Kaiser is a lot snappier than the Athena before I updated the ROM. I'm going to keep an eye on it, and do some more Kaiser/Athena performance comparisons.
I think the Athena may be slower than the Kaiser because of the video driver issue. The Athena has four times as many pixels to render, and the CPU has to do the rendering since the driver that would take advantage of the ATI video processor is absent. Hopefully, that will be fixed soon, as mentioned at HTCClassAction.org. http://www.htcclassaction.org/
I am going to start a new thread on a couple of questions I have. In the original HTC ROM, there was a network program from HTC, and I used it to connect to shares on my LAN over WiFi, and I want to find a replacement for it. There may even be a network program in the Dual 3.0 ROM, but I haven't found it yet.
Also, I love MS Voice Command 1.6 (a version made available in the Kaiser forum - not a more recent 1.6 version for sale by MS.) It works for me on my Wizard and on my Kaiser, but on my Athena, I can't start Voice Command using my Bluetooth headset.
I've searched both of these issues in the forums, but haven't found answers yet. Again, if anyone knows, please help.
Now, I'm going to explore the 3.0 ROM!
Click to expand...
Click to collapse
To get MS 1.6 to work try this:
Delete the paird BT headset, then do a reset on the phone then re-pair with the BT headset. Make sure the headset is not set to (stereo) mode and that should work. I had the same issue with the Jabra BT8010. After doing the above steps the push button activation innitiated voice command.
Thanks TootTalk2000,
That worked. I have the Jabro BT8010 too.
Have you figured out how to get the BT to work hands free and stereo too?
xdafile said:
Thanks TootTalk2000,
That worked. I have the Jabro BT8010 too.
Have you figured out how to get the BT to work hands free and stereo too?
Click to expand...
Click to collapse
Yeah, when you set it to stereo however, all the audio gets routed to the BT headset (I personally don't like that, especially when using my GPS) and in order for you to use voice command then you have to take stereo/mono button which is the button closest to the mic on the bottom of the BT, then hit the answer button and you will hear VC prompting for your command. The draw back to this also is that everytime you want to use VC you will have to repeat these steps because the BT defaults back to stereo after you're don't with a voice call.

Report issues that you may experience using wp7 (share your problems ) for HD2

I created this thread to list all peoblems on HD2 that may face you to be reported for the developers (share your problems )
list of problems you may suffer from (not all users have all problems in the list ):
1. buttons backlight doesn't work
2. multitouch is buggy and stops working allot (when zoooming )
3. no autofocus in camera , and pictures are so bad
4. big noise in videorecording and very noisy voice
6. loud speaker is very loud
7.wifi mac address will change if you reboot the phone
8. charging problem when the device is off (magldr issue )
9.Support For 1024LEO full Capacity (currently limited to 512)
10. market takes allot of time to verify purchase and download (wp7 issue or just us ? )
11. battery meter not accurate at all, and very high battery usage
12. some htc applicaions doesn't work (audio booster ) works ut make no change
13. flash on camera and green tint
14. light sensor in extreme dark conditions (corrupted as in android ) needs testing not sure
15. rebooring problems
16.FM radio is very loud even with the volume on the minimum setting.
17. sync contacts names problems (may be wp7 )
18. service provider settings (like charge , pay pill ) in windows 6.5 and android doesn't exist (wp7 problem , may be ) .
19. digital compass , is it working or not and how to test it
20.mms, can't change apn for mms
21.No headset icon when headset is bluged
22.push tiles update issue
23.Only the left headset works when make call.
24. mic doesn't work when headset is bluged in
25. Phone remains "locked" after MS activation, no amount of unlocking works. *mod edit - try method 2 : here *
Notes:
A. some issues are windows phone 7 related that we should wait for microsoft to fix them see the list here : http://forum.xda-developers.com/showthread.php?t=836373
B. I will request the next rom update to be an hd7 reg edited as default , so that we will only need to use the activation code without cracking the phones security with (chevron wp7.exe ) as with the next microsoft ypdate we will not be able to use it any more.
C. All problems are being repeated now , i think the list above includes it all ,one more day and i will be reporting all these issues on the chinees forum , or to cotulla ,
A very big problem don't let your phone empty its charge as it can't be charged while it is off and it will die unless you find a way to charge it externally​
I hope that cotulla this repaired
Speciall the camera
wifi problem, phone don't open the site but is connect to the router
WiFi problem - I can't see all WPA secured WiFi networks, I can find (and connect) my WiFi at home, but at work, HD2 doesn't see WiFi there...
Yesterday I answered the phone and the opposite side can't hear me (radio 2.15.., I don't know, just the last version)
Sometimes the phone is little bit laggy, I think, that the problem is in the SD card, when I used the phone w/o card (before hard-reset ofc), everything was faster
1. Speaker is very loud
2. Hope Market will be soon available for all.
I will be updating the list issue periodically and I might register to dft forum to report it all if he is not going to xda anymore
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
It's a MagLDR issue
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
Known issue with Magldr.
Warning!
Installed win phone 7 on my HD2, and it formated my 16 gb memory card in a secured partition, all data was erased, and i could not format it using any windows tools, so the only solution for me was to "Hard" Format it using a free software called SDFormatter, it formated and brought back to life my microSD Card.
So people, back up your data before flashing.
So far one issue: it takes quite a lot of time to turn off the phone
Regarding the camera, using flash gives green tint. No other problems from the reported ones.
HannoSLM said:
Regarding the camera, using flash gives green tint. No other problems from the reported ones.
Click to expand...
Click to collapse
how is multitouch with you allot of reports say it is corrupted
Battery
Moonblood said:
When i try to charge my battery with the phone completely off and the phone begins to charge but in a few minutes the led turns off and the phone does not turn on except for remove the battery.
battery charges only when phone is turned on. Does anyone has this issue?
Click to expand...
Click to collapse
For me is the same, it came with the new magldr for WP7.
JanHavlicek said:
WiFi problem - I can't see all WPA secured WiFi networks, I can find (and connect) my WiFi at home, but at work, HD2 doesn't see WiFi there...
Yesterday I answered the phone and the opposite side can't hear me (radio 2.15.., I don't know, just the last version)
Sometimes the phone is little bit laggy, I think, that the problem is in the SD card, when I used the phone w/o card (before hard-reset ofc), everything was faster
Click to expand...
Click to collapse
I had the same problem. I've noticed that the wlan channel from my wlan router was 13. I switched the channel to 11 and then WP7 find my wlan...
So, WP7 doesn't support wlan channels higher then 11...
wifi mac address will change if you reboot the phone.
The type isn't clear when you scroll down or up in the system menu, it takes a little bit time when the type is clear again.
The next problem for me is that I don't know how to set up wireless synchronization, I think I've done everything according to Microsoft pages, but it doesn't work for me.
And then I have the same problems like you, loud speakers, camera...
Well, after reading most of the posts here I guess I was lucky, WiFi and Mobile data connection worked for me, the phone was fast (faster than Android).
The whole WP7 seems to be 'airy' and not so heavy as Android, I liked the look of emails, large and clear fonts, easy to read and navigate. But on the whole, the system seems to be too closed off, not much customization is available.
I did manage to unlock it and install some 3rd party apps but soon the phone would give me a message that 'Microsoft has revoked' the particular program. Also the phone keeps locking itself over and over. I got tired of unlocking it every time I wanted to install a new app. Sometimes it worked, sometimes it did not. Had to either reset the phone or PC many times in order for things to work.
Does anybody know a solution to this?
I could have asked MS to give me the 'key' so that live services could be used but was not sure I want to keep this OS on my phone. It may be similar to Vista issue, a nice looking OS but buggy. Somehow I have a feeling that a new and (much) improved WP7 is around the corner.
Couple of tips:
If you want to sync your contacts, calendar, etc., the easiest way is to go through Google. If you used an Android ROM before this should not be a problem. Back up all your contacts in Android by using your Google account, once you are in WP7 go to Settings - People - Gmail and sign in. It will automatically sync your contacts to the phone - painlessly. You can also choose not to have your Facebook contacts mixed with the phone's ones. Up to you.
If you want to revert back to WinMO 6.5 or Android:
- take out your SD card first
- turn off your phone and then hold the Vol Down key as you press and hold the Power button (get into Bootloader screen)
- flash the official ROM (3.14 RUU is recommended)
- use your photo camera to format your SD card (if you have a card holder, stick in, and then format)
- if you wish you can format your SD card again once you put it back into your phone and plug it into your PC
It worked for me. I am using my SD card again to run Android (flawlessly)
tlerner said:
Well, after reading most of the posts here I guess I was lucky, WiFi and Mobile data connection worked for me, the phone was fast (faster than Android).
The whole WP7 seems to be 'airy' and not so heavy as Android, I liked the look of emails, large and clear fonts, easy to read and navigate. But on the whole, the system seems to be too closed off, not much customization is available.
I did manage to unlock it and install some 3rd party apps but soon the phone would give me a message that 'Microsoft has revoked' the particular program. Also the phone keeps locking itself over and over. I got tired of unlocking it every time I wanted to install a new app. Sometimes it worked, sometimes it did not. Had to either reset the phone or PC many times in order for things to work.
Does anybody know a solution to this?
Click to expand...
Click to collapse
After unlock the phone, you have to use 2 softs :HTC Connection Setup and Tom WP7 Jailbreak in order to prevent from MS remote lock. Have you used it before?
some issue
My Leo restarts after about an one-two hours .
When I click the red phone, then again, Leo wake up after one minute , restart or doesn't wake up .
The second issue is when Leo is restarting , all information disappear - just like in hard reset .
It's not very stable and vast ;(

[Q] Just a list of the problems I'm facing...

I apologize in advance if this is a repeat post in any way. I have searched a lot through the forums and didn't really find the answers I needed. It's very possible I missed them, with the millions of posts, so I thought I might make a post of my own.
I got my Nexus 4 a couple days ago and I'm facing the following problems:
1. Battery drain is ridiculous. I'm getting 12 hours with fairly light usage (I don't do any gaming), but everything (except Bluetooth) turned on
2. My charger makes a weird humming noise when the phone is not plugged in
3. When I'm on a call, I lose data 90% of the time, and I constantly lose service in places I have never had any problems
4. If I have my phone plugged into my car via aux cable, phone calls sound funny. It sounds like the person is standing ten feet away form their phone.
5. My earpiece has a weird noise to it
6. If I tap the phone on top, it sounds like something is lose in there
7. I can't run a Speedtest for the life of me, and I can't find APN settings that fix that for me
Is anybody else facing these problems? I'm afraid my device is faulty, but I don't want to wait 2 months to get a replacement...
Everyone of your " problems" has its own thread. I'd point you in the right direction for a few of them, but I'm busy at work. I just figured i'd let you know to search and you'll find what you're looking for
Sent from my Nexus 4 using xda app-developers app
AssassinFuze said:
I apologize in advance if this is a repeat post in any way. I have searched a lot through the forums and didn't really find the answers I needed. It's very possible I missed them, with the millions of posts, so I thought I might make a post of my own.
I got my Nexus 4 a couple days ago and I'm facing the following problems:
1. Battery drain is ridiculous. I'm getting 12 hours with fairly light usage (I don't do any gaming), but everything (except Bluetooth) turned on
2. My charger makes a weird humming noise when the phone is not plugged in
3. When I'm on a call, I lose data 90% of the time, and I constantly lose service in places I have never had any problems
4. If I have my phone plugged into my car via aux cable, phone calls sound funny. It sounds like the person is standing ten feet away form their phone.
5. My earpiece has a weird noise to it
6. If I tap the phone on top, it sounds like something is lose in there
7. I can't run a Speedtest for the life of me, and I can't find APN settings that fix that for me
Is anybody else facing these problems? I'm afraid my device is faulty, but I don't want to wait 2 months to get a replacement...
Click to expand...
Click to collapse
nope. perfectly fine here
1. may GPS and other background syncing is causing the problem?
2. No sound here.
3. You shouldnt lose data while on call...you should be able to call and have data at the same time
4. Havent tried since the base of the aux is too big to fit
5. the earpiece is known to have static/buzzing noise if your talking about that
6. most probably its the camera. its been noted that if you place your phone down (back first) it rattles...that is due to the camera. If you shake it, then its another metal piece inside that rattle. i have both, though it rattles, i dun "feel" any loose parts
7. what carrier are u using for apn?
can you define "searched a lot?"

issues with cm12.1 [5.1.1] [nightly]

First of All Thanks to CM dev's for this awesome roms they have been providing us.
But for some time now, I have been facing some odd issues with my cell.. I'll describe them over here.. Here it goes
1. Issues with OTG Pendrives
This is a weird one i must say for me at-least. The problem is whenever i connect my OTG pendrive to my cell phone. either my cellphone does a soft restart and then loads it(along with it, it also disappears all my apps which are stored in my memory card. thus i cant access them also.) OR it will just my pendrive but again by making my apps in memory card disappear.(in both the scenario my memory card is unmounted everytime, hence the disappearing of apps.)
2. Issue with Loudspeaker.
I had this issue with My stock rom also(i am just adding it here so that atleast someone here might know the solution.). so the problem goes this way. whenever i tried/try(as in now on cm12.1 and in stock rom) a video/song/any file with sound in it, the loudspeaker just plainly wont work. It was like it had his own mood then whenever it wants it'll otherwise it wont. so This problem is still going on in Cm12.1 since i have installed cm on my Xperia SP device. i just cant figure out the issue as to why this is happening. since when i make a call the front speaker through which we hear also doesn't work. But if i turn loudspeaker option on then it will work properly(the loudspeaker). and i can play songs also at that point of time(this is what is odd in this, ie i can play songs while on call via loudspeaker but i cant play while normally i try to play them.).
3. battery drain issue
every i am using my cellphone and i see that my battery is at 5%. i have to look for charger because. when my cellphone shows me 5% on the very next min it will show me 0% and shut down the system. this is sometimes annoying since it will show 8% (below 10% you can say) and the very next min i get the problem that the system is shutting down. this gets annoying when i am doing some important stuff and i suddenly shuts down
If anyone over here know the solution to this issues, please help me with them. since it is literally frustrating sometime that i have to wait for my cell to soft reboot just to access some data in it.
Thank you.
2. might be a hardware problem (I won't confirm this, wait for other people)
3. It just prevents you from getting into a BIG Problem....(to keep some battery reserved to respond to offline charging)
If you use the Device's Battery to its fullest, It would get completely turned off, and if unluckily if Offline Charging didn't work... Its GONE
Sent from my Xperia SP using Tapatalk
Arvind7352 said:
2. might be a hardware problem (I won't confirm this, wait for other people)
3. It just prevents you from getting into a BIG Problem....(to keep some battery reserved to respond to offline charging)
If you use the Device's Battery to its fullest, It would get completely turned off, and if unluckily if Offline Charging didn't work... Its GONE
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. I see why in 2nd problem i am facing such issues. but I just hope that on connecting OTG pendrive and cell restarting issue is resolved as soon as possible.

Nexus 7 To Replace Head Unit

Good afternoon,
So after seeing a bunch of videos and out of boredom I ordered almost all the pieces to make the switch. Was amazed by how simple it was until I noticed that the OTG cable was not supported by the Nexus 7? And that to my understanding I would have to root and install a custom rom in order to do this?
Well I did some research and found timurs rom and installed it. Well noticed gapps wasn't installed. Went to install gapps then I spent an entire Saturday trying to get it to work with no avail. I'm not skilled in this line of work. Alot of the articles I'm finding are from 2012 -14.
Just wanna make sure I'm making the right steps not sure if there has been a new way of doing this or possibly an easier method? Would greatly appreciate it if someone could assist with this.
I would love to have GAPPS on which ever ROM will give me the requirements to install the Nexus as my head unit. Im just not entirely sure how to get it to work proplery. I apologize for my lack of knowledge in advance.
List of parts
-nexus 7 (wifi)
-radio harness
-otg
-usb hub
-dac (behringer UCA222)
As well as some other misc items such has a volume knob, just awaiting the Amplifier.
Thank you for your time, hopefully someone can help me with this :good:
So from what I've gathered Autodroid is the newest rom, just downloaded it. Will be giving it a shot tonight. If someone could help me with Google apps and installing it on there that would be awesome!!!
BlackenWkN7714 said:
So from what I've gathered Autodroid is the newest rom, just downloaded it. Will be giving it a shot tonight. If someone could help me with Google apps and installing it on there that would be awesome!!!
Click to expand...
Click to collapse
For Autodroid, look for Slim-Addons-mini_gapps.4.4.4.build.9-20150107.zip from Here.
I had issues with OTG+Charging with Autodroid, but the more i have been tweaking and trying different things, I think the high temperatures were what caused the tablet not to charge. Monitoring the battery, I have noticed when the temp is over say 110* F, it will not charge, but will hold the charge and not drain the battery. The lower the temp gets the faster it starts charging.
I would suggest not converting to F2FS if you plan to use OTG. I could not get it to work properly.
I'm currently running LineageOS 14.1 with Powereventmanager 1.8 installed. This has been working well for me the last week or so, but some issues have me wanting to go back to Autodroid. One issue i've noticed lately with LineageOS is the sound quality doesn't seem as good as Autodroid. It sounds decent for my factory system, but what bugs me is the volume control is not sensitive enough, its either way too loud or too quiet. There may be ways to fix this though, as i have not had time to research a fix. I dont run a DAC, I run my tablet via bluetooth to a headunit hid behind the tablet, so you may not have this issue.
Another issue i have is with PowerEventManager. It will put the tablet to deep sleep, but usually not the first time i turn the ignition off. I have to turn the ignition back on then off, then it will trigger powereventmanger. No big deal, but is a pain since i have to constantly make sure it does go to sleep.
You can also add the volume control buttons to the nav bar through the "buttons" setting. You can add media controls too. This works well for the most part, but there are times the icons disappear, though the control is still functional. I think this issue is caused by my icon size, but not 100% sure.
B|acknd said:
For Autodroid, look for Slim-Addons-mini_gapps.4.4.4.build.9-20150107.zip from Here.
I had issues with OTG+Charging with Autodroid, but the more i have been tweaking and trying different things, I think the high temperatures were what caused the tablet not to charge. Monitoring the battery, I have noticed when the temp is over say 110* F, it will not charge, but will hold the charge and not drain the battery. The lower the temp gets the faster it starts charging.
I would suggest not converting to F2FS if you plan to use OTG. I could not get it to work properly.
I'm currently running LineageOS 14.1 with Powereventmanager 1.8 installed. This has been working well for me the last week or so, but some issues have me wanting to go back to Autodroid. One issue i've noticed lately with LineageOS is the sound quality doesn't seem as good as Autodroid. It sounds decent for my factory system, but what bugs me is the volume control is not sensitive enough, its either way too loud or too quiet. There may be ways to fix this though, as i have not had time to research a fix. I dont run a DAC, I run my tablet via bluetooth to a headunit hid behind the tablet, so you may not have this issue.
Another issue i have is with PowerEventManager. It will put the tablet to deep sleep, but usually not the first time i turn the ignition off. I have to turn the ignition back on then off, then it will trigger powereventmanger. No big deal, but is a pain since i have to constantly make sure it does go to sleep.
You can also add the volume control buttons to the nav bar through the "buttons" setting. You can add media controls too. This works well for the most part, but there are times the icons disappear, though the control is still functional. I think this issue is caused by my icon size, but not 100% sure.
Click to expand...
Click to collapse
Hey thanks for the response!!
I ended up getting timurs rom to work. I attempted to go with Autodroid but it would never load up. Attempted timurs rom and it worked and figured I'd try gapps and finally it worked perfect and I have no issues now.
Now I'm trying to find the best method to incorporate Bluetooth to the car. I'm replacing my entire head unit with the tablet. I wanna be able to play music from my phone and have it come out of the cars speakers.
Any suggestion on that?
BlackenWkN7714 said:
Hey thanks for the response!!
I ended up getting timurs rom to work. I attempted to go with Autodroid but it would never load up. Attempted timurs rom and it worked and figured I'd try gapps and finally it worked perfect and I have no issues now.
Now I'm trying to find the best method to incorporate Bluetooth to the car. I'm replacing my entire head unit with the tablet. I wanna be able to play music from my phone and have it come out of the cars speakers.
Any suggestion on that?
Click to expand...
Click to collapse
Autodroid, you have to flash the kangaroo kernel after you flash the rom. there are people that say you have to flash a version of SlimKat and dirty flash Autodroid over it, but i never had to do this.
Check out HeadUnit Reloaded. it is an Android Auto clone. allows you to make a receive calls, stream music from your phone. There is a 5 minute trial, so make sure you have everything set up before you give it a try.
I've been debating on switching to a DAC, just so i can have better volume control. Something about using software buttons for control is just a pain. I've also thought of hard wiring my removable face from the head unit to somewhere it is accessible, but not sure i want to go through the trouble.
Have you thought of just using the phone as a hotspot and using your tablet for everything else? This is what i do and it saves me from having to fidget with my phone all the time.
Another tip for you, though i dont know what DPI Timurs rom is set at, but on AutoDroid I always increased the DPI to make things on screen larger and easier to control, since it is in a vehicle. I believe i had mine set at 230..
I'll be switching back to Autodroid this evening. the bugs i encounter using LineageOS have just been too much to deal with. Worked great for awhile, just need something more stable and worry free.
B|acknd said:
Autodroid, you have to flash the kangaroo kernel after you flash the rom. there are people that say you have to flash a version of SlimKat and dirty flash Autodroid over it, but i never had to do this.
Check out HeadUnit Reloaded. it is an Android Auto clone. allows you to make a receive calls, stream music from your phone. There is a 5 minute trial, so make sure you have everything set up before you give it a try.
I've been debating on switching to a DAC, just so i can have better volume control. Something about using software buttons for control is just a pain. I've also thought of hard wiring my removable face from the head unit to somewhere it is accessible, but not sure i want to go through the trouble.
Have you thought of just using the phone as a hotspot and using your tablet for everything else? This is what i do and it saves me from having to fidget with my phone all the time.
Another tip for you, though i dont know what DPI Timurs rom is set at, but on AutoDroid I always increased the DPI to make things on screen larger and easier to control, since it is in a vehicle. I believe i had mine set at 230..
I'll be switching back to Autodroid this evening. the bugs i encounter using LineageOS have just been too much to deal with. Worked great for awhile, just need something more stable and worry free.
Click to expand...
Click to collapse
I have thought about being able to supply a hot spot with my note 5. I found ways of getting around it without rooting it but those have seemed to be disabled. Still hoping to come across a simple way of doing it without paying for it or rooting the phone since I'm currently on the "lease program". I plan to keep the phone once I'm finished paying on it so I believe I should have an issue. I just don't wanna end up screwed if for some reason I have to turn it in and I get hit with a large fee since it's rooted.
I will definitely look into that app, can it be connected thru Bluetooth or just wifi? If wifi I will have to wait until I figure out how to make my phone wifi tethering enabled.
Also I though of an idea, I have found the Bluetooth devices for everyday car stereos. Box with usb to charge and an aux to plug into the car audio. My Dac has an input and an output. I'm currently not using the input since it's all thru usb. I'm wondering if I can hook up the $20 Bluetooth piece and then aquire a female 3.5 aux cable to make rca and hook that up to the input on the dac.
BlackenWkN7714 said:
I have thought about being able to supply a hot spot with my note 5. I found ways of getting around it without rooting it but those have seemed to be disabled. Still hoping to come across a simple way of doing it without paying for it or rooting the phone since I'm currently on the "lease program". I plan to keep the phone once I'm finished paying on it so I believe I should have an issue. I just don't wanna end up screwed if for some reason I have to turn it in and I get hit with a large fee since it's rooted.
I will definitely look into that app, can it be connected thru Bluetooth or just wifi? If wifi I will have to wait until I figure out how to make my phone wifi tethering enabled.
Also I though of an idea, I have found the Bluetooth devices for everyday car stereos. Box with usb to charge and an aux to plug into the car audio. My Dac has an input and an output. I'm currently not using the input since it's all thru usb. I'm wondering if I can hook up the $20 Bluetooth piece and then aquire a female 3.5 aux cable to make rca and hook that up to the input on the dac.
Click to expand...
Click to collapse
I'm not sure about Bluetooth with Headunit reloaded... you can use USB. To be able to make and receive calls, you have to have it connected to a "Bluetooth headset" according to their page, but i think this is just for phone calls.. I could be wrong though. I've been curious if my head unit would act as a "headset" since my tablet is connected through Bluetooth...
One day I will buy the app and play with it more, I'm just cheap
About your DAC, I dont see why that wouldn't work. I've read of people using stand alone Bluetooth adapters with their DAC. But like i said before I dont know anything first hand when it comes to DAC's.

Categories

Resources