sprint gs4 data does not work on cyanogenmod 12 - Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshoot

I picked up an unofficial build of cyanogenmod 12 recently and now I cant connect to data. Texts and calls work fine however. I tried doing airplane mode on/off but that did not seem to work. I also tried switching from 3g to lte in the wireless settings, that didnt work. I also tried using *#*#4636#*#* and tried changing the provider settings thing to CDMA (LTE) and that didnt work. I need help PLEASE. Nothing had worked thus far and my sprint data does not work at all. Please, does anyone have a solution?

Related

Not longer seeing telus

Hi All,
Not quite sure what happened here.. Upgraded to latest nscollab yesterday, everything was working fine. Decided to try the "Antennas" app to see if it'd show where the towers are near me, switched to 2g mode, played around with it a bit, switched off 2g mode and now my phone does not see telus at all. When I go into search networks, telus simply doesn't show up and my phone stays in emergency mode.
It sees rogers fine and is able to connect to rogers with a friend's rogers sim. I've tried my telus im in other phones and it works fine, other people's telus sims in my phone don't work either.
I've tried reverting to an earlier backup as well as going back to a stock backup. I've also tried reflashing both the kb1 and kb3 radios, no luck.
Anyone know what might be the issue here?
both Telus / Bell do not have 2G
they only have 3G, as in the VOICE only works via 3G
it was the same using the SGS i9000
Did the rogers SIM work on 2G (Edge) only? I am guessing Rogers and Fido will work, but only on 2G
Same happened to me, on Fido, my phone could no longer connect to 3G...Only 2G after playing with settings. I returned the phone
The reason why Telus-Bell SIM would not work at all at this point is that they only support 3G...
That makes sense, but i don't have it set to 2g mode anymore. It should be seeing 3g just fine.
5h4d0w said:
That makes sense, but i don't have it set to 2g mode anymore. It should be seeing 3g just fine.
Click to expand...
Click to collapse
maybe try to do a factory reset default?
in settings > privacy > format
AllGamer said:
maybe try to do a factory reset default?
in settings > privacy > format
Click to expand...
Click to collapse
Just tried that, nothing. I think that's the same as a wipe data in recovery?
I've tried:
- Reverting back to a stock backup
- Reverting to an earlier working backup
- Doing a factory reset on both of the above
- Reflashing the radio on both
5h4d0w said:
Hi All,
Not quite sure what happened here.. Upgraded to latest nscollab yesterday, everything was working fine. Decided to try the "Antennas" app to see if it'd show where the towers are near me, switched to 2g mode, played around with it a bit, switched off 2g mode and now my phone does not see telus at all. When I go into search networks, telus simply doesn't show up and my phone stays in emergency mode.
It sees rogers fine and is able to connect to rogers with a friend's rogers sim. I've tried my telus im in other phones and it works fine, other people's telus sims in my phone don't work either.
I've tried reverting to an earlier backup as well as going back to a stock backup. I've also tried reflashing both the kb1 and kb3 radios, no luck.
Anyone know what might be the issue here?
Click to expand...
Click to collapse
This just happened to me, I switched to 2G and got nothing but com.android.phone quit errors, now I can't get back on 3G. Flashed radios, data wipe, everything... wtf... it's back to stock now and still can't get on Telus... double wtf...
Christ... finally got it... my head hurts from all this reading
For some reason it was on the wrong band. Do this in dialer... *#*#4636#*#*, phone information, menu, select radio-band, USA, and should work make sure its on WCDMA preferred as well under phone information
KryPTiCk0d3 said:
Christ... finally got it... my head hurts from all this reading
For some reason it was on the wrong band. Do this in dialer... *#*#4636#*#*, phone information, menu, select radio-band, USA, and should work make sure its on WCDMA preferred as well under phone information
Click to expand...
Click to collapse
I had the same issue when in Canada, and forgot I had the band set to Europe (my region).
I set it to Automatic detect, i know catching signal will take longer. But then I dont forget
Sent from my Nexus S using XDA App
i had the same problem since may 14th (sat), thanks for the fix!!!!!!!
Same thing happened here, same solution. Glad you stumbled on it too!
As the title says, had the same problem on my Nexus S (running on Bell), I believe manually switching the 2g/3g toggle in cyanogenmod rom accidentally is what set it off.
Glad you found the solution!! Was maddening for me; knew there must be a way to fix through the UI, but until I fond it, phone was a wifi mp3 player :/

[Q] Mobile data issue

Hey!
I have found a really weird issue since (officially) updating to lollipop (N910C, BOC3). Initially, mobile data worked fine, but after a day or two I noticed, that after going off of wifi, I only got edge connection. I rechecked the settings, restarted the phone but the phone just doesn't go past edge (to 3g or hsdpa; no lte yet for me).
So I then chose to hard reset my phone, wipe cache and reinstall everything. At first, everything went fine and I had H+ connection, no problem. I tried to enable/disable wifi and mobile data a couple of times, but all seemed fine. Today (after 1 day), I noticed again that mobile data is stuck on EDGE.
As far as I remember, everything worked fine on 4.4.4. I even rechecked my sim and settings on my old XperiaZ, where H+ works normally.
Any ideas?
Best regards and ty.
Update: After messing around, I found that by setting the network to wcdma only, allowed the phone to connect to 3g. This means that when left on automatic network mode, the phone choses 2g network and won't switch to 3g even if it is available... Do you guys know a setting where you can tell it to preferentially chose 3g, while on the auto network mode? P.S. I don't have any battery saving options turned on...
Bump... No one knows how to set preferred connection type?
Are you in a room when you are testing? Have you tried to go outside, and while you are connected to edge or H/H+ , open up your internet browser and go to a website and watch your connection if it changes to LTE or 4G...
There is an app that can do what you are asking but you have to root your device in order for it to work... I can't remeber what it's called and I know someone will chime in...
Zigurat said:
Hey!
I have found a really weird issue since (officially) updating to lollipop (N910C, BOC3). Initially, mobile data worked fine, but after a day or two I noticed, that after going off of wifi, I only got edge connection. I rechecked the settings, restarted the phone but the phone just doesn't go past edge (to 3g or hsdpa; no lte yet for me).
So I then chose to hard reset my phone, wipe cache and reinstall everything. At first, everything went fine and I had H+ connection, no problem. I tried to enable/disable wifi and mobile data a couple of times, but all seemed fine. Today (after 1 day), I noticed again that mobile data is stuck on EDGE.
As far as I remember, everything worked fine on 4.4.4. I even rechecked my sim and settings on my old XperiaZ, where H+ works normally.
Any ideas?
Best regards and ty.
Update: After messing around, I found that by setting the network to wcdma only, allowed the phone to connect to 3g. This means that when left on automatic network mode, the phone choses 2g network and won't switch to 3g even if it is available... Do you guys know a setting where you can tell it to preferentially chose 3g, while on the auto network mode? P.S. I don't have any battery saving options turned on...
Click to expand...
Click to collapse
hi ,
one option is if you are rooted is ,( see/read thread )
[APP][5.0+][ROOT] Toggle Network Type 5.0 (2G, 3G, LTE) by dev @cygery
http://forum.xda-developers.com/android/apps-games/widget-toggle-network-type-5-0-xda-t2945406
i have N910F ,rooted on Lollipop BOC3 app works 100% smooth ,no problems ( very impress with app )
good luck
willcor said:
hi ,
one option is if you are rooted is ,( see/read thread )
[APP][5.0+][ROOT] Toggle Network Type 5.0 (2G, 3G, LTE) by dev @cygery
http://forum.xda-developers.com/android/apps-games/widget-toggle-network-type-5-0-xda-t2945406
i have N910F ,rooted on Lollipop BOC3 app works 100% smooth ,no problems ( very impress with app )
good luck
Click to expand...
Click to collapse
Thanks for your suggestion. I am not rooted yet and will try to keep it that way for a little while yet... will see how long i'll last xD
Manual mode will have to suffice for now, seeing as rooting is the only option. Might be a carrier setting related problem =/
Ty

Roaming on VZW after CM13

When I first started using CM13 my signal went to roaming when I know I should have service. I have data roaming off and I've checked to make sure I'm not getting charged for roaming and I'm not. My phone works as it should and I can do everything I need still so I was hoping it would be fixed in one of the new updates. I am on the newest nightly build as of this morning and the R above my signal is still there, just wondering if anyone else is having this problem or know the cause?
I have the same issue on my Nexus 6
Same issue here. Nexus 6 Verizon, just switched to CM13 and I'm stuck on roaming - so far I've tried airplane mode for a minute or two, turning the data off and on, turning the phone off and on, and chatting with Verizon support in case they could do anything remotely. The one thing I haven't done though is try putting another sim card into my phone to see if I could divine any information that way.
Any help would be appreciated.
So after trying just about everything I decided to cave in and jump back to CM12. It was there that I noticed a key difference:
CM12's settings -> mobile network settings, has the following sub-options:
Data Roaming on/off
Preferred Network Type
Enhanced 4G LTE Mode on/off
System select
Access Point Names
CM13 (nightly #2) only has:
Data Roaming
Preferred Network Type
System Select
...while in all honesty I don't know what it all means except to say that it appears to be missing some features of the CM12 nightly I'm using on my Nexus 6 on Verizon. I guess I'll try back in a week or three to see if everything is working fine.
For whatever reason I had LTE pop up for like 2 seconds but went back to R and has stayed since..

Big problem with 2G

Hi everyone !
Lately I went to a place were 3G/4G was not reachable and it is there that i noticed that my brand new Moto X play couldn't get any connection in 2G (GSM) mode even if the place was fully covered with 2G/EDGE (GSM)...
In 3G/4G there is no problem only on 2G (GSM).
I tried in the settings to put 2G (GSM) only and I can not get any signal even now that i'm back home ....
I tried a factory reset from the recovery it did not work :crying: Do you have an idea on how to solve that problem ?
I also tried to use the sim card with another phone in 2G (GSM) and there it works fine with maximal signal ....
Thanks ! :laugh:
Hallo,
I did a test and I got the same "problem".
Turned 4G into 3G...no problem.Still connected..
Turned 3G into 2G....no signal.
Turned 4G into 2G..no signal.
You can try to switch networktype in *#*#4636#*#*
No time for me now....I will try it later on the day.
hostel666 said:
You can try to switch networktype in *#*#4636#*#*
Click to expand...
Click to collapse
I just tried it and turned the networktype to "GSM only" then i got no signal just like before. If i try to use another type like CDMA/GSM it connects to 3G and works but still the problem with the GSM/2G....
Hi guys. I'm not experiencing this problem on my XT1562. switching between bands is fine and working on my device. What kernels are you guys using?
I'm using the stock kernel, I just flashed the OTA (6.0.1) from the stock recovery
Same Problem, more information
For my Moto Play X I have a very similar problem:
4G works, but 3G and 2G do not. If I'm connected to a 4G network, I see that there is reception and can use all data transfer functions. But when I want to do a call, I get a timeout. When I'm in a place where there is no 4G network available, I see that I don't have signal - but the network is shown in the list of available networks for manual selection.
As I have a dual SIM variant (stock ROM, not a custom modification or "upgrade") my second SIM does work like a charm. I tried now and swapped the SIMs - and it seems that just the SIM1 slot is having those problems. The same SIM also works perfectly in the second SIM slot.
I also tries to reset just the network settings (an option provided by the stock ROM) but this didn't change anything.
Next step I'm currently working on is doing a factory reset - will take a while until backup and restore will enable me to see the real result. I'll keep you up to date....
UPDATE: factory reset didn't change anything - will send phone to repair now. :,-(

Mobile data does not work on sprint samsung galaxy s4 with cyanogenmod 12 installed

I picked up an unofficial build of cyanogenmod 12 recently and now I cant connect to data. Texts and calls work fine however. I tried doing airplane mode on/off but that did not seem to work. I also tried switching from 3g to lte in the wireless settings, that didnt work. I also tried using *#*#4636#*#* and tried changing the provider settings thing to CDMA (LTE) and that didnt work. I need help PLEASE. Nothing had worked thus far and my sprint data does not work at all. Please, does anyone have a solution?
I just booted up www.teamoctos.com/oct-n-weekly-lineageos-base/oct-14.1/jfltespr/ and got mobile data on jfltespr

Categories

Resources