Hi all,
It was a few months ago when I fell off my bike to the ground on the side where I had my Z1 in my pocket. It was in a rugged case and the display was facing my body (no direct shock with a solid surface). Since then, my display doesn't show any picture. The touch function works very well and the display is not broken. Also the backlight works sometimes.
What can be a problem here and how can I solve it?
Is it possible to solve this problem without changing the display?
Or if changing the display is the only solution, is there a video to make sure that I can reassemble the mobile well again as the videos available now are for disassembly only?
Thank you very much in advance,
Riko
riko2017 said:
Hi all,
It was a few months ago when I fell off my bike to the ground on the side where I had my Z1 in my pocket. It was in a rugged case and the display was facing my body (no direct shock with a solid surface). Since then, my display doesn't show any picture. The touch function works very well and the display is not broken. Also the backlight works sometimes.
What can be a problem here and how can I solve it?
Is it possible to solve this problem without changing the display?
Or if changing the display is the only solution, is there a video to make sure that I can reassemble the mobile well again as the videos available now are for disassembly only?
Thank you very much in advance,
Riko
Click to expand...
Click to collapse
Search on YouTube, there are vids from disassembling. Maybe reseat the display connector can solve the problem.
Hello,
I have a cheap Yuntab K9 smartwatch. My biggest complaint is the screen doesn't turn on when I raise my wrist. It does have a motion detector, but no option to have the screen turn on. Could flashing it make that possible?
I want to see how much I would use the watch before I invest in a more expensive watch.
Thanks
Hi guys,
Is there really no way to turn off the phone screen when using smart view? I've been searching and there doesn't seem to be any threads in regards to the issue, so hopefully I'm just being stupid.
Surely such an obvious feature can't be missing?
Thanks
JamesPBK - Galaxy S8 Duos (64GB)
you need to install smart view app and configure in settings
With the latest android update, while connected to my tv with smart view (Note 8), my phone screen turns off after a few seconds. How can I set this so that it stays on? (I use it for exercise and sometimes want it on tv and sometimes on my phone. I don't want my phone screen to turn off.)
I've a note8 and I want my screen to be off.. somehow even after the update, my screen is still on. Can anyone point me to the right direction on where is the setting for this? Thanks
raphilevine said:
With the latest android update, while connected to my tv with smart view (Note 8), my phone screen turns off after a few seconds. How can I set this so that it stays on? (I use it for exercise and sometimes want it on tv and sometimes on my phone. I don't want my phone screen to turn off.)
Click to expand...
Click to collapse
That is exactly what I also need - Connected with Smart View my Tab S3 Screen should stay ON - can't figure out how to do that. Is there a way?
Screen locks ...goes dim
Launch the app you want to screen cast then swipe down or up on ur screen...the app you are having trouble with is associated with a game booster .
Click on advanced settings of game booster/ launcher and disable "auto screen lock"
Hi, was wondering if anyone had further answers on this. Particularly the screen going off after few minutes whilst using smart view?. I have tab s3 and it does this whilst using zwift, it does not appear to be linked to a game booster or launcher (or j can't find that setting).
The screen doest lock i just need to swipe it to revive it, but i wish it could stay on so i can use both screens ?
Thanks all
Solved
Its seems there is nothing you can do when smart screen is activated. Even the 'screen always on' apps that are out there are ignored while smart screen is active. Also the alwzys on in developer options is ignored.
However i found a solution with an app called Macrodroid. Create a macro to be trigged when smart screen is running , adding always on screen as the action and its working fine :good::good:
I think this would also work in reverse for those of you who are having problem wiyh screen not dimming or going standby
Johnnyg48 said:
Solved
Its seems there is nothing you can do when smart screen is activated. Even the 'screen always on' apps that are out there are ignored while smart screen is active. Also the alwzys on in developer options is ignored.
However i found a solution with an app called Macrodroid. Create a macro to be trigged when smart screen is running , adding always on screen as the action and its working fine :good::good:
I think this would also work in reverse for those of you who are having problem wiyh screen not dimming or going standby
Click to expand...
Click to collapse
This did not work for me. The Macrodroid isn't even recognizing Smart View being opened.
Hello everyone.
I've been using my Joying JY-UL1282N2 for a couple of years now, and I'm really happy with it. But last week the screen has been making problems. I feel that there's a contact issue which causes the screen to suddently turn off. Pressing on the bottom of the screen bezel causes the screen to work fine. The touchscreen works all the time, even when the screen is off.
Here's a video showing the problem:
https://youtu.be/7Le8yL6SvWA
I think it's a hardware issue. Is there a simple way to fix this? I really have no need to upgrade the unit, it's still running the stock ROM too.
Thanks for any help!
Hi all
I bought the new crosscall action x5 ..lovely phone ...but I have one big issue....
Sometime -if I try to switch on my phone (not the restart-the normally wake up) the display is not switching on... I see only very low backlight ...but no normally display. Sometimes photo function is running also without display ... Have anyone an idea how I can solve this issue ? Thanks a lot best